Rational design of alkylene-linked bis-pyridiniumaldoximes as improved acetylcholinesterase reactivators

To improve the potency of 2-pralidoxime (2-PAM) for treating organophosphate poisoning, we dimerized 2-PAM and its analogs according to Wilson's pioneering work and the 3D structure of human acetylcholinesterase (hAChE) inactivated by isoflurophate. 1,7-Heptylene-bis-N,N'-syn-2-pyridiniumaldoxime, the most potent of the alkylene-linked dimeric reactivators, was readily synthesized using bistriflate and is 100 times more potent than 2-PAM in reactivating hAChE poisoned by isoflurophate. Experimental and computational studies confirm that 2-PAM in its biologically active form adopts the syn-I configuration. Further, they suggest that the improved performance of dimeric oximes is conferred by two-site binding with one oxime pointing toward the diisopropyl ester at the catalytic site of hAChE and the other anchored at the peripheral site. This type of binding may induce a conformational change in the acyl pocket loop which modulates the catalytic site via a domino effect.     

RP-HPLC determination of the lipophilicity of bispyridinium reactivators of acetylcholinesterase bearing a but-2-ene connecting linker

New acetylcholinesterase reactivators with either a (E) or (Z)-but-2-ene connecting linker were recently prepared. The purity of the compounds was checked by HPLC and was found to be sufficient for in-vitro screening. All the discussed bispyridinium reactivators were analyzed by reversed-phase high performance liquid chromatography (RP-HPLC) to measure lipophilicity. The procedure was performed under isocratic conditions with methanol as organic modifier in the mobile phase using an end-capped non-polar C₁₈ stationary phase RP column. Relationships between the lipophilicity (logarithm of the RP-HPLC capacity factor, log k) and chemical structures of the studied compounds are discussed. Lipophilicity was different for the (E) and (Z) compounds and varied among the compounds in each of these groups. The lipophilicity differences also indicated an apparent influence of intramolecular interactions. Lipophilicity calculations (log P/Clog P) by means of commonly used software were not successful due to the presence of quaternary nitrogen atoms in the molecules of the reactivators.     

New methods in synthesis of acetylcholinesterase reactivators and evaluation of their potency to reactivate cyclosarin-inhibited AChE

Nine potential AChE reactivators were synthesized using modification of currently known synthetic pathways. Their potency to reactivate AChE inhibited by cyclosarin nerve agent was tested in vitro. According to the previous results, 1,4-bis(2-hydroxyiminomethylpyridinium)butane dibromide seems to be the most potent AChE reactivator. The reactivation potency of these compounds depends on structural factors such as presence of quaternary nitrogens, length of the linking chain between both pyridinium rings, and position of the oxime moiety at the pyridinium ring.     

Structural modifications of dicationic acetylcholinesterase reactivators studied under ion‐pairing mechanism in reversed‐phase liquid chromatography

A study focused on the chromatographic behavior of several acetylcholinesterase reactivators under ion‐pairing mechanism is reported. Among these reactivators, dicationic oximes and carbamoyl‐based pyridinium congeners were studied, which form ion pairs with alkylsulfonate anions. This mechanism was studied for some major experimental parameters, such as the chain length of the ion‐pairing agent added to the aqueous phase, its concentration, temperature, and nature of the organic modifier from mobile phase. Retention data showed one or two possibilities of forming ion pairs and the tautomerism of the studied reactivators, for different pH values of the aqueous component. Double sigmoid shapes were obtained for the studied compounds for the dependence between retention factor and pH, indicating the possibility of one or two tautomeric equilibria: at pH close to 7 these compounds are not stable as dicationic species and they participate in the retention process as nitroso forms, which are not able to form ion pairs with alkylsulfonates. The dependences of the retention factor on the organic modifier content from mobile phase were linear. Two complementary theoretical models were used to explain the functional dependences for the retention data on the experimental parameters.     

First efficient synthesis of novel oxophenyl-arcyriaflavin analogs

New oxophenylarcyriaflavins were synthesized in a few efficient steps. The key steps involved at first a palladium cross-coupling between the 3-bromo-4-(1H-indol-3-yl)1-methylpyrrole-2,5-dione and the 2-formylphenylboronic acid or a methyl 2-trialkylstannylbenzoate, followed by an intramolecular acylation in a C-2 indolic position. All the sequence was carried out without any indolic protective group.     

Adsorption: an easy and efficient immobilisation of acetylcholinesterase on screen-printed electrodes

An amperometric biosensor based on acetylcholinesterase was constructed by simple adsorption of the enzyme on screen-printed electrodes (SPEs). This sensor was used to detect the inhibitory effects of organophosphorus and carbamate insecticides on acetylcholinesterase, and more particularly of chlorpyrifos ethyl oxon (CP-o). We demonstrate that enzyme adsorption on SPEs allows to obtain stable sensors that present good characteristics and are as efficient as other screen-printed biosensors based on covalent binding or entrapment of acetylcholinesterase (AChE).     

Influence of <Emphasis Type="Italic">gauche</Emphasis> effect on uncharged oxime reactivators for the reactivation of tabun-inhibited AChE: quantum chemical and steered molecular dynamics studies

The neutral oxime reactivator RS194B with a seven-membered ring has shown better efficacy towards the tabun-inhibited AChE than that of RS69N with a six-membered ring and RS41A with a five-membered ring. The difference in the efficacy of these reactivators has remained unexplored. We report here the origin of the difference of efficacy of these reactivators based on the conformational analysis, quantum chemical calculations and steered molecular dynamics (SMD) simulations. The conformational analysis using B3LYP/6-31G(d) level of theory revealed that RS41A and RS194B are more stable in gauche conformation due to the gauche effect (–N–C–C–N– bonds) whereas RS69N prefers anti-conformation. The SMD simulations show that RS194B retains in more stable gauche conformation inside the active gorge of AChE during different time intervals that experiences more hydrogen bonding, hydrophobic interactions with the catalytic anionic site (CAS) residues and weaker interactions with the peripheral anionic site (PAS) residues compared to RS41A and RS69N. In an effort to design an even superior reactivator, RS194B-S has been chosen with a subtle change in the geometry of RS194B by replacing the carbonyl oxygen with the sulfur atom. The newly designed reactivator RS194B-S can also be a promising candidate to reactivate tabun-inhibited AChE.     

First friedel-crafts diacylation of a phenanthrene as the basis for an efficient synthesis of nonracemic

Reported are the first examples of Friedel-Crafts reactions used to prepare 3,6-diacylphenanthrenes. 9,10-Dimethoxyphenanthrene gives its 3,6-diacetyl derivative in good yield and in large amounts. The ketone's triisopropylsilyl enol ether when combined with 1, 4-benzoquinone forms a [7]helicenebisquinone. This bisquinone's reduction product, a bishydroquinone, when combined with methanolic HCl gives the [7]helicene whose peripheral side chains are all methoxyls but whose interior hydroxyls remain. The diastereomeric (1S)-(-)-camphanates can be separated by crystallization. Their structures, analyzed by X-ray diffraction, demonstrate that the camphanates' lactone functions point away from the ring system when the helicene has the (P) configuration and toward it when the helicene has the (M) configuration. This is because the camphanates' O=C-C-O dihedral angles are, as expected, close to 0 degrees in the former and close to 180 degrees in the latter. Other derivatives of 3,6-diacetylphenanthrene and of [7]helicenebisquinone are prepared, and the crystal structure of one of the latter is analyzed.     

Monolithic micro-immobilized-enzyme reactor with human recombinant acetylcholinesterase for on-line inhibition studies

The development and characterization of a human recombinant acetylcholinesterase (hrAChE) micro-immobilized-enzyme reactor (IMER), prepared by using an in situ immobilization procedure is reported. hrAChE was covalently immobilized on an ethylenediamine (EDA) monolithic convective interaction media (CIM) disk (12 mm x 3 mm i.d.), previously derivatized with glutaraldehyde. The optimal conditions for the immobilization were: 12 microg of enzyme dissolved in 800 microl of phosphate buffer (50 mM, pH 6.0). The mixture was gently agitated overnight at 4 degrees C. The resulting Schiff bases were reduced by cyanoborohydride and the remaining aldehydic groups were condensed with monoethanolamine. Under these conditions, 0.22 U of hrAChE were immobilized with retention of 3.0% of the initial enzymatic activity. The activity of the immobilized hrAChE was stable for over 60 days. The activity and kinetic parameters of the hrAChE micro-IMER were investigated by inserting the micro-IMER in a HPLC system and it was demonstrated that the enzyme retained its activity. The micro-IMER was characterized in terms of units of immobilized enzyme and best conditions for immobilization yield. IMERs were compared for their relative enzyme stability, immobilized units, yield and aspecific matrix interactions. The effect of AChE inhibitors was evaluated by the simultaneous injection of each inhibitor with the substrate. The relative IC50 values were found in agreement with those derived by the conventional kinetic spectrophotometric method. In comparison with previously developed AChE-based IMERs, AChE monolithic micro-IMER showed advantages in terms of reduction of analysis time (2 min), lower aspecific matrix interactions and lower backpressure. Included in a HPLC system, it can be used for the rapid screening of new compounds' inhibitory potency. The advantages over the conventional methods are the increased enzyme stability and system automation which allows a large number of compounds to be analyzed in continuous.     

Improvement of acetylcholinesterase-based assay for organophosphates in way of identification by reactivators

Organophosphates present serious fulmination in several aspects of human life. Detection of organophosphates is frequently based on following acetylcholinesterase (AChE) inhibition. Although limit of detection and sensitivity for AChE-based assays seem to be intriguing, the identification of organophosphates is not currently efficient in this way. We introduce an improvement of AChE-based assay by reactivators using a selective come-back of AChE activity after previous inhibition. We have chosen four organophosphates: paraoxon-ethyl, paraoxon-methyl, trichlorfon, methamidophos as representative pesticides and the three most available reactivators: HI-6, obidoxime, pralidoxime. Reactivation was realized in the 96-wells photometric microplates and activity of human recombinant AChE was followed by reaction of Ellman's reagent with one of enzyme digestion product: thiocholine. Distinguishing of reactivation efficacy was judged by the independent two population t-test. The most significant identification was based on methamidophos inhibited AChE reactivation by HI-6 or pralidoxime and paraoxon-ethyl inhibited AChE by obidoxime; moreover, identification of trichlorfon and paraoxon-methyl was possible, too. Practical impact of described method is discussed.     

Micellar electrokinetic chromatography systems for the separation of mixtures of charged and uncharged compounds

In this study, the migration behavior of charged and uncharged analytes was investigated under different conditions. Effective mobilities - electrophoretic mobilities under the influence of micelles - of cations, anions, and neutrals were measured at neutral, basic, and acidic pH (7.5, 11, and 2.2) using background electrolytes containing different sodium dodecyl sulfate (SDS) concentrations (0-90 mM) and acetonitrile (ACN) proportions (0-75%). SDS concentration and ACN proportion were found to have a tremendous effect on the effective mobilities and migration order of the model compounds. Although the SDS micelles preferably interact with neutrals and cations, hydrophobic bonds can also occur with anions. Cations, anions, and neutrals having rather different migration behaviors, it is possible to considerably enhance the selectivity of the method by adjusting properly the SDS concentration and the ACN proportion. These observations confirm the interest of using micellar electrokinetic chromatography not only for the separation of neutral substances but also to analyze charged compounds.     

Preferential partitioning of uncharged local anesthetics into the surface-adsorbed film

The surface tension and pH of aqueous solutions of three hydrochloric acid (HCl) - uncharged anesthetic (mepivacaine (MC), bupibacaine (BC) and dibucaine (DC)) mixtures were measured as a function of total molality and composition of local anesthetic in order to investigate the competitive surface-adsorption of uncharged and charged local anesthetics. The behavior of the surface tension versus total molality and pH versus total molality curves remarkably changed at the composition corresponding to an equimolar mixture. The pH measurements showed that uncharged and charged forms coexisted only at compositions more than the equimolar mixture. The partitioning quantities of respective uncharged and charged anesthetics into the surface-adsorbed film were estimated from their surface densities calculated thermodynamically. The greater quantity of uncharged anesthetics existed in the adsorbed film at the coexisting composition, that is, the uncharged anesthetics adsorbed more preferentially than charged ones. The relative ease with which uncharged anesthetics transferred into the surface-adsorbed film was proportional to the hydrophobicities and well correlated the anesthetic potencies. At compositions in the vicinity of physiological pH (ca. 7.4), the bulk solution is more abundant in charged anesthetics than uncharged ones, whereas the uncharged molecules is conversely more abundant in the surface region. The present results clearly imply that the surface-active molecule of local anesthetic in the physiological pH is the uncharged form and the partitioning is greatly dependent on the hydrophobicity among the anesthetics.     

The effect of polyamidoamine dendrimers on human erythrocyte membrane acetylcholinesterase activity

Polyamidoamine (PAMAM) dendrimers impact on activity of acetylcholinesterase was studied. It has been shown that dendrimers induce a biphasic effect: depending on their concentrations they increase or decrease enzyme activity. It may be due to two types of interactions: direct--between dendrimers and the enzyme; indirect--via a modification of the physical state of membrane phospholipids affecting the acetylcholinesterase.     

First efficient and general copper-catalyzed [2,3]-rearrangement of tetrahydropyridinium ylids

The factors affecting the copper-catalyzed rearrangement of ammonium ylids derived from tetrahydropyridines and diazoesters have been examined,and the first examples of high-yielding metal-catalyzed [2,3]-sigmatropic rearrangements of a wide range of such ylids are reported. The nature of the alpha-substituent in the diazo component of the reaction has a dramatic effect upon the yields of the reaction, with electron-withdrawing substituents enhancing the yield of the reaction. [reaction: see text]     

An uncharged amine in the transition state of the ribosomal peptidyl transfer reaction

The ribosome has an active site comprised of RNA that catalyzes peptide bond formation. To understand how RNA promotes this reaction requires a detailed understanding of the chemical transition state. Here, we report the Br?nsted coefficient of the alpha-amino nucleophile with a series of puromycin derivatives. Both 50S subunit- and 70S ribosome-catalyzed reactions displayed linear free-energy relationships with slopes close to zero under conditions where chemistry is rate limiting. These results indicate that, at the transition state, the nucleophile is neutral in the ribosome-catalyzed reaction, in contrast to the substantial positive charge reported for typical uncatalyzed aminolysis reactions. This suggests that the ribosomal transition state involves deprotonation to a degree commensurate with nitrogen-carbon bond formation. Such a transition state is significantly different from that of uncatalyzed aminolysis reactions in solution.     

First examples of efficient participation of selected metal-ion-substituted heteropolyanions in electrocatalytic nitrate reduction

For the first time, to our knowledge, the electrocatalytic reduction of nitrate is achieved using heteropolyanions. Cu²⁺- and Ni²⁺-containing Dawson-type polyoxometalates proved efficient in this issue. The presence of these substituents seems necessary, in contrast with the observed catalytic reduction of nitrite and nitric oxide for which even non-substituted heteropolyanions were active. With the first series of derivatives, the electrocatalysis is triggered by the electrodeposited copper; Ni²⁺-containing heteropolyanions mimic more closely the catalytic reduction of nitrate by metal ion cyclams and related complexes.     

Existence of a size-dependent diffusivity maximum for uncharged solutes in water and its implications

Recent studies suggest that there exists a size-dependent diffusivity maximum in binary mixtures interacting via Lennard-Jones potential when the size of one of the two components is varied (Ghorai, P. K.; Yashonath, S. J. Phys. Chem., 2005, 109, 5824). We discuss in the present paper the importance of the existence of a size-dependent maximum for an uncharged solute in liquid or amorphous solid water and its relation to the ionic conductivity maximum in water. We report molecular dynamics investigations into the size dependence of the self-diffusivity, D, of the uncharged solutes in water at low temperatures (30 K) with immobile as well as mobile water. We find that a maximum in self-diffusivity exists as a function of the size of solute diffusing within water at low temperatures but not at high temperatures. This is due to the relatively weak interactions between the solute and the water compared to the kinetic energy at room temperature. Previously, we have shown that a similar maximum exists for guests sorbed in zeolites and is known as the levitation effect (LE). Thus, it appears that the existence of a size-dependent maximum is universal and extends from zeolites to simple liquids to solvents of polyatomic species. We examine the implications of this for the size-dependent maximum in ionic conductivity in polar solvents known for over a hundred years. These results support the view that the size-dependent maximum seen for ions in water has its origin in the LE (see Ghorai, P. Kr.; Yashonath, S.; Lynden-Bell, R. M. J. Phys. Chem. 2005, 109, 8120).     

The selectivity of triethylene glycol modified glassy carbon electrode for charged and uncharged pieces

A triethylene glycol modified glassy carbon electrode(TEG–GCE) was fabricated by a controlledpotential electrolysis procedure. The performance of the film on the modified electrode surface was investigated by cyclic voltammetry with different probes. It was firstly found that while neutral pieces could penetrate the TEG film on the GCE surface, the ionic pieces, whatever it is anion or cation, was blocked by the film. This property was successfully used for determining dopamine(DA) in the presence of ascorbic acid(AA) with differential pulse voltammetry(DPV).     

Differences in preparative loadability between the charged and uncharged forms of ionizable compounds

Ionizable compounds experience a drastic difference in preparative loadability as a function of pH. It can be shown that the preparative loadability of a compound in the ionic form is by a factor of 20 or more inferior to the loadability of the same compound in the unionized form. In this paper, we demonstrate the reason for this behavior, and show practical applications of the principle.