Retention in capillary supercritical fluid chromatography

Supercritical fluid chromatography (SFC) sometimes exhibits GC-like behavior and sometimes LC-like behavior, depending on conditions. However, it is not always clear whether one of these types of behavior, or a combination, operates for a particular set of conditions for every solute in a mixture. For example, some components may be partitioned mostly by their vapor pressures, while others, in the same mixture, are partitioned predominantly by solvent-like properties of the mobile phase. Plots of retetion (as log of the capacity factor) vs. reciprocal temperature at constant pressure reveal a clear change in the character of the separation of well-behaved solutes. A thermodynamic explanation of the observed behavior is given, based on the assumption that partitioning is controlled by the heats of solution of solute in the mobile and stationary phases. A model of SFC retention as it deviates from pure-GC behavior on the same column is presented.     

Splitless injection in capillary supercritical fluid chromatography

A splitless injection technique, allowing 0.5 μl injections on 50 μm i.d. columns, has been developed.     

Temperature programming elution in capillary supercritical fluid chromatography

Summary Effects of column temperature on the retention behaviour of aromatic hydrocarbons and dialkyl phthalates were investigated in capillary supercritical fluid chromatography (SFC) with carbon dioxide as the mobile phase. Negative temperature programming could partly replace pressure programming. Positive temperature programming was applicable to solutes with proper volatility, in which gas chromatography-like retention mechanism (partition process) was involved.     

On-line multidimensional supercritical fluid chromatography/capillary gas chromatography

A new analytical technique combining on-line supercritical fluid chromatography with capillary gas chromatography has been developed. The supercritical fluid sample effluent is decompressed through a restrictor directly into a conventional capillary gas chromatographic injection port. This technique allows for not only direct (100%) sample transfer from the supercritical fluid chromatograph to the gas chromatograph but also for selective or multi-step heartcutting of various sample peaks as they elute from the supercritical fluid chromatograph. Heartcut times are determined by monitoring the responses from the flame ionization or ultraviolet absorbance detectors on the supercritical fluid chromatograph. This report describes the operational setup and provides the results of heartcut reproducibility experiments using normal hydrocarbon and aromatic test mixtures. Results from studies where operational parameters were varied, such as GC injector temperature, will also be provided. The potential usefulness of this new technique for selective heartcutting will also be demonstrated using complex hydrocarbon streams.     

Modifier effects on packed and capillary columns in supercritical fluid chromatography

Summary The separation of polar thermally labile solutes is one of the potentially most rewarding fields of SFC application. A presupposition for such applications is, however, mobile phases having relatively high solvent strengths. A promising approach to achieve this is the use of mobile phases consisting of carbon dioxide with a polar additive. In this work, the chromatographic effects of different concentrations of an additive, isopropanol, in carbon dioxide have been studied on capillary and packed columns. A series of antibiotics was used as test substances. Best results were obtained with carbon dioxide/8% isopropanol as mobile phase on a capillary column coated with a cyanopropyl-substituted polysiloxane stationary phase.     

Introduction of large sample volumes in capillary supercritical fluid chromatography

A splitless injection method using make-up flow was developed for SFC. Dilution of sample solvent with carbon dioxide mobile phase was very effective for focusing the solutes onto the column. Injection of a 4.5-μl sample volume on a 100-μm i.d. capillary column became possible.     

Deactivation of small-diameter fused-silica capillary columns for gas and supercritical fluid chromatography

Summary In order to prevent plugging during deactivation of small diameter (50 m i.d.) capillary columns for gas and supercritical fluid chromatography, various high temperature deactivation methods were employed. Pure hexamethyldisilazane and hexamethyldisiloxane (a substitute for D₄) were dynamically coated on the column, while a film (0.05 m) of OV-101 was statically coated, before high temperature (450°C) treatment. Excellent deactivated columns were obtained, and no significant difference in column activity was observed using any of these three methods.Dedicated to Professor S. R. Lipsky on the occasion of his 60th birthday.     

Low flow rate modifier addition in packed capillary column supercritical fluid chromatography

A new method to accurately deliver small amounts (0.5 to 20 mol%) of modifier into CO₂ was used to study the effects of three different modifiers (methanol, water, and formic acid) in packed capillary column SFC. The method allows the use of different modifiers, with minimal instrument modification. The effects of the different modifiers at different concentrations on retention and peak shape are shown by analyzing a polarity test mixture and a sample of free fatty acids.     

Effect of column diameter on efficiency in capillary supercritical fluid chromatography

Fused silica capillary columns with internal diameters from 100 to 25 μm were coated with SE-54 and evaluated under supercritical fluid chromatographic conditions using carbon dioxide as mobile phase. Experimental results compared well with theoretical predictions. At ten times the optimum mobile phase velocity and for a capacity factor, k of 3, efficiencies of 2300 to 5600 plates m^?1 were obtained for column diameters of 100 to 25 μm, respectively.     

Serially coupled capillary columns supercritical fluid chromatography with midpoint pressure control

Two capillary columns of different polarities were coupled in series by means of a coupling restrictor. The pressure of the first column and the midpoint pressure (between the coupling restrictor and the second column) were controlled independently of each other using two pumps. The selectivity of this separation system was highly dependent on the pressure difference and could be continuously changed between those of two columns. The pressure difference could be changed even in course of separation for fine tuning of the selectivity. Several examples were shown to demonstrate the utility of this method.     

Retention in coupled capillary column supercritical fluid chromatography with lipids as model compounds

Summary We have investigated to which extent retention data, acquired on single capillary columns, can be used for predicting retention factors in a coupled column system. For this purpose we utilized a model mixture of 18 lipid components with widely different vapor pressures and polarities. The sample was chromatographed on two columns, SB-biphenyl-30 (70% methyl-30% biphenylpolysiloxane) and SB-cyanopropyl-50 (50% methyl-50% cyanopropylsiloxane). Experimental retention factors, acquired in coupled column systems with two columns connected in different order, were thus compared with values calculated from runs on each single column. The agreement between calculated and experimental values generally was better than 5% without any pressure drop correction.To study the possibility of predicting retention behavior in a wide pressure range from a limited number of experiments, we also investigated the relation between solute retention and mobile phase density. We found that all data could be fitted to second order equations, which gives the possibility to optimize the resolution with respect to pressure from a limited number of runs at different pressures.     

Enhancement of sensitivity in capillary supercritical fluid chromatography through optimization of injection and detection techniques

The reproducibility of peak areas as a function of the technique used for sample injection was investigated in capillary supercritical fluid chromatography (SFC). An injection technique has been developed to increase the volume of sample introduced into the capillary column. Using a modified time-split injection technique, long injection duration times were successfully applied to achieve lower detection limits. Analytes were effectively focused at the head of the analytical column using a unique pressure trap program. Because this on-column focusing was performed only by pressure and temperature programming, no instrumental modifications were necessary. Up to 1.0 μL of sample solution was injected onto 50 μm i.d. columns using this technique, with no observable peak splitting. Dual detection using ultraviolet (UV) absorption and flame ionization detection (FID) was performed in series, thereby avoiding the necessity of splitting the column effluent. For the compounds investigated (five nitroaromatics and one phthalate ester), the absolute sensitivity of the UV detector was significantly greater than that of the FID.     

Supercritical ammonia as mobile phase in capillary chromatography

Instrumentation was assembled that allows the use of supercritical ammonia as mobile phase in capillary supercritical fluid chromatography. Several modifications of the typical chromatographic system were necessary, especially with respect to injection and detection. In addition, the stabilities of various polysiloxane stationary phases were studied. The chromatography of polarizable and polar basic materials was demonstrated using a nonpolar polysiloxane stationary phase.     

Modified flame ionization detector for the analysis of large molecular weight polar compounds by capillary supercritical fluid chromatography

The modifications made to a flame ionization detector (FID) to facilitate the detection of large molecular weight polar compounds analyzed by capillary supercritical fluid chromatography are described. Some specific examples are given to demonstrate that polar compounds can be effectively eluted using deactivated fused silica capillary columns and supercritical carbon dioxide at 40°C.     

Effect of stationary phase film thickness on efficiency in capillary supercritical fluid chromatography

Fused-silica capillary columns with internal diameters of 50 μm were coated with 0.25 to 1.0 μm films of SE-54 and evaluated under supercritical fluid chromatographic conditions using carbon dioxide as mobile phase. Experimental results compared well with theoretical predictions. There was no significant difference in h_min or ū_opt for film thicknesses from 0.25 to 1.0 μm over k = 1 to 5. At a film thickness of 1.0 μm, calculations indicate that approximately 10% resolution loss would be expected for solutes with k = 1.     

Capillary supercritical fluid chromatography with simultaneous flame ionization and mass spectrometric detection

A simple interface between a capillary supercritical fluid chromatograph and an Extranuclear Simulscan mass spectrometer is described. The SFC column is directly inserted into the ion source through the existing GC-interface. The system is equipped with a splitting device which allows simultaneous EI/MS and flame ionization detection when CO₂ is used as the supercritical phase. The effect of source temperature and pressure on CO₂ clustering was studied for optimization of source conditions. The performance of the system was evaluated with a series of model compounds and standard mixtures.