Adsorption of organic molecules on rutile TiO2 and anatase TiO2 single crystal surfaces

The interaction of organic molecules with titanium dioxide surfaces has been the subject of many studies over the last few decades. Numerous surface science techniques have been utilised to understand the often complex nature of these systems. The reasons for studying these systems are hugely diverse given that titanium dioxide has many technological and medical applications. Although surface science experiments investigating the adsorption of organic molecules on titanium dioxide surfaces is not a new area of research, the field continues to change and evolve as new potential applications are discovered and new techniques to study the systems are developed. This tutorial review aims to update previous reviews on the subject. It describes experimental and theoretical work on the adsorption of carboxylic acids, dye molecules, amino acids, alcohols, catechols and nitrogen containing compounds on single crystal TiO(2) surfaces.     

Adsorption of oxalate on rutile particles in aqueous solutions: a spectroscopic, electron-microscopic and theoretical study

The adsorption of oxalic acid from the aqueous phase at the surface of rutile nanoparticles has been investigated by attenuated total-reflection Fourier-transformed infrared (ATR-FTIR) measurements. A combination of high resolution transmission electron microscopy (HRTEM) and Wulff-type construction was used to elucidate the typical morphology of the nanocrystals. It is estimated that (110)-type facets present more than 85% of the exposed surface in the powder. The aqueous system was also studied quantum-chemically using the semiempirical method MSINDO. Geometry optimizations have been performed, and the vibration spectra of the most stable surface complexes have been calculated. A sequence of model types has been applied in the quantum-chemical calculations in order to take into account the effect of interaction of water and oxalic acid on the adsorption mechanism and the vibration spectra. It was found that the presence of the aqueous phase significantly changes the stability of the oxalic acid surface complexes compared with the bare TiO(2) surface. The combination of experimental and theoretical information allowed identification of three species as the main contributors to the surface speciation. Two bidentate species were found with the C-C bond parallel to the TiO(2) surface, one monoprotonated and one deprotonated, and a third species being monodentate and monoprotonated.     

Adsorption of organic substances on broken clay surfaces: a quantum chemical study

Hydrogen-bonded interactions between local defect structures on broken clay surfaces modeled as molecular clusters and the organic molecules acetic acid, acetate, and N-methylacetamide (NMA) have been investigated. Density functional theory and polarized basis sets have been used for the computation of optimized interaction complexes and formation energies. The activity of the defect structures has been characterized as physical or chemical in terms of the strength of the hydrogen bonds formed. Chemical defects lead to significantly enhanced interactions with stronger hydrogen bonds and larger elongation of OH bonds in comparison to the physical defects. The type of interaction with the defect structure significantly influences the planarity of the model peptide bond in NMA. Both cases, enhancement of the planarity by increase of the CN double bond character and strong deviations from planarity, are observed.     

The synthesis of nanocrystalline anatase and rutile titania in mixed organic media

The synthesis of anatase and rutile titania could be achieved in mixed organic media with the variation of alcohols in the media under mild conditions. Although a nonhydrolytic process cannot be excluded, it is suggested that the formation of titania in these systems is based mainly on the hydrolytic process initiated by the water generated as a result of an esterification reaction between the alcohols and acetic acid. It has been found that the phase of the TiO2 produced depends on the choice of alcohols and temperature. Partial morphology and size are also affected by these factors. It is proposed that the viscosity and pressure of the reaction media influence the particle size. X-ray diffraction, transmission electron microscopy, Raman spectroscopy, and UV-visible adsorption spectroscopy were employed to characterize the final products.     

Adsorption and dissociation of NH3 on clean and hydroxylated TiO2 rutile (110) surfaces: a computational study

The adsorption and dissociation of NH(3) on the clean and hydroxylated TiO(2) rutile (110) surfaces have been investigated by the first-principles calculations. The monodentate adsorbates such as H(3)N-Ti(a), H(2)N-Ti(a), N-Ti(a), H(2)N-O(a), HN-O(a), N-O(a) and H-O(a), as well as the bidentate adsorbate, Ti-N-Ti(a) can be formed on the clean surface. It is found that the hydroxyl group enhances the adsorption of certain adsorbates on the five-fold-coordinated Ti atoms (5c-Ti), namely H(2)N-Ti(a), HN-Ti(a), N-Ti(a) and Ti-N-Ti(a). In addition, the adsorption energy increases as the number of hydroxyl groups increases. On the contrary, the opposite effect is found for those on the two-fold-coordinated O atoms (2c-O). The enhanced adsorption of NH(x) (x = 1-2) on the 5c-Ti is due to the large electronegativity of the OH group, increasing the acidity of the Ti center. This also contributes to diminish the adsorption of NH(x) (x = 1-2) on the two-fold-coordinated O atoms (2c-O) decreasing its basicity. According to potential energy profile, the NH(3) dissociation on the TiO(2) surface is endothermic and the hydroxyl group is found to lower the energetics of H(2)N-Ti(a)+H-O(a) and HN-Ti(a)+2{H-O(a)}, but slightly raise the energetic of Ti-N-Ti(a)+3{H-O(a)} compare to those on the clean surface. However, the dissociation of NH(3) is found to occur on the hydroxylated surface with an overall endothermic by 31.8 kcal/mol and requires a barrier of 37.5 kcal/mol. A comparison of NH(3) on anatase surface has been discussed. The detailed electronic analysis is also carried out to gain insights into the interaction nature between adsorbate and surface.     

Adsorption of organic molecules on a melamine-modified porous polymer

Inverse gas chromatography in the infinite dilution regime was used to study the adsorp-tion of organic molecules on a micromesoporous styrene-divinylbenzene copolymer modified with melamine deposited onto its surface in amounts of 10^–6, 10^–5, 10^–4, 10^–3, 10^–2, and 5?10^–2 weight parts. Contributions of different intermolecular interactions and polarity of the samples to adsorption energy values were calculated using LFER and by Dong method. Contributions of methyl group to Helmholtz adsorption energy and to its dispersion compo-nent were determined. The polarity of the modified samples showed a non-linear dependence on the amount of the deposited modifier (pC): at 4 < pC < 6, it increases as the modifier concentration grows, abruptly falls at pC = 3, and does not change with the further decrease in pC. This is probably caused by the formation of melamine intermolecular associates at higher modifier concentrations.     

Adsorption of organic molecules on silica surface

The adsorption behaviour of various organic adsorbates on silica surface is reviewed. Most of the structural information on silica is obtained from IR spectral data and from the characteristics of water present at the silica surface. Silica surface is generally embedded with hydroxy groups and ethereal linkages, and hence considered to have a negative charged surface prone to adsorption of electron deficient species. Adsorption isotherms of the adsorbates delineate the nature of binding of the adsorbate with silica. Aromatic compounds are found to involve the pi-cloud in hydrogen bonding with silanol OH group during adsorption. Cationic and nonionic surfactants adsorb on silica surface involving hydrogen bonding. Sometimes, a polar part of the surfactants also contributes to the adsorption process. Styryl pyridinium dyes are found to anchor on silica surface in flat-on position. On modification of the silica by treating with alkali, the adsorption behaviour of cationic surfactant or polyethylene glycol changes due to change in the characteristics of silica or modified silica surface. In case of PEG-modified silica, adsolubilization of the adsorbate is observed. By using a modified adsorption equation, hemimicellization is proposed for these dyes. Adsorptions of some natural macromolecules like proteins and nucleic acids are investigated to study the hydrophobic and hydrophilic binding sites of silica. Artificial macromolecules like synthetic polymers are found to be adsorbed on silica surface due to the interaction of the multifunctional groups of the polymers with silanols. Preferential adsorption of polar adsorbates is observed in case of adsorbate mixtures. When surfactant mixtures are considered to study competitive adsorption on silica surface, critical micelle concentration of individual surfactant also contributes to the adsorption isotherm. The structural study of adsorbed surface and the thermodynamics of adsorption are given some importance in this review.     

Adsorption of small molecules on silver clusters

We report investigations of adsorption of N(2) and O(2) molecules on silver cluster cations. We have first revisited structures of small silver clusters based on first-principles calculations within the framework of density functional theory with hybrid functional. The 2D to 3D transition for the neutral clusters occurs from n = 6 to 7 and for cations, in agreement with experiments, from n = 4 to 5. With the refined structures, adsorption energies of N(2) and O(2) molecules have been calculated. We have identified characteristic drops in the adsorption energies of N(2) that further link our calculations and experiments, and confirm the reported 2D-3D transition for cations. We have found that perturbations caused by physisorbed molecules are small enough that the structures of most Ag clusters remain unchanged, even though physisorption stabilizes the 3D Ag(7)(+) structure slightly more than the 2D counterpart. Results for pure O(2) adsorption indicate that charge transfer from Ag(n)(+) to O(2) occurs when n > 3. Below that size oxygen essentially physisorbes such as nitrogen to the cluster. We interpret the experimentally observed mutually cooperative co-adsorption of oxygen and nitrogen using results from density functional theory with generalized gradient approximations. The key to the enhancement is N(2)-induced increase in charge transfer from Ag(n)(+) cations to O(2).     

Adsorption of small molecules on helical gold nanorods: A relativistic density functional study

We study the adsorption of a variety of small molecules on helical gold nanorods using relativistic density functional theory. We focus on Au₄₀ which consists of a central linear strand of five gold atoms with seven helical strands of five gold atoms on a coaxial tube. All molecules preferentially adsorb at a single low‐coordinated gold atom on the coaxial tube at an end of Au₄₀. In most cases, there is significant charge transfer (CT) between Au₄₀ and the adsorbate, for CO and NO₂, there is CT from the Au₄₀ to adsorbate while for all other molecules there is CT from the adsorbate to Au₄₀. Thus, Au₄₀‐adsorbate can be described as a donor–accepter complex and we use charge decomposition analysis to better understand the adsorption process. We determine the adsorption energy order to be C₅H₅N >NO₂ > CO > NH₃ > CH₂?CH₂ > CH₂?CH? CHO > NO > HC?CH > H₂S > SO₂ > HCN > CH₃OH > H₂C?O > O₂ > H₂O > CH₄ > N₂. We find that the Au? C, Au? N, Au? S, and Au? O bonds are surprisingly strong, with clear implications for reactivity enhancement of the adsorbate. The Au? H bond is relatively weak but, for interactions via an H atom that is bonded to a carbon atom (e.g., CH₄), we find that there is large charge polarization of the Au? H? C moiety and partial activation of the inert C? H bond. Although the Au? S and Au? O bonds are generally weaker than the Au? C and Au? N bonds, we find that adsorption of H₂S or H₂O causes greater distortion of Au₄₀ in the binding region. However, the degree of distortion is small and the helical structure is retained, demonstrating the stability of the helical Au₄₀ nanorod under perturbations. © 2014 Wiley Periodicals, Inc.     

Preparation and characterization of terraced surfaces of low-index faces of anatase, rutile, and brookite

Simple polishing and relatively low temperature annealing procedures for preparing atomically flat terraced surfaces of various single-crystal TiO2 polymorphs are described. Anatase (101), anatase (001), rutile (100), rutile (110), and brookite (111) surfaces could all be prepared with a terraced surface structure as revealed in AFM images. The rutile (100) and (110) and anatase (101) surfaces were also shown to produce acceptable LEED patterns immediately upon insertion into a UHV system without the usual sputter and anneal cycles.     

Adsorption configurations and energetics of BClx (x=0-3) on TiO2 anatase (101) and rutile (110) surfaces

This study investigates the adsorption and reactions of boron trichloride and its fragments (BClx) on the TiO2 anatase (101) and rutile (110) surfaces by first-principles calculations. The results show that the possible absorbates on the TiO2 anatase and rutile surfaces are very similar. The single- and double-site adsorption configurations are found for both anatase and rutile surfaces. The particular adsorbate feature on the anatase surface is its in-plane double-site adsorption by Ti and O from its sawtooth surface. The potential energy surface shows that BCl3 can be adsorbed on the O site for both the anantase and rutile surfaces and the most of the BClx reaction on both anatase and rutile surfaces are endothermic, except for the dissociative reaction on the rutile surface. The energy levels of the BClx reactions between the anatase and rutile surfaces show that the rutile surface has lower energy levels than those of anatase surface. This result reveals that the BClx dissociative adsorption more easily occurs on rutile surface than on anatase surface.     

Spectroscopic analysis of small organic molecules: a comprehensive near-edge x-ray-absorption fine-structure study of C6-ring-containing molecules

We report high-resolution C 1s near-edge x-ray-absorption fine-structure (NEXAFS) spectra of the C6-ring-containing molecules benzene (C6H6), 1,3- and 1,4-cyclohexadiene (C6H8), cyclohexene (C6H10), cyclohexane (C6H12), styrene (C8H8), and ethylbenzene (C8H10) which allow us to examine the gradual development of delocalization of the corresponding pi electron systems. Due to the high experimental resolution, vibrational progressions can be partly resolved in the spectra. The experimental spectra are compared with theoretical NEXAFS spectra obtained from density-functional theory calculations where electronic final-state relaxation is accounted for. The comparison yields very good agreement between theoretical spectra and experimental results. In all cases, the spectra can be described by excitations to pi*- and sigma*-type final-state orbitals with valence character, while final-state orbitals of Rydberg character make only minor contributions. The lowest C 1s-->1pi* excitation energy is found to agree in the (experimental and theoretical) spectra of all molecules except for 1,3-cyclohexadiene (C6H8) where an energy smaller by about 0.6 eV is obtained. The theoretical analysis can explain this result by different binding properties of this molecule compared to the others.     

Anisotropic behavior of organic molecules on prepatterned surfaces

The nucleation of organic molecules on surfaces, prepatterned with stripes, is investigated with emphasis on anisotropy effects. Representing the molecules as ellipsoids, the related particle-particle interaction is modeled by means of a generalized Gay-Berne potential for similar biaxial particles. The orientation behavior of these ellipsoidal molecules induced by the stripe pattern is studied for the first monolayer by performing kinetic Monte Carlo simulations. It is shown how the properties of the particle alignment depend on energy scales, temperature, and flux. Based on the fact the particles strictly arrange in rows, it is furthermore instructive to analyze the orientation behavior within the different rows. Finally, the transfer of orientation from a preset row of molecules with fixed orientation to other nucleating particles is examined.     

Computational study on the reactions of H2O2 on TiO2 anatase (101) and rutile (110) surfaces

This study investigates the adsorption and reactions of H(2)O(2) on TiO(2) anatase (101) and rutile (110) surfaces by first-principles calculations based on the density functional theory in conjunction with the projected augmented wave approach, using PW91, PBE, and revPBE functionals. Adsorption mechanisms of H(2)O(2) and its fragments on both surfaces are analyzed. It is found that H(2)O(2) , H(2)O, and HO preferentially adsorb at the Ti(5c) site, meanwhile HOO, O, and H preferentially adsorb at the (O(2c))(Ti(5c)), (Ti(5c))(2), and O(2c) sites, respectively. Potential energy profiles of the adsorption processes on both surfaces have been constructed using the nudged elastic band method. The two restructured surfaces, the 1/3 ML oxygen covered TiO(2) and the hydroxylated TiO(2), are produced with the H(2)O(2) dehydration and deoxidation, respectively. The formation of main products, H(2)O(g) and the 1/3 ML oxygen covered TiO(2) surface, is exothermic by 2.8 and 5.0 kcal/mol, requiring energy barriers of 0.8 and 1.1 kcal/mol on the rutile (110) and anatase (101) surface, respectively. The rate constants for the H(2)O(2) dehydration processes have been predicted to be 6.65 × 10(-27) T(4.38) exp(-0.14 kcal mol(-1)/RT) and 3.18 × 10(-23) T(5.60) exp(-2.92 kcal mol(-1)/RT) respectively, in units of cm(3) molecule(-1) s(-1).     

Adsorption of organic molecules on the TiO2(011) surface: STM study

High resolution scanning tunneling microscopy has been applied to investigate adsorption and self-assembly of large organic molecules on the TiO(2)(011) surface. The (011) face of the rutile titania has been rarely examined in this context. With respect to possible industrial applications of rutile, quite often in a powder form, knowledge on behavior of organic molecules on that face is required. In the presented study we fill in the gap and report on experiments focused on the self-assembly of organic nanostructures on the TiO(2)(011) surface. We use three different kinds of organic molecules of potential interest in various applications, namely, PTCDA and CuPc representing flat, planar stacking species, and Violet Landers specially designed for new applications in molecular electronics. In order to reach a complete picture of molecular behavior, extended studies with different surface coverage ranging from single molecule up to 2 monolayer (ML) thick films are performed. Our results show that the adsorption behavior is significantly different from previously observed for widely used metallic templates. Creation of highly ordered molecular lines, quasi-ordered wetting layers, controlled geometrical reorientation upon thermal treatment, existence of specific adsorption geometries, and prospects for tip-induced molecule ordering and manipulation provide better understanding and add new phenomena to the knowledge on the (011) face of rutile titania.     

Properties of large organic molecules on metal surfaces

The adsorption of large organic molecules on surfaces has recently been the subject of intensive investigation, both because of the molecules’ intrinsic physical and chemical properties, and for prospective applications in the emerging field of nanotechnology. Certain complex molecules are considered good candidates as basic building blocks for molecular electronics and nanomechanical devices. In general, molecular ordering on a surface is controlled by a delicate balance between intermolecular forces and molecule–substrate interactions. Under certain conditions, these interactions can be controlled to some extent, and sometimes even tuned by the appropriate choice of substrate material and symmetry. Several studies have indicated that, upon molecular adsorption, surfaces do not always behave as static templates, but may rearrange dramatically to accommodate different molecular species. In this context, it has been demonstrated that the scanning tunnelling microscope (STM) is a very powerful tool for exploring the atomic-scale realm of surfaces, and for investigating adsorbate–surface interactions. By means of high-resolution, fast-scanning STM unprecedented new insight was recently achieved into a number of fundamental processes related to the interaction of largish molecules with surfaces such as molecular diffusion, bonding of adsorbates on surfaces, and molecular self-assembly. In addition to the normal imaging mode, the STM tip can also be employed to manipulate single atoms and molecules in a bottom–up fashion, collectively or one at a time. In this way, molecule-induced surface restructuring processes can be revealed directly and nanostructures can be engineered with atomic precision to study surface quantum phenomena of fundamental interest. Here we will present a short review of some recent results, several of which were obtained by our group, in which several features of the complex interaction between large organic molecules and metal surfaces were revealed. The focus is on experiments performed using STM and other complementary surface-sensitive techniques.     

Photoluminescence of anatase and rutile TiO2 particles

Nonaqueous reactions between titanium(IV) chloride and alcohols (benzyl alcohol or n-butanol) were used for the synthesis of anatase TiO2 particles, while rutile TiO2 particles were synthesized in aqueous media by acidic hydrolysis of titanium(IV) chloride. The X-ray diffraction measurements proved the exclusive presence of either the anatase or the rutile phase in prepared samples. The photoluminescence of both kinds of particles (anatase and rutile) with several well-resolved peaks extending in the visible spectral region was observed, and the quantum yield at room temperature was found to be 0.25%. Photon energy up-conversion from colloidal anatase and rutile TiO2 particles was observed at low excitation intensities. The energy of up-converted photoluminescence spans the range of emission of normal photoluminescence. The explanation of photon energy up-conversion involves mid-gap energy levels originating from oxygen vacancies.     

Adsorption, diffusion and desorption of chlorine on and from rutile TiO2{110}: a theoretical investigation.

The adsorption, diffusion and desorption of chlorine on and from stoichiometric, reduced and partially reduced (defective) rutile TiO2{110} are investigated using ab initio density functional theory (DFT) calculations. Theoretical results are compared with experimental investigations, and microkinetic simulations based on DFT values are then used to verify the diffusion mechanisms assumed in the experimental investigations.     

Adsorption of two phenoxyacid compounds on a clay surface: a theoretical study

Using density functional theory methods, we studied the adsorption of (4-chloro-2-methylphenoxy)acetic acid (MCPA) and 2-(4-chlorophenoxy)-2-methylpropanoic acid, therapeutically used under the name of clofibric acid (CA), two commonly detected water pollutants, both in neutral and ionized form on a model surface of muscovite. We report the geometries of the adsorbed species and discuss their interaction with the surface. It was found that the ionized adsorbates interact more strongly with the surface than do their neutral forms particularly for MCPA when compared with CA, which points to the same direction of previous experimental findings. Changes on the electron density due to adsorption has been studied by means of Bader charges analysis and it was found that electronic density is transferred from the anions to the surface and less significantly from the surface to the neutral molecules on adsorption.