Cyclopolymerization of (E,E) - [6.2]paracyclophane-1,5-diene

Polymerization of (E,E)-[6.2]paracyclophane-1,5-diene proceeds by an intra–intermolecular mechanism to give a polymer containing a [3.2]paracyclophane in the repeat unit. Polymerization occurs with either free radical or cationic initiation; anionic initiation was unsuccessful. Cationic polymerization is favored and appears to proceed through a stabilized carbonium ion intermediate. Spectroscopic and model compound studies are consistent with the proposed polymer structure. Thermal analyses of the polymer indicate a complex thermooxidative behavior in the presence of oxygen, while depolymerization occurs above about 400°C in an inert atmosphere.     

Synthesis of through‐space conjugated polymers containing [2.2]paracyclophane and thieno[3,4‐b]pyrazine in the main chain

We synthesized through‐space conjugated polymers with [2.2]paracyclophane and thieno[3,4‐b]pyrazine units in the main chain by the Sonogashira–Hagihara coupling reaction. The obtained polymers were soluble in common organic solvents, and homogeneous thin films were readily obtained from the polymer solutions by spin‐coating techniques. The polymers exhibited the extension of the conjugation length via the through‐space interaction. The polymers showed orangish‐red emission with peak maxima of around 610 nm in diluted solutions and their thin films, which were derived from the thieno[3,4‐b]pyrazine moieties. The optical and electrochemical behaviors of the polymers containing pseudo‐para‐ and pseudo‐ortho‐linked [2.2]paracyclophane were identical. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2009     

Thermal degradation of poly((E,E)-[6.2]paracyclophane-1,5-diene)

Thermal degradation of poly((E,E)-[6.2]paracyclophane-1,5-diene) is studied in inert and oxidative environments by using thermogravimetric analysis, pyrolysis GC/MS, pyrolysis GC/FT-IR, and variable temperature-diffuse reflectance infrared spectroscopy (VT-DRIFTS). Thermal degradation in helium begins by depolymerization yielding a volatile product capable of abstracting hydrogens from the polymer residue. Multiple hydrogen abstractions result in a variety of volatile species containing benzyl-benzyl bonds. In the presence of oxygen, polymer decomposition is dictated by reactions of peroxy and hydroperoxy radicals. At low temperatures, oxygenated species are the primary products. At higher temperatures, increased unsaturation is detected in the polymer residue. In both inert and oxidative environments, the strain associated with alignment of paracyclophane aromatic rings is lost during the initial stages of thermal degradation. © 1992 John Wiley & Sons, Inc.     

Stacked 1,3,5-tris[(2,5-dimethylphenyl)ethynyl]benzenes: dimer and conjugated microporous polymer

A new [2.2]paracyclophane compound consisting of two 1,3,5-tris[(2,5-dimethylphenyl)ethynyl]benzenes stacked in proximity to each other. The compound exhibited a unique absorption band (cyclophane band) and an emission from the phane state, both of which were derived from the π-π stacking of the poorly extended conjugation systems of 1,3,5-tris[(2,5-dimethylphenyl)ethynyl]benzene. In addition, a conjugated microporous polymer (CMP) that comprises pseudo-para-substituted [2.2]paracyclophane was prepared. The obtained CMP is regarded as a polymer, in which 1,3,5-tris[(2,5-dimethylphenyl)ethynyl]benzenes are infinitely stacked to form a network structure. The CMP exhibited a type I nitrogen gas sorption profile and an H4-like hysteresis loop, and possessed the slit-like mesopores with a BET surface area of 501 m² g⁻¹.     

Weak C—H...N[triple‐bond]C hydrogen bonds in the structures of two poly(cyano)‐substituted ring systems

In benzene‐1,2,3‐tricarbonitrile, C₉H₃N₃, the packing of the two independent molecules is three‐dimensional and complex, involving inter alia bifurcated (C—H)₂...N systems from neighbouring CH groups. In [2.2]paracyclophane‐4,5,12,13‐tetracarbonitrile, C₂₀H₁₂N₄, the [2.2]paracyclophane systems display the usual distortions, namely lengthened C—C bonds and widened sp³ angles in the bridges, narrow angles in the six‐membered rings at the bridgehead atoms, and flattened boat conformations of the rings. The molecules are linked by a series of C—H...N interactions to form layers parallel to the ab plane.     

Synthesis and Characterization of Tetraazaparacyclophane Disulfone

1,6,20,25‐Tetraaza[6.1.6.1]paracyclophane‐13,32‐disulfone D was synthesized under a very dilute condition by the cyclization between tetramethylene dibromide and N,N′‐di‐p‐tosylaminodiphenylsulfone B, which was prepared using N,N′‐diaminodiphenyl sulfone and p‐toluenesulfonyl as raw materials. 1,6,20,25‐Tetra‐sulfoferrocene‐1,6,20,25‐tetraaza[6.1.6.1]paracyclophane‐13,32‐disulfone E was prepared by modifying D with the bioactive unit ferrocene. The structures were confirmed by IR, ¹H NMR, and elemental analysis.     

Control of Axial Chirality by Planar Chirality Based on Optically Active [2.2]Paracyclophane

Optically active X-shaped molecules based on the planar chiral [2.2]paracyclophane building block were prepared, in which di(methoxy)terphenyl units were stacked on the central benzene rings. At 25 °C, anisolyl rings freely rotate in solution, while in the crystal form, they are fixed by intramolecular CH–π interactions, thereby leading to the expression of the axial chirality, i.e., propeller chirality was exhibited by the planar chiral [2.2]paracyclophane moiety. The X-shaped molecule exhibited good circularly polarized luminescence (CPL) profiles with moderate Φ_PL and a large g_lum value in the order of 10⁻³ at 25 °C, in solution. In contrast, at −120 °C, dual CPL emission with opposite signs was observed. According to the theoretical studies, the rotary motion of the anisolyl units is suppressed in the excited states, and so emission from two isomers could be observed. These results demonstrate that the axial chirality was controlled by the planar chirality, leading ultimately to propeller chirality.     

C3 cyclopolymerization. I. Is the cyclopolymerization of 1,3-bis(p-vinylphenyl)-propane by means of radical or anionic initiators possible?

Polymerization of 1,3-bis(p-vinylphenyl) propane (St-C₃-St) was investigated by using radical and anionic initiators. Radical polymerization yielded linear polymer with pendant styryl groups in pertinent conditions without gelation. Anionic polymerization with n-butyllithium and sodium naphthalene produced insoluble polymers that, according to infrared (IR) spectroscopy, had no cyclized units. On the other hand, phenylmagnesium bromide gave soluble polymer in HMPA-benzene mixed solvent. Zero-valent nickel catalyst also gave soluble polymer. The soluble polymers could be analyzed by several spectroscopies, and it was confirmed that those obtained by anionic and coordination polymerization had no [3.3]paracyclophane units in the main chain. From these results it was concluded that cationic propagation could be assumed if the polymer Of St-C₃-St contained [3.3]paracyclophane units in the main chain.     

Interaction of cetyltrimethylammonium bromide and poly(2-(acrylamido)-2-methylpropanesulfonic acid) in aqueous solutions determined by excimer fluorescence

 The binding interaction of the cationic surfactant cetyltrimethylammonium bromide (CTAB) and anionic poly(2-(acrylamido)-2-methylpropanesulfonic acid) (PAMPS) in dilute aqueous solutions was studied using the excimer fluorescent emission of the cationic probe 1-pyrenemethylamine hydrochloride (PyMeA·HCl). In the absence of CTAB, the saturation binding of PyMeAH⁺ on PAMPS is about 2.4 AMPS repeat units for one probe cation as determined by the relative emission intensity, I _E/I _M, of the excimer to monomer. With increasing CTAB concentration, I _E/I _M firstly increases, reaches a maximum, then decreases to zero. The I _E/I _M maximum indicates a critical aggregation concentration (cac) of 10⁻⁵ mol/l for CTAB in PAMPS solutions. The CTAB concentration at which I _E/I _M is zero is exactly equal to the PAMPS concentration, indicating that the probe cation is thoroughly excluded from the binding site of PAMPS by the CTAB cation and the equivalent stoichiometric aggregation is formed between CTAB and PAMPS. The blueshift of the excimer emission and the excitation spectra shows that the decrease of I _E/I _M with increasing CTAB concentration above the cac is caused mainly by the decrease of the static excimer. Received: 26 July 2000 Accepted: 23 November 2000     

Transannular Hydrogen Bonding in Planar‐Chiral [2.2]Paracyclophane‐Bisamides

A series of [2.2]paracyclophane‐bisamide regioisomers and alkylated comparators were designed, synthesized, and characterized in order to better understand the transannular hydrogen bonding of [2.2]paracyclophane‐based molecular recognition units. X‐Ray crystallography shows that transannular hydrogen bonding is maintained in the solid‐state, but no stereospecific self‐recognition is observed. The assignment of both transannularly and intermolecularly hydrogen bonded N?H stretches could be made by infrared spectroscopy, and the effect of transannular hydrogen bonding on amide bond rotation dynamics is observed by ¹H‐NMR in nonpolar solvents. The consequences of transannular hydrogen bonding on the optical properties of [2.2]paracyclophane is observed by comparing alkylated and non‐alkylated pseudo‐ortho 4,12‐[2.2]paracyclophane‐bisamides. Finally, optical resolution of 4‐mono‐[2.2]paracyclophane and pseudo‐ortho 4,12‐[2.2]paracyclophane‐bisamides was achieved through the corresponding sulfinyl diastereoisomers for circular dichroism studies. Transannular hydrogen bonding in [2.2]paracyclophane‐amides allows preorganization for self‐complementary intermolecular assembly, but is weak enough to allow rapid rotation of the amides even in nonpolar solvents.     

Synthesis,optical properties,and electroluminescence of conjugated poly(p‐phenylenevinylene) derivatives containing 1,3,4‐oxadiazole and pyridine rings in the main chain

Three new poly(p‐phenylenevinylene) derivatives—PO, POD, and POP—with oxadiazole and pyridine rings along the main chain were synthesized via Heck coupling. The polymers were amorphous and dissolved readily in common organic solvents. They showed relatively low glass‐transition temperatures (up to 42 °C) and satisfactory thermal stability. Solutions of the polymers emitted blue‐greenish light with photoluminescence (PL) emission maxima around 460 nm and PL quantum yields of 0.28–0.49. Thin films of the polymers displayed PL emission maxima at 461–521 nm, and their tendency to form aggregates was significantly influenced by the chemical structure. Light‐emitting diodes with polymers PO and POP, with an indium tin oxide/poly(ethylenedioxythiophene) (PEDOT)/polymer/Ca configuration, emitted yellow and green light, respectively, and this could be attributed to excimer emission. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3212–3223, 2004     

Photophysics,electrochemical properties,and electroluminescence of poly(p‐phenylenevinylene) derivatives with 1,3,5‐triphenylbenzene or 2,4,6‐triphenylpyridine segments along the backbone

The steady‐state and time‐resolved photoluminescence (PL), electrochemical behavior, and electroluminescence (EL) of didodecyloxy poly(p‐phenylenevinylene)‐based polymers that contained along the backbone structure 1,3,5‐triphenylbenzene (PC) or 2,4,6‐triphenylpyridine (PN) were studied. An intensive green PL broad‐band emission with maxima at 516 and 527 nm was observed from thin films of PC and PN polymers, respectively, redshifted in comparison with the PL emission spectra measured in tetrahydrofuran solutions. The PL decay dynamics revealed the existence of more than one excited species, and the decay curves were best described by three‐term exponential functions with a dominant lifetime of about 1 ns. The results of time‐resolved PL and steady‐state PL studies indicated excimer or aggregate formation. Both polymers oxidized irreversibly. A quasireversible reduction was observed in the PN polymer, whereas the PC polymer reduced irreversibly. For PC, slightly higher values of the ionization potential (E_IP) and electron affinity (E_A) were found (E_IP = 5.52 eV, E_A = 2.85 eV) than those for PN (E_IP = 5.37 eV, E_A = 2.77 eV). Light‐emitting devices with indium tin oxide hole‐injecting and aluminum electron‐injecting electrodes were prepared and studied. They emitted green light, and their EL spectra were similar to those of PL thin films. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 524–533, 2006     

Diepoxy[18]annulene(10.0) : (Z,E,Z,E,Z)‐Diepoxy[18]annulen(10.0) – ein hochdynamisches Annulen

Diepoxy[18]annulenes(10.0): ( Z , E , Z , E , Z )‐Diepoxy[18]annulene(10.0) – a Highly Dynamic Annulene The McMurry reaction of (all‐E)‐5,5′‐([2,2′‐bifuran]‐5,5′‐diyl)bis[penta‐2,4‐dienal] ( 13 ) only occurs intramolecularly to give a mixture of the diepoxy[18]annulenes(10.0) 6 and 7 . Tetraepoxy[36]annulene(10.0.10.0) resulting from an intermolecular McMurry reaction is not formed. According to spectroscopic data, 6 is (Z,E,Z,E,Z)‐ and 7 (Z,E,E,Z,E)‐configured. The ¹H‐NMR data confirm that in 6 the (E)‐ethene‐1,2‐diyl bonds (C(11)=C(12) and C(15)=C(16)) rotate around the adjacent σ‐bonds. Beginning at −70°, this rotation freezes, and 6 is becoming a diatropic aromatic ring system. Beside [18]annulene itself, (Z,E,Z,E,Z)‐diepoxy[18]annulene(10.0) 6 is the only hitherto known [18]annulene derivative with dynamic properties.     

The synthesis and characterization of ( E,E )-dioxime and its transition metal complexes containing 12-membered macrocycles linked to ferrocenyl-methyl groups

13,14-bis(Hydroxyimino)-4,7-bis(ferrocenylmethyl)-2,3,4,5,6,7,8,9-octahydrobenzo[k]-4, 7-diaza-1,10-dithiacyclododecine[13,14-g]-quinoxaline (H₂L) has been prepared from (E,E)-dichloroglyoxime and 12,13-diamino-4,7-bis(ferrocenylmethyl)-2,3,4,5,6,7,8,9-octahydrobenzo[k]-4,7-diaza-1,10-dithiacyclododecine which was synthesized from 12,13-dinitro-4,7-bis(ferrocenylmethyl)-2,3,4,5,6,7,8,9-octahydrobenzo[k]4,7-diaza-1,10-dithia cyclododecine. Mononuclear nickel(II) and copper(II) complexes of H₂L have a metal-ligand ratio of 1?:?2 and the ligand coordinates through two nitrogen atoms, as do most (E,E)-dioximes. The homotrinuclear [Cu(L)₂Cu₂(dipy)₂](NO₃)₂ compound coordinates to the other two copper(II) ions through deprotonated oximate oxygens and two 2,2′-dipyridyl as an end-cap ligand to yield the trinuclear structure. The ligand and its complexes have been characterized on the basis of ¹H, ¹³C NMR, IR and MS spectroscopy and elemental analyses.     

A Doubly Alkynylpyrene‐Threaded [4]Rotaxane That Exhibits Strong Circularly Polarized Luminescence from the Spatially Restricted Excimer

The Sonogashira coupling of γ‐CD‐encapsulated alkynylpyrenes with terphenyl‐type stopper molecules gave a doubly alkynylpyrene‐threaded [4]rotaxane. The rotaxane showed only excimer emission, with a high fluorescence quantum yield of Φ_f=0.37, arising from the spatially restricted excimer within the cavity of the γ‐CD. The excimer emission suffered little from self‐quenching up to a concentration of 1.5×10^?5 M and was circularly polarized with a high g_lum value of ?1.5×10^?2. The strong circularly polarized luminescence may result from the two stacked pyrenes existing in the rotaxane in an asymmetrically twisted manner.     

Reduktion von 1,2-bis[(Z)-(2-nitrophenyl)-NNO-azoxy]benzol: Synthese von Cyclotrisazobenzol ( = (5E,6aZ,11E,12aZ,17E,18aZ)-5,6,11,12,17,18-Hexaazatribenzo[aei][1,3,5,7,9,11]cyclododeca-hexaen)

Reduction of 1,2-Bis[(Z)-(2-nitrophenyl)-NNO-azoxy]benzene¹: Synthesis of Cyclotrisazobenzene ( = (5E,6aZ,11E,12aZ,17E,18aZ)-5,6,11,12,17,18-Hexaazatribenzo[aei][1,3,5,7,9,11]cyclododeca-hexaene) Na₂S reduction of 1,2-bis[(Z)-(2-nitrophenyl)-NNO-azoxy]benzene ( 2 ) yielded 3 deoxygenated products: the (known) red 2,2′-((E,E)-1,2-phenylenbisazo)dianiline ( 3 , 23%), the orange 2-[2-((E)-2-aminophenylazo)phenyl]-2H-benzotriazol ( 4 , 55%) and the colorless 2,2′-(1,2-phenylene)di-2H-benzotriazol ( 5 , 13%). The constitutions of 3 – 5 and of 6 , the N-acetyl derivative of 4 , were deduced from their ¹H-NMR spectra (chemical shifts, couplings, and symmetry properties), and the configurations of 3 , 4 , and 6 at their N,N-double bonds are assumed to be the same as in 2 . Oxidation of 3 with 2 mol-equiv. of Pb(OAc)₄ afforded 5 (47%) and a novel, highly symmetrical macrocycle, called cyclotrisazobenzene ( 7 , 24%). The constitution of 7 as a tribenzo-hexaaza[12]annulene and its (E)-configuration at the N,N-bonds was confirmed by X-ray analysis. The molecular symmetry expressed by the ¹H-, ¹³C- and ¹⁵N-NMR spectra of 7 reveals a rapid torsional motion around the six N,C bonds. This implies that the N,N-double bonds in the cyclic 12π-electron system (or 24π-electron system if the benzene rings are included) of 7 are highly localized.     

The `cyclophene' [2.2.2](1,2,4)cyclophan‐9‐ene

In the title compound, C₁₈H₁₆, the [2.2]paracyclophane geometry is restrained to a considerable extent despite the introduction of the extra C=C bridge; typical paracyclophane features, such as the elongated C—C bridges, are still observed. However, the bridgehead atoms of the C=C bridge are forced into unusually close proximity [2.657 (3) Å], which in turn causes the rings to be rotated to an interplanar angle of 13.7 (2)°. The packing involves hexagonally close‐packed layers of molecules parallel to the xy plane, corresponding to the known `7,11' pattern of paracyclophanes, but without significant short intermolecular contacts.     

An ESR study of polymer-Cu(II) complexes in poly(vinyl alcohol), polyacrylamide,and poly(vinyl pyrrolidone) films

Optical and ESR spectra of polymer-Cu(II) complexes in polymer films have been studied. The dependence on F₁ = [Cu²⁺]/[MU] and F₂ = [OH^?]/[Cu²⁺], where [MU] is the molar concentration of monomeric units of the polymer, has been obtained. Optical spectra and potentiometric titration curves in solution have also been studied. There exists a buffer region 0 ? F₂ ? 2. Optical spectra in films are slightly different from those in solutions. At least five different ESR signals, designated as A, B, C or D, and E, have been found in poly(vinyl alcohol)-Cu(II). These signals appear successively with increasing F₂. Assignments are proposed as follows. Signal A (F₂ ≈ 0), also found in poly(acrylamide)-Cu(II) and poly(vinyl pyrrolidone)-Cu(II), is due to a single Cu(II) coordinated with two water molecules and chelated with two oxygens or nitrogens attached to the polymer. A chain of Cu(II) ions singly and double bridged with OH^? ions is responsible for the B signal (F₂ ≈ 1). The C and D signals (F₂ ≈ 2) appear to be caused, respectively, by a dimeric Cu(II) complex singly or doubly bridged with OH^? ions. The E signal (F₂ ≈ 7) appears to be due to a monomeric Cu(II) complex, different from that responsible for the A signal.     

Fluorescent and Electrochemical Sensing of Polyphosphate Nucleotides by Ferrocene Functionalised with Two ZnII(TACN)(pyrene) Complexes

The [Fc? bis{Zn^II(TACN)(Py)}] complex, comprising two Zn^II(TACN) ligands (Fc=ferrocene; Py=pyrene; TACN=1,4,7‐triazacyclononane) bearing fluorescent pyrene chromophores linked by an electrochemically active ferrocene molecule has been synthesised in high yield through a multistep procedure. In the absence of the polyphosphate guest molecules, very weak excimer emission was observed, indicating that the two pyrene‐bearing Zn^II(TACN) units are arranged in a trans‐like configuration with respect to the ferrocene bridging unit. Binding of a variety of polyphosphate anionic guests (PPi and nucleotides di‐ and triphosphate) promotes the interaction between pyrene units and results in an enhancement in excimer emission. Investigations of phosphate binding by ³¹P NMR spectroscopy, fluorescence and electrochemical techniques confirmed a 1:1 stoichiometry for the binding of PPi and nucleotide polyphosphate anions to the bis(Zn^II(TACN)) moiety of [Fc? bis{Zn^II(TACN)(Py)}] and indicated that binding induces a trans to cis configuration rearrangement of the bis(Zn^II(TACN)) complexes that is responsible for the enhancement of the pyrene excimer emission. Pyrophosphate was concluded to have the strongest affinity to [Fc? bis{Zn^II(TACN)(Py)}] among the anions tested based on a six‐fold fluorescence enhancement and 0.1 V negative shift in the potential of the ferrocene/ferrocenium couple. The binding constant for a variety of polyphosphate anions was determined from the change in the intensity of pyrene excimer emission with polyphosphate concentration, measured at 475 nm in CH₃CN/Tris‐HCl (1:9) buffer solution (10.0 mM , pH 7.4). These measurements confirmed that pyrophosphate binds more strongly (K_b=(4.45±0.41)×10⁶ M ^?1) than the other nucleotide di‐ and triphosphates (K_b=1–50×10⁵ M ^?1) tested.     

C3 cyclopolymerization. II. Charge-transfer cyclopolymerization of 1,3-bis(p-vinylphenyl)-propane

The thermal and photoinduced polymerization of 1,3-bis(p-vinylphenyl)propane was carried outby using tetracyanoethylene as a strong electron acceptor in several solvents. This cyclopolymerization produced polymer that contained [3.3]paracyclophane units in the main chain. The solvent and additive effect of polymerization inhibitors as well as the polymer structure suggest clearly that both polymerization proceeded in a cationic mechanism.