用于烯烃与(甲基)丙烯酸甲酯配位共聚的非茂后过渡催化剂研究进展

非茂后过渡金属催化剂因其良好的耐杂原子能力在催化烯烃和极性单体共聚合方面表现出很好的特性,并具有潜在的工业应用前景。本文综述了近年来Fe、Co、Ni、Pd、Cu等非茂后过渡金属催化剂催化乙烯、丙烯与(甲基)丙烯酸甲酯配位共聚的研究状况,重点介绍了Fe、Co、Ni、Pd为中心金属的非茂后过渡金属催化剂的结构对乙烯、丙烯与(甲基)丙烯酸甲酯配位共聚的催化活性和所得共聚物分子量的影响,并强调了设计新型配体是开发新型非茂后过渡金属催化剂的一种重要途径。     

Nafion-甲基紫精修饰电极抗坏血酸氧化酶生物传感器的研究

本文用Nafion-甲基紫精修饰电极为基底,以牛血清白蛋白和戊二醛为交联剂,将抗坏血酸氧化酶固定在电极上,制成修饰电极抗坏血酸氧化酶生物传感器。用这种生物传感器测定人体血清中抗坏血酸,线性范围在7.5×10~(-4)～7.5×10~(-7)mol/L之间,响应时间为5s,检测下限为2.5×10~(-7)mol/L。该传感器具有选择性好、灵敏度高和响应时间短等特点。     

Ultra Deep Hydrodesulfurization of Gas Oils Over Sulfide and/or Noble Metal Catalysts

Deep hydrodesulfurization (HDS) of sterically hindered sulfur compounds in gas oils will require enhanced hydrogenation activity to hydrogenate the aromatic rings of the sulfur compounds. Although H₂S is known to inhibit the direct HDS route for most of the sulfided catalysts, its promotion to the hydrogenation and subsequent HDS was newly observed for unsupported MoS₂. This promotion suggests that ultra deep HDS over sulfide catalysts can be achieved along with high metal loading, minimal support-metal interactions and optimal dependence on the Ni species. On the other hand, the strong hydrogenation activity of sulfur-tolerant noble metal catalysts suggests that ultra deep HDS as well as deep aromatics saturation can be achieved. This paper discusses recent catalytic approaches for ultra deep HDS using conventional sulfide catalysts and/or noble metal catalysts, such as the newly developed Pd-Pt/Yb-USY zeolite catalyst.     

Nafion—MV修饰电极丙酮酸氧化酶生物传感器测定GPT的研究

用Nafion-甲基紫精修饰电极为基底,以牛血清白蛋白戊二醛为交联剂,将丙铜酸氧化酶固定在电极上,制成丙酮酸氧化酶生物传感器.用这种生物传感器测定人体血清中谷丙转氨酶(GPT)的活性,共存的尿酸、抗坏血酸等电活性物质不干扰测定.测定GPT的活性范围为0～110U/L,响应时间为50s.该传感器具有灵敏度高、抗干扰能力强和响应快等特点.     

Halocadmium Clusters with Different Linkage Modes Templated by Methyl Viologen: Structure,Photoluminescence, and Thermochromism

A new halocadmium/methyl viologen hybrid (MV)₄(Cd₂I₆)(Cd₂I₇)₂ (1) (MV²⁺ = methyl viologen) has been structurally determined. In 1, two kinds of dimeric halocadmium clusters constructed from edge/vertex-sharing CdI₄ tetrahedra respectively, i.e., Cd₂I₆ ^2? and Cd₂I₇ ^? dimmers were observed, which were templated by methyl viologen cation (MV²⁺). A highly interesting feature of 1 is the presence of mixed type dimeric halocadmium clusters in one crystal lattice templated by one kind of cation. 1 displays photoluminescences, and its thermochromism behavior is observed, whose mechanism was verified by theoretical calculations.     

过渡金属磷化物的制备及电催化析氢性能提升策略

氢能是一种绿色、 高效的二次能源, 在廉价的非贵金属催化剂的辅助下, 电解水制氢以其低成本和高效率受到广泛关注. 过渡金属磷化物因其独特近似球形三角棱柱单元结构能够暴露出更多配位不饱和表面原子, 因此在电解水制氢中表现出优异的催化活性和强耐腐蚀性. 本文综述了过渡金属磷化物的制备方法和在电催化析氢中的应用和性能的改善策略. 最后讨论了过渡金属磷化物催化剂存在的一些亟待解决的问题, 并展望了其未来的发展方向.     

Synthesis of Diazacrown Ethers with Chromophores and Their Photoinduced Charge‐Separation with Methyl Viologen

Two 4,13‐diaza‐18‐crown‐6 ethers with either two pyrenyl or two carbazolyl groups were synthesized. The two crown ethers can form complexes with methyl viologen in methanol solution. Photoirradiation of the complexes resulted in the electron transfer from the excited states of the chromophores to methyl viologen as demonstrated by the quenching of the chromophore fluorescence and the detection of the absorption spectrum of the generated viologen radical cation. The back electron transfer in these systems was inhibited by the electrostatic repulsion between the positively charged viologen radical cation and the generated chromophore radical cation. Long‐lived charge separation states (up to tens of min) were observed.     

Ni,Pd／Al2O3对丙酮加氢一步合成甲基异丁基酮性能比较

研究了Ａｌ２Ｏ３负载Ｎｉ、Ｐｄ催化剂上丙酮加氢一步合成甲基异丁基酮的反应活性。考察了不同Ｎｉ含量和不同Ｐｄ含量对活性的影响。结果表明，在载体Ａｌ２Ｏ３中加入不同含量的ＳｉＯ２后，会改善载体的性能，Ｎｉ／Ａｌ２Ｏ３催化剂中添加稀土元素Ｌａ或Ｃｅ后可改善催化剂的稳定性。     

负载型金属氧化物在煤制备氢气中的应用及表征

1引言 煤热解产生的富氢气体经过富集和纯化,得到的氢气既可作为氢燃料电池或航空航天发动机的燃料,也可以作为化工原料,还可用于改善其它气体燃料的燃烧性能等,用途广泛.所以,用热解煤的方法生产的洁净或改质的燃料,既能减少燃煤造成的环境污染,又能充分利用煤中所含的较高经济价值的化合物,具有保护环境、节能和合理利用煤炭资源的广泛意义.目前,对于煤热解制备氢气相应的催化剂还没有系统的研究.本实验以γ-Al2O3载体负载系列氧化物为催化剂,对煤热解制备氢气反应进行研究,比较了不同负载型氧化物催化剂对煤热解产生氢气的催化反应活性的差异.     

Ethoxycarbonylmethyl Viologen Induced Metal Halide-based Hybrids: Structures,Photoluminescence and Photocurrent Response Behavior

Two new ethoxycarbonylmethyl viologen induced metal halide-based hybrids,(Ae V)_2(Bi_4I_(16))(DMF)_2(1)and(Ae V)(CoCl_4)(2)(AeV~(2+)=N,N?-bis(ethoxycarbonylmethyl)-4,4?-bipyridinium)have been synthesized and structurally determined by X-ray diffraction method.Under the direction of a new template AeV~(2+),the(Bi_4I_(16))~(4-)tetramer constructed from four edge-sharing BiI_6octahedra(for 1)and(CoCl_4)~(2-)mono-nuclear(for 2)were obtained.Furthermore,C–H···O and C–H···X(X=I,Cl)hydrogen bonds contribute to the extension of structures from 0-D to 1-D chains.Their energy band gaps of 2.18 and 2.41 eV indicate their semiconductor properties,and the photoluminescence was detected on 1.Interestingly,2 exhibits good photocurrent response behavior.Electronic structure analysis was executed to correlate the structure/property.     

Partial Oxidation of Butane to Syngas over Nickel Supported Catalysts Modified by Alkali Metal Oxide and Rare-Earth Metal Oxide

There are abundant supplies of mixture gases containing CH4, C2H6, C3H8 and C4H10, etc. from FCC (Fluidized Catalytic Cracking) tail gas, refinery gas, etc. Commonly, the mixture gases are primarily combusted to carbon dioxide because the complete separation of CH4, C2H6, C3H8 and C4H10, respectively, from the mixture gases may not be economical. Provided that syngas (CO+H2) could be produced from the mixture gases over nickel supported catalysts with high selectivity and conversion,…     

Structured Catalysts Prepared by Electroless Plating Technique onto a Metal Substrate, for a Wall-Type Hydrogen Production System

This article reviews our works on the structured catalysts for a wall-type hydrogen production system including methanol steam reforming (MSR), CO shift reaction (CO SR) and methanol decomposition (MD). The structured catalysts were copper-based, palladium-based and nickel-based catalysts. Such a series of structured catalysts were prepared by the electroless plating technique that is a novel method for preparing a structured type catalyst onto a metal-substrate. The copper-based catalyst exhibited high performance for MSR and CO SR, the palladium-based catalyst high for MSR, and the nickel-based catalyst high for MD. The catalytic properties of these catalysts were affected by the difference of the plating condition and the pretreatment condition prior to the reaction. In the copper-based catalyst, the reforming and shift activities were enhanced by the oxidation treatment. One of the factors of such activity enhancement by the oxidation was thought to be in close proximity existence of copper and zinc atoms. A lot of monodentate-type formate species having high reactivity was formed on the oxidized catalyst, which would be correlated to the activity enhancement. In the palladium-based catalyst, the reforming activity was improved by the continuous reduction treatment followed by the oxidation. Such continuous pretreatment formed the PdZn alloy species thought to be a reforming site in the surface layer. The decomposition performance of the nickel-based catalyst depended on the ratio of the crystallite size of nickel particles to that of aluminum particles. The electronic influence of zinc and phosphorous components incorporated in the plated layer contributed to the improvement of the selectivity of product.     

稀土改性甲烷分解制氢Ni-Al催化剂制备及表征

采用化学湿法共沉淀制备了Cu和不同稀土(RE=La,Ce,Nd,Y)改性的甲烷分解制氢Ni-Al催化剂,并对催化剂进行了BET,XRD,TPR,SEM,TEM等技术表征和催化制氢性能评价.研究结果表明,稀土是比铜更理想的改性剂,稀土改性对催化剂具有良好热稳定作用,并提高催化制氢高温活性,La改性效果最佳;稀土改性催化剂具有较高的制氢稳定性能,700℃下连续制氢12 h后未出现失活.稀土改性可促进纳米碳管形成,大幅改善纳米碳形貌,并对固态碳有较强的抑制作用.     

Oxidation of Alkenes and Sulfides with Transition Metal Catalysts

Alkenes and sulfides were oxidized with transition-metal catalysts. The oxidant sources include molecular dioxygen, air and iodosylbenzene. The metal ions Mn(III), Fe(III), Co(II) and Ni(II) were used. The Catalysts 1-18 of 1,3-dioxo-, β-ketoimine- or salen-types were prepared and their efficacy was examined. 1,2-Dihydronaphthalene is most efficiently epoxidized with O₂/Me₂CHCHO or PhIO in the presence of Mn(III)-salen catalysts. The Ni(II)-, Co(II)- and Fe(III)-catalysts of either β-ketoimine- or salen-types are useful for epoxidation of styrene, (E)-stilbene and (E)-benzalacetone in the O₂/Me₂HCHO system; these epoxidations are stereospecific without formation of corresponding diastereomeric epoxides. Oxidation of methyl p-tolyl sulfide with O₂/Me₂CHCHO is facilitated by the 1,3-dioxo-catalyst Co(II)-1. Monooxidation is achieved with Me₂CHCHO in equimolar proportions to give the corresponding sulfoxide, whereas overoxidation is realized with excess Me₂CHCHO to give the sulfone. These epoxidation and sulfide oxidations all occur at 25 °C and are complete in less than a day.     

Interaction of Methyl Cysteine and Nitrilotriacetate with Transition Metal Ions

In the present work, sulfur-containing amino acid methyl cysteine was studied from the point of view of their coordinating ability with two metal ions, viz. copper(II) and cobalt(II). Solution equilibria of binary (Cu(II)/Co(II)–methyl cysteine and Cu(II)/Co(II)–nitrilotriacetate (NTA)) complex systems are investigated by paper ionophoresis at 35°C, ionic strength I= 0.1 mol/l. In addition to binary complexes, ternary complexes involving nitrilotriacetate and methyl cysteine were also studied. For studying mixed-ligand complexes, the pH of background electrolyte is brought to 8.5 (this pH value is purposely chosen because amino acid and NTA form very stable complexes much ahead of this pH). The stability constants of complexes (Cu(II)–NTA–methyl cysteine and Co(II)–NTA–methyl cysteine) were found to be 4.48 ± 0.07 and 3.55 ± 0.04 (logKvalues), respectively.     

Acidity Control of Mixed Al2O3-MgO Catalysts Modified with Fluorine or Sodium Compounds

Mixed Al₂O₃-MgO catalysts were prepared and characterized. The catalyst acidity can be controlled by varying the calcination temperature and by impregnation with fluorine or sodium compounds. In the reaction of 2-propanol, the dehydration rate constant increases with the calcination temperature and the amount of impregnated fluorine, whereas reverse results occur with an increase of impregnated sodium compound.     

Carbynehydridoruthenium Complexes as Catalysts for the Selective,Ring-Opening Metathesis of Cyclopentene with Methyl Acrylate

The first members of a homologous series of long-chain, multiply unsaturated esters were obtained upon selective ring-opening metathesis of cyclopentene with methyl acrylate [Eq. (a)]. The catalysts are cationic carbynehydridoruthenium complexes (e.g. L=OEt₂), which were prepared for the first time by protonation of hydridovinylideneruthenium compounds in the presence of L.