Novel polyamides with acyclic and cyclic bipyridinediyl diamino structures in the polymer backbone: Synthesis and complexation with transition metals

The synthesis of two novel polyamide ligands 3 and 4 , containing 2,17-diaza[3.3](6,6′)-2,2′-bipyridinophane or 6,6′-bis(2-picolylaminomethyl)-2,2′-bipyridine units as part of the polymer backbone, respectively, and of the appropriate diamide model compounds 1c and 2c is described. ¹H-NMR and IR spectral data support the ligand structures; furthermore, ¹H-VTNMR analysis on macrocyclic diamide 1c indicates a restricted rotation of the amide bonds at ambient temperature and suggests for this molecule a fixed syn conformation in solution, with a “face to face” arrangement of the dipyridinyl moieties. Model compound 2c and polyamide 4 form stable 1:1 complexes with transition metals Co(II), Ni(II), and Cu(II). Conversely, macrocyclic model 1c and polyamide 3 exhibit the unique property to specifically complex Cu(II), even in the presence of sizeable amounts of Co(II) and Ni(II). The IR spectral changes related to the ligands upon complexation are briefly discussed.     

Methyl 2‐acetamido‐2‐deoxy‐β‐d‐glucopyranoside dihydrate and methyl 2‐formamido‐2‐deoxy‐β‐d‐glucopyranoside

Methyl 2‐acetamido‐2‐deoxy‐β‐d ‐glucopyranoside (β‐GlcNAcOCH₃), (I), crystallizes from water as a dihydrate, C₉H₁₇NO₆·H₂O, containing two independent molecules [denoted (IA) and (IB)] in the asymmetric unit, whereas the crystal structure of methyl 2‐formamido‐2‐deoxy‐β‐d ‐glucopyranoside (β‐GlcNFmOCH₃), (II), C₈H₁₅NO₆, also obtained from water, is devoid of solvent water molecules. The two molecules of (I) assume distorted ⁴C₁ chair conformations. Values of ϕ for (IA) and (IB) indicate ring distortions towards B_C2,C5 and ^C3,O5B, respectively. By comparison, (II) shows considerably more ring distortion than molecules (IA) and (IB), despite the less bulky N‐acyl side chain. Distortion towards B_C2,C5 was observed for (II), similar to the findings for (IA). The amide bond conformation in each of (IA), (IB) and (II) is trans, and the conformation about the C—N bond is anti (C—H is approximately anti to N—H), although the conformation about the latter bond within this group varies by ∼16°. The conformation of the exocyclic hydroxymethyl group was found to be gt in each of (IA), (IB) and (II). Comparison of the X‐ray structures of (I) and (II) with those of other GlcNAc mono‐ and disaccharides shows that GlcNAc aldohexopyranosyl rings can be distorted over a wide range of geometries in the solid state.     

N‐Benzylnicotinamide and N‐benzyl‐1,4‐dihydronicotinamide: useful models for NAD+ and NADH

3‐Aminocarbonyl‐1‐benzylpyridinium bromide (N‐benzylnicotinamide, BNA), C₁₃H₁₃N₂O⁺·Br⁻, (I), and 1‐benzyl‐1,4‐dihydropyridine‐3‐carboxamide (N‐benzyl‐1,4‐dihydronicotinamide, rBNA), C₁₃H₁₄N₂O, (II), are valuable model compounds used to study the enzymatic cofactors NAD(P)⁺ and NAD(P)H. BNA was crystallized successfully and its structure determined for the first time, while a low‐temperature high‐resolution structure of rBNA was obtained. Together, these structures provide the most detailed view of the reactive portions of NAD(P)⁺ and NAD(P)H. The amide group in BNA is rotated 8.4 (4)° out of the plane of the pyridine ring, while the two rings display a dihedral angle of 70.48 (17)°. In the rBNA structure, the dihydropyridine ring is essentially planar, indicating significant delocalization of the formal double bonds, and the amide group is coplanar with the ring [dihedral angle = 4.35 (9)°]. This rBNA conformation may lower the transition‐state energy of an ene reaction between a substrate double bond and the dihydropyridine ring. The transition state would involve one atom of the double bond binding to the carbon ortho to both the ring N atom and the amide substituent of the dihydropyridine ring, while the other end of the double bond accepts an H atom from the methylene group para to the N atom.     

A fourier transform infrared spectroscopic study of the molecular interaction in synthetic bilayer membrane

Fourier transform infrared spectroscopy is used to study the molecular interaction between gramicidin D and bilayer membranes, dioctadecadimethylammonium bromide (2C₁₈N⁺2C₁Br⁻), and 1,2-di-palmytoyl- -α-phosphatidylcholine (DPPC). Frequencies and bandwidths of the symmetric CH₂ stretching band measured as a function of temperature are used to study variation of packing of alkyl chains. The bilayer membrane prepared from 2C₁₈N⁺2C₁Br⁻ is found to have a gel to liquid crystal phase transition at 42°C. The presence of gramicidin in the membrane causes an increase in the mobility of the alkyl chain and also a decrease in the abruptness of the transition.The frequencies of amide I and II bands of gramicidin reflecting secondary structures of polypeptides are used to identify its conformation in membranes and to study the interaction between gramicidin and the matrices. Gramicidin is found to have hydrophobic interaction with 2C₁₈N⁺2C₁Br⁻, whereas it has both hydrophobic and hydrophilic interactions with DPPC.     

Evaluation of the origin of conformational and tautomeric preferences in N‐formylformamide – A quantum chemical study

Quantum chemical study of N‐formylformamide (NFF) was carried out at various theoretical levels and the determinate equilibrium conformations were recomputed at the high level ab initio methods such as G2MP2, G2, G3, and complete basis set (CBS)‐QB3. The computational results reveal that the amide resonance and intramolecular hydrogen bonding are two superior factors in determining the most stable conformation of diamide (DA) and amide–imidic (AI) acid tautomers, respectively. The evaluation of hydrogen bond energies predicts that the hydrogen bond (HB( strength of NFF is weaker than the malonaldehyde (MA). But the results of atoms in molecules (AIM(, natural bond orbital (NBO), and geometrical parameters are given a different order, E_HB(NFF) > E_HB(MA). Although the bond average energies of tautomerization process emphasized on more stability of AI tautomer, but our theoretical calculations reveal that the DA conformers are more stable than the AI ones. The population analyses of equilibrium conformations by NBO method also predict that the origin of tautomeric preference is mainly because of the electron delocalization of amide functional group, especially LP(N)→ π*_C?O charge transfer. © 2010 Wiley Periodicals, Inc. Int J Quantum Chem, 2012     

Effect of the Identity of Xaa on the Fragmentation Modes of Doubly-Protonated Ala-Ala-Xaa-Ala-Ala-Ala-Arg

The product ion mass spectra resulting from collisional activation of doubly-protonated tryptic-type peptides Ala-Ala-Xaa-Ala-Ala-Ala-Arg have been determined for Xaa = Ala(A), Ser(S), Val(V), Thr(T), Ile(I), Phe(F), Tyr(Y), Sar, Met(M), Trp(W), Pro(P), and Gln(Q). The major fragmentation reaction involves cleavage of the second amide bond (counting from the N-terminus) except for Xaa = Ser and Thr where elimination of H₂O from the [M + 2H]⁺² ion forms the base peak. In general, the extent of cleavage of the second amide bond shows little dependence on the identity of Xaa and little dependence on whether the bond cleavage involves symmetrical bond cleavage to form a y₅/b₂ ion pair or asymmetrically to form y₅⁺² and a neutral b₂ species. Notable exceptions to this generalization occur for Xaa equal to Pro or Sar. For Xaa = Pro only cleavage of the second amide bond is observed, consistent with a pronounced proline effect, i.e., cleavage N-terminal to Pro. When Xaa = Sar considerably enhanced cleavage of the second amide bond also is observed, suggesting that at least part of the proline effect relates to the tertiary nature of the amide nitrogen. In the competition between symmetric and asymmetric bond cleavage an attempt to establish a linear free energy correlation in relating ln(y₅⁺²/y₅) to PA(H-Xaa-OH) did not lead to a reasonable correlation although the trend of increasing y₅⁺²/y₅ ratio with increasing proton affinity of H-Xaa-OH was clear. Proline showed a unique behavior in giving a much higher y₅⁺²/y₅ ratio than any of the other residues studied.     

Aminolysis reaction of calix [ 4 ] arene esters and crystal structures and conformational behaviors of calix[4]arene amides

We first make use of aminolysis of calix[4]arene esters to synthesize calix[4]arene amides. When the two ethyl esters of the calix[4]arene esters are aminolysized, the 1, 3-amide derivative is formed selectively. The crystal structures of the calix-[4]arene with two butyl amide (3b) and four butyl amide moieties (4b) were determined. The intermolecular hydrogen bonds make 4b form two-dimensional net work insolid state. The 1H NMR spectra prove that 3b is of a pinched cone conformation, while 4b and tetraheptylamide-calix[4]arene (6b) take fast interconversion between two C2v isomers in solution and appear an apparent cone conformation at room temperature. As decreasing temperature, the interconversion rate decreases gradually and, finally, the interconversion process is frozen at Tc = -10℃, which makes both conformations of 4b and 6b the pinched cone structures. The hydrogen bond improves the interconversion barrier, and the large different values of the potential barrier between 6b and 4b (or 6b) may     

Conformational studies of poly(cis-5-ethyl-D-proline)

Two possible conformations for poly(cis-5-ethyl-D -proline) have been identified and characterized by using combinations of ¹H- and ¹³C-NMR, CD, and ORD spectroscopic techniques. Both forms have helical conformations similar to those of poly(L -proline) characterized by different amide bonds (cis and trans). However, the carbonyl group of the amide in poly(cis-5-ethyl-D -proline) form II (trans) seems to be closer to perpendicular orientation with respect to the helical axis than in poly(L -proline) form II. The pyrrolidine ring conformation of form I (cis) is probably β⁺γ^?-puckered, whereas for form II it is probably β⁺-puckered in nature. The side-chain ethyl groups prefer to adopt anti conformations to the C₅? H bond, or prefer to have χ = 180°, regardless which of the two forms poly(cis-5-ethyl-D -proline) may like to assume. The experimental results agree well with our previous theoretical conformational energy calculations.     

The coordination chemistry of macrocyclic diamides. Transition metal complexes of 5,7-dioxo-1,4,8,11-tetraazacyclotetradecane

Summary A convenient preparation of the 14-membered macrocyclic diamide 5,7-dioxo-1,4,8,11-tetraazacyclotetradecane (LH₂) is described. The pK _NH ⁺ values of the ligand are pK₁ = 5.76 and pK₂ = 9.63 at 25° and I = 0.1 mol dm^–3 (KNO₃). With metal ions able to ionise amide hydrogens, the ligand acts as a planar quadridentate, L^2–. Thus copper(II) and nickel(II) give the neutral complexes ML, and conductivity measurements confirm that they are nonelectrolytes in aqueous solution. Both the nickel(II) and copper(II) complexes are acid labile unlike the analogues of 1,4,8,11-tetraazacyclotetradecane (cyclam).The cobalt(III) complex [CoL(NH₃)₂]Cl has been characterised and¹H n.m.r. measurements established the N-meso stereochemistry at the chiral nitrogen centres.     

1‐(β‐d‐Erythrofuranos­yl)cytidine (β‐erythrocytidine)

1‐(β‐d ‐Erythrofuranosyl)cytidine, C₈H₁₁N₃O₄, (I), a derivative of β‐cytidine, (II), lacks an exocyclic hydroxy­methyl (–CH₂OH) substituent at C4′ and crystallizes in a global conformation different from that observed for (II). In (I), the β‐d ‐erythrofuranosyl ring assumes an E₃ conformation (C3′‐exo; S, i.e. south), and the N‐glycoside bond conformation is syn. In contrast, (II) contains a β‐d ‐ribofuranosyl ring in a ³T₂ conformation (N, i.e. north) and an anti‐N‐glycoside linkage. These crystallographic properties mimic those found in aqueous solution by NMR with respect to furan­ose conformation. Removal of the –CH₂OH group thus affects the global conformation of the aldofuranosyl ring. These results provide further support for S/syn–anti and N/anti correlations in pyrimidine nucleosides. The crystal structure of (I) was determined at 200 K.     

2,3:4,6‐Di‐O‐isopropylidene‐α‐l‐sorbofuranose and 2,3‐O‐isopropylidene‐α‐l‐sorbofuranose

In the title compounds, C₁₂H₂₀O₆, (I), and C₉H₁₆O₆, (II), the five‐membered furanose ring adopts a ⁴T₃ conformation and the five‐membered 1,3‐dioxolane ring adopts an E₃ conformation. The six‐membered 1,3‐dioxane ring in (I) adopts an almost ideal ^OC₃ conformation. The hydrogen‐bonding patterns for these compounds differ substantially: (I) features just one intramolecular O—H...O hydrogen bond [O...O = 2.933 (3) Å], whereas (II) exhibits, apart from the corresponding intramolecular O—H...O hydrogen bond [O...O = 2.7638 (13) Å], two intermolecular bonds of this type [O...O = 2.7708 (13) and 2.7730 (12) Å]. This study illustrates both the similarity between the conformations of furanose, 1,3‐dioxolane and 1,3‐dioxane rings in analogous isopropylidene‐substituted carbohydrate structures and the only negligible influence of the presence of a 1,3‐dioxane ring on the conformations of furanose and 1,3‐dioxolane rings. In addition, in comparison with reported analogs, replacement of the –CH₂OH group at the C1‐furanose position by another group can considerably affect the conformation of the 1,3‐dioxolane ring.     

Synthon preference in a hydrated β‐resorcylic acid structure and its cocrystal with thymine

Multicomponent crystals or cocrystals play a significant role in crystal engineering, the main objective of which is to understand the role of intermolecular interactions and to utilize such understanding in the design of novel crystal structures. Molecules possessing carboxylic acid and amide functional groups are good candidates for forming cocrystals. β‐Resorcylic acid monohydrate, C₇H₆O₄·H₂O, (I), crystallizes in the triclinic space group P with one β‐resorcylic acid molecule and one water molecule in the asymmetric unit. The cocrystal thymine–β‐resorcylic acid–water (1/1/1), C₅H₆N₂O₂·C₇H₆O₄·H₂O, (II), crystallizes in the orthorhombic space group Pca2₁, with one molecule each of thymine, β‐resorcylic acid and water in the asymmetric unit. All available donor and acceptor atoms in (I) and (II) are utilized for hydrogen bonding. The acid and amide functional groups are well known for the formation of self‐complementary acid–acid and amide–amide homosynthons. In (I), an acid–acid homosynthon is observed, while in (II), an amide–acid heterosynthon is present. In (I), the β‐resorcylic acid molecule exhibits the expected intramolecular S(6) motif between the hydroxy and carbonyl O atoms, and an intermolecular R₂²(8) dimer motif between the carboxylic acid groups; only the former motif is observed in (II). The water solvent molecule in (I) propagates the discrete dimers into two‐dimensional hydrogen‐bonded sheets. In (II), thymine and β‐resorcylic acid molecules do not form self‐complementary amide–amide and acid–acid homosynthons; instead, a thymine–β‐resorcylic acid heterosynthon is observed. With the help of the water molecule, this heterosynthon is aggregated into a three‐dimensional hydrogen‐bonded network. The absence of thymine base pairing in (II) might be linked to the availability of additional functional groups and the preference of the donor and acceptor hydrogen‐bond combinations.     

Bispidine Platform as a Tool for Studying Amide Configuration Stability

In this work, the solution conformations of seventeen 3,7-diacyl bispidines were studied by means of NMR spectroscopy including VT NMR experiments. The acyl groups included alkyl, alkenyl, aryl, hetaryl, and ferrocene moieties. The presence of syn/anti-isomers and their ratios were estimated, and some reasons explaining experimental facts were formulated. In particular, all aliphatic and heterocyclic units in the acylic R(CO) fragments led to an increased content of the syn-form in DMSO-d₆ solutions. In contrast, only the anti-form was detected in DMSO-d₆ and CDCl₃ in the case when R = Ph, ferrocenyl, (R)-myrtenyl. In the case of a chiral compound derived from the natural terpene myrtene, a new dynamic process was found in addition to the expected inversion around the amide N-C(O) bond. Here, rotation around the CO-C=C bond in the acylic R fragment was detected, and its energy was estimated. For this compound, ΔG for amide N-C(O) inversion was found to be equal to 15.0 ± 0.2 kcal/mol, and for the rotation around the N(CO)–C^2′ bond, it was equal to 15.6 ± 0.3 kcal/mol. NMR analysis of the chiral bispidine-based bis-amide was conducted for the first time. Two X-ray structures are reported. For the first time, the unique syn-form was found in the crystal of an acyclic bispidine-based bis-amide. Quantum chemical calculations revealed the unexpected mechanism for amide bond inversion. It was found that the reaction does not proceed as direct N-C(O) bond inversion in the double-chair (CC) conformation but rather requires the conformational transformation into the chair–boat (CB) form first. The amide bond inversion in the latter requires less energy than in the CC form.     

Structure dependence in the solvolysis kinetics of amino acid esters

To better understand acyl transfer reactions of oligopeptides, seventeen N-acyl amino acid esters were solvolyzed in mildly basic methanol-d₄. All show pseudo-first-order kinetics by ¹H NMR. The rate constant varies up to 400-fold with the identity of the amino acid and up to 6200-fold with the identity of the N-acyl group. The impact of the N-acyl group on the rate constant is discussed in terms of crowding, amide conformation, and amide CO bond character.     

Cyclic Heptapeptides Axinastatin 2, 3, and 4: Conformational analysis and evaluation of the biological potential

The conformational analysis of naturally occurring cytostatic cyclic heptapeptides axinastatin 2, 3, and 4 was carried out by two-dimensional NMR spectroscopy in combination with distance-geometry (DG) and molecular-dynamics (MD) calculations in explicit solvents. The synthesized secondary metabolites were examined in (D₆)DMSO. Axinastatin 2 was also investigated in CD₃OH. In all structures, Pro² is in the i + 1 position of a βI turn and Pro⁶ occupies the i + 2 position of a βVIa turn about the cis amide bond between residue 5 and Pro^6. In all peptides, a bifurcated H-bond occurs between residue 4 CO and the amide protons of residue 1 and 7. For axinastatin 2 and 3, an Asn I_g turn was found about Asn¹ and Pro^2. We compared these structures with conformations of cyclic heptapeptides obtained by X-ray and NMR studies. A β-bulge motif with two β turns and one bifurcated H-bond is found as the dominating backbone conformation of cyclic all-L-heptapeptides. Axinastatin 2, 3, and 4 can be characterized by six trans and one cis amide bond resulting in a β/βVI(a)-turn motif, a conformation found for many cyclic heptapeptides. Detailed biological tests of the synthetic compounds in different human cancer cell lines indicates these axinastatins to be inactive or of low activity.     

A pipecolic acid (Pip)‐containing dipeptide,Boc‐d‐Ala‐l‐Pip‐NHiPr

The title dipeptide, 1‐(tert‐butoxy­carbonyl‐d ‐alanyl)‐N‐iso­propyl‐l ‐pipecol­amide or Boc‐d ‐Ala‐l ‐Pip‐NHⁱPr (H‐Pip‐OH is pipecolic acid or piperidine‐2‐carboxylic acid), C₁₇H₃₁N₃­O₄, with a d –l heterochiral sequence, adopts a type II′β‐­turn conformation, with all‐trans amide functions, where the C‐terminal amide NH group interacts with the Boc carbonyl O atom to form a classical i+3 i intramolecular hydrogen bond. The C^α substituent takes an axial position [H^α (Pip) equatorial] and the trans pipecolamide function is nearly planar.     

Controlling the Chair Conformation of a Mannopyranose in a Large‐Amplitude [2]Rotaxane Molecular Machine

Molecular machines boarding now! Molecular machines containing dibenzo[24]crown‐8 (DB24C8) and based on an anilinium and a pyridinium amide station have been prepared. The DB24C8 shuttles upon variation of pH and interacts differently with the pyridinium amide station depending on its substitution. When the DB24C8 sits around the disubstituted amide, the conformation of the pyranose changes from ¹C₄ to ⁴C₁.

     

N-Ethynylation of Anilides Decreases the Double-Bond Character of Amide Bond while Retaining trans-Conformation and Planarity

Activated amide bonds have been attracting intense attention; however, most of the studied moieties have twisted amide character. To add a new strategy to activate amide bonds while maintaining its planarity, we envisioned the introduction of an alkynyl group on the amide nitrogen to disrupt amide resonance by nN→C_sp conjugation. In this context, the conformations and properties of N-ethynyl-substituted aromatic amides were investigated by DFT calculations, crystallography, and NMR spectroscopic analysis. In contrast to the cis conformational preference of N-ethyl- and vinyl-substituted acetanilides, N-ethynyl-substituted acetanilide favors the trans conformation in the crystal and in solution. It also has a decreased double bond character of the C(O)−N bond, without twisting of the amide. N-Ethynyl-substituted acetanilides undergo selective C(O)−N bond or N−C(sp) bond cleavage reactions and have potential applications as activated amides for coupling reactions or easily cleavable tethers.     

X-ray diffraction study of the second crystal modification of bis(2-isopropylquinoline-8-thiolato)indium chloride

An X-ray diffraction study of the second crystal modification (II) of the title compound was carried out space group P2₁/c, a=16.216(5), b=16.109(5), c=19.519(4) Å, ?=99.97(3)^o, Z=8. We have compared geometric parameters of two independent molecules in modification II and one independent molecule in the first crystal modification I investigated previously. The comparison revealed pronounced differences in molecular conformations and in bond angles at the indium atom, which are due to differences in the crystal field effect. At the origin of coordinates of crystal structure II, a cavity was revealed probably containing a very disordered solvate water molecule.