Water-dispersible carbon nanotubes from a mixture of an ethoxy-modified trisiloxane and pluronic block copolymer F127

The ability of a mixture of an ethoxy-modified trisiloxane (a silicone surfactant, named Ag-64) and a block copolymer F127 to disperse carbon nanotubes (CNTs) was investigated by experimental investigation and molecular dynamics simulation. Dispersions with large amounts of individual CNTs were obtained. The quantity of dispersed CNTs was obviously larger than each quantity of the dispersions with individual surfactants at the same concentration, even exceeded the sum of them. The mechanism of dispersing CNTs was also discussed. It can be inferred that Ag-64 and few F127 could wrap onto the surface of CNTs to dispart clusters to individuals, and the other F127 interact with adsorbed Ag-64 and F127 to generate stronger steric stabilization. Thus, a synergistic effect on dispersing CNTs by the mixture of Ag-64 and F127 was observed.     

Studies on the Interactions Between Genistein and Copolymer F127

In this paper, the interactions of an isoflavone molecule, Genistein (Gen), with Pluronic F127 at different pH values have been investigated using laser light scattering techniques, film analysis methods, UV-vis spectroscopy and transmission electron microscopy. The TEM images and the DSL studies indicate the formation of a Gen/F127 complex induced by the solubilization of Gen in micelles, and the stability of the Gen/F127 complex decreases with the increase of pH. At pH of 6.4, the turbidity of the Gen/F127 complex solution is significantly reduced in the presence of 0.31 mol⋅L⁻¹ ethylene glycol, indicating the existence of hydrogen bonds between Gen and the F127 copolymer. Experiments on controlled release demonstrate that Gen-loaded F127 micelles act as a drug carrier, giving slow release to the surrounding solution over a period of time. Rapid release can be triggered by increasing the pH of the micelle solutions     

Molecular dynamics simulation on the interaction between polymer inhibitors and anhydrite surface

Investigation on the microscopic interaction between polymer inhibitors and calcium sulfate will be helpful for understanding its scale inhibition mechanism and can provide a theoretical guidance to developing new scale inhibitors. In this work, molecular dynamics simulations with COMPASS force field have been performed to simulate the interaction between hydrolyzed polymaleic anhydride (HPMA), polyaspartic acid (PASP), polyepoxysuccinic acid (PESA), polyacrylic acid (PAA) and the (001) and (020) surfaces of anhydrite (AD) crystal with and without water. The results show that the sequence of binding energies between four polymer inhibitors and AD (001) and (020) with water is PESA > PASP > HPMA > PAA. The binding energy of the same polymer inhibitor on AD (001) is smaller than that on AD (020). Water molecules weaken the deformations of HPMA and PAA but aggravate those of PASP and PESA. Natural bond orbital (NBO) charges of the repeat units of polymer inhibitors were calculated by B3LYP/6‐31G* method. The Coulomb interaction is formed between the O atoms of polymer inhibitors and the Ca atoms of AD crystal. The system of polymer–AD is mainly contributed from the non‐bonding interaction. Polymer inhibitors do not interact directly with AD crystal, but indirectly through the interactions between inhibitor–H₂O and H₂O–AD, i.e. water molecules participate in scale inhibition of polymer inhibitors to AD crystal. Water molecules cannot be ignored when the interaction models are constructed, i.e. solvent effect cannot be ignored. Copyright © 2015 John Wiley & Sons, Ltd.     

F127反相微乳液的组成对AgCl纳米粒子形成及AgCl/F127-PMMA杂化膜结构和性能的影响

以F127为表面活性剂构成的反相微乳液制备AgCl纳米粒子和AgCl/F127-PMMA杂化膜,通过紫外可见光谱(UV-visible)、透射电镜(TEM)研究了微乳液的增容水量(ω)和盐浓度(Csalt)对AgCl粒子形成与形貌的影响;结合表面ζ电位测定、扫描电镜(SEM)分析和溶胀实验等考察了AgCl/F127-PMMA杂化膜的结构和性能。研究结果表明,低ω下盐浓度增加,胶束中AgCl反应速率增大,导致大量小粒径AgCl粒子的形成;高ω下盐浓度增加,将加快AgCl粒子的生长,从而导致胶束中的AgCl粒子粒径增大;各种ω下盐浓度的增加,都会引起胶束中单质Ag的形成。杂化膜的SEM分析显示,AgCl粒子粒径越小,在杂化膜中的分散性越好,膜表面的ζ电位也越高,膜在苯中的溶胀性能也越高;单质Ag的出现和AgCl粒子数目的增多,杂化膜中将显现明显的粒子团聚现象,这极大地影响了杂化膜在苯中的溶胀性能;而杂化膜在环己烷中的溶胀性能较低,且随ω和盐浓度的变化极小。     

Molecular simulation studies on the interaction between different polymers in aqueous solution

A molecular dynamics simulation was performed to investigate the aggregates of mixing and the interaction between different polymers in aqueous solution. These polymers include partially hydrolyzed polyacryamide (HPAM), hydroxyethylcellulose (HEC) and polyvinylpyrrolidone (PVP). The structures of mixed aggregates were analyzed from the dihedral angle distribution of: (1) pure HPAM; (2) HPAM in aqueous solution; (3) HPAM with small segments of PVP or HEC in aqueous solution. At the same time, the simulated IR spectra and the calculated interaction parameters were used to distinguish the different interactions between HPAM and PVP or HEC. In order to confirm the validity of the simulated predictions, experimental IR spectra of polymer systems were made, and the specific viscosity of the HPAM and PVP or HEC system was measured using capillary viscometry. It can be seen from the viscosity measurements that the viscosity of the HPAM/PVP system in aqueous solution decreases linearly with an increase in concentration of PVP, whereas a maximum viscosity value appears with the increase in concentration of HEC in the HPAM/HEC system. The conclusion was drawn that the interaction between HPAM and HEC is stronger than the one between HPAM and PVP, and that molecular simulation can be considered as an adjunct to experiments and can provide otherwise inaccessible (or, not easily accessible) microscopic information that experimentalists can use.     

泊洛沙姆F127和丹皮酚对GMO液晶相变的影响

对GMO/H₂O, GMO/F-127/H₂O和GMO/paeonol/H₂O三种体系的液晶特性进行了考察, 结合粘度及偏光纹理绘制相图, 运用“drying”方法的原理鉴别了反相胶束和立方相液晶, 并采用临界堆积参数p值理论探讨水溶性和脂溶性物质引起液晶相变的机理. 结果表明水溶性泊洛沙姆F127可使层状液晶区域变宽, 立方相液晶区域变窄|脂溶性丹皮酚可使层状液晶和立方相液晶区域变窄, 反相六角相液晶变宽. 本研究通过对单油酸甘油酯(GMO)液晶特征的研究, 为其作为载体的应用提供了理论基础.     

Interaction between Pluronic F127 and dioctadecyldimethylammonium bromide (DODAB) vesicles studied by differential scanning calorimetry

A number of fundamental studies on the interactions between lipid bilayers and (ethylene oxide)-b-(propylene oxide)-b-(ethylene oxide) copolymers (PEO-PPO-PEO, Pluronics) have been carried out recently as model systems for the complex behavior of cell membranes with this class of polymers often employed in pharmaceutical formulations. We report here a study by differential scanning calorimetry (DSC) of the interactions in water between Pluronic F127 (F127), and the cationic vesicles of di-n-octadecyldimethylammonium bromide (DODAB), as a function of concentration of the two components (DODAB 0.1 and 1.0 mM; F127 0.1 to 5.0 mM) and of the sample preparation protocol. The DSC studies follow the critical micellization temperature (cmt ≈ 27 °C at 1.0 mM) of F127 and the gel-liquid crystal transition (T(m) ≈ 45 °C) of the DODAB bilayer and of F127/DODAB mixtures. Upon heating past T(m), vesicle/polymer mixtures undergo an irreversible conversion into mixed DODAB/F127 micelles and/or F127-bearing vesicles, depending on the relative amount of each component, together with, in some cases, residual intact F127 micelles or DODAB vesicles. Sample preparation protocol is shown to have little impact on the composition of mixed systems once they are heated above T(m).     

Synthesis and characterization of amphiphilic fluorinated pentablock copolymers based on Pluronic F127

The synthesis and self‐assembly behavior of pentablock copolymers consisting of Pluronic F127 (PEO₁₀₀‐PPO₆₅‐PEO₁₀₀) and poly(2, 2, 3, 3, 4, 4, 5, 5‐octafluoropentyl methacrylate) (POFPMA) is herein described. Using the difunctional potassium alcoholate of F127, K⁺O^–‐(PEO₁₀₀‐PPO₆₅‐PEO₁₀₀)‐O^–K⁺, as the macroinitiator, the POFPMA‐F127‐POFPMA pentablock copolymers were synthesized via oxyanion‐initiated polymerization. The chain length of POFPMA can be controlled by the original molar ratio of macroinitiator to OFPMA monomer, that is, F‐monomer. The composition and chemical structure of POFPMA‐F127‐POFPMA pentablock copolymers have been characterized by FTIR, ¹HNMR, and ¹⁹F NMR spectroscopy, and gel permeation chromatography techniques. The solution behavior of POFPMA‐F127‐POFPMA copolymers was investigated by the methods of surface tension, cloud point, transmission electron microscopy, and high performance particle sizer (HPPS). The results indicate that these Pluronic F127‐based block copolymers modified with fluorinated segments possess relatively high surface activity and low cloud points, depending on various factors, such as the length of fluorinated block, the concentration of the copolymers in aqueous solution, and the adscititious inorganic salt. TEM measurements showed that the pentablock copolymers can self‐assemble in aqueous solution to form various micellar morphologies. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 3029–3041, 2008     

A novel intramolecular through-space interaction between F and CN: a strategy for the conformational control of an acyclic system

X-Ray crystallographic analyses of fluorocyanides anti-1 and 2 revealed a novel intramolecular through-space interaction between F and CN in an acyclic system, which was applied to a stereoselective protonation of acyclic fluorocyanides 2 having flexible conformation.     

Molecular dynamics simulation study of the water-mediated interaction between zwitterionic and charged surfaces

We calculated the potential of mean force (PMF) for the interaction between a model zwitterionic bilayer and a model charged bilayer. To understand the role of water, we separated the PMF into two components: one due to direct interaction and the other due to water-mediated interaction. In our calculations, we observed that water-mediated interaction is attractive at larger distances and repulsive at shorter. The calculation of the entropic and enthalpic contributions to the solvent-mediated components of the PMF showed that attraction is entropically dominant, while repulsion is dominated by the enthalpy.     

Effect of Pluronic F127 on the pore structure of macrocellular biodegradable polylactide foams

Thermally induced phase separation technique was utilized to fabricate biodegradable poly(l ‐lactic acid) (PLLA) macrocellular foams which were capable of being applied in tissue engineering. The block copolymer Pluronic F127 composed of (polyethyleneoxide)‐(polypropyleneoxide)‐(polyethyleneoxide) [(PEO)‐(PPO)‐(PEO)] was used as a porogen. Water/dioxane mixtures with different volume ratios were used as solvents. The addition of Pluronic F127 could induce an appearance of large pores (50–200 μm) besides small pores (10–20 μm) or a change from a solid–liquid phase separation to a liquid–liquid phase separation. The role of Pluronic F127 depends on the water/dioxane ratios in the PLLA/dioxane/water system. The X‐ray diffraction patterns and porosity measurement results showed that Pluronic F127 was crystallized and existed on the pore wall. The effect of Pluronic F127 on changing pore structure is attributed to the occurrence of the interaction of the lipophilic PPO blocks in Pluronic F127 with PLLA clews, consequently, this results in PLLA aggregation and early phase separation on cooling. Copyright © 2004 John Wiley & Sons, Ltd.     

Electrostatic interaction between an ion-penetrable sphere and an ion-impenetrable sphere

The exact expression for the electrostatic interaction between an ionpenetrable sphere and an ion-impenetrable rigid sphere is derived on the basis of the linearized Poisson-Boltzmann equation without recourse to Derjaguin's approximation.     

Formation and microstructure transition of F127/TX-100 complex

Formation and structure transition of the complex composed of triblock copolymer F127 and nonionic surfactant TX-100 have been investigated by 1H NMR spectroscopy, dynamic light scattering (DLS), and isothermal titration calorimetry (ITC). Three TX-100 concentration regions are identified, within which TX-100/20 mg/mL F127 complex undergoes different temperature-induced structure transitions. In low concentration region (< 9.42 mM), F127 single molecular species (unimers) wrap around TX-100 micelles forming F127/TX-100 complex with TX-100 micelle as the skeleton at a lower temperature (5 degrees C), and the skeleton transfers to F127 micelle at higher temperature (40 degrees C); in intermediate TX-100 concentration region (9.42-94.85 mM), the skeleton of F127/TX-100 complex transfers from TX-100 micelle successively into F127 micelle and TX-100 micelle again upon heating. The interaction of F127 with TX-100 is saturated in high TX-100 concentration region (> 157.57 mM), and free TX-100 micelles coexist with larger clusters of F127/TX-100 complexes. In addition, TX-100-induced F127/TX-100 complex formation and structure transition are also investigated at constant temperatures. The results show that within 5-10 degrees C, F127 unimers mainly adsorb on the surface of TX-100 micelles just like normal water soluble polymers; in the temperature region of 15-25 degrees C, TX-100 micelles prompts F127 micelle formation. Within 30-40 degrees C, TX-100 inserts into F127 micelles leading to the breakdown of F127 aggregates at higher TX-100 concentrations, and the obtained unimers thread through TX-100 micelles forming complex with TX-100 micelle as skeleton.     

Molecular dynamics simulation of the interaction between methyl benzotriazole and Cu2O crystal

In circulating water system , methyl benzotriazole (TTA) is one of the common corrosion inhibitors for copper. But the inhibition mechanisms have not been clearly understood so far. In different number of water molecules, the interaction between TTA and Cu₂O (copper surface) was investigated with molecular dynamics (MD) method. The results showed that the MD simulation result with water was more consistent with the experiment results. In different number of water molecules, the sequence of the interaction energies between TTA and Cu₂O (001) was ? E ₁ (150H₂O) > ? E ₁(200H₂O) > ? E ₁(100H₂O) > ? E ₁(50H₂O) > ? E ₁(0H₂O). The number of water molecules had an important influence on the interaction between corrosion inhibitors and Cu₂O crystal. From non‐bond energy and pair correlation functions, the interaction energies of the model system were mainly contributed by the non‐bond interaction. Strong adsorption could be raised by the Coulomb interaction between the negatively charged functional groups in TTA and the positive copper ions in the Cu₂O (001) face, and further interaction between aggressive media and copper could be restricted. So, copper corrosion could be avoided. Chemical bonds and non‐bond interactions were formed between TTA and Cu₂O (001) in different number of water molecules. Water molecules could not be ignored during the MD simulation, too. The results obtained here may provide theoretical supports for developing new corrosion inhibitors.     

Experimental and theoretical study of the gas-phase interaction between ionized nitrile sulfides and pyridine

The gas-phase reactivity of ionized nitrile sulfides, R-C≡N⁺-S^·, towards neutral pyridine was studied both experimentally (six sector hybrid mass spectrometer) and theoretically (density functional theory and Møller-Plesset ab initio calculations). An ionized sulfur atom transfer and a cycloaddition process respectively yielding ionized pyridine N-thioxide and a thiazolopyridinium cation were observed. Whereas the very efficient S^·+ transfer reaction probably involves the intermediacy of several ion-molecule complexes, the thiazolopyridinium ion formation is likely to be initiated by an electrophilic attack of the R-C≡N⁺-S^· ion on the nitrogen atom of pyridine; the resulting intermediate then undergo an intramolecular substitution of an α-hydrogen atom by the sulfur atom.     

Microstructure transition of hydrophilic modified ibuprofen and Pluronic copolymer F127 complexes

The effect of the aggregation state of Pluronic copolymer (PEO₁₀₀–PPO₆₅–PEO₁₀₀, F127) and the concentration of hydrophilic modified ibuprofen (Ibuprofen–PEG800, IP800) on the interaction between F127 and IP800 was systematically investigated by nuclear magnetic resonance, dynamic light scatter (DLS), surface tension, and freeze-fractured transmission electron microscopy. In the solution of F127 unimers (5 °C), F127 unimers tended to wrap around IP800 micelles, and the binding model of F127 unimers to IP800 micelles transferred from wrapping around to partly threading through with increasing IP800 concentration. The latter binding model was straightly confirmed by nuclear Overhauser enhancement spectroscopy. As the aggregation state of F127 is in the beginning of the micellization (20 °C), the addition of IP800 significantly promoted the micellization of F127 to form the F127/IP800 complex with F127 micelles as the skeleton called the F127–micelle complex. The sudden decrease of the size obtained from DLS stemmed from the disruption of the F127–micelle complex and accompanying rehydration of PPO which is weaker compared with refs. The amount of IP800 to disintegrate the F127–micelle complex increased in the F127–micelle-dominated solution (40 °C) compared to that at 20 °C.     

Sertaconazole-HPβCD-pluronic F127 solid inclusion complexes: characterization and effect on drug solubility

The influence of Pluronic^® F127 (PF127) on hydroxypropyl-β-cyclodextrin (HP-βCD) complexation in solid state with sertaconazole, a highly active but poorly soluble antifungal drug, and its repercussion on drug solubilization and release rate were evaluated. Solid ternary systems comprising sertaconazole: HP-βCD:PF127 were obtained by (i) kneading of blends wetted with methanol:phosphate buffer; (ii) freeze-drying of filtered suspensions; and (iii) cast of films of filtered suspensions in an oven at 37°C. Two levels of PF127 concentrations were evaluated, one below (0.1%) and other above (5%) the critical micellar concentration (CMC). Physical mixtures were used as references. Differential scanning calorimetry, Raman spectroscopy and X-ray difractometry showed that PF127 did not significantly interfere in the complexation process, as confirmed by the total amount of sertaconazole nitrate (SN) dissolved. Nevertheless, the presence of 5% PF127 significantly delayed the release owing to its ability to form a gel layer. These ternary systems are potentially useful to combine drug solubilization ability with control of drug release.     

Deuterium isotope effects on the interaction between hyperbranched polyethylene imine and an anionic surfactant

Solvent isotope effects on the interaction between the hyperbranched cationic polyelectrolyte, polyethylene imine (PEI), and the anionic surfactant sodium dodecyl sulfate (SDS) were investigated using potentiometric titration and eletrophoretic mobility measurements. In the basic pH range, a significantly higher fraction of the amine groups was found to be protonated when the PEI was dissolved in D2O compared to H2O at the same pH/pD. The difference in polymer charge in the two solvents decreases gradually with decreasing pH, and it completely diminishes at around pH = 4. Electrophoretic mobility measurements of PEI/SDS complexes at different pH values correlated very well with these observations. At pH/pD approximately 9 a much higher mobility of the PEI/SDS complexes was found in D2O than in H2O at low surfactant concentrations, and the charge neutralization point shifted to a considerably larger surfactant concentration in heavy water. These results can be explained by the significantly higher charge density of the PEI in D2O compared to H2O. However, at the natural pH/pD as well as at pH = 4 and pD = 4 conditions the PEI molecules have roughly equal charge densities, which result in very similar charged characteristics (mobilities) of the PEI/SDS complexes as well as the same charge neutralization SDS concentration. It can be concluded that extreme care must be taken in the general analysis of those experiments in which weak polyelectrolyte/surfactant aggregates are investigated in heavy water, and then these observations are correlated with structures of the same system in water.