Effect of gegen ion in cationic polymerization and copolymerization of trioxane

p-Chlorophenyldiazonium hexafluorophosphate has been reported to be a superior catalyst for cationic polymerization and copolymerization of trioxane as compared to boron trifluoride dibutyl etherate (BF₃·Bu₂O)¹. In the present investigation the effect of anions derived from elements in Group VA, AsF and SbF, has been ascertained. It has been concluded that p-chlorophenyldiazonium hexafluoroarsenate is also a superior catalyst to boron trifluoride dibutyletherate (BF₃·Bu₂O), while p-chlorophenyl-diazonium hexafluoroantimonate is inferior. Copolymers with the highest polymer yield (>95%) and molecular weight (intrinsic viscosity = 4 to 5) were obtained with Simple dependences on catalyst concentration have been observed to hold for a wide catalyst concentration range ([M]/[C]) = (1 to 20) × 10⁵: For the same relationships hold. However, the polymer yield (75%) and molecular weights (intrinsic viscosity ?1) are considerably lower while the extent of chain transfer is higher. Furthermore, the polymerization proceeds with explosive violence. The quantitative aspects resulting from polymerization, for the most part, can be interpreted in terms of the extent of dissociation of the propagating ions.     

Zur Darstellung von Cyclophosphaten,Cyclophosphatophosphonaten, Diphosphonaten und Diphosphiten in Harnstoffschmelzen

Preparation of Cyclophosphates, Cyclophosphatophosphonates, Diphosphonates, and Di-phosphites in Urea Melts Ammonium cyclotriphosphate (NH₄)P₃O₉, ammonium cyclotetraphosphate [P^IV? P^IV ? O? ]₂, ammonium cyclotriphosphatophosphonates Ammonium organyldiphosphonates And ammonium diphosphites are prepared in high yields on heating acidic phosphates, phosphonates, and phosphites in urea or urea/ammonium nitrate melts. The mechanism of the dehydration of phosphorus compounds containing POH groups in molten urea is discussed.     

Kinetics,mechanism, and endo selectivity of Diels–Alder reactions of alkylmonosubstituted ethenes with cyclohexa-1,3-diene in the gas phase

The reactions where Y = CH₃ (M), C₂H₅ (E), i? C₃H₇ (I), and t? C₄H₉ (T) have been studied between 488 and 606 K. The pressures of CHD ranged from 16 to 124 torr and those of YE from 57 to 625 torr. These reactions are homogeneous and first order with respect to each reagent. The rate constants (in L/mol·s) are given by The Arrhenius parameters are used as a test for a biradical mechanism and to discuss the endo selectivity of the reactions.     

Fluorsulfonylstickstoffverbindungen

The reactions of fluorosulfonylurea derivatives with phosphorus pentachloride in carbon tetrachloride leads to and . These compounds are easily fluroinated by arsenic trifluoride to the corresponding fluorosulfonyl derivatives. It was shown that PCl₅ is reliable for the fluorine-chlorine exchange. Isocyanate esterchlorides as well as carbonyl-fluoride derivatives react with compounds which have an active hydrogen atom. By this way were prepared: . By hydrolysis of , is probably formed as the first reaction product. The acid could be trapped with tetraphenylphosphoniumchloride as a well-cristalline salt. Fluorosulfonyl isocyanate reacts with aldehydes to the following compounds: FSO₂N ? CHCH₃, FSO₂N ? CHC₂H₅, FSO₂N ? CH? CH(CH₃)₂ and FSO₂N ? CHC₆H₅. The physical and chemical properties as well as IR and NMR spectra of the compounds are described and, in part, compared and discussed.     

Darstellung und Eigenschaften von Ti-substituierten N-Heterocyclen

Preparation and Properties of Ti-substituted N-Heterocycles The compounds (x = 2 to 6) have been prepared by transamination of Ti(NMe₂)₄ with the heterocyclic amines and have been characterised by elemental analyses and ¹H NMR and IR spectroscopy. The dependence on both x and n of the thermal decomposition has been studied for the series and . The results can be interpreted in terms of the steric strain of the R₂N and substituents. Apart from the piperidido groups none of the ligands exhibit protective group properties comparable to the R₂N groups.     

Some new examples of cationic polymerization

Synthesis and properties of cis-and trans-methoxyvinyl chloride (MVC) are described. Both of these monomers can be polymerized with cationic initiators. From the ¹³C-NMR spectra it was concluded, that poly-(trans-MVC) is mainly threo-diisotactic. Copolymerization of cis-MVC with for instance trans-MVC or styrene or 1,3-dioxolane is also described. The ring-opening polymerization of 2-phenyl-2-oxazoline under different conditions was investigated. The molecular weights, determined by light-scattering and GPC are in the range between 10 000 and 350 000. A[η] -M- equation was derived. By hydrolysis with hydrochlorid acid high molecular weight poly(iminoethylene) was obtained. The ring-opening polymerization of 1-azabicyclooctane [4.2.0] (conidine) with different catalysts as well as the properties of the polymers were studied in detail. By means of a “mixed-mechanism technique” well defined styrene-conidine diblock copolymers are available.     

Modification of poly(vinyl alcohol) through reaction with phosphorus-containing reactants

Crosslinked products of the form: and have been formed from the interfacial condensation of phosphorus diacid halides with poly(vinyl alcohol). Product yield and amounts of phosphorus reactant included in the product increases as the amount of base increases. Product stability in aqueous systems decreases in the order neutral > base > acid.     

Metastable decompositions of cyclopentanol ions and [C5H10O]+˙ ions with the oxygen on the first carbon

Ionized cyclopentanol and [C₅H₁₀O]+˙ ions with the oxygen on the first carbon lose methyl, ethylene, ethyl, ethane and water in their metastable decompositions. We show by collisionally activated decompositions of the products that the losses of ethyl form CH₃CH₂C?O⁺, the losses of ethylene form , and the losses of methyl probably yield . Deuterium labeling indicates that ethyl loss from ionized cyclopentanol occurs following α-cleavage of the ring, isomerization to the enol isomer of ionized n-pentanal and subsequent isomerization to the 3-pentanone ion.     

[2, 3] Sigmatropic Rearrangements on Lithiation of Some Allyl Sulfides. Preliminary communication

In five cases, [2,3] sigmatropic rearrangement of the type has been observed.     

The loss of CH3⋅ from some unsaturated dithioesters

The mechanism for the loss of CH₃? (and C₂H₅?) from the molecular ions of some unsaturated dithioesters of the type with n=0, 1, 2, has been studied. Based on first field free region metastable ion characteristics it is proposed that 1,3-dithiolium type product ions are generated. Deuterium labelling experiments indicated that the molecular ions of the 2-alkenyl alkanedithioates undergo a rearrangement prior to fragmentation which resembles the [3,3]sigmatropic rearrangement in solution chemistry.     

Massenspektrometrische Untersuchung organischer Stickstoffverbindungen. XXVII—Intramolekulare Redoxreaktionn bei ionisierten ortho-substituierten Nitroaromaten

Collisional activation demonstrates that the stable ions from o-nitrobenzaldehydedimethylacetale possess the structure of ionized o-nitroso benzoic acid methyl ester. Contrary to previous conclusions it is demonstrated that the structure of the stable ions (m/e 135) from different precursors [i.e. o-nitrobenzyl alcohol o-nitrobenzyl cyanide and o-nitrobenzaldoxime is best represented by 2,1-benzisoxazoline-3-one. Ionized o-nitrosobenzaldehtde rearranged to 2,1-benzisoxazoline-3-one prior to collision induced decomposition, whereas 2-benzoxazolinone and 3-hydroxy-1,2-benzisoxazole do not rearrange within 10^?5 s.     

Synthesis and psychotropic properties of furyl- and thienyl-germatranes

Trihalogermyl-furans and -thiophenes were prepared by inserting germanium dibromide (GeBr₂) generated from the dibromogermane(II) dioxanate complex into the carbon-halogen bond of halo-furans and -thiophenes. Their ethanolysis and transesterification by triethanolamine yielded the germatranes which were subjected to psychotropic activity assays. The psychotropic properties of germatranes were found to depend on the type of the heterocycle and on the position of the germatrane moiety.     

Molecular confirmation and crystal structure of the β form of poly(ethylene oxybenzoate)

The crystal structure of the β form of poly(ethylene oxybenzoate) was analyzed by x-ray diffraction. Four nearly extended molecular chains pass through a unit cell with parameters a = 8.19 Å, b = 11.07 Å, c (fiber axis) = 19.05 Å, β = 114.8°, and the space group P2₁/n-C. The structural difference between the α and β forms is mainly due to the internal rotation angles for the virtual bond and the ? CH₂? CH₂? bond. They are essentially in trans confirmation in the β form, while the α form contains cis and gauche (? CH₂? CH₂? ) conformations.     

Ion pair catalysis of the autooxidative cleavage of benzoin in emulsion systems

A study was made of the autooxidation of benzoin in organic-aqueous sodium hydroxide emulsions in the presence of several quaternary ammonium salts. The rate of the reaction was found to be accelerated by these salts, probably by ion pair extraction. In pyridine and acetonitrile systems the reaction was almost exclusively the formation of benzoate. Neither benzil nor benzaldehyde were intermediates in the oxidation process. The rate law for the reaction was found to be which led to the conclusion that the rate-determining step in the catalyzed pathway was the reaction of oxygen with the ion pair:      

Polymerization of alkoxyallenes by transition-metal catalysts

The structure of polymers obtained by polymerization of methoxyallene and ethoxyallene with transition-metal catalysts depends on the catalyst employed. Rapid polymerization at 0°C through the unsubstituted double bond occurred with π-allylnickel halides, NiCl₂/AlEt₃ and CoCl₂/AlEt₃, yielding polymers with the structure Typical Ziegler–Natta catalysts (TiCl₄, VOCl₃ or FeCl₃ with AIEt₃) gave polymers mainly with the structure although some of the structural units were probably present as well. Polymers having conjugated double bonds were prepared with PdCl₂, [(π-allyl)PdCl]₂, and PdCl₂(C₆H₅CN)₂ as catalysts. Palladium iodide produced polymers with all three of the above structural units present. Polymerization occurred more slowly with these palladium catalysts. A preliminary examination of the effect of variation of solvent, ligand, co-catalyst, and temperature on the rate and structure of the polymers obtained with the palladium catalysts is reported.     

Structure of the tetramer of α-methylstyrene

The structure of the tetrameric dianion formed by α-methylstyrene in tetrahydrofuran by reaction with sodium has been examined. Mass spectral, NMR, infrared, and kinetic data all indicate that the structure is rather than the structure which had previously been assumed for this species.     

Gas phase reaction of heptafluoroisopropyl radicals with carbon tetrachloride

The reaction was investigated in the gas phase over the range 80–225°C using the photolysis of heptafluoroisopropyl iodide as the source of radicals. The rate constant, based on the value of 10^13.36 cm³ mol^?1 s^?1 for the recombination of i-C₃F₇ radicals, is given by where θ = 2.303 RT/cal mol^?1. Arrhenius parameters for chlorine abstraction from CCl₄ by CF₃, C₂F₅, n-C₃F₇, and some hydrogenated radicals are compared.     

Synthesis of phosphorus-containing poly-o-acylamideoximes from polyacrylonitrile

The synthesis of phosphorus-containing poly-O-acylamideoximes from polyacrylonitrile has been accomplished by the reaction sequence: Reaction is believed to occur at the NH₂ nitrogen as well as at the oxime group, but reaction is not believed to occur at both groups in the amide oxime unit. Inclusion of the phosphorus moiety occurs in the medium to high range.     

Synthesis of titanium polythioethers

The synthesis of polythioethers of the form was effected, where C_p denotes cyclopentadienyl. Four reaction systems were studied and evaluated. Two proved to be undesirable (the “reverse” interfacial and organic solution methods), while two proved acceptable (the “normal” interfacial and aqueous solution methods). A number of added bases were evaluated. Et₃N and NaOH were found to be acceptable. Yield increases with reaction time for aqueous solution syntheses, while yield remains constant with reaction time for synthesis via the normal interfacial method.     

Flash Photolysis of 2,4,6-Trinitrotoluene Solutions

Flash photolysis of 2,4,6-trinitrotoluene solutions (TNT) indicates a photochemically induced isomerization leading to the aci-quinoid isomer with an absorption maximum at 460 nm in nonpolar solvents, or the conjugate base of the aci-quinoid isomer with absorption maxima at 500, 540, and 630 nm in polar solvents. Both species, the quinoid isomer and the conjugate base, have transient existence and their identification was based on detailed spectroscopic and kinetic studies presented here. The magnitude of the negative charge on the transient conjugate base was determined with salt effect experiments and found to be equal to unity.