聚丙烯酰胺水溶液的流变性质

粘性指进现象;聚丙烯酰胺水溶液的流变性质     

极低剪切速率下聚丙烯酰胺溶液在毛细管中的流变特性 Ⅱ.毛细管尺寸和盐浓度对流变性能的影响

流变性能;流变行为;极低剪切速率下聚丙烯酰胺溶液在毛细管中的流变特性 Ⅱ.毛细管尺寸和盐浓度对流变性能的影响     

二茂铁接枝聚丙烯酰胺水溶液的流变行为研究

采用“Post-Modification”技术在二甲基亚砜中直接对聚丙烯酰胺进行烷基化反应,接枝二茂铁官能团(Fc),制备出一种具有氧化还原性质的二茂铁改性聚丙烯酰胺(PAM-Fc).通过红外光谱(FTIR)、核磁氢谱(1H-NMR)、热失重(TGA)、电化学、动态流变测试等方法对PAM-Fc的化学结构、电化学活性和流变特性进行了表征.研究结果表明,PAM-Fc具有氧化还原性,相比PAM呈现更好的热稳定性,这主要源于Fc基团稳定了PAM分子链的自由基.Fc基团在水溶液中的疏水缔合作用会导致体系黏度显著增大.通过添加NaCl、β-环糊精或H2O2等可以对PAM-Fc水溶液的黏度进行有效调控.其中,NaCl可以屏蔽PAM-Fc分子链上的电荷,β-环糊精能够包合Fc基团,H2O2则可将疏水的还原态Fc基团氧化成亲水的氧化态Fc,从而实现PAM-Fc水溶液流变行为的调节.     

疏水缔合聚丙烯酰胺在表面活性单体胶束溶液中的制备及其流变特性

配制了表面活性单体2-丙烯酰胺基十二烷磺酸钠(NaAMC12S)与十二烷基硫酸钠(SDS)的胶束溶液,分别测定了强疏水单体N-正十二烷基丙烯酰胺(C12AM)在两种胶束溶液中的增溶性能;在此基础上,于两种胶束溶液中分别进行了丙烯酰胺(AM)与C12AM的胶束共聚合,制备了疏水缔合聚丙烯酰胺(HAPAM),它们分别为二元共聚物C12AM/AM与三元共聚物C12AM/NaAMC12S/AM;测定了两种共聚物的红外光谱;采用荧光探针法与表观粘度法重点研究了它们的疏水缔合性与流变性能.结果表明,在表面活性单体NaAMC12S的胶束溶液中,可顺利地实现AM与疏水单体的胶束共聚合,由于表面活性单体也参与了共聚合,故制得的产物为三元共聚物C12AM/NaAMC12S/AM;与在SDS胶束溶液中制备的二元共聚物C12AM/AM相比,前者的疏水缔合性更强,其强疏水缔合性以强疏水单体C12AM的贡献为主,以表面活性单体NaAMC12S的贡献为辅.     

阳离子聚丙烯酰胺的重要研究技术进展

聚丙烯酰胺(PAM)在许多领域均得到了广泛的应用,而其中很重要的一部分——阳离子聚丙烯酰胺(CPAM)在日常生活和工业生产中,特别是在污水处理中所发挥的作用则尤为显著。本文综合论述了阳离子聚丙烯酰胺的主要用途和作用机理,重点列举了几种较为热门的阳离子聚丙烯酰胺合成技术的特点和研究进展,展示了阳离子聚丙烯酰胺的国内外研究进展,并对国内阳离子聚丙烯酰胺的今后发展进行了展望,为日后对阳离子聚丙烯酰胺的进一步开发研究提供重要参考和依据。     

不同结构驱油聚合物的界面剪切流变性质

利用双锥法研究了油田现场用超高分子量部分水解聚丙烯酰胺(PHPAM)和疏水改性聚丙烯酰胺(HMPAM)溶液与航空煤油间的界面剪切流变性质,考察了时间、应变幅度和剪切频率对不同浓度PHPAM和HMPAM溶液界面剪切流变参数的影响.结果表明,只有在适宜的剪切频率条件下,流变数据才能反映界面膜的结构信息.HMPAM分子具有界面活性,能吸附在界面上,其界面膜的强度随时间变化逐渐增强,且在高浓度时以黏性为主;PHPAM分子不具有界面活性,其剪切流变参数没有时间依赖性,界面层以弹性为主.HMPAM能通过疏水作用形成界面网络结构,界面膜的剪切复合模量明显高于PHPAM界面层.HMPAM界面层中网络结构在剪切形变作用下的破坏与重组这一慢弛豫过程是其强度较高的原因.     

疏水缔合效应对聚丙烯酰胺类水溶液结构和流变性质的影响

以聚合物驱油为背景,研究了部分水解聚丙烯酰胺(HPAM)和缔合型部分水解聚丙烯酰胺(AHPAM)水溶液的结构与流变性质的差别.通过粘度法和静态激光光散射法得到了所分析的聚丙烯酰胺的分子量,用动态激光光散射法和粘度法分析了特定AHPAM分子缔合形态,并用流变学法测定了AHPAM在地层温度与矿化度条件下的线性粘弹性与非线性流变特性.着重讨论了临界缔合浓度的概念,研究了结构和流变性质的关系,以及分析了缔合对聚合物驱油的可能影响.实验结果表明,AHPAM水溶液在宽浓度范围存在分子缔合;一般临界缔合浓度的概念实际反映在进入亚浓溶液范围分子间缔合的效应,剪切速率约为10 s-1时,剪切粘度突降数倍,反映缔合结构在剪切场中的变化,该现象在高缠结浓度下较不明显;拉伸粘度随拉伸速率变化与HPAM定性不同,该拉伸特性反映了疏水缔合近程作用的本质.     

聚丙烯酰胺对烷基苯磺酸盐界面吸附膜扩张流变性质的影响

采用小幅低频振荡和界面张力弛豫技术, 研究了部分水解聚丙烯酰胺(Mo-4000)和阴离子表面活性剂2-丙基-4,5-二庚基苯磺酸钠(377)体系在癸烷/水界面上的扩张黏弹性质, 并考察了电解质对体系界面流变性质的影响. 研究结果发现, 低表面活性剂浓度时, 聚合物的加入大大降低了扩张模量; 而高表面活性剂浓度时, 聚合物的存在导致了界面膜更接近弹性膜. 一方面电解质压缩双电层, 增加界面膜的紧密程度, 造成高频条件下扩张模量增大; 另一方面, 电解质增强表面活性剂分子在界面与体相间的扩散交换作用, 增大了扩张模量的频率依赖性, 造成低频条件下扩张模量降低.     

医用聚丙烯酰胺水凝胶理化性能测试

测试了医用聚丙烯酰胺水凝胶产品的pH值、折射率、重金属含量、红外光谱、化学热稳定性和丙烯酰胺单体残留量等主要理化性能，重点研究了样品中残留单体丙烯酰胺的高效液相色谱分析法。     

疏水改性聚丙烯酰胺对原油组分界面扩张流变性质的影响

利用悬挂滴方法研究了疏水改性聚丙烯酰胺(HMPAM)对胜利采油厂高温高盐油藏采出原油中酸性活性组分和沥青质界面膜扩张流变性质的影响,考察了不同活性组分浓度条件下的界面扩张流变行为.实验结果表明:1750mg·L-1HMPAM能够在界面上形成网络结构,界面扩张模量数值高达100mN·m-1左右;油相中的酸性组分随着老化时间增加吸附到界面上,与HMPAM分子的疏水改性部分形成聚集结构,一方面通过快速的扩散交换过程大大降低扩张模量,另一方面通过与疏水改性部分的相互作用加强HMPAM分子间的缔合强度,增强网络结构的弹性.沥青质分子尺寸相对较大,分子间存在氢键等较强的相互作用,造成沥青质界面聚集体和HMPAM形成的网络结构共同决定界面膜性质,混合膜的扩张模量较单独HMPAM体系仅略有降低.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.