Radikalische Cyclisierungen von Alkenyl-substituierten 4,5-Dihydro-1,3-thiazol-5-thiolen

Radical Cyclizations of Alkenyl-Substituted 4,5-Dihydro-1,3-thiazole-5-thiols Heating of 5-alkenyl- or 5-alkinyl-4,5-dihydro-1,3-thiazole-5-thiols of type 5 in the presence of a radical initiator gave dithiaspirobicycles in fair-to-excellent yield (Scheme 3). Under analogous conditions, the 4,5-dihydro-4-vinyl-1,3-thiazole-5-thiol 5d underwent a cyclization to give the annellated dithiabicycle 7 (Scheme 4). In this reaction, a minor product 8 was formed by an unknown reaction mechanism. The structure of 8 was established by X-ray crystallography. The starting 1,3-thiazole-5-thiols 5 have been synthesized by carbophilic alkylation of me C?S group of 1,3-thiazole-5(4H)-thiones with Grignard-reagents or alkylcuprates. The thiazolethiones were obtained by the reaction of 3-amino-2H-azirines with thiobenzoic acid followed by sulfurization and cyclization. The 4-benzyl derivative 1b was thermally rearranged via 1,3-benzyl migration to yield the benzyl (1,3-thiazol-5-yl) sulfide 11 (Scheme 5).     

Bildung von 5,6-Dihydro-1,3(4H)-thiazin-4-carbonsäure-estern aus 4-Allyl-1,3-thiazol-5(4H)-onen

Formation of Methyl 5,6-Dihydro-l, 3(4H)-thiazine-4-carboxyiates from 4-Allyl-l, 3-thiazol-5(4H)-ones . The reaction of N-[1-(N, N-dimethylthiocarbamoyl)-1-methyl-3-butenyl]benzamid ( 1 ) with HCl or TsOH in MeCN or toluene yields a mixture of 4-allyl-4-methyl-2-phenyl-1,3-thiazol-5(4H)-one ( 5a ) and allyl 4-methyl-2-phenyl-1,3-thiazol-2-yl sulfide ( 11 ; Scheme 3). Most probably, the corresponding 1,3-oxazol-5(4H)-thiones B are intermediates in this reaction. With HCl in MeOH, 1 is transformed into methyl 5,6-dihydro-4,6-dimethyl-2-phenyl-1,3(4H)-thiazine-4-carboxylate ( 12a ). The same product 12a is formed on treatment of the 1,3-thiazol-5(4H)-one 5a with HCl in MeOH (Scheme 4). It is shown that the latter reaction type is common for 4-allyl-substituted 1,3-thiazol-5(4H)-ones.     

Synthesis and Addition Reactions of 1,3-Thiazole-5(4H)-thione Oxides

1,3-Thiazole-5(4H)-thione oxides 2 were prepared by oxidation of the corresponding 1,3-thiazole-5(4H)-thiones 1 with m-chloroperbenzoic acid (Table 1). Addition reactions of 2 with organolithium and Grignard reagents yielded 4,5-dihydro-4,4-dimethyl-1,3-thiazol-5-yl methyl sulfoxides of type 4 via thiophilic attack (Table 2). Whereas the reaction with the organolithium compounds proceeded with fair-to-excellent yields, the Grignard reagents reacted only very sluggishly. The sulfoxides 4 could also be prepared via oxidation of 4,5-dihydro-4,4-dimethyl-5-(methylthio)-1,3-thiazoles of type 3 with m-chloroperbenzoic acid, together with the corresponding sulfones 5 (Scheme 1).     

Umsetzung von Di(tert-butyl)- und Diphenyldiazomethan mit 1,3-Thiazol-5(4H)-thionen: Isolierung und Kristallstruktur des primären Cycloadduktes

Reaction of Di(tert-butyl)- and Diphenyldiazomethane and 1,3-Thiazole-5(4H)-thiones: Isolation and Crystal Structure of the Primary Cycloadduct Reactions of diazo compounds with C?S bonds proceed via the formation of thiocarbonyl ylides, which, under the reaction conditions, undergo either 1,3-dipolar cycloadditions or electrocyclic ring closer to thiiranes (Scheme 1). With the sterically hindered di(tert-butyl)diazomethane ( 2c ), 1,3-thiazole-5(4H)-thiones 1 react to give spirocyclic 2,5-dihydro-1,3,4-thiadiazoles 3 (Scheme 2). These adducts are stable in solution at ?20°, and they could be isolated in crystalline form. The structure of 3c was established by X-ray crystallography. In CDCl₃ solution at room temperature, a cycloreversion occurs, and the adducts of type 3 are in an equilibrium with 1 and 2c . In contrast, the reaction of 1 with diphenyldiazomethane ( 2d ) gave spirocyclic thiiranes 4 as the only product in high yield (Scheme 3). The crystal structure of 4b was also determined by X-ray analysis. The desulfurization of compounds 4 to 4,5-dihydro-5-(diphenylmethylidene)-1,3-thiazoles 5 was achieved by treating 4 with triphenylphosphine in boiling THF. The crystal structure of 5f is shown.     

Reaction of acetylenedicarboxylic acids esters with 4,5-dihydro-1<Emphasis Type="Italic">H</Emphasis>-pyrazole-1-carbothioamides and 3,4,5,6-tetrahydro-2<Emphasis Type="Italic">H</Emphasis>-1,2,4-triazepine-3-thiones

The reactions of dimethyl acetylenecarboxylate with 3,4,5,6-tetrahydro-2H-1,2,4-triazepine-3-thiones and 4,5-dihydro-1H-pyrazole-1-carbothioamides are convenient methods for the synthesis of 7,8-dihydrothiazolo[3,2-b][1,2,4]triazepin-3-ones derivatives and methyl esters of (2Z)-[2-(4,5-dihydro-1H-pyrazol-1-yl)-4-oxo-1,3-thiazol-5(4H)-ylidene]acetic acids, respectively. The reaction of methyl propynoates with 4,5-dihydro-1H-pyrazole-1-carbothioamides or with 5,5,7-trimethyl-2,4,5,6-tetrahydro-3H-1,2,4-triazepine-3-thione gives 2-(4,5-dihydro-1H-pyrazol-1-yl)-4H-1,3-thiazin-4-ones.     

N-(1,3-Thiazol-5(4H)-yliden)amine aus 1,3-dipolaren Cycloadditionen von Aziden mit 1,3-Thiazol-5(4H)-thionen

N-(1,3-Thiazol-5(4H)-ylidene)amines via 1,3-Dipolar Cycloaddition of Azides and 1,3-Thiazol-5(4H)-thiones Organic azides 5 and 4,4-dimethyl-2-phenyl-1,3-thiazol-5(4H)-thione ( 2 ) in toluene at 90° react to give the corresponding N-(1,3-thiazol-5(4H)-ylidene)amines (= 1,3-thiazol-5(4H)-imines) 6 in good yield (Table). A reaction mechanism for the formation of these scarcely investigated thiazole derivatives is formulated in Scheme 3: 1,3-Dipolar azide cycloaddition onto the C?S group of 2 leads to the 1:1 adduct C . Successive elimination of N₂ and S yields 6 , probably via an intermediate thiaziridine E .     

Carbophile Additionen von Organocupraten mit 1,3-Thiazol-5(4H)-thionen

Carbophilic Additions of Organocuprates and 1,3-Thiazole-5(4H)-thiones Organocuprates and 1,3-thiazole-5(4H)-thiones 1 react in THF at 0° via carbophilic addition onto the C? S bond to give 4,5-dihydro-1,3-thiazole-5-thiols 3 (Scheme 3). This observation is in marked contrast to the previously described reaction of organolithium compounds and 1 , which undergo a thiophilic addition onto the exocyclic S-atom. As an exception, treatment of the 1,3-thiazole-5(4H)-thione 1a with tert-butyl cuprate leads to 7a (Scheme 3).     

Synthese von (Methylthio)penam-Derivaten durch Keten-Addition an 4,5-Dihydro-5-(methylthio)-1,3-thiazole

Synthesis of (Methylthio)penam Derivatives via Keten Addition onto 4,5-Dihydro-5-(methylthio)-1,3-thiazoles The 4,5-dihydro-5-(methylthio)-2-phenyl-1,3-thiazoles 3a and 3b , easily prepared from the corresponding 1,3-thiazol-5(4H)-thiones and MeLi, react with dichloroacetyl chloride ( 5a ) and acidoacetyl chloride ( 5b ) in the presence of Et₃N to give (methylthio)penam derivatives 6 (Table 1). The reaction mechanism is either a [2 + 2] cycloaddition of in situ generated ketene or a two-step reaction (Scheme 2). The structure of 6f has been confirmed by X-ray crystallography (Fig. 2). The relative configuration of 6a-e follow from comparison of their ¹H-NMR spectra with those of 6f (Fig. 1). The 6-azidopenams 6d and 6f have been reduced to aminopenams 8a and 8b , respectively. Acylation of 8a with phenacetyl chloride yields 9 (Scheme 4).     

Stereoselective Synthesis of Alkyl Z -2-(2-Amino-4-oxo-1,3-thiazol-5(4 H )-yliden)Acetates in Solventless Conditions

Tiourea reacts with dialkyl acetylenedicarboxylates in solventless conditions to form 1:1 adducts, which undergo a cyclization reaction to produce alkyl Z-2-(2-amino-4-oxo-1,3-thiazol-5(4H)-yliden)acetates in fairly good yields. The stereochemistry of the ethyl Z-2-(2-amino-4-oxo-1,3-thiazol-5(4H)-yliden)acetate was established by the use of X-ray single crystal structure analysis. The reaction is completely stereoselective.     

Regioselektive 1,3-dipolare Cycloadditionen von Thiocarbonyl-yliden mit 1,3-Thiazol-5(4H)-thionen

Regioselective 1,3-Dipolar Cycloadditions of Thiocarbonyl Ylides with 1,3-Thiazole-5(4H)-thiones The thiocarbonyl ylides 13 and 1,3-thiazol-5(4H)-thiones 1 undergo a smooth reaction to yield spirocyclic 1,3-dithiolanes 14 – 16 (Schemes 4–6). The 1,3-dipolar cycloadditions occur in a regioselective manner, but the orientation of the thiobcnzophenone-S-methylide ( 13b ) differs from that of the cycloalkane thione-S-methylides 13a and 13c . Whereas the 1,3-cycloadduct with 13b is formed in accordance with frontier-orbital considerations, the inverse orientation in the reactions with 13a and 13c most likely is the result of steric hindrance in the transition state. The thiocarbonyl ylides have been prepared in situ from the corresponding 2,5-dihydro-1,3,4-thiadiazoles 12 . The more stable aliphatic precursors 12a and 12c undergo decomposition at 50°, the unstable 12b at ?30°.     

1,4-Dithiafulvene aus der Umsetzung von 4,4-disubstituierten 1,3-Thiazol-5(4H)-thionen mit Acetylenderivaten

1,4-Dithiafulvenes, Products of the Reaction of 4,4-Disubstituted 1,3-Thiazol-5(4H)-thiones and Acetylenic Compounds On heating in toluene, 4,4-disubstituted 1,3-thiazol-5(4H)-thiones 1 and acetylenecarboxylates or acetylenecarbonitriles 2 undergo a cyclosubstitution reaction to yield 2-methylidene-1,3-dithiol derivatives 3 (1,4-dithiafulvenes) and a nitrile. Further heating of 3a and 3b in the presence of excess 2a leads to the isomeric 2,3-dihydrothiophene-2-thiones 4a and 4b , respectively. The benzodithiafulvene 14 has been formed in a similar reaction from 1a and in situ generate benzyne.     

Synthese von Trifluoromethyl-substituierten Schwefel-Heterocyclen unter Verwendung von 3,3,3-Trifluorobrenztraubensäure-Derivaten

Synthesis of Trifluoromethyl-Substituted Sulfur Heterocycles Using 3,3,3-Trifluoropyruvic-Acid Derivatives The reaction of methyl 3,3,3-trifluoropyruvate ( 1 ) with 2,5-dihydro-1,3,4-thiadiazoles 4a, b in benzene at 45° yielded the corresponding methyl 5-(trifluoromethyl)-1,3-oxathiolane-5-carboxylates 5a, b (Scheme 1) via a regioselective 1,3-dipolar cycloaddition of an intermediate ‘thiocarbonyl ylide’ of type 3 . With methyl pyruvate, 4a reacted similarly to give 6 in good yield. Methyl 2-diazo-3,3,3-trifluoropropanoate ( 2 ) and thiobenzophenone ( 7a ) in toluene underwent a reaction at 50°; the only product detected in the reaction mixture was thiirane 8a (Scheme 2). With the less reactive thiocarbonyl compounds 9H-xanthene-9-thione ( 7b ) and 9H-thioxanthene-9-thione ( 7c ) as well as with 1,3-thiazole-5(4H)-thione 12 , diazo compound 2 reacted only in the presence of catalytic amounts of Rh₂(OAc)₄. In the cases of 7a and 7b , thiiranes 8b and 8c , respectively, were the sole products (Scheme 3). The crystal struture of 8c has been established by X-ray crystallography (Fig.). In the reaction with 12 , desulfurization of the primarily formed thiirane 14 gave the methyl 3,3,3-trifluoro-2-(4,5-dihydro-1,3-thiazol-5-ylidene)propanoates (E)-and (Z)- 15 (Scheme 4). A mechanism of the Rh-catalyzed reaction via a carbene addition to the thiocarbonyl S-atom is proposed in Scheme 5.     

Umsetzungen von 1,3-Thiazol-5(4H)-thionen mit Grignard- und Organolithium-Verbindungen: Carbophile und Thiophile Additionen

Reactions of 1,3-Thiazole-5(4H)-thiones with Grignard- and Organolithium Compounds: Carbophilic and Thiophilic Additions Organolithium compounds and 1,3-thiazole-5(4H)-thiones 9 reacted via thiophilic addition on the exocyclic S-atom. The intermediate anion E has been trapped by protonation to give 12 and by alkylation to yield 16 , respectively (Schemes 5 and 6). In competition with protonation of E , a fragmentation to benzonitrile and a dithioester 14 was observed (Scheme 5). In some cases, the alkylation of E led to the formation of dithioacetals 17 instead of 16 (Scheme 6). Methyl, ethyl, and isopropyl Grignard reagents and 9 in THF underwent again a thiophilic addition yielding 4,5-dihydro-1,3-thiazoles of type 12 (Scheme 3). In contrast to this result, MeMgI reacted with 9a in Et₂O via carbophilic addition to 11 . Again a carbophilic attack at C(5) of 9 was observed with allylmagnesium and 2-propynylmagnesium bromide, respectively, in Et₂O.     

Reaktion von Phenyldiazomethan mit 1,3-Thiazol-5(4H)-thionen: Basenkatalysierte Ring-Öffnung des Primäradduktes

Reaction of Phenyldiazomethane with 1,3-Thiazole-5(4H)-thiones: Base-Catalyzed Ring Opening of the Primary Adduct Reaction of 1,3-thiazole-5(4H)-thiones 1 and phenyldiazomethane ( 2a ) in toluene at room temperature yields the thiiranes trans- and cis-1,4-dithia-6-azaspiro[2.4]hept-5-enes (trans- and cis- 4 ; Scheme 2). With Ph₃P in THF at 70°, these thiiranes are transformed stereospecifically into (E)- and (Z)-5-benzylidene-4,5-dihydro-1,3-thiazoles 5 , respectively. In the presence of DBU, 1 and 2a react to give 1,3,4-thiadiazole derivatives 6 or 7 via base-catalyzed ring opening of the primary cycloadduct (Scheme 3). In the case of 2-(alkylthio)-substituted 1,3-thiazole-5(4H)-thiones 1c and 1d , this ring opening proceeds by elimination of the corresponding alkylthiolate, yielding isothiocyanate 7 . The structures of (Z)- 5c and 6b have been established by X-ray crystallography.     

Synthese von 4,4-disubstituierten 1,3-Thiazol-5(4H)-thionen

Synthesis of 4,4-Disubstituted 1,3-Thiazol-5(4H)-thiones An easy synthesis for the 1,3-thiazol-5(4H)-thiones 5 , a class of heterocycles which have hitherto only been available with difficulty, is described. Reaction of 3-amino-2H-azirines 25 with thiocarboxylic acids at 0° yields monothiodiamides of type 20 (Scheme 6) which, on treatment with Lawesson reagent at 100°, undergo thiation and cyclization to give 5 in good yield.     

Reactions of methyl 3,3,3-trifluoro-2-(pyridin-2-ylimino)-propanoates with mono- and difunctional nucleophiles

Reactions of methyl 3,3,3-trifluoro-2-(pyridin-2-ylimino)propanoates with such nucleophiles and 1,3-binucleophiles as methanol, p-toluidine, phenylhydrazine, diethyl phosphonate, 2-aminobut-2-enenitrile, benzamidine, and 4,5-dihydro-1,3-thiazol-2-amine led to the formation of various acyclic 2-substituted methyl 3,3,3-trifluoro-2-(pyridin-2-ylamino)propanoates and trifluoromethyl-containing heterocyclic N-substituted 2-aminopyridine derivatives: 4,5-dihydro-1H-pyrroles, 4,5-dihydro-1H-imidazol-5-ones, and 2,3-dihydro-6Himidazo[2,1-b][1,3]thiazol-5-ones.     

Halocyclization of 2-(2-{4-[allylamino(thioxo)methyl]piperazin-1-yl}ethyl)-1<Emphasis Type="Italic">H</Emphasis>-benzo[<Emphasis Type="Italic">de</Emphasis>]isoquinoline-1,3(2<Emphasis Type="Italic">H</Emphasis>)-dione

Cyclization of 2-(2-{4-[allylamino(thioxo)methyl]piperazin-1-yl}ethyl)-1H-benzo[de]isoquinoline-1,3(2H)-dione by the action of iodine, bromine, or sulfuryl chloride gave 2-(2-{4-[4,5-dihydro-5-(halomethyl)-thiazol-2-yl]piperazin-1-yl}ethyl)-1H-benzo[de]isoquinoline-1,3(2H)-dione hydrohalides which were converted into 2-{2-[4-(5-methylthiazol-2-yl)piperazin-1-yl]ethyl}-1H-benzo[de]isoquinoline-1,3(2H)-dione.     

Hetero-Diels-Alder-Reaktion mit 1,3-Thiazol-5(4H)-thionen

Hetro-Diels-Alder Reaction with 1,3-Thiazol-5(4H)-thiones On heating in toluene to 180° and on treatment with BF₃·Et₂O in CH₂Cl₂ room temperature, 1,3-dienes react with the C?S group of 1,3-thiazol-5(4H)-thiones 1 in a reversible Diels-Alder reaction to give spiro[4.5]-heterocycles of type 6. A 1:1 mixture of two regioisomeric cycloadducts is formed in the thermal reaction with 2-methylbuta-1,3-diene (isoprene, 5b ). In contrast, the formation of one regioisomer is strongly preferred in the BF₃-catalyzed reaction. Frontier-orbital control as well as steric factors seem to be responsible for the observed regioselectivity. BF₃-Catalyzed, cyclic 1,3-dienes and 1 also undergo a smooth Diels-Alder reaction. Whereas cyclohexa-1,3-diene ( 5c ) reacts with 1a and 1b to give a single isomer (presumably the ‘exo’-adduct), cyclopenta-1,3-diene ( 5d ) leads to a ca. 3:1 mixture of ‘exo’-and ‘endo’-isomer.     

Reaktion von 3-(Dimethylamino)-2H-azirinen mit 1,3-Thiazolidin-2-thion

Reaction of 3-(Dimethylamino)-2H-azirines with 1,3-Thiazolidine-2-thione Reaction of 3-(dimethylamino)-2H-azirines 1 and 1,3-thiazolidine-2-thione ( 6 ) in MeCN at room temperature leads to a mixture of perhydroimidazo[4,3-b]thiazole-5-thiones 7 and N-[1-(4,5-dihydro-1,3-thiazol-2-yl)alkyl]-N′,N′-dimethylthioureas 8 (Scheme 2), whereas, in i-PrOH at ca. 60°, 8 is the only product (Scheme 4). It has been shown that, in polar solvents or under Me₂NH catalysis, the primarily formed 7 isomerizes to 8 (Scheme 4). The hydrolysis of 7 and 8 leads to the same 2-thiohydantoine 9 (Scheme 3 and 5). The structure of 7a, 8c , and 9b has been established by X-ray crystallography (Chapt. 4). Reaction mechanisms for the formation and the hydrolysis of 7 and 8 are suggested.     

Synthesis of 7-iodo(arylsulfanyl)methyl-7,8-dihydro-[1,3]thiazolo[2,3-i]purinium pentaiodide (perchlorates) and their transformation into 4-amino-5-(1,3-thiazol-2-yl)imidazole derivatives

Intramolecular electrophilic cyclization of 6-allylsulfanylpurine by the action of iodine and arenesulfenyl chlorides gave 7-iodomethyl-7,8-dihydro[1,3]thiazolo[2,3-i]purin-6-ium pentaiodide and 7-arylsulfanylmethyl-7,8-dihydro[1,3]thiazolo[2,3-i]purin-6-ium perchlorates, respectively. 7-Iodomethyl-7,8-dihydro-[1,3]thiazolo[2,3-i]purin-6-ium iodide reacted with sodium and potassium alkoxides to produce alkyl N-[5-(4-methyl-1,3-thiazol-2-yl)-1H-imidazol-4-yl]formimidates, and its reaction with secondary cyclic amines afforded 5-(4-methyl-1,3-thiazol-2-yl)-N-[morpholin-4-yl(or piperidin-1-yl)methylidene]-1H-imidazol-4-amines. Successive treatment of 7-arylsulfanylmethyl-7,8-dihydro[1,3]thiazolo[2,3-i]purin-6-ium perchlorates with sodium acetate and morpholine led to the formation of 5-(4-arylsulfanylmethyl-4,5-dihydro-1,3-thiazol-2-yl)-N-(morpholin-4-ylmethylidene)-1H-imidazol-4-amines.