Studies on sulfinatodehalogenation: IV. The sulfinatodebromination of primary perfluoroalkyl bromides and perfluoroalkylene α, ω-dibromides

Using PTC or cosolvent, both perfluoroalkyl bromides such as Br (CF₂)₂O(CF₂)₂SO₂Na ( 1 ), Br(CF₂)₂OCF₂CO₂H ( 2 ), Cl(CF₂)₄Br ( 3 ), Cl(CF₂Br ( 4 ), n-C₆F₁₃Br ( 5 ), n-C₈F₁₇Br ( 6 ), H(CF₂)₈Br ( 7 ), α, ω-dibromides O(CF₂CF₂Br)₂ ( 8 ), Br(CF₂)₆Br ( 9 ) and Br(CF₂)₈Br ( 10 ) reacted readily with Na₂S₂O₄ in the presence of NaHCO₃ in aqueous solution to form the corresponding perfluoroalkane sulfinates NaO₂S(CF₂)₂O(CF₂)₂SO₂Na ( 11 ), NaO₂S(CF₂)₂OCF₂CO₂Na ( 12 ), Cl(CF₂)₄SO₂Na ( 13 ), Cl(CF₂)₂SO₂Na ( 14 ), n-C₃F₁₃SO₂Na ( 15 ), n-C₈F₁₇SO₂Na ( 16 ), H(CF₂)₈SO₂Na ( 17 ), α, ω-disulfinates O(CF₂CF₂SO₂Na)₂ ( 18 ), NaO₂S(CF₂)₄SO₂Na ( 19 ) and NaO₂S(CF₂)₈SO₂Na ( 20 ) in 66—97% yields. To this new and general reaction of perfluoroalkyl bromides, the name sulfinatodebromination is proposed.     

Studies on sulfinatodehalogenation: III. The sulfinatodeiodination of primary perfluoroalkyl iodides and α,ω-perfluoroalkylene diiodides by sodium dithionite

Using P. T. C. or cosolvents, both perfluoroalkyl iodides such as Cl(CF₂),_nI (n=2, 4, 6, 1a-1c), H(CF₂)₈I (1d), CF₃(CF₂)_nI (n=3, 5, 7, 1e-1g), and α. ω-perfluoroalkylene diiodides such as (ICF₂CF₂)₂O (4a), I (CF₂)_nI (n=6, 8, 10, 4b-4d) reacted smoothly with sodium dithionite in aqueous solution under mild conditions to give the corresponding perfluoroalkanesulfinates Cl(CF₂)_nSO₂Na (n=2, 4, 6, 2a-2c), H(CF₂)₈SO₂Na (2d), CF₃(CF₂)nSO₂Na (n=3, 5, 7, 2e-2g), α, ω-perfluoroalky-lenedisulfinates O (CF₂CF₂SO₂K)₂ (5a), and KO₂S(CF₂)_nSO₃K (n=6, 8, 10, 6b-6d) in moderate to high yields. These sulfinates were converted to the corresponding sulfonyl chlorides by reacting with chlorine in the usual way. Thus the discovery of the new reagent renders sulfinatodeiodination a practical method for the synthesis of perfluorosulfinic and perfluorosulfonic acids and their derivatives from the corresponding perfluoroalkyl iodides.     

Study on synthesis of lanthanide chelates of fluorochloroalkyl β-diketones useful as shift reagents

Several lanthanide chelates of the fluorochloroalkyl β-diketones Ln(CF₂ClCOCHCOR)₃ ·nH₂O were prepared (2, Ln=Eu; 2a, R=C(CH₃)₃, n=0; 2b, R=C₆F₅, n=0; 2c, R=CF₂Cl, n=2. 3, Ln=Pr; 3a, R=C (CH₃)₃, n=0; 3b, R=C₆F₅, n=l; 3c, R=CF₂Cl, n=2. 4, Ln=La, R=C₆H₅, n=0) and the NMR shift data of compounds 2 and 3 had been determined using alcohols, ether, ketones and amine as substrates. With alcohol, ether and ketone, compounds 2 induces shifts similar to that induced by Eu (fod)₃. However due to the high solubility of the chelates in non-polar organic solvents such as CHCl₃ and CCl₄ and the absence of ¹H signal from compounds 2b and 2c, their application as a series of new ¹H NMR shift reagents seems promising.     

Studies on fluoroalkylation and fluoroalkoxylation: 2. Perfluoroalkylation of aromatics with perfluoroalkyl iodides in the presence of copper

Perfluoroalkyl iodide R_fI [R_f = (CF₂)_nO(CF₂)₂SO₂F, n = 2, (a); n = 4, (b); (CF₂)₄Cl, (c)] reacted with substituted benzene C₆H₅Y (Y = alkyl, OCH₃, CF₃, F, Cl, Br, I) in the presence of copper in acetic anhydride to give the corresponding mixture of isomeric disubstituted benzene (R_fC₆H₄Y). The conversion and yield depend on both the amount of copper used and nature of substituent. The likely explanation is that the reaction may involve a free radical process. The perfluoroalkyl radical can be trapped by cyclohexene, isopropylbenzene and styrene. Using DMSO in place of acetic anhydride as a solvent the reaction takes a different course, it is believed that the reaction in DMSO proceeds through a perfluoroalkylcopper intermediate.     

Electron structure and reactivity of organofluorine compounds. 3. Mndo and ami calculations of the ground state of perfluoroalkyl chlorides,bromides, and iodides

The semiempirical quantum chemical MNDO and AMI methods were used to determine the equilibrium geometries and electron properties of molecules of perfluoroalkyl halides (R_FX): CF₃X, CF₃CF₂X, (CF₃)₂CFX, (CF₃)₃CX for X=Cl, Br, and I. It was determined that the effective charge on the Cl atom in R_FCl is negative, positive on the I atom in R_FI, and depends on R_F for the Br atom in R_FBr. The CF₃ group can act as either an electron acceptor or donor in various perfluoroalkyl halides. The strongest C–I bond in the perfluoroalkyl halides occurs with a tertiary RF group.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 5, pp. 1059–1063, May, 1990.     

Polymerization of ethylene with nickel α-diimine catalysts

Several nickel α-diimine compounds of the general formula (ArNC(R) C(R)NAr)NiX₂ (Ar = 2,6-alkyl substituted Ph, R = H or CH₃, X = Br or CH³) were tested in ethylene polymerization after activation with different co-catalysts, such as methylaluminoxane, Al(C₂H₅)₂Cl or other aluminium alkyls, and ionizing reagents like B(C₆F₅)₃, [CPh₃][B(C₆F₅)₄] or HBF₄. The performances of the different catalytic systems were compared with reference to polymer productivity and structure. The degree of branching of the obtained polyethylenes was shown to depend not only on the ligand environment at the Ni centre but also on the type of co-catalyst.     

Studies on sulfinatodehalogenation. XX. Sodium dithionite-initiated addition of per- and polyfluoroalkyl iodides to cyclic enol ethers and chemical conversions of the products

Per- and polyfluoroalkyl iodides [R_FI, R_F=Cl(CF₂)₄, 1a ; Cl(CF₂)₆, 1b ; Cl(CF₂)₈, 1c ; n-C₆F₁₃, 1d ; n-C₈F₁₇, 1e ] reacted with cyclic enol ethers such as 2,3-dihydrofuran (2) and 3,4-dihydro-2H-pyran (3) in aqueous acetonitrile in the presence of sodium dithionite and sodium bicarbonate at room temperature (10–15°C) to give the corresponding 2-(F-alkyl) hemiacetals in high yields. The adducts were oxidized with Ce(NH₄)₂(NO₃)₆ in acetonitrile or reduced with LiAlH₄ in ether to form the corresponding 2-(F-alkyl)lactones or diols respectively in good yields. In the presence of p-toluenesulfonic acid, the adducts were refluxed in benzene and CH₃CN to produce the corresponding 2,3-dihydro-4-(F-alkyl) furan and 3,4-dihydro-5-(F-alkyl)-2H-pyran. This is a new and effective method for preparing these useful organofluorine compounds.     

α,ω-Bis(4-substituted-3-quinolinylthio)alkanes from reactions of thioquinanthrene with alkoxides

The reaction of thioquinanthrene 1 with sodium alkoxides and α,ω-dihaloalkanes leads to the formation of α,ω-bis[4-(4-methoxy-3-quinolinylthio)-3-quinolinylthio]alkanes 4 . The yield depends on the nature of α,ω-dihalo-alkanes. The effect of α,ω-dihaloalkanes of the following types: XCH₂X (X = Cl,Br,I), X(CH₂)₂X (X = Cl,Br,I), Br(CH₂)₃Br and Br(CH₂)₆Br were studied. The preparation of 4-alkoxy-3′-(ω-bromoalkylthio)-3,4′-diquinolinyl sulfide 3 and their transformation to α,ω-bis(4-alkoxy-3-quinolinylthio)alkanes 6 were studied as well.     

Über die oxidative Fluorierung von (CF3)(R) (R = CF3, Cl) und die Kristallstruktur von (CF3)(Cl)F+ AsF6−

Oxidative Fluorination of (CF₃)(R) (R = CF₃, Cl) and the Crystal Structure of (CF₃)(Cl) F⁺ AsF₆^? Oxidative fluorination of (CF₃)(R) (R = CF₃, Cl) with XeF⁺MF₆^? (M = As, Sb) in anhydrous HF results in formation of monofluorsulfonium hexafluorometalates. The salts are characterized by vibrational, NMR, and mass spectra. (CF₃)(Cl)F⁺ AsF₆^? crystallizes in the monoclinic space group P2₁/c with a = 9.955(10) Å, b = 11.050(5) Å, c = 12.733(15) Å, β = 97.77(5)°, and Z = 4.     

Mono and Bisphosphonates from Perfluoro Olefins and Polyfunctional Fluoro Ketones. Syntheses,Molecular Structure and Derivatives

Perfluoroalkenyl phosphonates were formed along with Me₃SiF using CF₃CF=CF₂, CF₃CH=CF₂, F₅SCF=CF₂ or F₅SCH=CF₂ and silylated phosphites, (R¹O)₂POSiMe₃ (R¹=Et, SiMe₃). This straightforward method could be extended to perfluorobutadienes CF₂=C(R^F)C(R^F)=CF₂ (R^F F=F, CF₃). The formation of CF₃C(=O)P(=O)(OSiMe₃)₂ and further reactions to yield bisphosphonates will be described. Acetylphosphonates, R²C(=O)P(=O)(OSiMe₃)₂ (R²=CH₃, CF₃) reacted with the ketimine, CH₃C(=NiPr)Ph to give α-hydroxy-γ-imino phosphonates. Trifluoroacetylphenol and 2,6-bis(trifluoracetyl)-4-methyl-phenol have been proven to be versatile precursors for α-and γ-hydroxy phosphonates. Intermediates in these reactions were found to be cyclic λ⁵σ⁵P species.     

Strukturen von neuen Bis(pentafluorophenyl)halogenomercuraten [{Hg(C6F5)2}3(μ‐X)]— (X = Cl,Br, I)

Structures of New Bis(pentafluorophenyl)halogeno Mercurates [{Hg(C₆F₅)₂}₃(μ‐X)]^— (X = Cl, Br, I) From the reactions of [PNP]Cl or [PPh₄]Y (Y = Br, I) with Hg(C₆F₅)₂ crystals of the composition [Cat][{Hg(C₆F₅)₂}₃X] (Cat = PNP, X = Cl ( 1 ); Cat = PPh₄, X = Br ( 2 ), I ( 3 )) are formed. 1 crystallizes in the triclinic space group P1¯, 2 and 3 crystallize isotypically in the monoclinic space group C2/c. In the crystals the halide anions are surrounded by three Hg(C₆F₅)₂ molecules. The reaction of [PPh₄]Br with Hg(C₆F₅)₂ under slightly changed conditions gives the compound [PPh₄]₂[{Hg(C₆F₅)₂}₃(μ‐Br)][{Hg(C₆F₅)₂}₂(μ‐Br)] ( 4 ).     

Quasi‐living copolymerization of ethylene with 1‐hexene by heteroligated (salicylaldiminato β‐enaminoketonato) titanium complexes

A series of heteroligated (salicylaldiminato)(β‐enaminoketonato)titanium complexes [3‐Bu^t‐2‐OC₆H₃CH = N(C₆F₅)] [PhN = C(R₁)CHC(R₂)O]TiCl₂ [ 3a : R₁ = CF₃, R₂ = ^tBu; 3b : R₁ = Me, R₂ = CF₃; 3c : R₁ = CF₃, R₂ = Ph; 3d : R₁ = CF₃, R₂ = C₆H₄Ph(p ); 3e : R₁ = CF₃, R₂ = C₆H₄Ph(o ); 3f : R = CF₃, R₂ = C₆H₄Cl(p ); 3g : R₁ = CF₃; R₂ = C₆H₃Cl₂(2,5); 3h : R₁ = CF₃, R₂ = C₆H₄Me(p )] were investigated as catalysts for ethylene (co)polymerization. In the presence of modified methylaluminoxane as a cocatalyst, these complexes showed activities about 50%–1000% and 10%–100% higher than their corresponding bis(β‐enaminoketonato) titanium complexes for ethylene homo‐ and ethylene/1‐hexene copolymerization, respectively. They produced high or moderate molecular weight copolymers with 1‐hexene incorporations about 10%–200% higher than their homoligated counterpart pentafluorinated FI‐Ti complex. Among them, complex 3b displayed the highest activity [2.06 × 10⁶ g/mol_Ti?h], affording copolymers with the highest 1‐hexene incorporations of 34.8 mol% under mild conditions. Moreover, catalyst 3h with electron‐donating group not only exhibited much higher 1‐hexene incorporations (9.0 mol% vs. 3.2 mol%) than pentafluorinated FI‐Ti complex but also generated copolymers with similar narrow molecular weight distributions (M _w/M _n = 1.20–1.26). When the 1‐hexene concentration in the feed was about 2.0 mol/L and the hexene incorporation of resultant polymer was about 9.0 mol%, a quasi‐living copolymerization behavior could be achieved. ¹H and ¹³C NMR spectroscopic analysis of their resulting copolymers demonstrated the possible copolymerization mechanism, which was related with the chain initiation, monomer insertion style, chain transfer and termination during the polymerization process. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 2787–2797     

Studies on sulfinatodehalogenation: XVII. The sulfinatodehalogenation of primary perfluoroalkyl iodides and bromides by Rongalite

Using acetonitrile or DMF as cosolvent, both perfluoroalkyl iodides such as Cl(CF₂)_nI (n = 4,6,8, la—lc ), CF₃ (CF₂)_n I (n = 5,6,7, ld—lf ), I (CF₂)_n O (CF₂) SO₃ Na(n = 2,4,6, lg—li ) and perfluoroalkyl bromides such as Cl (CF₂)_n Br (n = 4,6, 3a—3b ) and C₇F₁₅ Br (3e) reacted with Rongalite in aqueous solution to give the corresponding sulfinates Cl (CF₂)_n SO₂ Na (n = 4,6,8, 2a—2c ), CF₃-(CF₂)_nSO₂Na (n = 5,6,7, 2d—2f ) and NaO₂S(CF₂)_nO(CF₂)₂SO₃Na (n = 2,4,6, 2g—2i ) in moderate yields. 1 H-perfluoroalkanes were formed as the main products when other solvents such as ethanol. iso-propanol, 1,4-dioxane and morpholine were used.     

Chiral Fluorinated α‐Sulfonyl Carbanions: Enantioselective Synthesis and Electrophilic Capture,Racemization Dynamics,and Structure

Enantiomerically pure triflones R¹CH(R²)SO₂CF₃ have been synthesized starting from the corresponding chiral alcohols via thiols and trifluoromethylsulfanes. Key steps of the syntheses of the sulfanes are the photochemical trifluoromethylation of the thiols with CF₃Hal (Hal=halide) or substitution of alkoxyphosphinediamines with CF₃SSCF₃. The deprotonation of RCH(Me)SO₂CF₃ (R=CH₂Ph, iHex) with nBuLi with the formation of salts [RC(Me)? SO₂CF₃]Li and their electrophilic capture both occurred with high enantioselectivities. Displacement of the SO₂CF₃ group of (S)‐MeOCH₂C(Me)(CH₂Ph)SO₂CF₃ (95 % ee) by an ethyl group through the reaction with AlEt₃ gave alkane MeOCH₂C(Me)(CH₂Ph)Et of 96 % ee. Racemization of salts [R¹C(R²)SO₂CF₃]Li follows first‐order kinetics and is mainly an enthalpic process with small negative activation entropy as revealed by polarimetry and dynamic NMR (DNMR) spectroscopy. This is in accordance with a C_α? S bond rotation as the rate‐determining step. Lithium α‐(S)‐trifluoromethyl‐ and α‐(S)‐nonafluorobutylsulfonyl carbanion salts have a much higher racemization barrier than the corresponding α‐(S)‐tert‐butylsulfonyl carbanion salts. Whereas [PhCH₂C(Me)SO₂tBu]Li/DMPU (DMPU = dimethylpropylurea) has a half‐life of racemization at ?105 °C of 2.4 h, that of [PhCH₂C(Me)SO₂CF₃]Li at ?78 °C is 30 d. DNMR spectroscopy of amides (PhCH₂)₂NSO₂CF₃ and (PhCH₂)N(Ph)SO₂CF₃ gave N? S rotational barriers that seem to be distinctly higher than those of nonfluorinated sulfonamides. NMR spectroscopy of [PhCH₂C(Ph)SO₂R]M (M=Li, K, NBu₄; R=CF₃, tBu) shows for both salts a confinement of the negative charge mainly to the C_α atom and a significant benzylic stabilization that is weaker in the trifluoromethylsulfonyl carbanion. According to crystal structure analyses, the carbanions of salts {[PhCH₂C(Ph)SO₂CF₃]Li? L }₂ ( L =2 THF, tetramethylethylenediamine (TMEDA)) and [PhCH₂C(Ph)SO₂CF₃]NBu₄ have the typical chiral C_α? S conformation of α‐sulfonyl carbanions, planar C_α atoms, and short C_α? S bonds. Ab initio calculations of [MeC(Ph)SO₂tBu]^? and [MeC(Ph)SO₂CF₃]^? showed for the fluorinated carbanion stronger n_C→σ* and n_O→σ* interactions and a weaker benzylic stabilization. According to natural bond orbital (NBO) calculations of [R¹C(R²)SO₂R]^? (R=tBu, CF₃) the n_C→σ*_{S? R} interaction is much stronger for R=CF₃. Ab initio calculations gave for [MeC(Ph)SO₂tBu]Li ? 2 Me₂O an O,Li,C_α contact ion pair (CIP) and for [MeC(Ph)SO₂CF₃]Li ? 2 Me₂O an O,Li,O CIP. According to cryoscopy, [PhCH₂C(Ph)SO₂CF₃]Li, [iHexC(Me)SO₂CF₃]Li, and [PhCH₂C(Ph)SO₂CF₃]NBu₄ predominantly form monomers in tetrahydrofuran (THF) at ?108 °C. The NMR spectroscopic data of salts [R¹(R²)SO₂R³]Li (R³=tBu, CF₃) indicate that the dominating monomeric CIPs are devoid of C_α? Li bonds.     

Syntheses and Properties of Tetrakis(pentafluorophenyl)tellurium,Te(C6F5)4, and Related Compounds — Single Crystal Structures of Tris(pentafluorophenyl)tellurium Bromide,Te(C6F5)3Br,Tris(pentafluorophenyl)tellurium Trifluoromethanesulfonate, [Te(C6F5)3][OSO2CF3], and Bis(pentafluorophenyl)tellurium Oxide,Te(C6F5)2O

Te(C₆F₅)₄ was prepared from the reactions of TeCl₄ or Te(C₆F₅)₂Cl₂ with Grignard reagents or AgC₆F₅ in moderate to good yields. Substitution reactions with Me₃SiX (X = Cl, Br, OSO₂CF₃), with equimolar amounts of Br₂, with AgNO₃ and with H[BF₄] or BF₃·OEt₂ yielded the Te(C₆F₅)₃X derivatives (X = Cl, Br, OSO₂CF₃, NO₃, BF₄). Oxidation reactions of Cd, Hg, and Pd⁰ complexes led to Te(C₆F₅)₂ and the corresponding bis(pentafluorophenyl) derivatives M(C₆F₅)₂ (M = Cd, Hg, Pd) and with InBr to In(C₆F₅)₂Br. From very slow hydrolysis of Te(C₆F₅)₄ the oxide Te(C₆F₅)₂O was prepared. The thermal decomposition, the NMR and mass spectra of the partially new compounds are discussed. The crystal structures of Te(C₆F₅)₃Br (monoclinic, P2₁/a, Z = 4), [Te(C₆F₅)₃][OSO₂CF₃] (monoclinic, P2₁/n, Z = 16) and [Te(C₆F₅)₂O]₂ (triclinic, P1¯, Z = 2) were determined.     

Photoelektronen-Spektren und Moleküleigenschaften. 132 [1, 2]. Trifluormethylsulfan und Derivate F3CSX (X  CF3, Cl,Br, I)

Photoelectron Spectra and Molecular Properties. 132. Trifluoromethylsulfane and Derivatives F₃CSX (X ? CF₃, Cl, Br, I) The He(I) photoelectron spectra of trifluoromethylsulfane F₃CSH and its derivatives F₃CSX (X ? CF₃, Cl, Br, I) are assigned by Koopmans' correlations, IE = ?ε, with MNDO eigenvalues, by radical cation state comparison and based on resolved vibrational fine structures, which can' be discussed by MNDO FORCE calculations. The spin/orbit splitting in F₃CSI can be approximated by additional ITEREX-85 calculations. Gasphase thermolysis of the trifluoromethylhalogensulfanes F₃CSX at 10^?4 mbar yields decomposition temperatures, which decrease from X ? Cl to I, and as fragmentation products of presumably radical intermediates, in addition to the respective halogens X₂ and F₂C?S, also F₃CX as well as S₂ and CS₂ (X ?Cl, Br) are PE spectroscopically detected.     

The syntheses of fluorinated alkanesulfonamides and poly-(fluorinated alkanesulfonamides)

In order to synthesize poly-(fluorinated alkanesulfonamides) a series of model experiments were carried out: (1) reactions of fluorinated alkanesulfonyl fluorides with amines, (2) reactions of fluorinated alkanesulfonyl chloride with amines and (3) reactions of sodium salts of fluorinated alkanesulfonamides with alkyl iodides of fluorinated alkanesulfonic acid esters. Seventeen new fluorinated alkanesulfonamides were prepared in good yields, namely: R_FO(CF₂)₂SO₂NR¹R² (1a-h), R¹R²NSO₂R_FSO₂NR¹R² (2a-h) and [Cl (CF₂)₄O(CF₂)₂SO₂NH(CH₂)₃]₂ (3). Reaction of R_FSO₂NH₂ with equivalent amount of NaOCH₃ and methyl iodide was shown to give both the N-mono- and N,N-di-substituted amides. Consequently the N-monosubstituted alkanesulfonamides were chosen as monomers for syntheses of the poly-(fluorinated alkanesulfonamides) and two new polymers were synthesized. The effect of the condition of the polycondensation on M?_n of the polymers were discussed and elemental composition, ¹⁹F NMR, IR, M?_n, Tg, tensile strength, thermal and chemical stabilities of the polymers were measured. Several new perfluoroalkanesulfonyl chlorides CISO₂R_FSO₂Cl (4a-c) and fluorinated alkanesulfonic acid esters (6a-d) were synthesized. However, reaction of CFCl₂CF₂O(CF₂)₂SO₂F with AlCl₃ was found to give Cl₃CCF₂O(CF₂)₂SO₂F (5) instead of the expected sulfonyl chloride.     

1,1,1,4,5,5,5-Heptafluoro-4-(trifluoromethyl)-2,3-pentanedione,a potent reagent for the synthesis of cyclic λ5σ5 phosphoranes

1,1,1,4,5,5,5-Heptafluoro-4-(trifluoromethyl)-2,3-pentanedione reacted with λ³σ³-phosphorus compounds, PR¹R²R³ (R¹ = CF₃, R² = R³ = Me, iPr, NEt₂; R¹ = NCO, R² = R³ = OMe, OEt, R²−R³ = OCH₂CH₂O, OCMe₂CMe₂O; R¹ = OSiMe₃, R² = R³ = OEt; R¹ = NEt₂, R² = R³ = OCH₂CF₃; R¹ = R² = Et₂N, R³ = OCH₂CF₃, OCH(CF₃)₂, OCH₂Ph, OC₆F₅) to give new 1,3,2λ⁵σ⁵-dioxaphospholenes. The first λ⁵σ⁵ phosphoranes with an OCN group bonded to phosphorus were obtained. © 1998 John Wiley & Sons, Inc. Heteroatom Chem 9:109–113, 1998     

Unexpected formation of N-fluoroalkaneacyl anilides from the reactions of fluoroalkanesulfonyl azides with nitrobenzene and its derivatives

The thermal reactions of fluoroalkanesulfonyl azides R_fCF₂SO₂N₃1 with nitrobenzene and its derivatives XC₆H₄NO₂ (X=H, F, Cl, CF₃) gave the unexpected N-fluoroalkaneacyl anilides R_fCONHC₆H₄X (X=H, Cl, F, CF₃) in addition to fluoroalkanesulfonyl amides R_fCF₂SO₂NH₂. Under the same reaction conditions, however, nitrobenzene containing an electron-donating group RC₆H₄NO₂ (R=CH₃, OCH₃) reacted with 1 affording the corresponding N-fluoroalkanesulfonyl anilides R_fCF₂SO₂NHC₆H₃(NO₂)R. Other electron-poor benzene derivatives, such as benzaldehyde, benzoate, and acetophenone C₆H₅Y(Y=CHO, COCH₃, CO₂CH₃) all gave the meta-substituted N-fluoroalkanesulfonyl anilides R_fCF₂SO₂NHC₆H₄Y.     

Über die Umsetzung von NN-Dihalogenperfluoralkanaminen mit Schwefel und Schwefelderivaten

Reactions of NN-Dihaloperfluoroalkaneamines with Sulfur and Sulfur Derivatives Reactions of NN-Dihaloperfluoroalkaneamines R_fNX₂ (R_f = CF₃, C₂F₅; X = Cl, Br) with S₈, S₄N₄ and A = SX₂ (A = R_fN, O) are described. The products isolated are: Sulfurdihalideimides R_fNSX₂ (R_f = CF₃, C₂F₅; X = Cl, Br), Sulfurdiimides R_fNSNR_f and Bis(sulfurdiimido)sulfides (R_fNSN)₂S(R_f = CF₃, C₂F₅). Thionylimides R_fNSO were not obtained in preparative quantities.