The effects of aromatic solvents on the photopolymerization rates of isoprene,ethyl methacrylate,and styrene

The photochemical polymerization rates of isoprene, ethyl methacrylate, and of styrene in various aromatic solvents were measured. The average lifetimes of propagating radicals were measured by the rotating sector method. The polymerization rate constants, K_p, were determined and compared with dipole moments (μ) and Hammett σ constants for the aromatic solvents. Linear correlations of log(k_p/k_{p, benzene}) vs. μ and σ were obtained.     

ESR study on radical polymerization and its application to microemulsion systems

Well-resolved electron spin resonance (ESR) spectra of propagating radicals of vinyl and diene compounds were observed in a single scan by a conventional CW-ESR spectrometry without the aid of computer accumulation and the specially designed cavity and cells. Although solvents which could be used for ESR measurements were restricted to nonpolar solvents, such as benzene, toluene, and hexane, new information on dynamic behavior and reactivity of the propagating radicals in the radical polymerization of vinyl and diene compounds were obtained. Thus, values of propagation rate constants (k_p) for vinyl and diene compounds were determined by an ESR method. Some of the k_p values were in a fair agreement with those obtained by a pulsed laser polymerization (PLP) method. Furthermore, polymer chain effect on apparent k_p was clearly observed in the radical polymerization of macromonomers and in the microemulsion polymerization. In ESR measurement on inclusion polymerization system, important information on the origin of the 9-line spectrum observed in the radical polymerization of methacrylate propagating radicals was obtained.     

Solvent effect on radical polymerization of butyl acrylate

The propagation and termination rate constants k_p and k_t for the radical polymerization of butyl acrylate initiated by biacetyl have been measured by using the rotating-sector method, in various solvents at 30°C. The value of k_p and initiation rate R_i varied with solvents, while the value of k_t did not change with solvents except for benzonitrile. The variation of k_p with aromatic solvents has a trend against Hammett σ_p of the solvent substituents similar to that for methyl methacrylate or phenyl methacrylate except for the value in benzonitrile, when it is larger than the variation for methyl methacrylate or phenyl methacrylate. The larger variation of k_p for butyl acrylate is compatible with the view that the origin of the solvent effect lies in complex formation between the propagating radical and aromatic solvent molecules. The exceptional decrease in k_p and k_t in benzonitrile is explained by a contraction of the poly(butyl acrylate) chain in the poor solvent.     

Chain transfer constants for vinyl monomers polymerized in methyl oleate and methyl stearate

Chain transfer constants were obtained for styrene, methyl methacrylate, methyl acrylate and vinyl acetate, polymerized in methyl oleate and methyl stearate at 60°C. Transfer constants increased in the order: methyl methacrylate < styrene < methyl acrylate ? vinyl acetate in both solvents. Average values of the transfer parameters were: for methyl oleate, Q_tr = 2.04 × 10^?4, e_tr = 1.08; for methyl stearate, Q_tr = 0.373 × 10^?4, e_tr = 1.01. Indication that polar species predominate in the transition state is supported by the observed order of reactivity. The usual rate dependence appeared to be followed by all of the monomers except vinyl acetate, which was retarded, severely in methyl oleate. Transfer in methyl oleate was about 5.8 times greater than that found in methyl stearate for these four monomers. The internal allylic double bond of methyl oleate had about the same reactivity in transfer as had the terminal unsaturation in N-allylstearamide at 90°C. Rough estimates were obtained of the monomer transfer constants for the long side-chain homologs of these four monomers from the respective monomer transfer constants and the experimental transfer constants, corrected for transfer to the labile groups of the solvent. It was concluded that the rate of polymerization would determine in large measure the degree of polymerization for the reactive 18-carbon homologs but that the molecular weight of poly(vinyl stearate) and (oleate) will be regulated primarily by transfer to monomer.     

Photoinitiation. IV. The effect of lewis acid on the vinyl monomer polymerization photoinitiated by aromatic hydrocarbons

Polymerization of acrylonitrile photoinitiated by naphthalene, anthracene, phenanthrene, and pyrene is accelerated by an admixture of zinc (II) chloride, acetate, or nitrate. The effect of zinc (II) salts on the rate of pyrene-photoinitiated polymerization of acrylonitrile leads to an increase in this rate in the order Zn/OCOCH_3/2 < ZnCl₂ < Zn/NO_3/2. The maximum polymerization rate is achieved at the molar ratio [ZnCl₂]/([ZnCl₂] + [pyrene]) approximately 0.7. In contrast to the photoinitiated polymerization of acrylonitrile, the methyl methacrylate admixture of zinc (II) chloride exerts a smaller effect on the polymerization rate. In the pyrene-photoinitiated polymerization of styrene an admixture of zinc (II) chloride retards the polymerization rate. Fluorescence of aromatic hydrocarbon in the system acrylonitrile–aromatic hydrocarbon is efficiently quenched by zinc (II) chloride. Stern–Volmer constants determined for pyrene (80 dm³ mole^?1), phenanthrene (66 dm³ mole^?1), and naphthalene (49 dm³ mole^?1) are higher by about 2–3 orders of the Stern–Volmer constants for fluorescence quenching of aromatic hydrocarbons by acrylonitrile in the absence of ZnCl₂. The fluorescence of anthracene in acrylonitrile is not quenched by ZnCl₂. The acceleration effect of Zn (II) salts on the polymerization of acrylonitrile photoinitiated by aromatic hydrocarbons depends on two factors: an increase in the ratio of the rate constant of the growth and termination reactions, k_p/k_t, and an increase in the quenching constant of fluorescence of aromatic hydrocarbon, k_q, by the complex {acrylonitrile…ZnCl₂}. ZnCl₂ thus influences both the growth and initiation reactions of the polymerization process.     

Photoinitiation. II. Kinetics of the acrylonitrile polymerization photoinitiated by aromatic hydrocarbons

The kinetics of acrylonitrile polymerization photoinitiated by aromatic hydrocarbons have been studied. For the acrylonitrile polymerization photoinitiated by naphthalene the rate of polymerization depends on the square root of incident light intensity, on the square root of naphthalene concentration, and on the 1.5 power of acrylonitrile concentration. In the system acrylonitrile-1-methoxynaphthalene the rate of acrylonitrile polymerization depends on the first power of acrylonitrile concentration. The monoradical character of this polymerization process has been established. For the interpretation of experimental results a reaction mechanism involving the formation of the exciplex between the first singlet or triplet of aromatic hydrocarbon and acrylonitrile in the ground state as a precursor of polymerization reactions is suggested. The photoinitiating efficiency of various aromatic hydrocarbons in acrylonitrile polymerization increases in the order: fluoranthene (zero efficiency) ? pyrene < phenanthrene, fluorene ≈ 2-methoxynaphthalene ≈ biphenyl < anthracene < 2-methylnaphthalene < 1-methoxynaphthalene < 2,3,6-trimethylnaphthalene < 2,3-dimethylnaphthalene ≈ naphthalene < 1-methylnaphthalene < 2,6-dimethylnaphthalene < p-terphenyl < acenaphthene, provided that the systems absorb the same amount of the incident light. The explanation of this result ensues from the study of the effect of concentration on the rate of polymerization and from the quenching of hydrocarbon fluorescence by acrylonitrile. The photoinitiating efficiency of a given aromatic hydrocarbon is mainly determined by the value of the rate constant k_q for the formation of exciplex as well as the self-quenching efficiency of aromatic hydrocarbon. By using the literature data for the lifetime of fluorescence τ the values of k_q were calculated from the Stern-Volmer equation expressing the quenching of hydrocarbon fluorescence by acrylonitrile. The order of aromatic hydrocarbons according to increasing values of k_q is as follows: pyrene < phenanthrene < anthracene ≈ naphthalene < 2-methylnaphthalene ≈ 1-methylnaphthalene ≈ 2,3-dimethylnaphthalene < 2,6-dimethylnaphthalene < acenaphthene < p-terphenyl < 1-methoxynaphthalene. The study of the concentration effect reflecting the self-quenching of aromatic hydrocarbons during polymerization has given the following sequence for decreasing self-quenching efficiency of aromatic hydrocarbons: 2-methoxynaphthalene ≈ pyrene > anthracene > 1-methoxynaphthalene > fluorene > 2,6-dimethylnaphthalene, phenanthrene, acenaphthene > 2,3,6-trimethylnaphthalene > 2,3-dimethylnaphthalene > 1-methylnaphthalene > naphthalene. It has been shown that the photoinitiating efficiency of a given aromatic hydrocarbon in the polymerization of acrylonitrile can be roughly predicted from the position of that aromatic hydrocarbon in the above-mentioned sequences.     

Reaction of chlorine dioxide with phenol

The kinetics of phenol oxidation with chlorine dioxide in different solvents (2-methylpropan-1-ol, ethanol, 1,4-dioxane, acetone, acetonitrile, ethyl acetate, dichloromethane, heptane, tetrachloromethane, water) was studied by spectrophotometry. In all solvents indicated, the reaction rate is described by an equation of the second order w = k[PhOH]·[ClO₂]. The rate constants were measured (at 10—60 °C), and the activation parameters of oxidation were determined. The reaction rate constant depends on the solvent nature. The oxidation products are a mixture of p-benzoquinone, 2-chloro-p-benzoquinone, and diphenoquinone.     

Effect of solvent on the rate constants in solution polymerization. Part II. Vinyl acetate

Measurements were made of the value of the lumped kinetic constant k_p/k of vinyl acetate in different solvents and with different initiators. This quantity was evaluated using the well‐known conversion vs. time approach in dilute solutions using both azo‐bis‐isobutyronitrile and benzoyl peroxide (AIBN and BPO), and two different solvents (toluene and ethyl acetate) at 60°C. As was found for butyl acrylate in Part 1 of this series, it was found that the value of the lumped rate constant depends very strongly on the concentration of monomer in solution, decreasing as the solution becomes more and more dilute. However, unlike butyl acrylate, vinyl acetate is much more susceptible to changes in the solvent type, with toluene acting as a severe retarding agent of polymerization. The results of the present study suggest that at least two separate effects of solvent exist simultaneously in the case of vinyl acetate polymerization, and that both of them must be taken into account when attempting to model this type of system. The number‐ and weight‐average molecular weights of the different polymers were also measured, and excellent agreement was found between the measurements and model predictions. A linear relationship was shown to exist between the value of the lumped constant and the square root of the number‐average chain length. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 589–601, 1999     

Emulsion polymerization and copolymerization of vinyl benzoate

Emulsion polymerization of vinyl benzoate and its copolymerization with vinyl acetate or styrene are described. The effect of the potassium persulfate initiator, and the sodium lauryl sulfate emulsifier concentration on the rate of vinyl benzote homopolymerization and the molecular weight of the polymers was determined. In copolymerization with vinyl benzoate, both comonomers, vinyl acetate and styrene, decrease the initial polymerization rate. With increasing amounts of styrene in the comonomer mixture the polymerization rate increases but with vinyl acetate an opposite effect is observed. Reactivity ratios of copolymerizations were determined. For the vinyl benzoate [M₁]-styrene [M₂] comonomer system a r₁ = 0.03 and a r₂ = 29.58 and for vinyl benzoate [M₁]-vinyl acetate [M₂], a r₁ = 1.93 and a r₂ = 0.20 was obtained. From the vinyl benzoate-styrene reactivity ratios the Qe parameters were calculated.     

Novel cyano-containing copolymers of vinyl esters for piezoelectric materials

The synthesis of a series of novel cyano-containing copolymers is described. Alternating copolymers of acrylonitrile with vinyl esters are obtained by increasing the electrophilic character of the nitrile monomers by complexation with zinc chloride. Copolymers of methyl and ethyl α-cyanoacrylates with vinyl esters are prepared using radical initiators in the presence of 7% acetic acid as inhibitor for anionic polymerization. The copolymers of methyl α-cyanoacrylate with the vinyl esters have T_g's above 140°C. Methyl vinylidene cyanide (MVCN) copolymerizes spontaneously with para-substituted styrenes to yield copolymers with high inherent viscosities and high T_g (160°C) and the copolymer of MVCN with vinyl acetate is also synthesized. The pyroelectric constants p for these polymers were measured and the values of p for the copolymers of vinyl acetate with methyl β,β-dicyanoacrylate, methyl α-cyanoacrylate, or MVCN were in the same range as the well-studied vinylidene cyanide/vinyl acetate copolymer. A higher concentration of dipoles generally results in higher T_g's and higher pyroelectric coefficients. © 1992 John Wiley & Sons, Inc.     

Determination of absolute rate constants for free radical polymerization of ethyl α-fluoroacrylate and characterization of the polymer

The absolute rate constants for propagation (k_p) and for termination (k_t) of ethyl α-fluoroacrylate (EFA) were determined by means of the rotating sector method; k_p = 1120 and k_t = 4.8 × 10⁸ L/mol.s at 30°C. The monomer reactivity ratios for the copolymerizations with various monomers were obtained. By combining the k_p values for EFA from the present study and those for common monomers with the monomer reactivity ratios, the absolute values of the rate constants for cross-propagations were also evaluated. Reactivities of EFA and poly(EFA) radical, being compared with those of methyl acrylate and its polymer radical, were found to be little affected by the α-fluoro substitution. Poly(EFA) prepared with the radical initiator was characterized by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). Although the glass transition temperature obtained by DSC for poly(EFA) resembled that of poly(ethyl α-chloroacrylate), its TGA thermogram showed fast chain de polymerization to EFA that was distinct from complicated degradation of poly(ethyl α-chloroacrylate).     

Free-radical polymerization of vinyl ferrocene

The results of quantitative studies of the rates of free-radical polymerization of vinyl ferrocene indicate that the latter has polymerization characteristics similar to those of styrene. The rates of homopolymerization of these two monomers in benzene at 70°C. were measured with the use of azobisisobutyronitrile as catalyst. The rate constants (k = R_p/[M][I]^1/2) are k_VF = (1.1 ? 1.8) × 10^?4, k_STY = 1.65 × 10^?4. Small amounts of vinyl ferrocene and styrene have similar effects on the rates of polymerizations of methyl methacrylate and ethyl acrylate and on the molecular weights of the resulting polymer. Polystyrene and poly(vinyl ferrocene) with similar molecular weights are isolated from polymerizations carried out under identical conditions. The rates of copolymerization of vinyl ferrocene—methyl methacrylate, vinyl ferrocene—styrene, and styrene—methyl methacrylate were determined by following the disappearance of monomers by means of gas chromatographic analyses. The relative reactivity for vinyl ferrocene is slightly lower than that for styrene.     

Free‐radical copolymerization of vinyl esters using fluoroalcohols as solvents: The solvent effect on the monomer reactivity ratio

Free‐radical copolymerizations of vinyl acetate (VAc = M₁) and other vinyl esters (= M₂) including vinyl pivalate (VPi), vinyl 2,2‐bis(trifluoromethyl)propionate (VF6Pi), and vinyl benzoate (VBz) with fluoroalcohols and tetrahydrofuran (THF) as the solvents were investigated. The fluoroalcohols affected not only the stereochemistry but also the polymerization rate. The polymerization rate was higher in the fluoroalcohols than in THF. The accelerating effect of the fluoroalcohols on the polymerization was probably due to the interaction of the solvents with the ester side groups of the monomers and growing radical species. The difference in the monomer reactivity ratios (r₁, r₂) in THF and 2,2,2‐trifluoroethanol was relatively small for all reaction conditions and for the monomers tested in this work, whereas r₁ increased in the VAc‐VF6Pi copolymerization and r₂ decreased in the VAc‐VPi copolymerization when perfluoro‐tert‐butyl alcohol was used as the solvent. These results were ascribed to steric and monomer‐activating effects due to the hydrogen bonding between the monomers and solvents. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 220–228, 2000     

Solvent effect on the radical polymerization of di-n-butyl itaconate

Solvent effect on the polymerization of di-n-butyl itaconate (DBI) with dimethyl azobisisobutyrate (MAIB) was investigated at 50 and 61°C. The solvents used were found to affect significantly the polymerization. The polymerization rate (R_p) and the molecular weight of the resulting polymer are lower in more polar solvents. The initiation rate (R_i) by MAIB, however, shows a trend of being rather higher in polar solvents. The stationary state concentration of propagating poly(DBI) radical was determined by ESR in seven solvents. The rate constants of propagation (k_p) and termination (k_t) were evaluated by using R_p, R_i, and the polymer radical concentration observed. The k_p value decreases fairly with increasing polarity of the solvent used, whereas k_t is not so influenced by the solvents. The solvent effect on k_p is explained in terms of a difference in the environment around the terminal radical center of the growing chain. Copolymerization of DBI with styrene (St) was also examined in three solvents with different physical properties. The poly(DBI) radical shows a lower reactivity toward St in a more polar solvent.     

CuI and CuII salts of group VIA elements as catalysts for living radical polymerization initiated with sulfonyl chlorides

The living radical polymerization of methyl methacrylate initiated from sulfonyl chlorides and catalyzed by the new catalytic systems Cu₂Y/Bpy and CuY/Bpy, where Y is O, S, Se, or Te and Bpy is 2,2′‐bipyridine, is described. An induction time was observed in all polymerization experiments. The values of the experimental rate constants of polymerization (k_p ^exp) increased whereas the corresponding induction times decreased in the order Y = O < S < Se < Te. For the entire series of catalysts, k_p ^exp for CuY was less than k_p ^exp for Cu₂Y. A mechanistic interpretation that involves the in situ generation of the CuCl/CuCl₂ pair, starting from Cu₂Y or CuY, is provided. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3839–3843, 2000     

Kinetics of the reaction of sodium arylthiolates with nitro-carboxybenzyl halide derivatives

The rate constants for the reactions of 4-halomethyl-3-nitrobenzoic acids, the nonnitro derivatives, and their ethyl esters with arylthiolates were measured at different temperatures. It was found that the retardation in rate constants compared to benzyl halides is due to the electrostatic repulsion between the electronegative substituents (COO⁻ and/or NO₂) in the substrates and thiolate ions. Good correlations between log k₂ values of the acids and carbon basicities of thiolates were found while log k₂ values of the esters show good straight lines with Hammett σ constants, pk_a, and carbon basicities of arylthiolates. © 1996 John Wiley & Sons Inc     

Photopolymerization of styrene,p-chlorostyrene,methyl methacrylate,and butyl methacrylate with polymethylphenylsilane as photoinitiator

The rates of photochemical polymerization of styrene (St), p-chlorostyrene (Cl-St), methyl methacrylate (MMA), and butyl methacrylate (BMA) with polymethylphenylsilane (PMPS) as an initiator were measured. Polymethylphenylsilane is photodegrated to form silyl radicals that may initiate polymerization of vinyl monomers. Rate constants k_p and k_t have been determined for these systems. A good correlation (log P = α + βμ) of the resonance stabilization (P) of the chain radicals and the dipole moment (μ) of the monomers is observed for these polymerization systems. This equation may be used to estimate the resonance stabilization (P) of a monomer and the polymerization rate constant (k_p). © 1996 John Wiley & Sons, Inc.     

Comments on the determination of absolute rate constants in anionic polymerization

Claims have recently been made that absolute rate constants for chain propagation of the unassociated active centers can be made in systems where a high degree of association is present. Anionic polymerization of styrene in nonpolar solvents with lithium as counterion is a typical case. The conditions required to obtain these constants (and the associated aggregate dissociation constants) are described using data from styrene polymerization with lithium and potassium as counterions and data from o-methoxystyrene polymerization. The conclusion reached must be that the k_p and K_ds values obtained for styrene with counterion lithium cannot be obtained from existing literature data and are simply artifacts of the computer analysis. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1065–1068, 1998     

Solubility of Nitro and Bromo Derivatives of Octaphenyltetraazaporphine

The equilibrium solubility in benzene, tetrachloromethane, and ethyl acetate of octaphenyltetraazaporphine containing electron-acceptor (NO₂) and electron-donor (Br) substituents in the phenyl rings was determined. In these solvents, p-substitution in aromatic rings with bromine considerably (by an order of magnitude and more) increases the solubility of porphyrins, whereas p-substitution with the NO₂ group does not noticeably affect the solubility of the macrocycle in nonpolar solvents but increases the solubility in ethyl acetate by a factor of more than 200.     

Polymerization Kinetics of Water-Soluble N-Vinyl Monomers in Aqueous and Organic Solution

Summary: Free-radical batch polymerization (FRP) of N-vinyl pyrrolidone (NVP) and N-vinyl formamide (NVF) monomers in aqueous solution as well as NVP polymerization in organic (n-butanol) solution has been studied. The differences found in rate of monomer conversion with monomer and solvent choice correlates well with the differences in values of the propagation rate coefficients (k_p) and their variation with monomer concentration measured in independent pulsed-laser polymerization studies, a result demonstrating that a generalized understanding of water-soluble vinyl monomers can be obtained once their k_p differences have been accounted for. A reasonable representation of polymer molecular mass averages and the complete molecular mass distributions for the three systems was obtained by assuming that the rate coefficient for transfer to monomer, polymer, and organic solvent also vary as a function of monomer concentration.