"Recapitation" of nido-Metallacarboranes as a Synthetic Tool: Preparation of Apically Substituted CoC(2)B(4) Clusters via Boron Insertion(1)

Derivatives of CpCo(2,3-Et(2)C(2)B(4)H(4)) containing substituents at the apex boron atom [B(7)], the first examples of apically functionalized small metallacarborane clusters, have been prepared in good yield via boron insertion into the nido-CpCo(2,3-Et(2)C(2)B(3)H(3))(2-) dianion. Reaction of this substrate with BX(3) (X = Cl, Br, I) or PhBCl(2) in toluene at room temperature gave the corresponding CpCo(2,3-Et(2)C(2)B(4)H(3)-7-X) derivatives (2a-c and 3 in which X = Cl, Br, I, and Ph, respectively), all of which were isolated via column chromatography as air-stable yellow solids and characterized via (1)H, (11)B, and (13)C NMR, infrared, UV-visible, and mass spectra. Treatment of the same dianion with 1,4-(Br(2)B)(2)C(6)H(4) afforded air-stable orange crystalline [CpCo(2,3-Et(2)C(2)B(4)H(3)-7)](2)C(6)H(4) (4). The structure of this compound was defined via spectroscopy and X-ray crystallography as a bis(cobaltacarborane) complex linked at the apex borons via a 1,4-phenylene bridge. Crystal data for 4: space group Pbca; a = 15.056(7) ?, b = 21.612 (8) ?, c = 11.641 (3) ?; Z = 4; R = 0.045 for 1582 independent reflections having I > 3sigma(I).     

Synthesis and characterization of half-sandwich N-heterocyclic carbene complexes of cobalt and rhodium

A series of novel half-sandwich M(I) and M(III) complexes (M = Co, Rh) bearing the N-heterocyclic carbene ligand 1,3-dimesitylimidazol-2-ylidene (IMes) have been prepared and characterized. Thus, (eta5-C(5)R(5))M(IMes)(C(2)H(4))(M = Co, Rh; R = H, Me) were obtained from the corresponding bis(ethene) complexes (eta5-C(5)R(5))M(C(2)H(4))(2), except for CpRh(IMes)(C(2)H(4)) which was prepared via the novel 16-electron Rh(I) compound Rh(IMes)(C(2)H(4))(2)Cl. The carbonyl compounds (eta5-C(5)R(5))Co(IMes)(CO)(R = H, Me) were synthesized by thermal CO substitution of (eta5-C(5)R(5))Co(CO)(2). A diamagnetic, apparently 16-electron Co(III) compound [CpCo(IMes)I](+)[I(3)(-)] was obtained from CpCo(IMes)(CO) and I(2). Finally, Co(III) and Rh(III) complexes CpCo(IMes)Me(2) and Cp*Rh(IMes)Me(2) were prepared by methylation of [CpCo(IMes)I](+)[I(3)(-)], and ligand exchange at Cp*Rh(Me(2)SO)Me(2), respectively. The molecular structures of CpCo(IMes)(CO), CpRh(IMes)(C(2)H(4)), Cp*Rh(IMes)(C(2)H(4)), and Cp*Rh(IMes)Me(2) were determined by single crystal X-ray diffraction. Steric and electronic factors imposed by the strongly donating and sterically demanding IMes ligand are discussed on the basis of X-ray crystallographic, NMR, and IR spectroscopic analyses. Very poor correlations are found between values for (1)J(Rh-C(carbene)) and dRh-C(carbene) data for Rh(i) N,N-heterocyclic carbene complexes including literature data and this work.     

Synthesis, electrochemistry and luminescence of [Pt{4'-(R)trpy}(CN)](+) (R = Ph, o-CH(3)C(6)H(4), o-ClC(6)H(4) or o-CF(3)C(6)H(4); trpy = 2,2':6',2'-terpyridine): crystal structure of [Pt{4'-(Ph)trpy}(CN)]BF(4) x CH(3)CN

The synthesis and characterization of [Pt{4'-(R)trpy}(CN)]X (R = Ph, X = BF(4) or SbF(6); R = o-CH(3)C(6)H(4), X = SbF(6); R = o-ClC(6)H(4), X = SbF(6); or R = o-CF(3)C(6)H(4), X = SbF(6)) are described where trpy = 2,2':6',2'-terpyridine. Single crystals of [Pt{4'-(Ph)trpy}(CN)]BF(4).CH(3)CN were grown by vapour diffusion of diethyl ether into an acetonitrile solution of [Pt{4'-(Ph)trpy}(CN)]BF(4). An X-ray crystal structure determination of the solvated complex confirms the near linear coordination of the cyanide ligand to the platinum centre. The cation is almost planar as evidenced by a twist of only 1.9 degrees of the phenyl group out of the plane of the terpyridyl moiety. Cyclic voltammograms were recorded in DMF/0.1 M TBAH for the [Pt{4'-(R)trpy}(CN)](+) cations. Two quasi-reversible one-electron reduction (cathodic) waves are observed with E(1/2) values that show the trend expected for an increasingly lower energy of the trpy-based LUMO of the complex i.e., [Pt{4'-(Ph)trpy}(CN)](+) approximately [Pt{4'-(o-CH(3)C(6)H(4))trpy}(CN)](+) < [Pt{4'-(o-ClC(6)H(4))trpy}(CN)](+) < [Pt{4'-(o-CF(3)C(6)H(4))trpy}(CN)](+). All the [Pt(4'-(R)trpy}(CN)](+) cations are photoluminescent in dichloromethane. Emission by [Pt{4'-(Ph)trpy}(CN)](+) is from an excited state with largely (3)MLCT orbital parentage, but with some intraligand (3)pi-pi* character mixed-in (tau = 0.1 micros). In contrast, the other three cations display emission that appears exclusively intraligand (3)pi-pi* in origin (tau approximately 0.8 micros). Emission spectra have been recorded in a low concentration frozen DME {1 : 5 : 5 (v/v) DMF-MeOH-EtOH} glass. For the R = o-CH(3)C(6)H(4), o-ClC(6)H(4) and o-CF(3)C(6)H(4) cations the envelope of vibronic structure and energies of the vibrational components are essentially the same as that recorded in dichloromethane. However, for the [Pt{4'-(Ph)trpy}(CN)](+) cation, there is a blue-shift in the energies of the vibrational components as compared to that recorded in dichloromethane, as well as a change in the envelope of vibronic structure to a more "domed" pattern; this has been interpreted in terms of a higher percentage of intraligand (3)pi-pi* character in the emitting state for the glass. Increasing the concentration of the glass invariably leads to aggregation of the cations and the consequent development of new low energy bands, such that at 0.200 mM broad peaks centred at ca. 650 and 700 nm dominate the spectrum; these bands are assigned to excimeric (3)pi-pi* and (3)MMLCT emission, respectively.     

Asymmetric synthesis of (4R,5R)-cytoxazone and (4R,5S)-epi-cytoxazone

(4R,5R)-Cytoxazone has been prepared in four steps and in 61% overall yield and >98% ee. Conjugate addition of lithium (R)-N-benzyl-N-[small alpha]-methylbenzylamide to tert-butyl (E)-3-(p-methoxyphenyl)prop-2-enoate and subsequent in situ diastereoselective enolate oxidation with (+)-(camphorsulfonyl)oxaziridine gave tert-butyl (2R,3R,[small alpha]R)-2-hydroxy-3-(p-methoxyphenyl)-3-(N-benzyl-N-[small alpha]-methylbenzylamino)propanoate in >98% de. Subsequent N-benzyl deprotection to the primary [small beta]-amino ester via hydrogenolysis, oxazolidinone formation with C(2)-retention by treatment with diphosgene and chemoselective ester reduction furnishes (4R,5R)-cytoxazone. The synthesis of the C(5)-epimer, (4R,5S)-epi-cytoxazone in 44% overall yield, has also been completed via a protocol involving N-Boc protection of the primary [small beta]-amino ester, utilization of the N-Boc group to facilitate simultaneous C(2)-inversion and oxazolidinone formation, and subsequent reduction.     

Synthesis and x-ray crystal structure of [(THF)Zn(O(2)(OH)SiR)](4) (R = (2,6-i-Pr(2)C(6)H(3))N(SiMe(3))): enroute to larger aggregates

Reaction of aminosilanetriol RSi(OH)(3) (1) (R = (2,6-i-Pr(2)C(6)H(3))N(SiMe(3))) with diethyl zinc at room temperature in 1:1 stoichiometric ratio affords [(THF)Zn(O(2)(OH)SiR)](4) (2) (R = (2,6-i-Pr(2)C(6)H(3))N(SiMe(3))) in good yield. The single-crystal X-ray diffraction studies reveal that 2 is monoclinic, P2(1), with a = 17.117(3) A, b = 16.692(5) A, c = 17.399(4) A, alpha = gamma = 90 degrees, beta = 91.45(7) degrees, and Z = 2. The molecular structure of 2 contains two puckered eight-membered Zn(2)Si(2)O(4) rings, which are connected by the Zn-O bonds and form two planar four-membered Zn(2)O(2) rings. Compound 2 contains an unreacted hydroxyl group on each silicon atom, and hence, we carried out the reactions of 2 with dimethylzinc and methyllithium to form [Zn(4)(THF)(4)(MeZn)(4)(O(3)SiR)(4)] (3) (R = (2,6-i-Pr(2)C(6)H(3))N(SiMe(3))) and [(L)ZnLi(O(3)SiR)](4) (4) (L = 1,4-(Me(2)N)(2)C(6)H(4), R = (2,6-i-Pr(2)C(6)H(3))N(SiMe(3))), respectively. This suggested that 2 could be an intermediate product formed during the synthesis of 3 and 4.     

Synthesis and properties of palladium diselenolenes: X-ray crystal structures of [Pd[SeC(R(1))=C(R(2))Se](PBu(3))(2)] [R(1), R(2) = (CH(2))(n), n = 4, 5, 6

The reaction between [Pd(2)(dba)(3)] (dba = dibenzylideneacetone), tributylphosphine, and a bis(cycloalkeno)-1,4-diselenin leads to either a mononuclear diselenolene [Pd[SeC(R(1))=C(R(2))Se](PBu(3))(2)] or a dinuclear diselenolene [Pd(2)[SeC(R(1))=C(R(2))Se](2)(PBu(3))(2)] [R(1), R(2) = (CH(2))(n), n = 4, 5, 6] depending on the stoichiometry employed. Treatment of the dinuclear diselenolenes with 1,2-bis(diphenylphosphino)ethane (dppe) provides a high-yielding route to the mononuclear species [Pd[SeC(R(1))=C(R(2))Se](dppe)]. All new compounds have been characterized by standard spectroscopic and analytical techniques, in particular by multinuclear NMR spectroscopy; the structure of each of the mononuclear tributylphosphine complexes has been determined by X-ray crystallography. Computational studies show that the observed asymmetry of the diselenolenes in the solid state is a result primarily of intramolecular repulsive interactions between the ligands.     

Tetrasilacyclobutadiene ((t)Bu(2)MeSi)(4)Si(4): a new ligand for transition-metal complexes

The anionic complex of [tetrakis(di-tert-butylmethylsilyl) tetrasilacyclobutadiene]dicarbonylcobalt, [(R4Si4)Co(CO)2]-.K+ (R = SiMetBu2) 2-.K+, was synthesized by the reaction of tetrasilacyclobutadiene dianion dipotassium salt [R4Si4]2-.2K+ 1 with an excess of CpCo(CO)2 in THF. X-ray analysis of 2-.[K+(diglyme)2(THF)] showed an almost planar Si4 ring of rectangular shape with an in-plane arrangement of the silyl substituents. 2- was also prepared as a free anion with the [K+[2.2.2]cryptand] counterion by complexation with [2.2.2]cryptand and as a dimer {2-.[K+(THF)3]}2 without complexing reagents in THF. Such a tetrasilacyclobutadiene fragment represents a new type of ligand for Co complexes, being the first example of a cyclobutadiene containing only heavier group 14 elements.     

Hybrid cluster-cages formed via cyanometalate condensation: Cs subset Co(4)Ru(6)S(2)(CN)(12), Co(4)Ru(9)S(6)(CN)(9), and Rh(4)Ru(9)S(6)(CN)(9) frameworks

Condensation of cyanometalates and cluster building blocks leads to the formation of hybrid molecular cyanometalate cages. Specifically, the reaction of [Cs subset [CpCo(CN)(3)](4)[CpRu](3)] and [(cymene)(2)Ru(3)S(2)(NCMe)(3)]PF(6) produced [Cs subset [CpCo(CN)(3)](4)[(cymene)(2)Ru(3)S(2)][CpRu](3)](PF(6))(2), Cs subset Co(4)Ru(6)S(2)(2+). Single-crystal X-ray diffraction, NMR spectroscopy, and ESI-MS measurements show that Cs subset Co(4)Ru(6)S(2)(2+ ) consists of a Ru(4)Co(4)(CN)(12) box fused with a Ru(3)S(2) cluster via a common Ru atom. The reaction of PPN[CpCo(CN)(3)] and 0.75 equiv of [(cymene)(2)(MeCN)(3)Ru(3)S(2)](PF(6))(2) in MeCN solution produced [[CpCo(CN)(3)](4)[(cymene)(2)Ru(3)S(2)](3)](PF(6))(2), Co(4)Ru(9)S(6)(2+). Crystallographic analysis, together with NMR and ESI-MS measurements, shows that Co(4)Ru(9)S(6)(2+ ) consists of a Ru(3)Co(4)(CN)(9) "defect box" core, wherein each Ru is fused to a Ru(3)S(2) clusters. The analogous condensation using [CpRh(CN)(3)](-) in place of [CpCo(CN)(3)](-) produced the related cluster-cage Rh(4)Ru(9)S(6)(2+). Electrochemical analyses of both Co(4)Ru(9)S(6)(2+) and Rh(4)Ru(9)S(6)(2+) can be rationalized in the context of reduction at the cluster and the Co(III) subunits, the latter being affected by the presence of alkali metal cations.     

Synthesis and structure of heterometallic complexes (RhFe, CoFe) containing bridging 1,2-dicarba-closo-dodecarborane-1,2-dichalcogenolato ligands

The prototype hetero-binuclear complexes containing metal-metal bonds, {CpRh[E2C2(B10H10)]}[Fe(CO)3] (Cp = Cp* = eta 5-Me5C5, E = S(5a), Se(5b); Cp = Cp = eta 5-1,3-tBu2C5H3, E = S(6a), Se(6b)) and {CpCo[E2C2(B10H10)]}[Fe(CO)3] (Cp = Cp* = eta 5-Me5C5, E = S(7a), Se(7b); Cp = Cp = eta 5-C5H5, E = S(8a), Se(8b)) were obtained from the reactions of 16-electron complexes CpRh[E2C2(B10H10)] (Cp = Cp*, E = S(1a), Se(1b); Cp = Cp, E = S(2a), Se(2b)), CpCo[E2C2(B10H10)] (Cp = Cp*, E = S(3a), Se(3b); Cp = Cp, E = S(4a), Se(4b)) with Fe(CO)5 in the presence of Me3NO. The molecular structures of {Cp*Rh[E2C2(B10H10)]}[Fe(CO)3] (E = S(5a), Se(5b)), {CpRh[S2C2(B10H10)]}[Fe(CO)3] (6a) {Cp*Co[S2C2(B10H10)]}[Fe(CO)3] (7a) and {CpCo[S2C2(B10H10)]}[Fe(CO)3] (8a) have been determined by X-ray crystallography. All these complexes were characterized by elemental analysis and IR and NMR spectra.     

Synthese und reaktivität von dienylmetall-verbindungen : XXVII. Ein einfacher weg zur synthese von cyclopentadienylcobalt(III)-dikationen

CpCo(CO)₂ is oxidised by [Cp₂Fe]BF₄ (Cp = C₅H₅) in the presence of neutral ligands L to give the dications [CpCoL₃]²⁺ (L = SMe₂, S(n-C₄H₉)₂, PMe₃, C₅H₅N, MeCN; Me = CH₃). In [CpCo(SMe₂)₃]²⁺, sulfane ligands are substituted by neutral ligands L, L---L and L---L---L, to give the complexes [CpCoL₃]²⁺ (L = SeMe₂, TeMe₂, PMe₃, P(OMe)₃, AsMe₃, SbMe₃, t-C₄H₉NC, C₅H₅N, MeCN), [Cp-Co(L---L)SMe₂]²⁺ (L---L = R₂P(CH₂)_nPR₂, n = 1, 2, R = C₆H₅; bipyridine, o-phenanthroline, neocuproin) and [CpCo(L---L---L)]²⁺ (L---L---L = RP(CH₂CH₂PR₂)₂, R = C₆H₅). The dications react with iodide resulting in the monocations [CpCoL₂I]⁺ and [CpCo(L---L)I]⁺. Azacobaltocinium cations [CpCo(C₄R₂H₂N)]⁺ (R = H, CH₃) are obtained by reaction of [CpCo(SMe₂)₃]²⁺ with metal pyrrolides.     

Structural, Spectroscopic, and Magnetochemical Characterization of the Trinuclear Vanadium(III) Carboxylates [V(3)O(O(2)CR)(6)L(3)](ClO(4)) (R = Various Groups; L = Pyridine, 4-Picoline, 3,5-Lutidine)

Synthetic procedures are described that allow access to the [V(3)O(O(2)CR)(6)L(3)](ClO(4)) (R = various groups; L = pyridine (py), 4-picoline (pic) or 3,5-lutidine (lut)) family of complexes. Treatment of VCl(3)(THF)(3) with NaO(2)CR (R = Me, Et) in RCO(2)H/py, pic/MeCN, or CH(2)Cl(2) solution followed by addition of NBu(n)(4)ClO(4) leads to isolation of [V(3)O(O(2)CR)(6)L(3)](ClO(4)) salts in 47-95% yields. A similar procedure for R = C(6)H(5), C(6)H(4)-p-OMe, C(6)H(3)-m-Me(2), and C(6)H(4)-p-Cl but omitting addition of NaO(2)CR provides the corresponding benzoate or substituted-benzoate derivatives in 24-56% yields. The X-ray structure of [V(3)O(O(2)CEt)(6)(pic)(3)](ClO(4)) (4) shows the anion to consist of a [V(3)O](7+) triangular fragment with a &mgr;(3)-O(2)(-) ion in the V(3) plane; each triangular edge is bridged by two EtCO(2)(-) groups in their familiar syn,syn modes, and there is a terminal pic group on each V(III) completing distorted octahedral geometries at the metal atoms. The cation has imposed C(2) symmetry (isosceles V(3) triangle), the C(2) axis passing through one V atom and the central &mgr;(3)-O atom, but has D(3)(h)() virtual symmetry (equilateral V(3) triangle). Complex 4 crystallizes in monoclinic space group C2/c with the following unit cell dimensions at -171 degrees C: a = 13.935(2) ?, b = 18.323(2) ?, c = 17.470(2) ?, beta = 95.55(1) degrees, V = 4439.7 ?(3), Z = 4. The structure was solved using 2657 unique reflections with F > 3sigma(F) and refined on F to conventional R (R(w)) values of 0.058 (0.066). Variable-temperature, solid-state magnetic susceptibility measurements were made on complex 1 in the 5.01-280 K region in a 1 kG magnetic field. The effective magnetic moment (&mgr;(eff)) per V(3) unit decreases gradually from 4.64 &mgr;(B) at 280 K to 1.76 &mgr;(B) at 5.01 K. The data were fit to the theoretical expression for an isosceles V(III)(3) complex, and the fitting parameters were J = -18.0(7) cm(-)(1), J' = -10.4(4) cm(-)(1), and g = 1.985, with TIP held constant at 600 x 10(-)(6) cm(3) mol(-)(1); J' refers to the unique exchange interaction within the isosceles triangle. The ground state of complex 1 thus has S = 0.     

A facile and general approach to the Rh-M (M = Co, Rh) single bond supported by ortho-carborane-1,2-dichalcogenolato ligands

A series of hetero- and homo-dinuclear complexes with direct metal-metal interaction are synthesized through reaction of Cp*Rh[E(2)C(2)(B(10)H(10))] (E = S (1a), Se (1b)) and CpRh[S(2)C(2)(B(10)H(10))] (2a) with low valent half-sandwich CpCo(CO)(2) or CpRh(C(2)H(4))(2) under moderate conditions. The resulting products, namely (Cp*Rh)(CpCo)[E(2)C(2)(B(10)H(10))] (E = S(3a); Se(3b)), (Cp*Rh)(CpRh)[E(2)C(2)(B(10)H(10))] (E = S(4a); Se(4b)) and (CpRh)(CpRh)[S(2)C(2)(B(10)H(10))] (5a), are fully characterized by IR and NMR spectroscopy and elemental analysis. The molecular structures of 3a, 3b, 4a, 4b and 5a are established by X-ray crystallography analyses, and the Rh-Co (2.4778(11) (3a) and 2.5092(16) (3b) A) and Rh-Rh bonds (2.5721(8) (4a), 2.6112(10) (4b), 2.5627(10) (5a) A) fall in the range of single bonds.     

A NEW NITROGEN-BRIDGED DINUCLEAR COBALT COMPLEX: STRUCTURAL CHARACTERIZATION OF (η~5-C_5H_5Co)_2[(μ-N~tC_4H_9)_2 SO_2]

<正> The title complex Co2 (η5-C5H5 )2 [(μ-NtC4H9 )2SO2 ] (1) was isolated from the reaction of CpCo (COD) with tC4H9N = S = NC4H9t and characterized by mass spectral,IR,1HNMR and X-ray diffraction measurements. Co2SO2N2C18H28 Mr = 454. 4, tetragonal,space group P41212 (#92) ,a=9. 212(1) ,c=22. 899(4) A ,V=1943. 0(8) A3,Z= 4,Dc= 1. 55g/cm3 ,F(000)=944,μ(MoKa) = 18.21cm-1 ,R= 0. 048 and Rw = 0. 055 for 682 (I>3σ(Ⅰ))observed unique reflections. G. O. F. = 1. 25. This molecule contains Co-Co bond (2. 335 (2) A ) with two doubly bridging N atoms of the (tC4H9N)2SO2 ligand.     

(XN)4R4簇合物的结构与化学键

用密度泛函理论,在B3LYP/6-311G水平上,对(XN)4R4 (X=C,Si,Ge;R=H,CH3,NH2,OH)及合成的先驱化合物(XN)2R2进行几何构型、电子结构、振动频率和化学反应焓变等进行了研究.结果表明,(RCN)4比(CNR)4更稳定.所有簇合物的零点能EZP值,R=H时最小,R=CH3时最大,R配位原子依次为C、N和O时,EZP值逐渐减小.     

New chiral ruthenium(II) catalysts containing 2,6-bis(4'-(R)-phenyloxazolin-2'-yl)pyridine (Ph-pybox) ligands for highly enantioselective transfer hydrogenation of ketones

Treatment of complex trans-[RuCl(2)(eta(2)-C(2)H(4))[kappa(3)-N,N,N-(R,R)-Ph-pybox]] [(R,R)-Ph-pybox = 2,6-bis[4'-(R)-phenyloxazolin-2'-yl]pyridine] with phosphines or phosphites in dichloromethane at 50 degrees C leads to the formation of novel ruthenium(II)-pybox complexes trans-[RuCl(2)(L)[kappa(3)-N,N,N-(R,R)-Ph-pybox]] [L = PPh(3) (1 a), PPh(2)Me (2 a), PPh(2)(C(3)H(5)) (3 a), PPh(2)(C(4)H(7)) (4 a), PMe(3) (5 a), PiPr(3) (6 a), P(OMe)(3) (7 a) and P(OPh)(3) (8 a)]. Likewise, reaction of trans-[RuCl(2)(eta(2)-C(2)H(4))[kappa(3)-N,N,N-(R,R)-Ph-pybox]] with PPh(3) or PiPr(3) in refluxing methanol leads to the complexes cis-[RuCl(2)(L)(kappa(3)-N,N,N-(R,R)-Ph-pybox] [L = PPh(3) (1 b), PiPr(3) (6 b)]. No trans-cis isomerisation of complexes 1 a-8 a has been observed. Complexes 1 a-8 a, 1 b, 6 b together with the analogous trans-[RuCl(2)[P(OMe)(3)][kappa(3)-N,N,N-(S,S)-iPr-pybox]] (10 a) and the previously reported trans- and cis-[RuCl(2)(PPh(3))[kappa(3)-N,N,N-(S,S)-iPr-pybox]] (9 a and 9 b, respectively) are active catalysts for the transfer hydrogenation of acetophenone in 2-propanol in the presence of NaOH (ketone/cat/NaOH 500:1:6). cis-Ph-pybox derivatives are the most active catalysts. In particular, cis complexes 1 b and 6 b led to almost quantitative conversions in less than 5 min with a high enantioselectivity (up to 95 %). A variety of aromatic ketones have also been reduced to the corresponding secondary alcohols with very high TOF and ee up to 94 %. The overall catalytic performance seems to be a subtle combination of the steric and/or electronic properties both the phosphines and the ketones. A high TOF (27 300 h(-1)) and excellent ee (94 %) have been found for the reduction of 3-bromoacetophenone with catalyst 6 b. Reductions of alkyl ketones also proceed with high and rapid conversions but low enantioselectivities are achieved.     

Solution structures and dynamic properties of chelated d(0) metal olefin complexes [eta(5): eta(1)-C(5)R(4)SiMe(2)N(t)Bu]Ti(OCMe(2)CH(2)CH(2)CH=CH(2))(+) (R = H, Me): Models for the [eta(5): eta(1)-C(5)R(4)SiMe(2)N(t)Bu]Ti(R')(olefin)(+) intermediates in "constrained geometry" catalysts.

To model the Ti-olefin interaction in the putative [eta(5): eta(1)-C(5)R(4)SiMe(2)N(t)Bu]Ti(R')(olefin)(+) intermediates in "constrained geometry" Ti-catalyzed olefin polymerization, chelated alkoxide olefin complexes [eta(5): eta(1)-C(5)R(4)SiMe(2)N(t)Bu]Ti(OCMe(2)CH(2)CH(2)CH=CH(2))(+) have been investigated. The reaction of [eta(5): eta(1)-C(5)R(4)SiMe(2)N(t)Bu]TiMe(2) (1a,b; R = H, Me) with HOCMe(2)CH(2)CH(2)CH=CH(2) yields mixtures of [eta(5)-C(5)R(4)SiMe(2)NH(t)Bu]TiMe(2)(OCMe(2)CH(2)CH(2)CH=CH(2)) (2a,b) and [eta(5): eta(1)-C(5)R(4)SiMe(2)N(t)Bu]TiMe(OCMe(2)CH(2)CH(2)CH=CH(2)) (3a,b). The reaction of 2a/3a and 2b/3b mixtures with B(C(6)F(5))(3) yields the chelated olefin complexes [[eta(5): eta(1)-C(5)R(4)SiMe(2)N(t)Bu]Ti(OCMe(2)CH(2)CH(2)CH=CH(2))][MeB(C(6)F(5))(3)] (4a,b; 71 and 89% NMR yield). The reaction of 2b/3b with [Ph(3)C][B(C(6)F(5))(4)] yields [[eta(5): eta(1)-C(5)Me(4)SiMe(2)N(t)Bu]Ti(OCMe(2)CH(2)CH(2)CH=CH(2))][B(C(6)F(5))(4)] (5b, 88% NMR yield). NMR studies establish that 4a,b and 5b exist as mixtures of diastereomers (isomer ratios: 4a/4a', 62/38; 4b/4b', 75/25; 5b/5b', 75/25), which differ in the enantioface of the olefin that is coordinated. NMR data for these d(0) metal olefin complexes show that the olefin coordinates to Ti in an unsymmetrical fashion primarily through C(term) such that the C=C pi bond is polarized with positive charge buildup on C(int). Dynamic NMR studies show that 4b/4b' undergoes olefin face exchange by a dissociative mechanism which is accompanied by fast inversion of configuration at Ti ("O-shift") in the olefin-dissociated intermediate. The activation parameters for the conversion of 4b to 4b' (i.e., 4b/4b' face exchange) are: DeltaH = 17.2(8) kcal/mol; DeltaS = 8(1) eu. 4a/4a' also undergoes olefin face exchange but with a lower barrier (DeltaH = 12.2(9) kcal/mol; DeltaS = -2(3) eu), for the conversion of 4a to 4a'.     

Synthesis and structures of the [benzamidinato]3- complexes Li3(tmeda)(L1)]2 and [Li(thf)4][Li5(L2)(OEt2)2] [L1 = N(SiMe3)C(Ph)N(SiMe3) and L2 = N(SiMe3)C(C6H4-4)NPh

Reduction at ambient temperature of each of the lithium benzamidinates [Li(L(1))(tmeda)] or [{Li(L(2))(OEt(2))(2)}(2)] with four equivalents of lithium metal in diethyl ether or thf furnished the brown crystalline [Li(3)(L(1))(tmeda)] (1) or [Li(thf)(4)][Li(5)(L(2))(2)(OEt(2))(2)] (2), respectively. Their structures show that in each the [N(R(1))C(R(3))NR(2)](3-) moiety has the three negative charges largely localised on each of N, N' and R = Aryl); a consequence is that the "aromatic" 2,3- and 5,6-CC bonds of R(3) approximate to being double bonds. Multinuclear NMR spectra in C(6)D(6) and C(7)D(8) show that 1 and 2 exhibit dynamic behaviour. [The following abbreviations are used: L(1) = N(SiMe(3))C(Ph)N(SiMe(3)); L(2) = N(SiMe(3))C(C(6)H(4)Me-4)N(Ph); tmeda = (Me(2)NCH(2)-)(2); thf = tetrahydrofuran.] This reduction is further supported by a DFT analysis.     

Synthesis and Crystal Structure of 5（R）-（1R,2S,5R）-Menthoxy-4（R）- N-cyclohexylaminobutyrolactone

1INTRODUCTION Substitutedγ-butyrolactones are a group of impor-tant compounds containing unique carbon skeleton of butyrolactone which is widely present in many natural products and have received considerable interest because of their biological and medicinal properties[1～4].Therefore,much attention has been paid to the new asymmetric methods for synthesi-zing these interesting compounds[5～11].The prece-ding results led us to explore the possibility of using cyclohexylamine to convert5(…     

Interception of a Rh(I)-Rh(III) dinuclear trihydride complex revealing the dihydrogen activation by [Rh(CO)2{(R,R)-Ph-BPE}

Reaction of [Rh(CO)(2){(R,R)-Ph-BPE}][BF(4)] 1 under 7 bar H(2) provides the dihydride [Rh(H)(2)(CO)(2){(R,R)-Ph-BPE}][BF(4)] 3, which reacts with the neutral hydride [Rh(H)(CO){(R,R)-Ph-BPE}] 2 arising from 3 in THF. The resulting complex is the dimeric monocationic Rh((I))-Rh((III)) complex [Rh(H)(2)(CO)(2){(R,R)-Ph-BPE}][BF(4)] 4.     

Insertion reactions of [M(SR)3(PMe2Ph)2] with CS2 (M = Ru, Os; R = C6F4H-4, C6F5). X-ray structures of [Ru(S2CSC6F4H-4)2(PMe2Ph)2], trans-thiolates [M(SR)2(S2CSR)(PMe2Ph)2] (M = Ru; R = C6F5 and M = Os; R = C6F4H-4), and trans-thiolate-phosphine [Os(SC6F5)2(S2CSC6F5)(PMe2Ph)2

Reactions of [M(SR)(3)(PMe(2)Ph)(2)] (M = Ru, Os; R = C(6)F(4)H-4, C(6)F(5)) with CS(2) in acetone afford [Ru(S(2)CSR)(2)(PMe(2)Ph)(2)] (R = C(6)F(4)H-4, 1; C(6)F(5), 3) and trans-thiolates [Ru(SR)(2)(S(2)CSR)(PMe(2)Ph)(2)] (R = C(6)F(4)H-4, 2; C(6)F(5), 4) or the isomers trans-thiolates [Os(SR)(2)(S(2)CSR)(PMe(2)Ph)(2)] (R = C(6)F(4)H-4, 5; C(6)F(5), 7) and trans-thiolate-phosphine [Os(SR)(2)(S(2)CSR)(PMe(2)Ph)(2)] (R = C(6)F(4)H-4, 6; C(6)F(5), 8) through processes involving CS(2) insertion into M-SR bonds. The ruthenium(III) complexes [Ru(SR)(3)(PMe(2)Ph)(2)] react with CS(2) to give the diamagnetic thiolate-thioxanthato ruthenium(II) and the paramagnetic ruthenium(III) complexes while osmium(III) complexes [Os(SR)(3)(PMe(2)Ph)(2)] react to give the paramagnetic thiolate-thioxanthato osmium(III) isomers. The single-crystal X-ray diffraction studies of 1, 4, 5, and 8 show distorted octahedral structures. (31)P [(1)H] and (19)F NMR studies show that the solution structures of 1 and 3 are consistent with the solid-state structure of 1.