Formation and isomerization of cis,cis-Ir(H)2(--Ph)(CO)(PPh3)2 and cis,cis-Ir(H)(--Ph)2(CO)(PPh3)2 in oxidative addition of hydrogen and phenylacetylene to trans-Ir(CO)(--Ph)(PPh3)2

Oxidative addition of H–R (H--Ph and H₂) to trans-Ir(--Ph)(CO)(PPh₃)₂ (2) gives the initial products, cis, cis-Ir(H)(--Ph)₂(CO)(PPh₃)₂ (3a) and cis, cis-Ir(H)₂(--Ph)(CO)(PPh₃)₂ (3b), respectively. Both cis-bis(PPh₃) complexes, 3a and 3b undergo isomerization to give the trans-bis(PPh₃) complexes, trans, trans-Ir(H)(--Ph)₂(CO)(PPh₃)₂ (4a) and cis, trans-Ir(H)₂(--Ph)(CO)(PPh₃)₂ (4b). The isomerization, 3b→4b is first order with respect to 3b with k₁=6.37×10⁻⁴ s⁻¹ at 25°C under N₂ in CDCl₃. The reaction rate (k₁) seems independent of the concentration of H₂. A large negative entropy of activation (ΔS^≠=−24.9±5.7 cal deg⁻¹ mol⁻¹) and a relatively small enthalpy of activation (ΔH^≠=14.5±3.3 kcal mol⁻¹) were obtained in the temperature range 15∼35°C for the isomerization, 3b→4b under 1 atm of H₂.     

Kinetics and mechanism of the interaction of adenosine with cis‐diaqua(cis‐1,2‐diaminocyclohexane)platinum(II) perchlorate in aqueous medium

The kinetics of the interaction of adenosine with cis‐[Pt(cis‐dach)(OH₂)₂]²⁺ (dach = diaminocyclohexane) was studied spectrophotometrically as a function of [cis‐[Pt(cis‐dach)(OH₂)₂]²⁺], [adenosine], and temperature at a particular pH (4.0), where the substrate complex exists predominantly as the diaqua species and the ligand adenosine exists as a neutral molecule. The substitution reaction shows two consecutive steps: the first is the ligand‐assisted anation followed by a chelation step. The activation parameters for both the steps have been evaluated using Eyring equation. The low negative value of ΔH^≠₁ (43.1 ± 1.3 kJ mol^?1) and the large negative value of ΔS^≠₁ (?177 ± 4 J K^?1 mol^?1) along with ΔH^≠₂ (47.9 ± 1.8 kJ mol^?1) and ΔS^≠₂ (?181 ± 6 J K^?1 mol^?1) indicate an associative mode of activation for both the aqua ligand substitution processes. The kinetic study was substantiated by infrared and electrospray ionization mass spectroscopic analysis. © 2011 Wiley Peiodicals, Inc. Int J Chem Kinet 43: 219–229, 2011     

Mechanism of the Thermal Z⇌E Isomerization of a Stable Silene; Experiment and Theory

The E and Z geometric isomers of a stable silene (tBu₂MeSi)(tBuMe₂Si)Si=CH(1‐Ad) ( 1 ) were synthesized and characterized spectroscopically. The thermal Z to E isomerization of 1 was studied both experimentally and computationally using DFT methods. The measured activation parameters for the 1Z ? 1E isomerization are: E_a=24.4 kcal mol^?1, ΔH^≠=23.7 kcal mol^?1, ΔS^≠=?13.2 e.u. Based on comparison of the experimental and DFT calculated (at BP86‐D3BJ/def2‐TZVP(‐f)//BP86‐D3BJ/def2‐TZVP(‐f)) activation parameters, the Z?E isomerization of 1 proceeds through an unusual (unprecedented for alkenes) migration–rotation–migration mechanism (via a silylene intermediate), rather than through the classic rotation mechanism common for alkenes.     

Steric and electronic contributions to barriers of internal rotation in 1,8-dibenzoylnaphthalenes

Restricted rotation about the naphthalenylcarbonyl bonds in the title compounds resulted in mixtures of cis and trans rotamers, the equilibrium and the rotational barriers depending on the substituents. For 2,7-dimethyl-1,8-di-(p-toluoyl)-naphthalene (1) ΔH° = 3.66 ± 0.14 kJ mol^?1, ΔS° = 1.67 ± 0.63 J mol^?1 K^?1, ΔH^≠_ct = 55.5 ± 1.3 kJ mol^?1, ΔH^≠_ct = 51.9 ± 1.3 kJ mol^?1, ΔS^≠_ct = ?41.3±4.1 J mol^?1 K^?1 and ΔS^≠_ct = ?42.9±4.1 J mol^?1 K^?1. The rotation about the phenylcarbonyl bond requires ΔH^≠ = ?56.9±4.4 kJ mol^?1 and ΔS^≠ = ?20.5±15.3 J mol^?1 K^?1 for the cis rotamer, and ΔH^≠ = 43.5Δ0.4 kJ mol^?1 and ΔS^≠ =± ?22.4Δ1.3 J mol^?1 K^?1 for the trans rotamer. The role of electronic factors is likely to be virtually the same for both these rotamers but steric interaction between the two phenyl rings occurs in the cis rotamer only. Hence, the difference of the activation enthalpies obtained for the cis and trans rotamers, ΔΔH^?1 = 13.4 kJ mol^?1, provides a basis for the estimation of the role of steric factors in this rotation. For the tetracarboxylic acid 2 and its tetramethyl ester 3 the equilibrium is even more shifted towards the trans form because of enhanced steric and electrostatic interactions between the substituents in the cis form. The barriers for the rotation around the phenylcarbonyl bond and the cis-trans isomerization are lowered; an explanation for this result is presented.     

Stereochemical nonrigidity of the square complex (PPh3)2Pt(HgGePh3)(GePh3)

³¹P, ¹⁹⁵Pt and ¹⁹⁹Hg NMR spectra of complex (PPh₃)₂Pt(HgGePh₃)(GePh₃) (I) have been studied. The spectra at temperatures below ?40°C prove that (I) is a cis-isomer with the square-planar coordination of the Pt atom. The reversibility of temperature dependences of spectra, insensitivity of line shape to the solvent, concentration and presence of free phosphine establish the fluxional behaviour of (I). The activation parameters of the intramolecular rearrangement which is realized, most probably, through a digonal twist, are: Δ^≠₂₉₈ = 51.5 ± 2.9 kJ/mol, ΔH^≠ = 59.3 ± 2.9 kJ/mol, ΔS^≠ = 26.2 ± 9.7 J/mol. K.     

Low temperature 13C NMR study of 1-(3-pentyloxyphenylcarbamoyloxy)-2-dialkyl- aminocyclohexanes

Cyclohexane and piperidine ring reversal in 1-(3-pentyloxyphenylcarbamoyloxy)-2-dialkylaminocyclohexanes was investigated by ¹³C NMR. An unusually low conformational energy ΔG = 0.59 kJ mol^?1 and activation parameters ΔG^≠₂₁₈ = 43.8 ± 0.4 kJ mol^?1, ΔH^≠ = 48.9 ± 2.5 kJ mol^?1 and ΔS^≠ = 23 ± 9 J mol^?1 K^?1 were found for the diequatorial to diaxial transition of the cyclohexane ring in the trans-pyrrolidinyl derivative. In the trans-piperidinyl derivative, ΔG₂₂₂ = 44.7 ± 0.5 KJ mol^?1, ΔH^≠ = 55.7 ± 6.3 kJ mol^?1 and ΔS^≠ = 51 ± 21 J mol^?1 K^?1 was found for the piperidine ring reversal from the non-equivalence of the α-carbons.     

Dynamic proton magnetic resonance studies on complex spin systems. Non-mutual three-spin exchange in N-(trideuteriomethyl)-2-cyanoaziridine

At room temperature and below, the proton NMR spectrum of N-(trideuteriomethyl)-2-cyanoaziridine consists of two superimposed ABC patterns assignable to two N-invertomers; a single time-averaged ABC pattern is observed at 158.9°C. The static parameters extracted from the spectra in the temperature range from –40.3 to 23.2°C and from the high-temperature spectrum permit the calculation of the thermodynamic quantities ΔH⁰ = ?475±20 cal mol^?1 (?1.987 ± 0.084 kJ mol^?1) and ΔS⁰ = 0.43±0.08 cal mol^?1 K^?1 (1.80±0.33 J mol^?1 K^?1) for the cis ? trans equilibrium. Bandshape analysis of the spectra broadened by non-mutual three-spin exchange in the temperature range from 39.4–137.8°C yields the activation parameters ΔH_tc^≠ = 17.52±0.18 kcal mol^?1 (73.30±0.75 kJ mol^?1), ΔS_tc^≠ = ?2.08±0.50 cal mol^?1 K^?1 (?8.70±2.09 J mol^?1 K^?1) and ΔG_tc^≠ (300 K) = 18.14±0.03 kcal mol^?1 (75.90±0.13 kJ mol^?1) for the trans → cis isomerization. An attempt is made to rationalize the observed entropy data in terms of the principles of statistical thermodynamics.     

The kinetics and thermodynamics of a novel efficient mixed water–1,4-dioxan solvent for the effective complexation of a neutral ruthenium complex with carbon monoxide at atmospheric pressure

Kinetic and thermodynamic investigations were performed for a mixed aqueous-organic, 1:1 (v/v) water–1,4-dioxane medium, which was found to be an efficient solvent for the interaction of a neutral dichlorotris(triphenylphosphine) ruthenium(II), RuCl₂(PPh₃)₃ complex with carbon monoxide at atmospheric pressure. During the interaction, RuCl₂(PPh₃)₃ dissociates to a neutral complex dichlorobis(triphenylphosphine) ruthenium(II), RuCl₂(PPh₃)₂, by losing a coordinated PPh₃ ligand and RuCl₂(PPh₃)₂ coordinates with CO to form an in situ carbonyl complex RuCl₂(CO)(PPh₃)₂. The in situ formed carbonyl complex RuCl₂(CO)(PPh₃)₂ was thoroughly characterized by equilibrium, spectrophotometric, IR, and electrochemical techniques. Under equilibrium conditions, the rate and dissociation constants for the dissociation of PPh₃ from RuCl₂(PPh₃)₃ were found to be favorable for the formation of the carbonyl complex RuCl₂(CO)(PPh₃)₂. The rates of complexation for the formation of RuCl₂(CO)(PPh₃)₂ were found to follow an overall second-order kinetics being first order in terms of the concentrations of both carbon monoxide and RuCl₂(PPh₃)₂. The determined activation parameters corresponding to the rate constant (ΔH^# = 35.9 ± 2.5 kJ mol⁻¹ and ΔS^# = −122 ± 6 J K⁻¹ mol⁻¹) and thermodynamic parameters corresponding to the formation constant (ΔH° = −33.5 ± 4.5 kJ mol⁻¹, ΔS° = −25 ± 8 J K⁻¹ mol⁻¹, and ΔG° = −25.7 ± 2.0 kJ mol⁻¹) were found to be highly favorable for the formation of the complex RuCl2(CO)(PPh3)2. © 2008 Wiley Periodicals, Inc. Int J Chem Kinet 40: 359–369, 2008     

Mechanistic Aspects of Ligand Substitution on the Hydroxopentaaquarhodium(III) Ion in Aqueous Solution by Sulfur‐Containing Bioactive Ligands

The kinetics of the interactions between three sulfur‐containing ligands, thioglycolic acid, 2‐thiouracil, glutathione, and the title complex, have been studied spectrophotometrically in aqueous medium as a function of the concentrations of the ligands, temperature, and pH at constant ionic strength. The reactions follow a two‐step process in which the first step is ligand‐dependent and the second step is ligand‐independent chelation. Rate constants (k₁ ～10^?3 s^?1 and k₂ ～10^?5 s^?1) and activation parameters (for thioglycolic acid: ΔH₁^≠ = 22.4 ± 3.0 kJ mol^?1, ΔS₁^≠ = ?220 ± 11 J K^?1 mol^?1, ΔH₂^≠ = 38.5 ± 1.3 kJ mol^?1, ΔS₂^≠ = ?204 ± 4 J K^?1 mol^?1; for 2‐thiouracil: ΔH₁^≠ = 42.2 ± 2.0 kJ mol^?1, ΔS₁^≠ = ?169 ± 6 J K^?1 mol^?1, ΔH₂^≠ = 66.1 ± 0.5 kJ mol^?1, ΔS₂^≠ = ?124 ± 2 J K^?1 mol^?1; for glutathione: ΔH₁^≠ = 47.2 ± 1.7 kJ mol^?1, ΔS₁^≠ = ?155 ± 5 J K^?1mol^?1, ΔH₂^≠ = 73.5 ± 1.1 kJ mol^?1, ΔS₂^≠ = ?105 ± 3 J K^?1 mol^?1) were calculated. Based on the kinetic and activation parameters, an associative interchange mechanism is proposed for the interaction processes. The products of the reactions have been characterized from IR and ESI mass spectroscopic analysis. A rate law involving the outer sphere association complex formation has been established as      

Kinetic study of the ligand substitution on the trimethylplatinum(iv) complexes with unidentate ligands

Ligand substitution kinetics for the reaction [Pt^IVMe₃(X)(NN)]+NaY=[Pt^IVMe₃(Y)(NN)]+NaX, where NN=bipy or phen, X=MeO⁻, CH₃COO⁻, or HCOO⁻, and Y=SCN⁻ or N₃⁻, has been studied in methanol at various temperatures. The kinetic parameters for the reaction are as follows. The reaction of [PtMe₃(OMe)(phen)] with NaSCN: k₁=36.1±10.0 s⁻¹; ΔH₁^≠=65.9±14.2 kJ mol⁻¹; ΔS₁^≠=6±47 J mol⁻¹ K⁻¹; k₋₂=0.0355±0.0034 s⁻¹; ΔH₋₂^≠=63.8±1.1 kJ mol⁻¹; ΔS₋₂^≠=−58.8±3.6 J mol⁻¹ K⁻¹; and k₋₁/k₂=148±19. The reaction of [PtMe₃(OAc)(bipy)] with NaN₃: k₁=26.2±0.1 s⁻¹; ΔH₁^≠=60.5±6.6 kJ mol⁻¹; ΔS₁^≠=−14±22 J mol⁻¹K⁻¹; k₋₂=0.134±0.081 s⁻¹; ΔH₋₂^≠=74.1±24.3 kJ mol⁻¹; ΔS₋₂^≠=−10±82 J mol⁻¹K⁻¹; and k₋₁/k₂=0.479±0.012. The reaction of [PtMe₃(OAc)(bipy)] with NaSCN: k₁=26.4±0.3 s⁻¹; ΔH₁^≠=59.6±6.7 kJ mol⁻¹; ΔS₁^≠=−17±23 J mol⁻¹K⁻¹; k₋₂=0.174±0.200 s⁻¹; ΔH₋₂^≠=62.7±10.3 kJ mol⁻¹; ΔS₋₂^≠=−48±35 J mol⁻¹K⁻¹; and k₋₁/k₂=1.01±0.08. The reaction of [PtMe₃(OOCH)(bipy)] with NaN₃: k₁=36.8±0.3 s⁻¹; ΔH₁^≠=66.4±4.7 kJ mol⁻¹; ΔS₁^≠=7±16 J mol⁻¹K⁻¹; k₋₂=0.164±0.076 s⁻¹; ΔH₋₂^≠=47.0±18.1 kJ mol⁻¹; ΔS₋₂^≠=−101±61 J mol⁻¹ K⁻¹; and k₋₁/k₂=5.90±0.18. The reaction of [PtMe₃(OOCH)(bipy)] with NaSCN: k₁ =33.5±0.2 s⁻¹; ΔH₁^≠=58.0±0.4 kJ mol⁻¹; ΔS₁^≠=−20.5±1.6 J mol⁻¹ K⁻¹; k₋₂=0.222±0.083 s⁻¹; ΔH₋₂^≠=54.9±6.3 kJ mol⁻¹; ΔS₋₂^≠=−73.0±21.3 J mol⁻¹ K⁻¹; and k₋₁/k₂=12.0±0.3. Conditional pseudo-first-order rate constant k₀ increased linearly with the concentration of NaY, while it decreased drastically with the concentration of NaX. Some plausible mechanisms were examined, and the following mechanism was proposed. [Note to reader: Please see article pdf to view this scheme.] © 1998 John Wiley & Sons, Inc. Int J Chem Kinet 30: 523–532, 1998     

The platinum—carbon bond strength in Pt(PPh3)2(Cl)(CPhCHPh)

The enthalpies of the reactions 1 and 2 have been determined as ΔH = Pt(PPh₃)₂(CPhCPh)_cryst. + HCl_g → Pt(PPh₃)₂(Cl)(CPhCHPh)_cryst. (1) Pt(PPh₃)₂(CPhCPh)_cryst. + 2HCl_g → cis-Pt(PPh₃)₂Cl_2cryst. + trans-CHPhCHPh_g (2) ?90.2 ± 6 and ΔH = ?139.0 ± 16 kJ mol^?1, respectively; dissociation energies of bonds involving platinum are expressed by the relationship: 41 kJ mol^?1 + D(Pt-tolane) = 2D(PtCPhCHPh) = {D₁(PtCl) + D₂(PtCl)} ?350 kJ mol^?1     

Kinetics of substitution of aqua ligands from cis‐diaqua (ethylenediamine)platinum(II) perchlorate by L‐asparagine in aqueous medium

The kinetics of the interaction of L ‐asparagine with [Pt(ethylenediamine)(H₂O)₂]²⁺ have been studied spectrophotometrically as a function of [Pt(ethylenediamine)(H₂O)₂²⁺], [L ‐asparagine], and temperature at pH 4.0, where the substrate complex exists predominantly as the diaqua species and L ‐asparagine as the zwitterion. The substitution reaction shows two consecutive steps: the first step is the ligand‐assisted anation and the second one is the chelation step. Activation parameters for both the steps have been calculated using Eyring equation. The low ΔH₁^≠ (43.59 ± 0.96 kJ mol^?1) and large negative values of ΔS₁^≠ (?116.98 ± 2.9 J K^?1 mol^?1) as well as ΔH₂^≠ (33.78 ± 0.51 kJ mol^?1) and ΔS₂^≠ (?221.43 ± 1.57 J K^?1 mol^?1) indicate an associative mode of activation for both the aqua ligand substitution processes. © 2003 Wiley Periodicals, Inc. Int J Chem Kinet 35: 252–259, 2003     

Spectral Properties of Ruthenium(II) Mixed-Ligands Complexes with 2,2'-Bipyridyl and Phosphines

Spectral-kinetic luminescence characteristics of the complexes cis-[Ru(bpy)(dppe)X2], cis- [Ru(bpy)2(PPh₃)X](BF₄) and cis-[Ru(bpy)₂X₂] [bpy = 2,2'-bipyridyl, dppe = 1,2-bis(diphenylphosphino)ethane, PPh₃ is triphenylphosphine, X = NO₂ ^- and CN^-] in the ethanol-methanol 4:1 mixtures and adsorbed on the oxide SiO₂ or porous polyacrylonitrile polymer surface were studied. Luminescence and luminescence exitation spectra were registered at 77 and 293 K in 230-750 nm range and the luminescence decay time was measured. Introduction of phosphine ligands to the ruthenium(II) bipyridyl complexes inner sphere leads to rise in singlet and triplet state energy at the charge transfer from Ru(II) to 2,2'-bipyridyl in the series [Ru(bpy)₂X₂] < Ru(bpy)₂(PPh₃)X](BF₄) < [Ru(bpy)(dppe)X₂]. The complex adsorption on SiO₂ or polyacrylonitrile surface affects noticeably the luminescence spectro-kinetic characteristics.     

Activation of Strong Boron–Fluorine and Silicon–Fluorine σ‐Bonds: Theoretical Understanding and Prediction

The oxidative addition of BF₃ to a platinum(0) bis(phosphine) complex [Pt(PMe₃)₂] ( 1 ) was investigated by density functional calculations. Both the cis and trans pathways for the oxidative addition of BF₃ to 1 are endergonic (ΔG°=26.8 and 35.7 kcal mol^?1, respectively) and require large Gibbs activation energies (ΔG°^≠=56.3 and 38.9 kcal mol^?1, respectively). A second borane plays crucial roles in accelerating the activation; the trans oxidative addition of BF₃ to 1 in the presence of a second BF₃ molecule occurs with ΔG°^≠ and ΔG° values of 10.1 and ?4.7 kcal mol^?1, respectively. ΔG°^≠ becomes very small and ΔG° becomes negative. A charge transfer (CT), F→BF₃, occurs from the dissociating fluoride to the second non‐coordinated BF₃. This CT interaction stabilizes both the transition state and the product. The B?F σ‐bond cleavage of BF₂Ar^F (Ar^F=3,5‐bis(trifluoromethyl)phenyl) and the B?Cl σ‐bond cleavage of BCl₃ by 1 are accelerated by the participation of the second borane. The calculations predict that trans oxidative addition of SiF₄ to 1 easily occurs in the presence of a second SiF₄ molecule via the formation of a hypervalent Si species.     

Synthesis and Diels-Alder Reactivity of 2,3,5,6-Tetramethylidenenorbornane

Pd-catalyzed double carbomethoxylation of the Diels-Alder adduct of cyclo-pentadiene and maleic anhydride yielded the methyl norbornane-2,3-endo-5, 6-exo-tetracarboxylate ( 4 ) which was transformed in three steps into 2,3,5,6-tetramethyl-idenenorbornane ( 1 ). The cycloaddition of tetracyanoethylene (TCNE) to 1 giving the corresponding monoadduct 7 was 364 times faster (toluene, 25°) than the addition of TCNE to 7 yielding the bis-adduct 9 . Similar reactivity trends were observed for the additions of TCNE to the less reactive 2,3,5,6-tetramethylidene-7-oxanorbornane ( 2 ). The following second order rate constants (toluene, 25°) and activation parameters were obtained for: 1 + TCNE → 7 : k₁ = (255 + 5) 10^?4 mol^?1 · s^?1, ΔH≠ = (12.2 ± 0.5) kcal/mol, ΔS≠ = (?24.8 ± 1.6) eu.; 7 + TCNE → 9 , k₂ = (0.7 ± 0.02) 10^?4 mol^?1 · s^?1, ΔH≠ = (14.1 ± 1.0) kcal/mol, ΔS≠ = ( ?30 ± 3.5) eu.; 2 + TCNE → 8 : k₁ = (1.5 ± 0.03) 10^?4 mol^?1 · s^?1, ΔH≠ = (14.8 ± 0.7) kcal/mol, ΔS≠ = (?26.4 ± 2.3) eu.; 8 + TCNE → 10 ; k₂ = (0.004 ± 0.0002) 10^?4 mol^?1 · s^?1, ΔH≠ = (17 ± 1.5) kcal/mol, ΔS≠ = (?30 ± 4) eu. The possible origins of the relatively large rate ratios k₁/k₂ are discussed briefly.     

Preparation and Diels-Alder Reactivity of 2,3,5,6,7,8-Hexamethylidenebicyclo [2.2.2]octane (‘[2.2.2]Hericene’). Force-field calculations of exocyclic dienes as a moiety of bicyclic skeletons

The [2.2.2]hericene ( 6 ), a bicyclo[2.2.2]octane bearing three exocyclic s-cis-butadiene units has been prepared in eight steps from coumalic acid and maleic anhydride. The hexaene 6 adds successively three mol-equiv. of strong dienophiles such as ethylenetetracarbonitrile (TCE) and dimethyl acetylenedicarboxylate (DMAD) giving the corresponding monoadducts 17 and 20 (k₁), bis-adducts 18 and 21 (k₂) and tris-adducts 19 and 22 (k₃), respectively. The rate constant ratio k₁/k₂ is small as in the case of the cycloadditions of 2,3,5,6-tetramethylidene-bicyclo [2.2.2]octane ( 3 ) giving the corresponding monoadducts 23 and 27 (k₁) and bis-adducts 25 and 29 (k₂) with TCE and DMAD, respectively. Constrastingly, the rate constant ratio k₂/k₃ is relatively large as the rate constant ratio k₁/k₂ of the Diels-Alder additions for 5,6,7,8-tetramethylidenebicyclo [2.2.2]oct-2-ene ( 4 ) giving the corresponding monoadducts 24 and 28 (k₁) and bis-adducts 26 and 30 (k₂). The following second-order rate constants (toluene, 25°) and activation parameters were obtained for the TCE additions: 3 +TCE→ 23 : k₁ = 0.591±0.012 mol^?1·l·s^?1, ΔH^≠=10.6±0.4 kcal/mol, and ΔS^≠ = ?24.0±1.4 cal/mol·K (e.u.); 23 +TCE→ 25 : k₂=0.034±0.0010 mol^?1·l·s^?1, ΔH^≠ = 10.6±0.6 kcal/mol, and ΔS^≠ = ?29.7±2.0 e.u.; 4 +TCE→ 26 : k₁ = 0.172±0.035 mol^?1·l·s^?1, ΔH^≠ 11.3±0.8 kcal/mol, and ΔS^≠ = ?24.0±2.8 e.u.; 24 +TCE→ 26 : k₂ = (6.1±0.2)·10^?4 mol^?1·l·s^?1, ΔH^≠ = 13.0±0.3 kcal/mol, and ΔS^≠ = ?29.5±0.8 e.u.; 6 +TCE→ 17 : k₁ = 0.136±0.002 mol^?1·l·s^?1, ΔH^≠ = 11.3±0.2 kcal/mol, and ΔS^≠ = ?24.5±0.8 e.u.; 17 +TCE→ 18 : k₂ = 0.0156±0.0003 mol^?1·l·s^?1, ΔH^≠ = 10.9±0.5 kcal/mol, and ΔS^≠ = ?30.1 ± 1.5 e.u.; 18 +TCE→ 19 : k₃=(5±0.2) · 10^?5 mol^?1 mol^?1 ·l·s^?1, ΔH^≠ = 15±3 kcal/mol, and ΔS^≠ = ?28 ± 8 e.u. The following rate constants were evaluated for the DMAD additions (CD₂Cl₂, 30°): 6 +DMAD→ 20 : k₁ = (10±1)·10^?4 mol^?1 · l·s^?1; 20 +DMAD→ 21 : k₂ = (6.5±0.1) · 10^?4 mol^?1 ·l·^?1; 21 +DMAD→ 22 : k₃ = (1.0±0.1) · 10^?4 mol^?1 ·l·s^?1. The reactions giving the barrelene derivatives 19, 22, 26 and 30 are slower than those leading to adducts that are not barrelenes. The former are estimated less exothermic than the latter. It is proposed that the Diels-Alder reactivity of exocyclic s-cis-butadienes grafted onto bicycle [2.2.1]heptanes and bicyclo [2.2.2]octanes that are modified by remote substitution of the bicyclic skeletons can be affected by changes inthe exothermicity of the cycloadditions, in agreement with the Dimroth and Bell-Evans-Polanyi principle. Force-field calculations (MMPI 1) of 3, 4, 6 and related exocyclic s-cis-butadienes as a moiety of bicyclo [2.2.2]octane suggested single minimum energy hypersurfaces for these systems (eclipsed conformations, planar dienes). Their flexibility decreases with the degree of unsaturation of the bicyclic skeleton. The effect of an endocyclic double bond is larger than that of an exocyclic diene moiety.     

Alkene isomerization catalysed with platinum hydride complexes

The mechanism of but-1-ene, pent-1-ene and 3-methylbut-1-ene isomerization catalysed with trans-[PtH(SnX₃)L₂] (I, L = PPh₃, PMePh₂, PEt₃, PPr₃; X = Cl, Br) have been studied. Stoichiometric reactions of I with the alkenes proceed even at ?90°C giving cis-[Pt(alkyI-1) (SnX₃) L₂] (II). The equilibrium amounts of II are dependent on the nature of the phosphines, halogens and alkenes. The isomerization rates, determined at +20°C, change in parallel with the relative stabilities of II as a function of phosphine (PMePh₂ > PPh₃ > PAlk₃) and halogen (Br > Cl), and decrease with methyl substitution at γ- and δ- carbons of the alkenes. 2-Substituted alk-1-enes undergo no isomerization in the reactions under investigation. When L is PPh₃ or PMePh₂, the main platinum-containing species in the course of the isomerization are trans-[Pt(alkyl-1) (SnX₃)L₂], appearing as a result of cis-trans isomerization of II. The conversion of I, L = PAlk₃ into related trans-alkyl complexes, and oxidation of I, proceed more slowly than the isomerization of alkenes. The ratio of cis- to trans-alk-2-enes is dependent on the size of L and is a maximum for L = PPh₃.     

Evidence for a Rapid Degenerate Hetero‐Cope‐Type Rearrangement in [Cp*W(S)2S‐CH2‐CHCH2]

Treatment of the salt [PPh₄]⁺[Cp*W(S)₃]^? ( 6 ) with allyl bromide gave the neutral complex [Cp*W(S)₂S‐CH₂‐CH?CH₂] ( 7 ). The product 7 was characterized by an X‐ray crystal structure analysis. Complex 7 features dynamic NMR spectra that indicate a rapid allyl automerization process. From the analysis of the temperature‐dependent NMR spectra a Gibbs activation energy of ΔG^≠ (278 K)≈13.7±0.1 kcal mol^?1 was obtained [ΔH^≠≈10.4±0.1 kcal mol^?1; ΔS^≠≈?11.4 cal mol^?1 K^?1]. The DFT calculation identified an energetically unfavorable four‐membered transition state of the “forbidden” reaction and a favorable six‐membered transition state of the “Cope‐type” allyl rearrangement process at this transition‐metal complex core.     

Sels de Pyrylium. XVIII. Etude par RMN du Carbone-13 de Sels d'Aminopyrylium et des Barrières de Rotation dans quelques Cations N,N-Diméthylaminopyrylium

The C-2—N bond of 2-N,N-dimethylaminopyrylium cations has a partial π character due to the conjugation of the nitrogen lone-pair with the ring. The values of ΔG^≠, ΔH^≠, ΔS^≠ parameters related to the corresponding hindered rotation have been determined by ¹³C NMR total bandshape analysis. This conjugation decreases the electrophilic character of carbon C-4 so that the displacement of the alkoxy group is no longer possible. Such a hindered rotation also exists in 4-N,N-dimethylaminopyrylium cations and the corresponding ΔG^≠ parameters have been evaluated. Comparison of these two cationic species shows that hindered rotation around the C—N bond is larger in position 4 than in position 2. Furthermore, the barrier to internal rotation around the C-2? N bond decreases with increasing electron donating power of the substituent at position 4. ΔG^≠ values decreases from 19.1 kcal mol^?1 (79.9 kJ mol^?1) to 12.6 kcal mol^?1 (52.7 kJ mol^?1) according to the following sequence for the R-4 substituents: -C₆H₅, -CH₃, -OCH₃, -N(CH₃)₂.     

Substitution and Isomerization of Nitrite Ion at a Cobalt(III) Centre Having a Coordinated Pentadentate Ligand with Two Nitrogen and Three Sulfur Donor Atoms

The influence of placing thioether linkages trans to a site of nitrito substitution and spontaneous nitrito-tonitro isomerization is reported for the [CoQS(H₂O)]³⁺ cation where QS is 1,11-diamino-3,6,9-trithiaundecane. Preparation and characterization is described for the aqua and nitrito complexes. Rate data for the substitution process is presented at 17.7, 25.0 and 35.0°C. It is consistent with the mechanism first proposed by Basolo and Pearson in which N₂O₃ is the nitrosation agent. [CoQS(H₂O)]³⁺ is three hundred times more reactive than [Co(NH₃)₅H₂O]³⁺ under identical conditions. Isomerization is dramatically slower than the conversion of [CoQS(H₂O)³⁺ to [CoQS(ONO)]²⁺. The isomerization process was studied at 5 wavelengths, 3 temperatures and various conditions of acid and nitrite ion at an ionic strength of 0.11–0.60 M. Studies at 25°C give k_isom = 1.21 ± 0.12 × 10^?4 sec ^?1. Similar determinations at 17.7 and 35.0°C give k_isom = 3.84 ± 0.65 × 10^?5 sec^?1 and 3.59 ± 0.13 × 10^?4 sec^?1 respectively. The thermodynamic activation parameters ΔH^≠, ΔG^≠, and ΔS^≠ obtained from an Eyring plot gives ΔH^≠ = 111.3 kJ/mol, ΔS^≠ = + 53 J/molK and ΔG^≠ = 95.4 kJ/mol. These results are discussed in the context of present knowledge and experience with other cobalt(III) ligand systems.