Functional polymers and sequential copolymers by phase-transfer catalysis. 16. Influence of sequence distribution on the mesomorphic properties of thermotropic copolyethers containing 4,4′-dihydroxybiphenyl

Random and alternating thermotropic liquid-crystalline copolyethers have been synthesized from 4,4′-dihydroxybiphenyl and a 1/1 mol ratio of 1,5-dibromopentane and α,ω-dibromoalkanes by a two-phase (organic solvent-aqueous NaOH) phase-transfer-catalyzed polyetherification. Random copolyethers were prepared from α,ω-dibromoalkanes having six to twelve methylene units. Their phase behavior was compared with those of the perfectly alternating copolyethers containing five methylene units in one spacer and eight, nine, or eleven methylene units in the other, respectively. An odd-even dependence in thermal transitions has been observed in both oligomeric systems. In all cases, alternating copolyethers, even though comparatively lower in molecular weight, have given rise to higher melting and isotropization temperatures. Since the increase in the melting temperature is larger than the increase in the isotropization temperature, the thermal stability range of the mesophase has narrowed for alternating copolyethers with respect to their random copolyether counterparts.     

Functional polymers and sequential copolymers by phase transfer catalysis. XXVI. Synthesis and characterization of thermotropic liquid crystalline polypodants

Thermotropic liquid crystalline (LC) polyethers and copolyethers have been synthesized from 4,4′-dihydroxy-α-methylstilbene (HMS) and α,ω-dichlorooligo(oxyethylene)s having between 2 and 5 as well as 8.7 oxyethylene units. Copolyethers were prepared from a 1:1 mol/mol ratio of two dissimilar spacers. These polymers have been prepared by a phase transfer catalyzed (PTC) polyetherification of bisphenols with these electrophiles by utilizing 50 mol% tetrabutylammonium hydrogen sulfate per phenol group. Kinetic experiments with either 5 or 50 mol% catalyst vs phenol groups in the polyetherification of 4,4%-isopropylidenediphenol with 2-chloroethyl ether have shown that a change in catalyst primarily affects the rate of reaction, with 50 mol % being faster. The prepared polyethers and copolyethers are soluble in common organic solvents. Both polyethers and copolyethers are crystalline. Polymers prepared to contain tetraoxyethylene spacers exhibit monotropic LC behavior. Copolymers prepared to contain tri- and tetraoxyethylene spacers (1 : 1 mol/mol) [PE34] were the only polymers exhibiting enantiotropic LC behavior. Longer spacers tend to destabilize the phase transitions, as suggested by the dependence of thermal transition temperatures upon the differential scanning calorimeter rate. All prepared polymers act as podants in solution, measured by picrate extraction experiments. Solid state complexes have been prepared from the polymer with a pentaoxyethylene spacer [PE5] and PE34 with LiCF₃SO₃. PE5 can dissolve LiCF₃SO₃ in the range of 0.21–2.2 mol salt/mol polymer (m.r.u.) [S/P] without the observation of free salt. PE5 complexes of/or below S/P of 0.43, upon annealing at room temperature, exhibited the two melting transitons observed in the polymer alone. PE5 complexes of/or above S/P of 0.77 only exhibited a T_g. The T_g of PE5 complexes were found to change nonlinearly with S/P, while T_m1 changed linearly. T_m2 was independent of S/P. Only one complex with PE34 gave two transitions (T_m2,Tⁱ) in dynamic DSC experiments. Other PE34 complexes followed a behavior similar to PE5 complexes.     

Some aminophosphinocarboxylic acids and their derivatives

The addition of Schiff bases of α-aminoacid esters to vinylphosphoryl compounds was studied as a method for the synthesis of phosphinothricin and its analogues. The reaction was found to proceed smoothly in DMSO in the presence of strong nitrogen bases and under the conditions of phase transfer catalysis. The Claisen condensation of β-phosphorylated propionitrile with diethyl oxalate was studied; phosphorylated derivatives of hydroxycitraconic acid nitrile were prepared on hydrolysis; transformation of such a derivative into a cyclic imide as well as into trimethylsilyl esters of these acids and their Z → E transformation were investigated. Cyclization reactions between α,ω-dibromoalkanes and phosphoryl compounds containing an active methylene group affording cyclopropane and other cyclic derivatives were studied. The cyclopropane ring is cleaved by amines to give aminophosphinocarboxylic acids.     

Synthesis of 3-alkylquinoxalin-2(1<Emphasis Type="Italic">H</Emphasis>)-ones via Grignard reaction

A two-step procedure has been developed for the synthesis of 3-alkylquinoxalin-2(1H)-ones from o-phenylenediamine and ethyl 2-oxoalkanoates prepared by the Grignard reaction of diethyl oxalate with alkyl bromides. Analogous reaction with α,ω-dibromoalkanes instead of alkyl bromides leads to the formation of 3,3′-(alkane-α,ω-diyl)di[quinoxalin-2(1H)-ones].     

Triphenylene-based discotic liquid crystals: star-shaped oligomers and branched-chain polymers

Liquid crystalline main-chain polymers based on a repeat hexaalkoxytriphenylene moiety have previously been made by the reaction of dihydroxytetraalkoxytriphenylenes with α,ω-dibromoalkanes catalysed by caesium carbonate in N-methyl pyrrolidone. We now show that the molecular weights of these polymers can be increased by adding ?5 wt% of a tribromide (a 1,3,5-trialkoxybenzene or trialkoxymethylbenzene with three ω-bromoalkyl substituents) to the reaction mixture. Studies of model oligomer systems show that, provided the ω-bromoalkyl chains are long enough, the presence of these branching points should not affect the formation of the Col_h mesophase. Indeed, if ?5 wt% of the tribromide is used in the synthesis of the polymer, it remains liquid crystalline. However, if >20 wt% of the tribromide is used, introducing a high degree of branching and cross-linking, the liquid crystal behaviour disappears.     

Functional liquid-crystalline polyesters based on twin nonamethylene spaced p-oxybenzoate dyads and dithiols

A new series of thermotropic liquid-crystalline poly-(ester-β-sulphide)s 9Sn was prepared by reacting the mesogenic nona-methylene bis[4-(4-acryloyloxybenzoyloxy)benzoate] 1 with α,ω-alka-nedithiols of varying length. The polymers exhibit nematic and smectic mesophases, which are enantiotropic or monotropic in character, depending on the number n of methylene units in the dithiol precursor (n = 2–10). The phase transition parameters were determined and compared with those of closely related poly(ester-β-sulphide)s 6Sn. It is suggested that these systems may be suitable model polymers to test current theory of the existence of highly anisotropic or weakly anisotropic mesophases in polymers.     

Carbazole main-chain polymers for multifunctional materials: Synthesis and characterization

A series of α,ω-bis(3-formylcarbazolyl)alkane monomers have been prepared starting from carbazole and α,ω-dibromoalkane in two steps. Main-chain polymers with carbazole substituted with one acceptor group as the nonlinear optical (NLO) chromophores and photoconductive moieties were synthesized by the Knoevenagel polycondensation of α,ω-bis(3-formylcarbazolyl)alkane and 1,6-bis(cyanoacetoxy)hexane using 4-(N,N-dimethyl)pyridine (DMAP) as a base. This Knoevenagel polycondensation involved two stages: polycondensation was first carried out in tetrahydrofuran solution, and then polycondensation was allowed to continue in the solid-state after removal of solvent. All of these main-chain polymers characterized by spectroscopic methods and elemental analyses are soluble in common low boiling organic solvents, such as chloroform. These polymers were found to be amorphous with glass transition temperatures in the range of 94–117°C by differential scanning calorimetry. This two-stage polycondensation gave polymers with weight-average molecular weight in the range of 25,000–72,000 g/mol by gel permeation chromatography. The study of the nonlinear optical and photorefractive properties of these polymers is in progress. © 1996 John Wiley & Sons, Inc.     

Quaternary ammonium polymers from 1,4-diaza[2.2.2]bicyclooctane

Menschutkin reactions of 1,4-diaza[2.2.2]bicyclooctane with various α,α-dibromoalkanes and α,α′-dibromoxylenes have been studied in two solvent systems and at different temperatures. It was found that quaternary ammonium polymers could easily be prepared from this rigid, bicyclic, ditertiary amine.     

Synthesis of functionalized linear poly(divinylbenzene). II. Synthesis of poly(divinylbenzene) with hydroxyl pendants and/or endgroups

Poly(divinylbenzene) [poly(DVB)] derivatives having hydroxyl terminals and/or pendants were synthesized by chemical modifications (hydration and hydroxylation) of unsaturated linear poly(DVB) ( I ), which was prepared by the polymerization of DVB catalyzed by acetyl perchlorate. Hydroboration of both terminal and in-chain carbon–carbon double bonds in I with BH₃.THF complex yielded a fully hydrated poly(DVB) II , in which hydrophilic and hydrophobic groups are placed alternately. Selective hydroboration of the vinyl endgroups in I with 9-borabicyclo[3.3.1]nonane led to an α,ω-dihydroxy-poly(DVB) ( III ). Reaction of I with m-chloroperbenzoic acid gave fully epoxidated poly(DVB) IV , which was subsequently hydrated to yield polymer V consisting of glycol repeat units and terminals. The physical properties and reactions (chain extension and crosslinking) of these polymers were also studied.     

Study of bulk chain coupling reactions. III. Reaction between bisoxazolines or bisoxazlines and carboxy-terminated oligomers

2,2′-Bis(2-oxazoline) and 2,2′-bis[5,6-dihydro-(4H)-1,3-oxazine] have been used as chain coupling reagents ( CC ) and reacted in the bulk with α,ω-dicarboxy-poly(2,2′-oxydiethylene adipate) ( PS ) or with α,ω-dicarboxy-polyamide 12 ( PA ). The reactions have been followed by viscosimetry, titration of COOH groups and ¹H- and ¹³C-NMR spectroscopy. Either with the PS/CC or PA/CC systems, or with the model system dodecanoic acid ( DA )/ CC , the reactions were fast, since in most cases 80% conversion was reached after 15 min reaction. The expected DA dimer or high molar mass PA or PS polymers were obtained. No significant side reaction has been detected. The thermal stability of the resulting polymers is higher than that of starting oligomers. Due to the introduction of CC units in the chains, the crystallinity of PA/CC is slower than that of starting PA . © 1995 John Wiley & Sons, Inc.     

Synthesis and Biological Activity of Alkane-1,1-diylbis(phosphonates) of Diterpenoid Isosteviol

Russian Journal of Organic Chemistry - Isosteviol reacted with α,ω-dibromoalkanes to give 19-(ω-bromoahkyl) esters which were treated with tetraethyl methylenebis(phosphonate) to...     

Synthesis of poly(styrene-b-dimethylsiloxane) multi-block copolymers via polyhydrosilylation reaction

Poly(styrene-b-siloxane) multi-block copolymers have been prepared by polyhydrosilylation reaction. Four copolymers have been synthesized by the reaction of α,ω-bis silane polydimethylsiloxanes with α,ω-bis allyl polystyrene. The latter has been obtained by the reaction of carboxy-telechelic polystyrene with allyl glycidyl ether. ¹H NMR and FT-IR analyses show that the polyhydrosilylation reaction is quantitative. The copolymer molecular weights were determined by SEC to be about 25,000 g/mol. The properties of these copolymers were characterized by DSC and DMA analyses. The rubbery plateaus of these copolymers are in the range of −115 °C to 85 °C.     

Isomorphism in copolyamides of long repeating chain units containing oxa- and thia-alkylene linkages

Various copolyamides of long repeating chain units were prepared from hexamethylenediamine (HMDA) and p-xylylenediamine (PXDA) with aliphatic dicarboxylic acids of three structural types: α,ω-alkanedioic, α,ω-oxaalkanedioic, and α,ω-thiaalkanedioic acids. Both binary and ternary combinations of these dicarboxylic acids having the same number of chain atoms with the diamine afforded highly crystalline copolyamides. In all cases of these copolymers, the plots of the melting points versus the compositions are expressed by linear relations, even in the ternary systems. For example, the melting points of the copolyamides of HMDA with 6-oxaundecanedioic and 6-thiaundecanedioic acids are practically unchanged in all ranges of composition. The same relation is also observed in the corresponding copolyamides of PXDA. The relation between the densities and the composition is plotted with good linearity in every case. From x-ray examination, the lattice spacings of each copolyamide are ascertained to be unchanged by the composition. These results reveal that methylene, ether, and thioether linkages are in the relation of isomorphous replacements for each other in these copolyamide systems. Moreover, the linear relationship between the melting point and the composition is explained by assuming that the entropy of fusion in these copolyamides changes linearly according to the change of the composition.     

Facile synthesis of fused purines from 8-aminotheophylline

Fused purines 3a-f were prepared by one-step from 8-aminotheophylline ( 1 ) and α,ω-dibromoalkanes in N, N-dimethylformamide in the presence of sodium hydride. Reaction of 3c-e with chloroacetyl chloride followed by treatment with dimethylamine gave 6a-c . A one-step reaction of 1 with ethyl bromopropionate gave 1,3-dimethyl-1,2,3,4,6,7,8,9-octahydropyrimido[2,1-f]purine-2,4,8-trione ( 7b ). Facile syntheses of 7a, c, d from 1 were also carried out.     

Synthesis and mesomorphic behavior of a new series of side-chain liquid crystalline polymethacrylates bearing 2,6-naphthylene-based mesogen

A new homologous series of liquid crystalline (LC) polymethacrylates, the poly[ω-(2-phenoxycarbonyl-naphthalene-6-yloxy)alkyl methacrylate]s, in which the length of the alkyl spacer is varied between 3 and 12 methylene units, have been synthesized by free-radical polymerization. The prepared polymers were studied by IR and ¹H-NMR spectroscopy, viscosity measurements, differential scanning calorimetry (DSC), and polarized microscopy. Polymers with 3 or 4 methylene units spacer were glassy in nature, whereas those with 5–12 methylene units spacer exhibited smectic behavior. The glass transition temperatures decrease on increasing spacer length. The isotropization temperatures and the corresponding transition entropies showed an odd–even effect, with the odd members exhibiting the higher values. This effect attenuates on increasing spacer length. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2391–2399, 1999     

Thermotropic liquid‐crystalline poly(oxadiazole)s with poly(methylene) spacers: Preparation and extraordinary odd–even effect

A novel synthetic procedure for the preparation of poly(oxadiazole)s was developed with nucleophilic substitution of α,ω-alkanediols with oxadiazole-activated bisfluoride. Seven poly(oxadiazole)s were successfully prepared by the solution polymerization of 2,5-bis(4-fluorophenyl)-1,3,4-oxadiazole and various α,ω-alkanediols [HO (CH₂)_n OH, n = 5–10 or 12] in diphenyl sulfone at temperature greater than 230 °C with K₂CO₃ as a catalyst. The reduced viscosities of the poly(oxadiazole)s were 0.14–0.51 dL/g, and the decomposition temperatures were greater than 350 °C and decreased from 436 to 379 °C with increasing spacer length (n). Corresponding model compounds, consisting of two terminal mesogenic 2,5-bisphenyl-1,3,4-oxadiazole units and central poly(methylene) spacers, were also prepared for comparison. Both the polymers and model compounds exhibited an extraordinary odd–even effect: odd ones showed higher transition temperatures (melting and clearing temperatures). With differential scanning calorimetry, polarized optical microscopy (POM), and X-ray diffraction, we found that the nematic mesophase was the only texture in the melts except for the polymers with longer methylene units (n = 9), in which smectic mesophases were observed. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 293–301, 2002     

Polyazomethines derived from polynuclear dihydroxyquinones and siloxane diamines

New polyazomethines have been synthesized based on polynuclear dihydroxy quinones (5,8-dihydroxy-1,4-naphthoquinone and 1,4-dihydroxyanthraquinone) and siloxane diamines differing by the siloxane sequence length (1,3-bis(3-aminopropyl)tetramethyldisiloxane and α,ω-bis(3-aminopropyl)oligodimethylsiloxane having about 12 siloxane units/sequence). The structures were verified by spectral analyses. Solubility tests, GPC and viscosity measurements were performed. Some properties of the resulted polymers were investigated by thermal (TGA and DSC), electrical, spectral (UV-Vis) and electrochemical (differential pulse voltammetry) methods.     

Oligomers with four 3,4-quinolinediyl units and α,ω-bis (4-chloro-3-quinolinylthio)alkanes

Starting from the reaction of thioquinanthrene 1 with sodium methoxide followed by the reaction with α,ω-dihalogenoalkanes, title bis-methoxy oligomers 4a-c with four 3,4-quinolinediyl units were prepared (40–91%). Acid catalysed hydrolysis of methoxy groups in 4a-c gave tetramers 5a-c (46–94%) with two 4(1H)-quinolinone functions. The reactions of bis-quinolinones 5a-c with phosphoryl chloride in DMF run as deoxo-chlorination and afforded tide dichlorotetramers 6a-c (51–66%) with 4-chloroquinolinyl groups. The treatment of bis-methoxy tetramers 4a -c with boiling phosphoryl chloride led to title α,ω-bis(4-chloro-3-quinolinylthio)alkanes 7a-c (52–56%) and thioquinanthrene (65–70%).     

Synthesis of difunctional polystyrenes and their incorporation in block copolymers with bisphenol a polycarbonate

Block polymers of polystyrene and bisphenol A polycarbonate have been prepared and their bulk viscosities studied as functions of both shear stress and polystyrene block length. The polystyrene blocks were α,ω-diacid chlorides prepared from the reaction of “living” polystyrenes with diacid chlorides. These reactions were studied in order to discover the most effective way of preparing the polystyrene diacid chlorides. The polystyrene diacid chlorides are best prepared by reaction of disodiopolystyrene with phosgene. The flow properties of the block copolymers depend on the composition of the polymers but do not depend on the length of the polystyrene blocks.     

Liquid-crystalline behaviour of 4-(ω-aminoalkyloxy)-4′-cyanobiphenyls and their side chain epoxy polymers

Abstract

Liquid-crystalline side chain polymers were obtained from the ring-opening reaction of epoxy resin with mesogenic amines, 4-(ω-aminoalkyloxy)-4′-cyanobiphenyl. The amines with the alkyl group ranging from five to nine methylene units were synthesized, and were found to exhibit an enantiotropic nematic phase. Polymerization of these amines with ethylene glycol diglycidyl ether at 100°C yielded the polymers of low glass transition and melting temperatures. The mesomorphic properties of the amines and the resulting epoxy polymers are reported.