Synthesis and self-assembly behavior of four-arm poly(ethylene oxide)-b-poly(2-(diethylamino)ethyl methacrylate) star block copolymer in salt solutions

A well-defined block copolymer consisting of four-arm poly(ethylene oxide)-b-poly(2-(diethylamino)ethyl methacrylate) (four-arm PEO56-b-PDEAEMA74) was synthesized by atom transfer radical polymerization. The pH-responsive self-assembly behavior was examined by potentiometric titration, surface tensiometry, laser light scattering, and transmission electron microscopy over the course of dissociation by the addition of a base or acid. The apparent hydrodynamic radius (Rh) of the micelle increased from 21 to 56 nm when the degree of protonation of the amine groups was increased from 0 to 0.5 in 0.01 M NaCl solution. In higher concentration NaCl solution, the micelle shrank due to the electrostatic charge screening of the protonated DEAEMA groups. At low pH, the micelles dissociated into unimers.     

Dynamic light scattering from non-entangled wormlike micellar solutions

The fuzzy cylinder theory, originally proposed for conventional polymer solutions, was applied to wormlike micellar solutions to take into account effects of the intermicellar collision and hydrodynamic interaction on the self-diffusion of wormlike micelles in solution at finite concentrations. Previously reported apparent hydrodynamic radius data obtained by dynamic light scattering for non-entangled wormlike micelles formed in aqueous solution by non-ionic surfactants, polyoxyethylene monoalkyl ethers C(i)E(j), were analyzed by this theory to estimate the persistence length q of the wormlike micelles. The results of q estimated were consistent with those obtained from radius of gyration data obtained by static light scattering.     

Small-angle X-ray scattering study of photosystem I-detergent complexes: implications for membrane protein crystallization

Small-angle X-ray scattering (SAXS) was used to investigate the structure of isolated photosystem I (PSI) complexes stabilized in detergent solution. Two different types of PSI preparation were investigated. In the first preparation, thylakoid membranes were solubilized with Triton X100 and purified by density gradient centrifugation. SAXS data indicated large scattering objects or microphases that can be described as sheets with approximately 68 A thickness and a virtually infinite lateral extension. The observed thickness agreed well with the dimension of a PSI molecule across the thylakoid membrane. In the second preparation, PSI was isolated as before but was further purified by anion exchange chromatography resulting in functional complexes consisting of single PSI units with attached surfactant as evidenced by the particle volume and gyration radius extracted from the SAXS data. Several approaches were used to model the solution conformation of the complex. Three different ellipsoidal modeling approaches, a uniform density ellipsoid of revolution, a triaxial solid ellipsoid, and a core-shell model, found extended structures with dimensions that were not consistent with the PSI crystal structure (Ben-Shem, A.; et al. Nature 2003, 426, 630-635). Additionally, the SAXS data could not be modeled using the crystal structure embedded in a disk of detergent. The final approach considered the possibility that protein was partially unfolded by the detergent. The data were modeled using a "beads-on-a-string" approach that describes detergent micelles associated with the unfolded polypeptide chains. This model reproduced the position and relative amplitude of a peak present in the SAXS data at 0.16 A(-1) but was not consistent with the data at larger length scales. We conclude that the polypeptide subunits at the periphery of the PSI complex were partially unfolded and associated with detergent micelles while the catalytically active core of the PSI complex remained structurally intact. This interpretation of the solution structure of isolated PSI complexes has broader implications for the investigation of the interactions of detergents and protein, especially for crystallization studies.     

Wormlike micelle formation and flow alignment of a pluronic block copolymer in aqueous solution

The self-assembly into wormlike micelles of a poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) triblock copolymer Pluronic P84 in aqueous salt solution (2 M NaCl) has been studied by rheology, small-angle X-ray and neutron scattering (SAXS/SANS), and light scattering. Measurements of the flow curves by controlled stress rheometry indicated phase separation under flow. SAXS on solutions subjected to capillary flow showed alignment of micelles at intermediate shear rates, although loss of alignment was observed for high shear rates. For dilute solutions, SAXS and static light scattering data on unaligned samples could be superposed over three decades in scattering vector, providing unique information on the wormlike micelle structure over several length scales. SANS data provided information on even shorter length scales, in particular, concerning "blob" scattering from the micelle corona. The data could be modeled based on a system of semiflexible self-avoiding cylinders with a circular cross-section, as described by the wormlike chain model with excluded volume interactions. The micelle structure was compared at two temperatures close to the cloud point (47 degrees C). The micellar radius was found not to vary with temperature in this region, although the contour length increased with increasing temperature, whereas the Kuhn length decreased. These variations result in an increase of the low-concentration radius of gyration with increasing temperature. This was consistent with dynamic light scattering results, and, applying theoretical results from the literature, this is in agreement with an increase in endcap energy due to changes in hydration of the poly(ethylene oxide) blocks as the temperature is increased.     

Self-assembly, hydration, and structures in N-decanoyl-N-methylglucamide aqueous solutions: effect of salt addition and temperature

The influence of NaCl addition and temperature on the self-assembly, hydration, and structures of N-decanoyl-N-methylglucamide (MEGA-10) in dilute solution has been investigated by using several experimental techniques, including tensiometry, steady-state fluorescence, density, viscosity, and static and dynamic light scattering. Tensiometry and fluorescence probe studies, by using pyrene as a probe, were used to obtain the critical micelle concentration (cmc) upon the electrolyte addition. The mean micellar aggregation numbers (N(agg)) as a function of the salt addition were obtained by both static light scattering and static quenching methods. The N(agg) values estimated by both methods were found to be in good agreement. It was found that the increase in the micelle size, produced by the addition of NaCl, is due to the increase in the aggregation number and in the amount of water non-specifically associated to the micelle. On the other hand, we have observed that the aggregation number remains invariant in the temperature range studied, whereas the hydrodynamic radius slightly decreases. The effect of electrolyte addition and temperature on the properties of MEGA-10 micelles is much less pronounced than those observed in the traditionally used POE-based surfactants.     

Self-organization behavior of methacrylate-based amphiphilic di- and triblock copolymers

Amphiphilic di- and triblock copolymers having different hydrophilic-to-hydrophobic block length ratio were synthesized using ATRP. The self-assembly behavior of these AB and ABA block copolymers consisting of poly(n-butyl methacrylate) (B) and poly(2,2-(dimethylaminoethyl methacrylate) (A) was investigated using a combination of dynamic light scattering, negative-stain transmission electron microscopy, cryoelectron microscopy, and atomic force microscopy. Two populations of self-organized structures in aqueous solution, micelles and compound micelles, were detected for diblock copolymers. Triblock copolymers assembled into vesicular structures of uniform sizes. Furthermore it was found that these vesicles tended to compensate the high curvature by additional organization of the polymer chains outside of the membrane. The chain hydrophilicity of the polymers appeared to have a critical impact on the self-assembly response toward temperature change. The self-reorganization of the polymers at different temperatures is discussed.     

疏水缔合聚丙烯酰胺与双子表面活性剂的自组装

通过荧光光谱、动/静态激光光散射研究了疏水缔合聚丙烯酰胺(HAPAM)自组装行为及双子表面活性剂(双十四酸乙二酯双磺酸盐(DMES-14))对其的影响.实验结果表明:聚合物HAPAM在溶液中能够通过自组装形成疏水微区,表现出芘的发射光谱中第一振动峰(373nm)与第三振动峰(383nm)的荧光强度之比(I1/I3)值随聚合物浓度的增大而下降,当聚合物HAPAM浓度(CP)达到一定值后,I1/I3值不再变化;当加入表面活性剂时,HAPAM能够与双子表面活性剂在溶液中形成混合胶束,在聚合物浓度一定时,I1/I3值随表面活性剂浓度(CS)的增大急速下降,当表面活性剂浓度达到30mg·L-1时,I1/I3值趋于恒定;当表面活性剂浓度一定时,聚合物/表面活性剂二元体系中聚集体的聚集数随HAPAM浓度的增大出现先下降再增加的过程;一定量的双子表面活性剂对HAPAM分子间的缔合起促进作用,过量的双子表面活性剂对HAPAM分子间的缔合起抑制作用,使HAPAM的表观重均分子量(Mw,a)、均方根回转半径()和流体力学半径()随表面活性剂浓度增加先增大后减小,而HAPAM的/比值则随表面活性剂浓度增大出现一定程度的上升,表明HAPAM分子链段变得相对舒展.     

Synthesis and Self-Assembly Behaviors of Four-Arm Star Block Copolymers Poly(ϵ-caprolactone)-b-poly(2- (diethylamino) ethyl methacrylate)) in Aqueous Solution

Four-arm star block polymers consisting of hydrophobic poly(?-caprolactone) (PCL) block and hydrophilic poly(2-(diethylamino) ethyl methacrylate)) (PDEAEMA) block were successfully synthesized by ring opening polymerization (ROP) and atom transfer radical polymerization (ATRP). Chain lengths of PDEAEMA segments were varied to obtain a series of star copolymers with different hydrophilic/hydrophobic ratio, which were desired for self-assembly study. Dynamic light scattering (DLS) and transmission electron microscopic (TEM) were used to study their self-assembly behavior. In the PBS solution with different pH value, the star polymers formed micelles or nanoparticles. Furthermore, the morphologies of the micelles were also pH-dependent. Critical micelle concentrations of star copolymers changed from 5.0 to 17.5 mg/L with the increase of hydrophilic block length or the pH decrease. Moreover, a steady increase was found on the micelles diameters when the pH decreased from 7.0 to 3.0. The low CMC value and slight changes on micelle diameter indicated that the micelle remained stable under the changing external stimulus.     

Ordered nanostructures from self-assembly of rod–coil oligomers with n-shaped rod and dendritic poly(ethylene oxide) coil segment

The n-shaped rod–coil molecules consisting of an anthracene unit and two biphenyl groups connected by acetylenyl bonds as a conjugated rod segment and dendritic poly(ethylene oxide)s with different cross-sectional areas were synthesised. These new molecular structures were characterised by using ¹H NMR and MALDI-TOF-MS. The self-assembly of these molecules in the bulk state and in aqueous solution was investigated using differential scanning calorimetry, X-ray diffraction and transmission electron microscopy (TEM). In the bulk state, molecule 1a with a linear coil segment, self-organised into lamellar crystalline structures, whereas molecules 1b and 1c with di- and tetra-branched dendritic wedges did not solidify at room temperature. Dynamic light scattering and TEM experiments reveal that in aqueous solution, the molecules exhibit a strong tendency to organise into the thread-like fibres along the axial direction of cylindrical micelles or into the wide fibroid bundles via the aggregation of cylindrical micelles as the cross-sectional area of the dendritic coil segments increases.     

Quantitative SAXS analysis of oriented 2D hexagonal cylindrical silica mesostructures in thin films obtained from nonionic surfactants

Oriented mesostructured surfactant-silica nanocomposite thin films with a 2D hexagonal mesostructure of cylindrical micelles were prepared by evaporation-induced self-assembly using two different nonionic Brij surfactants and studied by small-angle X-ray scattering in symmetric reflection (SRSAXS) and grazing incidence (GISAXS) geometries. A novel SRSAXS evaluation approach was applied that allowed a good fitting of the SRSAXS data over almost the whole range of scattering vectors. Aside from the cylinder radius and the lattice parameter, the approach provided accurate values for the polydispersity of the micelles, lattice distortions, and preferred orientation. These analyses revealed a significant rise of the micelle radius and accordingly the lattice parameter upon an increase in the ratio surfactant/SiO(2), attributable to a decrease in the solubilization of the poly(ethylene oxide) (PEO) chains by water, in agreement with Monte Carlo simulations. Furthermore, the SRSAXS analysis was successfully applied to the corresponding mesoporous films for the determination of pore sizes.     

Phase diagrams,mechanisms and unique characteristics of alternating-structured polymer self-assembly via simulations

Alternating-structured polymers(ASPs), like alternating copolymers, regular multiblock copolymers and polycondensates, are very important polymer structures with broad applications in photoelectric materials. However, their self-assembly behaviors,especially the self-assembly of alternating copolymers, have not been clearly studied up to now. Meanwhile, the unique characteristics therein have not been systematically disclosed yet by both experiments and theories. Herein, we have performed a systematic simulation study on the self-assembly of ASPs with two coil alternating segments in solution through dissipative particle dynamics(DPD) simulations. Several morphological phase diagrams were constructed as functions of different impact parameters. Diverse self-assemblies were observed, including spherical micelles, micelle networks, worm-like micelles, disklike micelles, multimicelle aggregates, bicontinuous micelles, vesicles, nanotubes and channelized micelles. Furthermore, a morphological evolutionary roadmap for all these self-assemblies was constructed, along with which the detailed molecular packing models and self-assembly mechanisms for each aggregate were disclosed. The ASPs were found to adopt a folded-chain mechanism in the self-assemblies. Finally, the unique characteristics for the self-assembly of alternating copolymers were revealed especially, including(1) ultra-fine and uniform feature sizes of the aggregates;(2) independence of self-assembled structures from molecular weight and molecular weight distribution;(3) ultra-small unimolecular aggregates. We believe the current work is beneficial for understanding the self-assembly of alternating structured polymers in solution and can serve as a guide for the further experiments.     

Cylindrical micelles from the aqueous self-assembly of an amphiphilic poly(ethylene oxide)-b-poly(ferrocenylsilane) (PEO-b-PFS) block copolymer with a metallo-supramolecular linker at the block junction

A supramolecular AB diblock copolymer has been prepared by the sequential self-assembly of terpyridine end-functionalized polymer blocks by using Ru(III)/Ru(II) chemistry. By this synthetic strategy a hydrophobic poly(ferrocenylsilane) (PFS) was attached to a hydrophilic poly(ethylene oxide) (PEO) block to give an amphiphilic metallo-supramolecular diblock copolymer (PEO/PFS block ratio 6:1). This compound was used to form micelles in water that were characterized by a combination of dynamic and static light scattering, transmission electron microscopy, and atomic force microscopy. These complementary techniques showed that the copolymers investigated form rod-like micelles in water; the micelles have a constant diameter but are rather polydisperse in length, and light scattering measurements indicate that they are flexible. Crystallization of the PFS in these micelles was observed by differential scanning calorimetry, and is thought to be the key behind the formation of rod-like structures. The cylindrical micelles can be cleaved into smaller rods whenever the temperature of the solution is increased or they are exposed to ultrasound.     

Synthesis,self-assembly,and pH-responsive drug release of PHMEMA-PEG-PHMEMA ABA triblock copolymers

Abstract

A series of tertiary amine containing PHMEMA-PEG-PHMEMA ABA triblock copolymers were synthesized by atom transfer radical polymerization (ATRP) using bromine-capped poly(ethylene glycol) (Br-PEG-Br) and 2-(hexamethyleneimino)ethyl methacrylate (HMEMA) as macro-initiator and monomers, respectively. The chemical structures and molecular weights of triblock copolymers were characterized by ¹H NMR and gel permeation chromatography (GPC). The self-assembly behaviors of copolymers in different pH conditions were studied by dynamic light scattering (DLS) and transmission electron microscopy (TEM). Triblock copolymers self-assembled into micelles in water (pH 7.4) and the micelles disassembled at acidic pH (pH 5.0). Anticancer drug doxorubicin (DOX) was used as a drug model and physically encapsulated into polymeric micelles. The drug release of DOX-loaded polymeric micelles was pH-responsive; the drug-loaded micelles that had higher contents of tertiary amine in polymer pendant groups showed faster release speed. In addition, the drug-loaded micelles showed excellent inhibition efficacy against HeLa cells in vitro.     

Influence of the macromolecular architecture on the self-assembly of amphiphilic copolymers based on poly(N,N-dimethylamino-2-ethyl methacrylate) and poly(epsilon-caprolactone)

The self-assembly of amphiphilic copolymers consisting of poly( N, N-dimethylamino-2-ethyl methacrylate) (PDMAEMA) and poly(-caprolactone) (PCL) segments arranged in graft and linear diblock architectures was investigated in this work by means of dynamic light scattering (DLS) in aqueous solution and by atomic force microscopy (AFM) on thin deposits. The solid-state deposits of the micelles were generated by a "freeze-drying" technique that preserves the initial micelle morphology in solution. A comparison between the morphological properties of graft copolymers with corresponding diblock copolymers was established to demonstrate the effect of the copolymer architecture on the micelle structure and organization.     

疏水缔合聚丙烯酰胺在盐水中的自组装行为

使用静态光散射、动态光散射以及原子力显微镜(AFM)研究了疏水缔合聚丙烯酰胺(HAPAM)在盐水溶液中的自组装行为.研究了聚合物分子在不同盐浓度中的表观重均分子量(Mw,a),均方根回转半径(),流体力学半径(),第二维里系数(A2)的变化,并根据/的比值得出聚合物分子的聚集形态.实验结果表明:随着盐浓度的增强,聚合物溶液的分子链由舒展变得卷曲.     

Micelles of SDS Surfactants in Concentrated NaCl Solutions

We investigated the aggregation behavior of rod-like micelles of sodium dodecyl sulfate (SDS) in concentrated NaCl solution by quasi-elastic light scattering (QLS) and viscosity measurement over a range of temperature (25 °C to 50 °C) and NaCl concentration. The reduced viscosity of aqueous SDS in the presence of NaCl has been measured by an Ubbelohde-type capillary viscometer. We show mean hydrodynamic radius of micelles can be determined from viscosity data. We also determined mean hydrodynamic radius using quasi-elastic light scattering. Micellar size decreases with increasing temperature, whereas it increases with increasing ionic strength. The results of viscosity and dynamic light-scattering measurements are interpreted as the extension of length of rod-like micelles. We compare viscosity and light scattering experimental results.     

Morphology transformation of hybrid micelles self-assembled from rod-coil block copolymer and nanoparticles

Hybrid polymeric micelles self-assembled from a mixture containing poly(γ-benzyl-L-glutamate)-block-poly(ethylene glycol) (PBLG-b-PEG) block copolymer and gold nanoparticles (AuNPs) were prepared. The effect of AuNPs on the self-assembly behavior of PBLG-b-PEG was studied both experimentally by transmission electron microscopy, scanning electron microscopy, and laser light scattering and computationally using dissipative particle dynamics (DPD) simulations. It was found that, the pure PBLG-b-PEG block copolymer self-assembles into long cylindrical micelles. By introducing AuNPs to the stock block copolymer solution, the formed aggregate morphology transforms to spherical micelles. The DPD simulation results well reproduced the morphological transformations observed in the experiments. And the simulation revealed that the main reason for the aggregate morphology transformation is the breakage of ordered packing of PBLG rods in micelle core by the added nanoparticles. Moreover, from the DPD simulations, the distribution information on nanoparticles was obtained. The nanoparticles were found to prefer to locate near the core/shell interface as well as in the core center of the micelles. The combination of experimental and simulation methods lead to a comprehensive understanding of such a complex self-assembly system.     

Self-assembly of hydrophobin and hydrophobin/surfactant mixtures in aqueous solution

The self-assembly of the protein hydrophobin, HFBII, and its self-assembly with cationic, anionic, and nonionic surfactants hexadecylterimethyl ammonium bromide, CTAB, sodium dodecyl sulfate, SDS, and hexaethylene monododecyl ether, C(12)E(6), in aqueous solution have been studied by small-angle neutron scattering, SANS. HFBII self-assembles in solution as small globular aggregates, consistent with the formation of trimers or tetramers. Its self-assembly is not substantially affected by the pH or electrolytes. In the presence of CTAB, SDS, or C(12)E(6), HFBII/surfactant complexes are formed. The structure of the HFBII/surfactant complexes has been identified using contrast variation and is in the form of HFBII molecules bound to the outer surface of globular surfactant micelles. The binding of HFBII decreases the surfactant micelle aggregation number for increasing HFBII concentration in solution, and the number of hydrophobin molecules bound/micelle increases.     

Patchy worm-like micelles: solution structure studied by small-angle neutron scattering

Triblock terpolymers exhibit a rich self-organization behavior including the formation of fascinating cylindrical core-shell structures with a phase separated corona. After crystallization-induced self-assembly of polystyrene-block-polyethylene-block-poly(methyl methacrylate) triblock terpolymers (abbreviated as SEMs = Styrene-Ethylene-Methacrylates) from solution, worm-like core-shell micelles with a patchy corona of polystyrene and poly(methyl methacrylate) were observed by transmission electron microscopy. However, the solution structure is still a matter of debate. Here, we present a method to distinguish in situ between a Janus-type (two faced) and a patchy (multiple compartments) configuration of the corona. To discriminate between both models the scattering intensity must be determined mainly by one corona compartment. Contrast variation in small-angle neutron scattering enables us to focus on one compartment of the worm-like micelles. The results validate the existence of the patchy structure also in solution.     

Self-Assembling Behavior of Polyglyceryl-Modified Silicone Surfactant in Aqueous Solution

We report interesting self-assembly behavior of a polyglyceryl-modified silicone surfactant in the aqueous solution; the sample has been characterized through measurements of surface tension, transmission electron microscopy (TEM), dynamic light scattering (DLS), and small-angle x-ray scattering (SAXS). Aqueous solutions of this surfactant had a low critical aggregation concentration (CAC) and surface tension (21.5 mN · m^?1), substantially lower than those reported for polyether-modified silicone surfactants with a similar molecular architecture. DLS and TEM revealed self-assembled spherical micelles with a narrow size distribution. At higher concentrations (10 wt%), linear packing of micelles was observed, while the micelle size distribution remained similar (50–90 nm). SAXS data could be fitted through the use of a core–shell model and implied that the core radius remained roughly 4.3–6.0 nm for all solutions of the surfactant analyzed. The origin of its curious aggregates behavior is attributed to hydrogen bonding, steric effects, and the directionality of bond angle from the polyglyceryl block of this novel class of silicone surfactant. This type of surfactant coupling lipophilic segments assembles the cores of the micelles in water which may find positive factors for potential applications such as microreaction compartmentalization.