Magnetic field-induced reactions on the surface of chloroaluminum phthalocyanine thin films

The μ-(oxo)bis[phthalocyaninato] aluminum(III) (AlPc)(2)O films, with the crystallites oriented preferably in one direction, were obtained via chemical transformation of chloroaluminum(III) phthalocyanine AlClPc film upon its annealing in magnetic field. A comparative analysis of the influence of postdeposition annealing without and under applied magnetic field of 1 T on composition and morphology of AlClPc films has been carried out. The chemical transformation of AlClPc to (AlPc)(2)O on the substrate surface is studied by the methods of UV-vis and infrared spectroscopies, Raman, x-ray photoelectron spectroscopy as well as atomic force microscopy. Two interesting effects were observed upon heating the AlClPc films in magnetic field of 1 T. First, the temperature of the chemical transformation of AlClPc to (AlPc)(2)O decreased from 300 °C to 200 °C when magnetic field was applied during postdeposition annealing. Second, the formation of (AlPc)(2)O films with elongated crystallites with a preferential orientation was observed. The heating of (AlPc)(2)O films in a magnetic field at the same conditions did not demonstrate any effect on the structure and morphology of these films.     

Studies on the synthesis of heterocyclic compounds. Part II. Action of phosphorus oxychloride on N-Methyl-N-1-phenyl-3-methylpyrazol-5-yl)-2-acetamidobenzamide

During attempts to prepare the tricyclic ring system of type III by cyclization of N-methyl-N-(1-phenyl-3-methylpyrazol-5-yl)-2-acetamido benzamide (Ib) under Bischler-Napieralski reaction conditions, the formation of the macro-heterocycle IV was observed, whose structure was determined on the basis of analytical and spectroscopic data as well as on some transformation products.     

Infrared spectroscopy of goethite dehydroxylation: III. FT-IR microscopy of in situ study of the thermal transformation of goethite to hematite

Fourier transform infrared microscopy has been used to investigate in situ dehydroxylation of goethite to form hematite. The characterisation was based on the behaviour of hydroxyl units, which were observed in the hydroxyl stretching and hydroxyl deformation and water bending regions, and the Fe-O vibrations of the newly formed hematite during the thermal dehydroxylation process. Two hydroxyl stretching modes (v1 and v2), and three bending (V(bending-1, 2, 3)) and two deformation (V(deformation-1, 2)) modes were observed for goethite. The characteristic vibration at 916 cm(-1) was observed together with the residuals of the v1 and v2 bands in hematite spectrum. The structural transformation between goethite and hematite through thermal dehydroxylation was interpreted in order to provide criteria that can be used for the characterisation of thermally activated bauxite and their conversion to activated alumina phases.     

A Photochemical Study of Diclofenac and Its Major Transformation Products

The photolytic transformation of 2-(2-(2,6-dichlorophenylamino)phenyl)acetic acid (diclofenac) and its transformation products (TPs) (8-chloro-9H-carbazol-1-yl) acetic acid (Cz1), 2-(2-chloro-phenylamino)-benzaldehyde (Ald) and (1,4-dioxo-4,9-dihydro-1H-carbazol-8-yl) acetic acid (Cz4) in aqueous solutions have been studied. The previously unreported TP (Cz4) was isolated by LC and completely characterized by NMR and MS. UV-absorption spectra of diclofenac and three of its TPs were determined and used to calculate disappearance quantum yields. The dominating transformation pathway of diclofenac occurs via initial formation of Cz1 and proceeds to form mainly (Cz4) over 200 min of UV-irradiation. A second minor transformation pathway, which yields Ald as the sole product, was observed only under deaerated conditions.     

Emulsion type new vehicle for soft gelatin capsule available for preclinical and clinical trials: effects of PEG 6000 and PVP K30 on physicochemical stability of new vehicle.

To prevent temperature-dependent gel-sol transformation of an o/w emulsion type new vehicle system for a soft gelatin capsule, which may be available for both preclinical and clinical trials, the basic new vehicle formulation (PEG 400:purified water:medium chain triglyceride:polyoxyethylene (20) cetylether = 77:10:10:3) was modified by partially (1, 2 or 3%) replacing PEG 400 with PEG 6000 or PVP K30. When 2 or 3% of PEG 400 was replaced with PEG 6000, temperature-dependent gel-sol transformation was prevented at temperatures below 40 degrees C, and the vehicle appeared to be stable during 8 weeks of storage at 4 to 40 degrees C; the particle size distribution remained unchanged. When 1% of PEG 400 was replaced with PEG 6000, gel-sol transformation was not prevented, though phase separation was not observed at sol state, and the particle size distribution was shifted to be in a larger particle size range after 2 weeks of storage. When PEG 400 was partially (1, 2 or 3%) replaced with PVP K30, temperature-dependent gel-sol transformation was not prevented and, after 2 weeks of storage at 40 degrees C, the particle size distributions of the vehicles were shifted to be in a larger particle size range and the vehicles were separated into two layers. These results suggested that a small amount of PEG 6000 plays an important role in preventing temperature-dependent gel-sol transformation of our developed vehicle system.     

Characterization of the thermal behavior of poly(hydroxybutylate) by principal component analysis-based two-dimensional correlation spectroscopy.

Principal component analysis-based two-dimensional (PCA2D) correlation spectroscopy, combined with the eigenvalue manipulating transformation (EMT) of a spectral data set, was applied to the temperature-dependent IR spectra of poly(hydroxybutylate) (PHB). In asynchronous PCA2D correlation spectrum, we clearly captured the existence of two components in the crystalline band of the C=O stretching mode, well-ordered primary crystals observed at lower wavenumber and less ordered secondary crystals observed at higher wavenumber, which is not readily detectable in the 1D spectra. By lowering the power of a set of eigenvalues associated with the original data, subtle differences in the thermal responses of PHB, which are difficult to observe even by conventional 2D correlation analysis, are revealed. When the contributions from minor factors are enhanced by eigenvalue manipulating transformation, intensities of bands assignable to the amorphous component of PHB are accentuated more in the C-O-C stretching region, while the intensities of bands assignable to the crystalline component become most prominent in the CH stretching region. However, the 2D correlation between CH and C=O stretching region reveals that the spectral intensity change of the CH(3) stretching bands at 2975 cm(-1) contains a component due to the amorphous contribution.     

Transformation of 1-D Chiral-chained Titanium Phosphate to 2-D Layer Structure Through a 1-D Zigzag Chain

The transformation of titanium phosphate from 1-D chiral- chain(JTP-A) to 2-D layer( TP-J1 ) has been carefully investigated. Through a hydrolysis-condensation self-assembly pathway, the crystals of TP-J1 can be obtained from the JTP-A phase under hydrothermal conditions. An intermediate material with zigzag chain during the transformation was observed by XRD characterization. A hypothesis of the transformation mechanism is also described in this article. It is noteworthy that ethylenediamine plays an important role in the transformation.     

Stereoselective Synthesis of 3-Substituted 4-(Formyloxy)-2-azetidinones by the Unusual Baeyer-Villiger Reaction of beta-Lactam Aldehydes. Scope and Synthetic Applications

The Baeyer-Villiger oxidation of 4-formyl-beta-lactams 1with m-CPBA gave 4-(formyloxy) beta-lactams 2 in a simple, efficient, and totally stereoselective process. This reaction is one of the scarce examples of the preferred migration of a carbon moiety in an aliphatic aldehyde. The influence of the substituents at N1 and C3 of the four-membered ring in the Baeyer-Villiger rearrangement has been studied. Thus, alkyl, alkenyl, aryl, and alkyloxy 3-substituted-1-(p-anisyl)-2-azetidinones 1 form exclusively 4-(formyloxy) beta-lactams 2. Amide or acetoxy substituents at C3 of the four-membered ring produce mixtures of 4-(formyloxy) beta-lactams 2and 4-carboxy beta-lactams 5. The exclusive formation of carboxy derivatives is observed sometimes for 1-alkyl-substituted-2-azetidinones 1. 4-(Formyloxy) beta-lactams 2 are suitable starting materials to prepare different 4-unsubstituted beta-lactams 9 using beta-hydroxy amides 8 as isolable intermediates. The overall transformation 4-formyl-2-azetidinone to 4-unsubstituted beta-lactam is an easy and convenient stereoselective route to these interesting types of compounds.     

Transformation of Cedrane Skeleton to Noracorane and Decahydroazulene Skeletons via Free Radical Reaction. Autooxidation of 8β-Hydroxycedran-13-Al

8-Cedren-14-ol ( 4d ) was oxidized with PCC, followed by autooxidation to yield 8,14-cedranolide ( 2a ) and 8-cedren-14-carboxylic peracid ( 4e ). 8β-Hydroxycedran-l3-al ( 1d ) was subjected to autooxidation in three different solvents to give eight products, from which the transformation from cedrane skeleton to noracorane and decahydroazulene skeletons were observed. A free radical pathway was proposed.     

The behavior of hydroxyl units of synthetic goethite and its dehydroxylated product hematite.

The behavior of the hydroxyl units of synthetic goethite and its dehydroxylated product hematite was characterized using a combination of Fourier transform infrared (FTIR) spectroscopy and X-ray diffraction (XRD) during the thermal transformation over a temperature range of 180-270 degrees C. Hematite was detected at temperatures above 200 degrees C by XRD while goethite was not observed above 230 degrees C. Five intense OH vibrations at 3212-3194, 1687-1674, 1643-1640, 888-884 and 800-798 cm(-1), and a H2O vibration at 3450-3445 cm(-1) were observed for goethite. The intensity of hydroxyl stretching and bending vibrations decreased with the extent of dehydroxylation of goethite. Infrared absorption bands clearly show the phase transformation between goethite and hematite: in particular. the migration of excess hydroxyl units from goethite to hematite. Two bands at 536-533 and 454-452 cm(-1) are the low wavenumber vibrations of Fe-O in the hematite structure. Band component analysis data of FTIR spectra support the fact that the hydroxyl units mainly affect the a plane in goethite and the equivalent c plane in hematite.     

Beiträge zur Chemie der Silicium-Stickstoff-Verbindungen. XCI. Dekamethylcyclotetrasilazan

Decamethylcyclotetrasilazane (I) was prepared starting with 1,3-dichloropentamethyldisilazane (II), 1.3-dichlorotetramethyldisilazane (III) and 1,3-bis-(methylamino)tetramethyldisilazane (IV). respectively, according to scheme 1, equ. (1), (2) and (3) in the text. (I) does not form, as given in the literature (equ. 4)⁵, by thermal transformation of bis(methylaminodimethylsilyl)-tetramethylcyclodisilazane (V); in this case exclusively – in equ. (2) and (3) only in side steps – the reaction products are a mixture of N-methylcyclotrisilazanes (scheme 2, VI–IX).     

Determination of optimum processing temperature for transformation of glyceryl monostearate

The purpose of this study was to clarify the mechanism of transformation from alpha-form to beta-form via beta'-form of glyceryl monostearate (GM) and to determine the optimum conditions of heat-treatment for physically stabilizing GM in a pharmaceutical formulation. Thermal analysis repeated twice using a differential scanning calorimeter (DSC) were performed on mixtures of two crystal forms. In the first run (enthalpy of melting: DeltaH1), two endothermic peaks of alpha-form and beta-form were observed. However, in the second run (enthalpy of melting: DeltaH2), only the endothermic peak of the alpha-form was observed. From a strong correlation observed between the beta-form content in the mixture of alpha-form and beta-form and the enthalpy change, (DeltaH1-DeltaH2)/DeltaH2, beta-form content was expressed as a function of the enthalpy change. Using this relation, the stable beta-form content during the heat-treatment could be determined, and the maximum beta-form content was obtained when the heat-treatment was carried out at 50 degrees C. An inflection point existed in the time course of transformation of alpha-form to beta-form. It was assumed that almost all of alpha-form transformed to beta'-form at this point, and that subsequently only transformation from beta'-form to beta-form occurred. Based on this aspect, the transformation rate equations were derived as consecutive reaction. Experimental data coincided well with the theoretical curve. In conclusion, GM was transformed in the consecutive reaction, and 50 degrees C was the optimum heat-treatment temperature for transforming GM from the alpha-form to the stable beta-form.     

Pyrimidines. XIII. Novel pyrimidine to pyrimidine transformation reactions

Novel pyrimidine to pyrimidine transformation reactions are described. 1,3-Dimethyl-(or diethyl)-uracil(1) are converted into isocytosine, 2-thiouracil or uracil derivatives by treatment with guanidine, thiourea or urea, respectively. The latter two cases require base catalysis. The effects of some substituents at C-5 and C-6 of 1,3-dialkylated uracils (1a → 1e) on this transformation were examined and a plausible mechanism is offered for their reaction. The utility of this reaction is exemplified by the facile two-step conversion of pseudouridine into the anlileukemic agent, pseudoisocytidine, in good overall yield.     

Mechanistic Study of Pd/NHC-Catalyzed Sonogashira Reaction: Discovery of NHC-Ethynyl Coupling Process

The product of a revealed transformation—NHC-ethynyl coupling—was observed as a catalyst transformation pathway in the Sonogashira cross-coupling, catalyzed by Pd/NHC complexes. The 2-ethynylated azolium salt was isolated in individual form and fully characterized, including X-ray analysis. A number of possible intermediates of this transformation with common formulae (NHC)_nPd(C₂Ph) (n=1,2) were observed and subjected to collision-induced dissociation (CID) and infrared multiphoton dissociation (IRMPD) experiments to elucidate their structure. Measured bond dissociation energies (BDEs) and IRMPD spectra were in an excellent agreement with quantum calculations for coupling product π-complexes with Pd⁰. Molecular dynamics simulations confirmed the observed multiple CID fragmentation pathways. An unconventional methodology to study catalyst evolution suggests the reported transformation to be considered in the development of new catalytic systems for alkyne functionalization reactions.     

New cationic olefin cyclization-pinacol reactions. Ring-expanding cyclopentane annulations that directly install useful functionality in the cyclopentane ring

Two new tandem cationic olefin cyclization-pinacol reactions that provide cyclopentane-fused cycloalkanone products are described. Treatment of cis-1-[2-alkenyl-2-(triethylsiloxy)cycloalkyl]but-3-en-2-ol derivatives 21-24 with triflic anhydride at -78 degrees C affords cycloalkanones 31-34 in 54-90% yields with diastereoselectivities of typically >20:1. In this unusual transformation, the starting cycloalkanone is ring-expanded and fused to a 2-alkenylcyclopentane fragment. Reaction of cis-(2-siloxy-2-alkenylcycloalkyl)pyrrolidin-1-ylethanones 15-17 with triflic anhydride and 2,6-di-tert-butyl-4-methylpyridine (DTBMP) at -20 to +65 degrees C followed by hydrolysis of the intermediate iminium salts 64 with aqueous KHCO(3) affords cycloalkanediones 46-48 in moderate yield and high diastereoselectivity (>20:1). These are the first examples of ring-expanding cyclopentane annulations that directly introduce a carbon side chain or carbonyl functionality at the cyclopentane C2 position. The high diastereoselectivities observed in these reactions are believed to arise from reaction through highly organized cyclic transition states.     

Selektive Umfunktionalisierung der terminalen Amidgruppe offenkettiger Polyamide via 2-Oxazolin-5-one als Zwischenstufen. Vorläufige Mitteilung

Selective Modification of the Terminal Amide Group of Linear Polyamides via 2-Oxazolin-5-ones as Intermediates Treatment of aqueous or alcoholic solutions of diamides of type 2 with HCl leads to the formation of amide-acids and amide-esters of type 3 (Scheme 1 and Table). It has been shown, that 2-oxazolin-5-ones of type 4 are intermediates of this selective transformation of the disubstituted terminal amide group. The selectivity of the transformation is demonstrated by the reaction sequence shown in Scheme 3. No selectivity has been observed in the acid-catalyzed hydrolysis of triamide 9 with a monosubstituted terminal amide group (Scheme 4). Hydrolysis of the optically active dipeptide derivatives (+)-(L )- 13 and (+)-(L )- 15 with HBr in nitromethane at 60–80° yields the pure enantiomer (+)-(L )- 14 and (+)-(L )- 16 , respectively (Scheme 5), i.e., no racemization takes place under the reaction conditions. These results show the usefulness of the dimethylamide group as a protecting group for carboxylic acids for example in the peptide synthesis.     

Pyrimidine derivatives and related compounds. 38. Synthesis of 1,3-oxazine-2,4-diones and their reaction with nucleophiles. Ring transformation of 1,3-oxazines to pyrimidines

5,6-Unsubstituted 1,3-oxazine-2,4-diones ( 3 ) and 6-unsubstituted 5-methyl-1,3-oxazine-2,4-diones ( 4 ) were prepared by reduction of the corresponding 6-chloro derivatives ( 1 and 2 ). Treatment of 6-chloro-3-methyl-1,3-oxazine-2,4-dione ( 1a ) with sodium azide, sodium cyanide, secondary amines and aniline gave the corresponding 6-substituted compounds ( 7, 9, 10 and 11 ) while the reaction of 1a and 2a,b with primary aliphatic amines such as methylamine and ethylamine caused a ring transformation to pyrimidine ring system giving barbituric acids ( 13a-d ).     

Bmim]PF(6): a novel and recyclable ionic liquid for conversion of oxiranes to thiiranes in aqueous media

A variety of epoxides respond rapidly with potassium thiocyanate in [bmim]PF(6)-H(2)O (2:1) solvent system at room temperature under mild and convenient conditions to produce the corresponding thiiranes in high to quantitative yields. Enhanced rates, improved yields, and recyclability of ionic liquids are the remarkable features observed in ionic liquids (ILs). The use of ionic liquids for this transformation avoids the use of heavy metal halides as promoters and chlorinated hydrocarbons as solvents. The ionic liquid was recycled in five to six subsequent runs with gradual decrease in activity.     

Syntheses of supramolecular CuCN complexes by decomposing CuSCN: a general route to CuCN coordination polymers?

The solvothermal reaction of CuSCN with 1,2-bis(diphenylphosphino)ethane (dppe) yielded a coordination polymer, which was characterized to be a complex of CuCN and 1,2-bis(diphenylthiophosphinyl)ethane (dppeS2): [(CuCN)2(dppeS2)]n (1). The identification of complex 1 reveals that CuSCN was decomposed and the sulfur was transferred to dppe, and represents a new example of the transformation of inorganic sulfur to organic sulfur. The weak coordination interactions between CuCN and dppeS2 indicate that dppeS2 may be substituted by ligands with strong coordination ability. The ligand 2,4,6-tris(2-pyridyl)-1,3,5-triazine (tpt) was chosen as a substitute ligand. Three novel CuCN coordination polymers of tpt were synthesized and characterized: [Cu2(CN)2(tpt)]n (2) with a 3-D (10,3)-a network, [Cu2(CN)2(tpt)]n (3) and [Cu2(SCN)(CN)(tpt)]n (4) both with a 2-D (6,3) network, and only complex 2 can be obtained from CuCN directly. Interestingly, compounds 2 and 3 are genuine high-dimensional supramolecular isomers. During the syntheses of 2-4, single crystals of dppeS2 were isolated, which indicates it was substituted by tpt ligand and also confirmed the transformation of sulfur from CuSCN to dppe. The transformation of sulfur can be observed only when the temperature is relative high (>160 degrees C). At 140 degrees C, complex 5 containing only CuSCN was attained and no dppeS2 has been monitored in the resulting filtrate.     

Reactions of triacetylmethane with monosubstituted hydrazines and amidine analogues. Syntheses of 4-acetyl-3,5-dimethylpyrazole amidinohydrazone and 1,3,5-triazine derivatives

Triacetylmethane ( 1 ) reacts with amidinohydrazines in acidic medium to afford 4-acetyl-3,5-dimethylpyrazole amidinohydrazone derivatives 2,4 . However, a similar reaction of 1 with thiosemicarbazide or semicarbazide led mainly to 3,5-dimethylpyrazole ( 6 ). The great propensity of 1 to hydrolysis accounts for this last transformation, as well as for the fact that with guanidine it led to 2-amino-4,6-dimethylpyrimidine ( 10 ) and with S-methylisothiourea it provided the unexpected 2-amino-4-methyl-6-methylthio-1,3,5-triazine ( 11 ).