Preparation and preliminary characterization of poly(ethylene glycol)-pepstatin conjugate

The carboxyl function of pepstatin has been coupled, through an amide bond, to methoxypoly(ethylene glycol) (5 kDa), to which an amino function had been previously grafted. The mPEG-pepstatin conjugate inhibits hog pepsin (aspartic proteinase) in vitro as pepstatin itself, however, with a 400 times higher apparent K_i. The conjugate apparently does not inhibit proteinases belonging to other proteinase families such as serine (trypsin, carboxypeptidase Y), cysteine (Papaya proteinase III), or metallo (collagenase) proteinases.     

Segmented block copolymers of poly(ethylene glycol) and poly(ethylene terephthalate)

A new series of segmented copolymers were synthesized from poly(ethylene terephthalate) (PET) oligomers and poly(ethylene glycol) (PEG) by a two‐step solution polymerization reaction. PET oligomers were obtained by glycolysis depolymerization. Structural features were defined by infrared and nuclear magnetic resonance (NMR) spectroscopy. The copolymer composition was calculated via ¹H NMR spectroscopy. The content of soft PEG segments was higher than that of hard PET segments. A single glass‐transition temperature was detected for all the synthesized segmented copolymers. This observation was found to be independent of the initial PET‐to‐PEG molar ratio. The molar masses of the copolymers were determined by gel permeation chromatography (GPC). © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4448–4457, 2004     

紫外光交联可降解聚对二氧环己酮/聚乙二醇薄膜制备与表征

以2,2-二甲氧基-2-苯基苯乙酮(DMPA)为引发剂,将四臂端丙烯酸酯聚对二氧环己酮(PPDO-4AC)和聚乙二醇双丙烯酸酯(PEG-DA)经紫外光照射制得PPDO/PEG交联薄膜.研究了光照时间和DMPA用量对PPDO/PEG交联薄膜凝胶含量的影响.DSC研究表明共聚物中两组分的相容性较好,Tg随着共聚物中PEG链...     

Synthesis and characterization of poly(ethylene glycol) methyl ether endcapped poly(ethylene terephthalate)

Linear and branched poly(ethylene terephthalate) (PET) copolymers with polyethylene glycol) (PEG) methyl ether (700 or 2000 g/mol) end groups were synthesized using conventional melt polymerization. DSC analysis demonstrated that low levels of PEG end groups accelerated PET crystallization. The incorporated PEG end groups also decreased the crystallization temperature of PET dramatically, and copolymers with a high content of PEG (>17.6 wt%) were able to crystallize at room temperature. Rheological analysis demonstrated that the presence of PEG end groups effectively decreased the melt viscosities and facilitated melt processing. XPS and ATR-FTIR revealed that the PEG end groups tended to aggregate on the surface, and the surface of compression molded films containing 34.0 wt% PEG were PEG rich (85 wt% PEG). PEG end-capped PET (34.0 wt% PEG) and PET films were immersed into a fibrinogen solution (0.7 mg/mL BSA) for 72 h to investigate the propensity for protein adhesion. XPS demonstrated that the concentration of nitrogen (1.05%) on the surface of PEG endcapped PET film was statistically lower than PET (7.67%). SEM analysis was consistent with XPS results, and revealed the presence of adsorbed protein on the surface of PET films.     

Surface modification of polyethersulfone membranes by blending triblock copolymers of methoxyl poly(ethylene glycol)-polyurethane-methoxyl poly(ethylene glycol)

The surface of polyethersulfone (PES) membrane was modified by blending triblock copolymers of methoxyl poly(ethylene glycol)-polyurethane-methoxyl poly(ethylene glycol) (mPEG-PU-mPEG), which were synthesized through solution polymerization with mPEG Mns of 500 and 2000, respectively. The PES and PES/mPEG-PU-mPEG blended membranes were prepared through spin coating coupled with liquid-liquid phase separation. FTIR and (1)H NMR analysis confirmed that the triblock copolymers were successfully synthesized. The functional groups and morphologies of the membranes were studied by ATR-FTIR and SEM, respectively. It was found that the triblock copolymers were blended into PES membranes successfully, and the morphologies of the blended membranes were somewhat different from PES membrane. The water contact angles and platelet adhesion were decreased after blending mPEG-PU-mPEG into PES membranes. Meanwhile, the activated partial thromboplastin time (APTT) for the blended membranes increased. The anti-protein-fouling property and permeation property of the blended membranes improved obviously. SEM observation and 3-(4, 5-Dimethylthiazol-2-yl)-2, 5-diphenyl tetrazolium bromide (MTT) assay proved the surfaces of the blended membranes promoted human hepatocytes adhesion and proliferation better than PES membrane.     

Vibrational analysis of molten poly(ethylene glycol)

The infrared absorption of poly(ethylene glycol) was measured in the molten state. Characteristic bands of the molten state were identified. Normal vibrations and frequency distributions were treated for various conformation models with CH₂CH₂O repeat units. The infrared absorption peaks of the molten state closely correspond to the frequency distribution peaks of the TGT conformation with gauche O? CH₂? CH₂? O groups, although infrared bands due to trans O? CH₂? CH₂? O groups are also observed. Vibrational assignments of the infrared bands and Raman lines were made on the basis of potential energy distributions.     

Crystallization of photo-chain extended poly(ethylene glycol)

Coumarin-functionalized poly(ethylene glycol) (PEG) monols and diols were isothermally crystallized at temperatures between 20 and 35 °C before and after exposure to approximately 110 J cm⁻² of ultra-violet A (λ > 300 nm, UVA) irradiation. Irradiation dimerized the coumarin groups and chain-extended the coumarin-functionalized PEG oligomers. The higher molecular weights reduced the crystal growth rate by as much as 50% compared to the non-irradiated coumarin-functionalized PEG oligomers under ambient crystallization conditions. Hoffman’s kinetic nucleation theory was utilized to evaluate the types of nucleation that occurred for the coumarin-functionalized PEG diols (COU-PEG-COU). Crystallization regimes II and III were observed for the coumarin-modified PEG oligomers before and after exposure to UVA light.     

Synthesis and characterization of poly(ethylene glycol) grafted poly(L-lactide)

Poly(ethylene glycol) grafted poly(L -lactide) was prepared by ring opening polymerization of L -lactide and epoxy-terminated poly(ethylene glycol) methyl ether (PEGME). Stannous octoate and Al(Et)₃·0.5 H₂O were tested as polymerization catalysts, and Al(Et)₃·0.5 H₂O was found to be more effective for the ring-opening of the epoxy group of the modified PEGME monomer. The synthesized polymers were characterized by NMR and the efficiency of the incorporation of epoxy-terminated PEGME in the copolymer was determined.     

Phase separation in mixtures of poly(ethylene glycol monomethylether) and poly(propylene glycol) oligomers

Time-resolved light scattering was employed to investigate kinetics of phase separation in mixtures of poly (ethylene glycol monomethylether) (PEGE)/poly (propylene glycol) (PPG) oligomers. Phase diagrams for PEGE/PPG of varying molecular weights were established by means of cold point measurements. The oligomer mixtures reveal an upper critical solution temperature (UCST). Several temperature quench experiments were carried out with a 60/40 PEGE/PPG blend by rapidly quenching from a single phase (69°C) to two-phase temperatures (66–61°C) at 1°C intervals. As is typical for oligomer mixtures, the early stage of spinodal decomposition (SD) was not detected. The kinetics of phase decomposition was found to be dominated by the late stage of SD. Time-evolution of scattering intensity was analyzed in accordance with nonlinear and dynamical scaling theories. The time dependence of the peak intensity I_m and the corresponding peak wavenumber q_m was found to follow the power-law {I_m(t)? t^α, q_m(t)? t^-β} with the values of α = 3 ± 0.3 and β = 1 ± 0.2, which are very close to the values predicted by Siggia. This process has been attributed to a coarsening mechanism driven by surface tension. In the temporal scaling analysis, the structure function reveals university with time, suggesting self-similarity. Phase separation dynamics in 60/40 PEGE/PPG resembles the behavior predicted for off-critical mixtures.     

Depolymerisation of poly(ethylene terephthalate) fibre wastes using ethylene glycol

Poly(ethylene terephthalate) [PET] fibre wastes from an industrial manufacturer was depolymerised using excess ethylene glycol [EG] in the presence of metal acetate as a transesterification catalyst. The glycolysis reactions were carried out at the boiling point of ethylene glycol under nitrogen atmosphere up to 10 h. Influences of the reaction time, volume of EG, catalysts and their concentrations on the yield of the glycolysis products were investigated. The glycolysis products were analysed for hydroxyl and acid values and identified by different techniques, such as HPLC, ¹H NMR and ¹³C NMR, mass spectra, and DSC. It was found that the glycolysis products consist mainly of bis(hydroxyethyl)terephthalate [BHET] monomer (>75%) which was effectively separated from dimer in quite pure crystalline form.     

Preparation and aggregation behavior of mannose-terminated poly(ethylene glycol)-b-poly(L-leucine) in water

Amphiphilic diblock copolymers composed of poly(ethylene glycol) (PEG) and poly(l-leucine) (PLeu) with mannose at the chain end of PEG were synthesized by a combination of ring-opening polymerization (ROP) and click chemistry. First, an α-azido, ω-amino PEG (N(3)-PEG-NH(2)) was synthesized and converted to the corresponding amine hydrochloride (N(3)-PEG-NH(2)·HCl), which was used as a macroinitiator to initiate the ROP of L-leucine-N-carboxyanhydride (Leu-NCA), yielding three amphiphilic block copolymers with different chain lengths of PLeu (N(3)-PEG-b-PLeu). Then, click chemistry of the alkynyl mannose with N(3)-PEG-b-PLeu anchored a mannose moiety to the PEG chain end of the copolymer. The self-assembly behavior of these copolymers in water was investigated using transmission electron microscopy (TEM), laser light scattering (LLS) and circular dichroism (CD). Depending on the copolymer composition and the initial concentration of the copolymer in organic solvent, different morphologies (e.g. spherical micelle, wormlike micelle) were observed. The aggregation behavior was demonstrated to be controlled by secondary structure formation and the hydrophobic interactions of the PLeu segments. With mannose moieties on the surface of the aggregates, these aggregates could bind reversibly the lectin Concanavalin A (Con A).     

Micropallet arrays with poly(ethylene glycol) walls

Arrays of releasable micropallets with surrounding walls of poly(ethylene glycol) (PEG) were fabricated for the patterning and sorting of adherent cells. PEG walls were fabricated between the SU-8 pallets using a simple, mask-free strategy. By utilizing the difference in UV-transmittance of glass and SU-8, PEG monomer was selectively photopolymerized in the space surrounding the pallets. Since the PEG walls are composed of a cross-linked structure, the stability of the walls is independent of the pallet array geometry and the properties of the overlying solution. Even though surrounded with PEG walls, the individual pallets were detached from the array by the mechanical force generated by a focused laser pulse, with a release threshold of 6 microJ. Since the PEG hydrogels are repellent to protein adsorption and cell attachment, the walls localized cell growth to the pallet top surface. Cells grown in the microwells formed by the PEG walls were released by detaching the underlying pallet. The released cells/pallets were collected, cultured and clonally expanded. The micropallet arrays with PEG walls provide a platform for performing single cell analysis and sorting on chip.     

Preparation and Characterization of Chitosan Composite Membranes Crosslinked by Carboxyl-capped Poly（ethylene glycol）

In this study a series of chemically crosslinked chitosan/poly（ethylene glycol） （CS/PEG） composite membranes were prepared with PEG as a crosslinking reagent other than an additional blend. First, carboxyl-eapped poly（ethylene glycol） （HOOC-PEG-COOH） was synthesized. Dense CS/PEG composite membranes were then prepared by casting/evaporation of CS and HOOC-PEG-COOH mixture in acetic acid solution. Chitosan was chemically crosslinked due to the amidation between the carboxyl in HOOC-PEG-COOH and the amino in chitosan under heating, as confirmed by FTIR analysis. The hydrophilicity, water-resistance and mechanical properties of pure and crosslinked chitosan membranes were characterized, respectively. The results of water contact angle and water absorption showed that the hydrophilicity of chitosan membranes could be significantly improved, while no significant difference of weight loss between pure chitosan membranes and crosslinked ones was detected, indicating that composite membranes with amidation crosslinking possess excellent water resistanance ability. Moreover, the tensile strength of chitosan membranes could be significantly enhanced with the addition of certain amount of HOOC-PEG-COOH crosslinker, while the elongation at break didn＇t degrade at the same time. Additionally, the results of swelling behaviors in water at different pH suggested that the composite membranes were pH sensitive.     

Synthesis and characterization of poly(ethylene glycol) derivatives

Five general routes for the preparation of polyoxyethylene [generally referred to as poly(ethylene glycol) or PEG] derivatives are described. These routes are (1) nucleophilic displacements with the alkoxide of PEG, (2) nucleophilic displacement on PEG–tosylate, –mesylate, or –bromide, (3) reductive amination of PEG–aldehyde, (4) reductive amination of PEG–amine, and (5) nucleophilic displacements on the s-triazine derivatives prepared from s-triazine trichloride (cyanuric chloride) and PEG. Eighteen derivatives are prepared and potential applications to catalysis, cell purifications, and other areas are discussed briefly.     

Complex formation of daunomycin with poly(vinylpyrrolidone) and poly(ethylene glycol)

Russian Journal of General Chemistry - Complexes of the anthracycline antitumor antibiotic daunomycin with biocompatible polymer carriers, poly(vinylpyrrolidone) and poly(ethylene glycol), have...     

Preparation of poly(ethylene glycol)-modified poly(amido amine) dendrimers encapsulating gold nanoparticles and their heat-generating ability

Loading of HAuCl4 in poly(amido amine) G4 dendrimers having poly(ethylene glycol) (PEG) grafts at all chain ends and subsequent reduction with NaBH4 yielded PEG-modified dendrimers encapsulating gold nanoparticles (Au NPs) of ca. 2 nm diameter. The Au NPs held in the dendrimers were stable in aqueous solutions and dissolved readily, even after freeze-drying. Despite their small particle size, the heat-generating ability of Au NPs held in the dendrimer was comparable to that of widely used Au NPs with ca. 11 nm diameter under visible light irradiation. The observed excellent colloidal stability, high heat-generating ability and their biocompatible surface confirm that the PEG-modified dendrimers encapsulating Au NPs are a promising tool for photothermal therapy and imaging.     

Antifriction properties of fluorine-containing poly(ethylene glycol) esters

Equilibrium mixtures of fluorine-containing mono- and diesters based on poly(ethylene glycol) (M = 1000) were synthesized. The effect of these compounds on antifriction properties of industrial oil was studied.     

Thermogelling polymers composed of poly(cyclohexylenedimethylene adipate) and poly(ethylene glycol)

Block copolymers composed of hydrophilic poly(ethylene glycol) (PEG) and hydrophobic biodegradable polyesters have been reported as thermogelling polymers, because they feature temperature-dependent sol-to-gel or gel-to-sol transitions in aqueous solutions. In this study, a series of thermogelling poly(ethylene glycol methyl ether)-block–poly(cyclohexylenedimethylene adipate)-block–poly(ethylene glycol methyl ether) triblock copolymers and PEG-block–poly(cyclohexylenedimethylene adipate) multiblock copolymers was synthesized by reacting hydroxyl-terminated poly(cyclohexylenedimethylene adipate) (PCA) with poly(ethylene glycol methyl ether) and PEG, respectively, using 1,6-diisocyanatohexane as the coupling agent. Two hydroxyl-terminated PCAs, i.e., poly(1,4-cyclohexylenedimethylene adipate) and poly(1,3/1,4-cyclohexylenedimethylene adipate), were synthesized by the condensation reaction of adipic acid (AA) with 1,4-cyclohexanedimethanol (CHDM) and 1,3/1,4-CHDM, respectively, and used as the hydrophobic polyester blocks of these thermogelling copolymers to compare the effect of crystallinity on the sol-to-gel transition behavior.The polymers were characterized using proton nuclear magnetic resonance, Fourier transform infrared spectroscopy, gel permeation chromatography, differential scanning calorimetry, solubility testing, and rheological analysis. Experimental results revealed that the structure of the PCA block (crystalline vs. amorphous), the molecular weights of the hydrophobic PCA and hydrophilic PEG blocks, and the type of thermogelling polymer (triblock vs. multiblock) influenced the solubility, polymer micelle packing characteristics, maximum storage modulus, and sol-to-gel temperature of the polymers. Among all the samples at 40 wt.% aqueous solutions, triblock copolymer TB3 showed sol-to-gel temperature at 22 °C, and had the highest maximum storage modulus about 170 Pa.     

Preparation, characterization and application of pyrene-loaded methoxy poly(ethylene glycol)–poly(lactic acid) copolymer nanoparticles

Pyrene-loaded biodegradable polymer nanoparticles were prepared by incorporating pyrene into the polymer nanoparticles formulated from amphiphilic diblock copolymer, methoxy poly(ethylene glycol)–poly(lactic acid) (MePEG–PLA). Their morphological structure and physical properties were characterized by nuclear magnetic resonance (NMR), dynamic light scattering, fluorescence spectroscopy, transmission electronic microscopy and zeta potential measurements. Further, MePEG–PLA nanoparticles containing pyrene as fluorescent marker were administered intranasally to rats, and the distribution of nanoparticles in the nasal mucosa and the olfactory bulb were visualized by fluorescence microscopy. NMR results confirmed that MePEG–PLA copolymer can form nanoparticles in water, and hydrophilic PEG chains were located on the surface of the nanoparticles. The particle size, zeta potential and pyrene loading efficiency of MePEG–PLA nanoparticles were dependent on the PLA block content in the copolymer. Following nasal administration, the absorption of nanoparticles across the epithelium was rapid, with fluorescence observed in the olfactory bulb at 5 min, and a higher level of fluorescence persisted in the olfactory mucosa than that in the respiratory mucosa. These results show that pyrene could serve as a useful fluorescence probe for incorporation into polymer nanoparticles to study tissue distribution and MePEG–PLA nanoparticles might have a great potential as carriers of hydrophobic drugs.