Interpenetrating polymer networks of poly(dimethyl siloxane–urethane) and poly(methyl methacrylate)

Simultaneous IPNs of poly(dimethyl siloxane-urethane) (PDMSU)/poly(methyl methacrylate) (PMMA) and related isomers have been prepared by using new oligomers of bis(β-hydroxyethoxymethyl)poly(dimethyl siloxane)s (PDMS diols) and new crosslinkers biuret triisocyanate (BTI) and tris(β-hydroxylethoxymethyl dimethylsiloxy) phenylsilane (Si-triol). Their phase morphology have been characterized by DSC and SEM. The SEM phase domain size is decreased by increasing crosslink density of the PDMSU network. A single phase IPN of PDMSU/PMMA can be made at an M_c = 1000 and 80 wt % of PDMSU. All of the pseudo- or semi-IPNs and blends of PDMSU and PMMA were phase separated with phase domain sizes ranging from 0.2 to several micrometers. The full IPNs of PDMSU/PMMA have better thermal resistance compared to the blends of linear PDMSU and linear PMMA. © 1993 John Wiley & Sons, Inc.     

Characterization and degradation of poly(methylphenylsiloxane)–poly(methyl methacrylate) interpenetrating polymer networks

Poly(methylphenylsiloxane)–poly(methyl methacrylate) interpenetrating polymer networks (PMPS–PMMA IPNs) were prepared by in situ sequential condensation of poly(methylphenylsiloxane) with tetramethyl orthosilicate and polymerization of methyl methacrylate. PMPS–PMMA IPNs were characterized by infrared (IR), differential scanning calorimetry (DSC), and ²⁹Si and ¹³C nuclear magnetic resonance (NMR). The mobility of PMPS segments in IPNs, investigated by proton spin–spin relaxation T₂ measurements, is seriously restricted. The PMPS networks have influence on the average activation energy E_a,av of MMA segments in thermal degradation at initial conversion. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1717–1724, 1999     

Characterization and degradation of the poly(methylphenylsiloxane)–poly(methyl methacrylate) graft copolymer

Poly(methylphenylsiloxane)–poly(methyl methacrylate) graft copolymers (PSXE-g-PMMA) were prepared by condensation reaction of poly(methylphenylsiloxane)-containing epoxy resin (PSXE) with carboxyl-terminated poly(methyl methacrylate) (PMMA), and they were characterized by gel permeation chromatography (GPC), infrared (IR), and ²⁹Si and ¹³C nuclear magnetic resonance (NMR). The microstructure of the PSXE-g-PMMA graft copolymer was investigated by proton spin–spin relaxation T₂ measurements. The thermal stability and apparent activation energy for thermal degradation of these copolymers were studied by thermogravimetry and compared with unmodified PMMA. The incorporation of poly(methylphenylsiloxane) segments in graft copolymers improved thermal stability of PMMA and enhanced the activation energy for thermal degradation of PMMA. © 1998 John Wiley & Sons, Inc. J. Polym. Sci. A Polym. Chem. 36: 2521–2530, 1998     

Surface and solution properties of polysiloxane–poly(methyl methacrylate) graft copolymer

A polysiloxane–poly(methyl methacrylate) (PMMA) graft copolymer was prepared by hydrosilylation reaction between a Si? H containing polysiloxane and an allyl-terminated PMMA. The obtained graft copolymer was blended with PMMA homopolymer. The addition of only 0.01 wt % of graft copolymer was sufficient to make PMMA surfaces hydrophobic. In acetone–cyclohexane mixed solvent, the graft copolymer formed a polymeric micelle by the aggregation of PMMA branches.     

Synthesis of ferrocene‐modified poly(glycidyl methacrylate) and its burning rate catalytic property

A series of ferrocene‐modified poly(glycidyl methacrylate) (PGMA‐Fc) compounds were synthesized and applied as burning rate catalysts in simulative solid propellant to overcome migration problems. ¹H NMR and Fourier transform infrared spectroscopies and gel permeation chromatography were used to characterize the synthesized polymers. Their electrochemical behavior was evaluated using cyclic voltammetry. Their catalytic performance for the decomposition of ammonium perchlorate (AP) was investigated using thermogravimetric analysis. Anti‐migration studies were conducted in migration tubes under 50°C. The results show that PGMA‐Fc has a good catalytic effect on lowering the thermal decomposition temperature of AP. Anti‐migration studies show that PGMA‐Fc has better anti‐migration performance than ferrocene and catocene.     

Polymer–monomer binary mixtures. I. Eutectic and epitaxial crystallization in poly(ϵ-caprolactone)–trioxane mixtures

Binary mixtures of a linear polyester (poly(?-caprolactone)) and a crystallizable monomer (trioxane) have been investigated by means of differential scanning calorimetry and optical and electron microscopy. The phase diagram indicates the existence of a eutectic at a temperature T_mE = 314°K and for a polymer volume fraction ?_2E = 0.70, values close to those predicated by the Flory–Huggins theory (using χ = 0.3). Microscopic studies reveal unusual morphologies: (1) In hypoeutectic mixtures, at room temperature, the solvent crystallizes as highly ramified or branched needles. When the remaining melt reaches the eutectic composition, transcrystallization of the polymer is induced by the epitaxial deposition (as established by electron diffraction) of polycaprolactone on the existing trioxane crystals, and leads to highly ordered structures. (2) In hypereutectic mixtures a predominantly spherulitic texture is observed. Blends of trioxane and several other linear polyesters are found to exhibit similar behavior.     

Energy transfer and radical formation in the system poly(methyl methacrylate)–2-methyltetrahydrofuran

ESR spectra of γ-irradiated poly(methyl methacrylate) (PMMA) at 77°K and the effect of additives have been studied. γ-Irradiation of PMMA containing a small amount of 2-methyltetrahydrofuran as an additive at 77°K gives MTHF radical. Yields of MTHF radical increase with increasing MTHF concentration and reach a plateau value, and are independent of photobleaching with visible light. Yeilds of polymer radical are reduced by the addition of MTHF. Some elementary processes for the MTHF radical formation are proposed on the basis of the experimental results.     

Crystalline structure and morphology of microphases in compatible mixtures of poly(tetrahydrofuran‐methyl methacrylate) diblock copolymer and polytetrahydrofuran

The crystalline structure and morphology of compatible mixtures of poly(tetrahydrofuran‐methyl methacrylate) diblock copolymers (PTHF‐b‐PMMA) with a polytetrahydrofuran homopolymer (PTHF) were studied with synchrotron X‐rays. Wide‐angle diffraction was used to study the crystalline structures in a confined lamellar region with a PTHF thickness ranging from 12.2 to 19.5 nm, and in a PTHF matrix with an interface distance between the PMMA cylinders ranging from 17 to 22 nm. As the above thickness values are around the long period (ca. 17 nm) of PTHF homopolymer under the crystallization condition used, the crystalline structure has been found to be very sensitive to the average thickness of the PTHF phase. The changes in the diffraction patterns with changing PTHF homopolymer content suggested a chain folding model in confined PTHF lamellae with the PTHF fiber axes being perpendicular to the thick PTHF lamella. In the case of hexagonally packed cylindrical PMMA microdomains with an interface distance ranging from 12 to 16 nm, the effects of PMMA cylinders on the crystallization morphology of PTHF in the PTHF matrix, and the effects of the PTHF crystallization on the hexagonally packed structure of PMMA cylinders were also studied. It is shown that only when the interdistance of two neighboring PMMA cylinders is comparable with the long period of the pure PTHF homopolymer, ordered PTHF stacks can be formed in the PTHF matrix. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 779–792, 1999     

Organic–inorganic hybrid materials. V. Dynamics and degradation of poly(methyl methacrylate) silica hybrids

Poly(methyl methacrylate)–silica hybrid materials (PMMA–SiO₂) were prepared by in situ polycondensation of alkoxysilane in the presence of trialkoxysilane‐functional PMMA. Infrared, differential scanning calorimetry, ²⁹Si and ¹³C nuclear magnetic resonance spectroscopy, and thermogravimetric analysis were used to study the PMMA–SiO₂ hybrids. The effects of the content and kind of the alkoxysilane on the dynamics and stability of the PMMA–SiO₂ hybrids were investigated in this study.The dynamics of SiO₂within hybrids were investigated with ²⁹Si–¹H cross‐polarization. The spin‐diffusion path length was on a nanometer scale estimated with the spin–lattice relaxation time in the rotating frame (T). The apparent activation energies for the degradation of the hybrids under air and nitrogen were evaluated by the van Krevelen method. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1972–1980, 2000     

Quantitation of functionality of poly(methyl methacrylate) by liquid chromatography under critical conditions followed by evaporative light-scattering detection. Comparison with NMR and titration

Atom transfer radical polymerisation (ATRP) is a versatile 'living' controlled polymerisation technique for the synthesis of well-defined architectures such as block copolymers, gradient copolymers, hyperbranched polymers and telechelic polymers. ATRP provides control over molecular mass and molecular mass distribution and is suitable for the polymerisation of a wide variety of monomers, including methyl methacrylate. A chromatographic method was developed for an endgroup-based separation of low-molecular-mass poly(methyl methacrylate) (PMMA), based on liquid chromatography under critical conditions. With this method the PMMA, irrespective of its low-molecular-mass, is separated according to endgroups (functionality) due to interactions of the polar endgroups with the non-modified silica based stationary phase. The different series were identified using on-line atmospheric pressure ionisation electrospray mass spectrometry and quantified by evaporative light scattering detection. These results were compared with those obtained by NMR and titration.     

Experimental and theoretical investigation of anomalous sorption kinetics in the methanol vapor–poly(methyl methacrylate) system at 35 °C

Non‐Fickian sorption kinetics of methanol vapor in a poly(methyl methacrylate) film of 8 μm, at 35 °C, are presented. The behavior of the system was studied in series of interval absorption runs. The relevant diffusion and viscous relaxation processes were studied by kinetic analysis of the sorption kinetic curves, using the relaxation‐dependent solubility model. The sorption isotherm concaves upward at high activities, typical to Florry–Huggins behavior, while it exhibits a convex‐upward curvature at low methanol vapor activities, indicating sorption in the excess free volume of the polymer matrix. Thermodynamic diffusivity presents a complex functional dependence on the concentration, while relaxation rate is found to be a function of concentration as well as of concentration interval. Relaxation rate becomes increasingly concentration‐dependent as the effective glass transition of the system is approached. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3173–3184, 2006     

Poly(vinyl alcohol)/poly(methyl methacrylate) blend membranes for pervaporation separation of water + isopropanol and water + 1,4-dioxane mixtures

Pervaporation (PV) separation of water + isopropanol and water + 1,4-dioxane mixtures has been attempted using the blend membranes of poly(vinyl alcohol) (PVA) with 5 wt.% of poly(methyl methacrylate) (PMMA). These results have been compared with the plain PVA membrane. Both plain PVA and PVA/PMMA blend membranes have been crosslinked with glutaraldehyde in an acidic medium. The membranes were characterized by differential scanning calorimetry and universal testing machine. Pervaporation separation experiments have been performed at 30 °C for 10, 15, 20, 30 and 40 wt.% of feed water mixtures containing isopropanol as well as 1,4-dioxane. PVA/PMMA blend membrane has shown a selectivity of 400 for 10 wt.% of water in water + isopropanol feed, while for water + 1,4-dioxane feed mixture, membrane selectivity to water was 104 at 30 °C. For both the feed mixtures, selectivity for the blend membrane was higher than that observed for plain PVA membrane, but flux of the blend membrane was lower than that observed for the plain PVA membrane. Membranes of this study are able to remove as much as 98 wt.% of water from the feed mixtures of water + isopropanol, while 92 wt.% of water was removed from water + 1,4-dioxane feed mixtures at 30 °C. Flux of water increased for both the feed mixtures, while the selectivity decreased at higher feed water concentrations. The same trends were observed at 40 and 50 °C for 10, 15 and 20 wt.% of water mixtures containing isopropanol as well as 1,4-dioxane feed mixtures, which also covered their azeotropic composition ranges. Membrane performance was studied by calculating flux (J_p), selectivity (), pervaporation separation index (PSI) and enrichment factor (β). Permeation flux followed the Arrhenius trend over the range of temperatures investigated. It was found that by introducing a hydrophobic PMMA polymer into a hydrophilic PVA, the selectivity increased dramatically, while flux decreased compared to plain PVA, due to a loss in PVA chain relaxation.     

1,3,5,5-tetraphenyl-Δ3-1,2,4-triazolin-2-yl radical–properties in the controlled radical polymerization of poly(methyl methacrylate) and polystyrene

The triazoline derivative 1 was used as an additive in the chain-growth controlled radical polymerization of vinylic monomers to afford narrowly distributed polymers. This new system is applicable to styrene as well as to methacrylates. The monomer consumption and the variation of the molar mass were monitored with time. Thermal properties of the obtained polymers were also studied. After isolation of the polymers, the growth of the chains was re-initiated in the presence of a second monomer and yielded block copolymers.     

Synthesis of a novel liquid crystal rod–coil star block copolymer consisting of poly(methyl methacrylate) and poly{2,5‐bis[(4‐methoxy‐phenyl)oxycarbonyl] styrene} via atom transfer radical polymerization

A bromine capped star‐shaped poly(methyl methacrylate) (S‐PMMA‐Br) was synthesized with CuBr/sparteine/PT‐Br as a catalyst and initiator to polymerize methyl methacrylate (MMA) according to atom transfer radical polymerization (ATRP). Then, with S‐PMMA‐Br as a macroinitiator, a series of new liquid crystal rod–coil star block copolymers with different molecular weights and low polydispersity were obtained by this method. The block architecture {coil‐conformation of the MMA segment and rigid‐rod conformation of 2,5‐bis[(4‐methoxyphenyl)oxycarbonyl] styrene segment} of the four‐armed rod–coil star block copolymers were characterized by ¹H NMR. The liquid‐crystalline behavior of these copolymers was studied by differential scanning calorimetry and polarized optical microscopy. We found that the liquid‐crystalline behavior depends on the molecular weight of the rigid segment; only the four‐armed rod–coil star block copolymers with each arm's M_n,_GPC of the rigid block beyond 0.91 × 10⁴ g/mol could form liquid‐crystalline phases above the glass‐transition temperature of the rigid block. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 733–741, 2005     

Photoinitiated polymerization of methacrylic monomers in a poly(methyl methacrylate) matrix: A comparative study with other matrices (styrene–butadiene–styrene,polystyrene, and polybutadiene)

The kinetics and mechanism of the photoinitiated polymerization of 1,6‐hexanediol dimethacrylate (HDDMA) in a poly(methyl methacrylate) (PMMA) matrix were studied. The maximum double‐bond conversion, the maximum polymerization rate, the intrinsic reactivity, and the kinetic constants for propagation and termination were calculated. For this system, a reaction‐diffusion termination mechanism occurred from the start of the polymerization, and it was predominantly maintained until high monomer concentrations, probably because of the relatively high intermolecular attraction force between the PMMA matrix and HDDMA monomer. In addition, a comparative study of the photoinitiated polymerization of methacrylic monomers in four different polymeric matrices [styrene–butadiene–styrene (SBS), polystyrene (PS), polybutadiene (PB), and PMMA] was carried out. The aggregation state, vitreous or rubbery, of the monomer–matrix system and the intermolecular strength of attraction in the monomer–matrix system and growing macroradical and matrix systems were the principal factors influencing the kinetic and mechanistic behavior of these systems. When PB and SBS were used as matrices, crosslinked polymerized products were obtained as a result of the participation of double bonds of the matrix in the polymerization process (copolymerization). PS sequences in the SBS and PS matrices also took part in the polymerization process through the coupling of the benzylic radical to the growing macroradical. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 120–127, 2002     

Synthesis of poly[(2‐oxo‐1,3‐dioxolane‐ 4‐yl)methyl methacrylate‐co‐styrene] by addition reaction of carbon dioxide and its compatibility with poly(methyl methacrylate) or poly(vinyl chloride)

We investigated the chemical fixation of carbon dioxide (CO ₂) to a copolymer bearing epoxide and the application of the cyclic carbonate group containing copolymer to polymer blends. In the synthesis of poly[(2‐oxo‐1,3‐dioxolane‐4‐yl)methyl methacrylate‐co‐styrene] [poly(DOMA‐co‐St)] from the addition of CO ₂ to poly(glycidyl methacrylate‐co‐styrene) [poly(GMA‐co‐St)], quaternary ammonium salts showed good catalytic activity at mild reaction conditions. The CO ₂ addition reaction followed pseudo first‐order kinetics with the concentration of poly(GMA‐co‐St). In order to expand the applications of the CO ₂ fixed copolymer, polymer blends of this copolymer with poly(methyl methacrylate) (PMMA) or poly(vinyl chloride) (PVC) were cast from N,N′‐dimethylformamide (DMF) solution. Miscibility of blends of poly(DOMA‐co‐St) with PMMA or PVC have been investigated both by differential scanning calorimetry (DSC) and visual inspection of the blends, and the blends were miscible over the whole composition ranges. The miscibility behaviors were also discussed in terms of FT‐IR spectra. Copyright © 2002 John Wiley & Sons, Ltd.     

Synthesis of α‐maleimide‐ω‐dienyl heterotelechelic poly(methyl methacrylate) and its cyclization by the intramolecular Diels–Alder reaction

The synthesis of heterotelechelic poly(methyl methacrylate) (PMMA) containing α‐maleimide‐ω‐dienyl end‐groups and its subsequent intramolecular cyclization are described. The anionic polymerization of methyl methacrylate was carried out with 3‐tert‐butyldimethylsilyloxypropyl‐1‐lithium and 5‐bromo‐1,3‐pentadiene as the initiator and terminator, respectively, to synthesize α‐hydroxy‐ω‐dienyl‐PMMA. The introduction of the maleimide group to the α chain end by the reaction of the sodium salt of the polymer with N‐(3‐chloromethylphenyl)‐maleimide or N‐(3‐bromomethylphenyl)‐maleimide was not successful because of the nucleophilic addition of alkoxide to the carbon carbon double bond of the maleimide group. When 4,4′‐bismaleimidediphenylether was allowed to react with the alkoxide, the aimed α‐maleimide‐ω‐dienyl‐PMMA was obtained in a good yield. Ring closure by the intramolecular Diels–Alder reaction was carried out by the heating of the dilute polymer solution in tetrahydrofuran. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 237–246, 2000     

Energy migration in poly(N‐vinyl carbazole) and its copolymers with methyl methacrylate: Fluorescence polarization,quenching, and molecular dynamics

Fluorescence polarization and quenching measurements were used to examine intramolecular energy migration for poly(N‐vinyl carbazole) and copolymers of N‐vinyl carbazole with methyl methacrylate. Quenching measurements of the carbazole fluorescence by CCl₄ were performed in dilute solution in toluene, and fluorescence anisotropy, r, was measured for the chains dispersed in a solid matrix of poly(methyl methacrylate) (PMMA). The results suggested that the chains with a high carbazole content, that is, a high content of excimer trapping sites, do not show the highest values of the singlet energy‐migration rate. Isotropies, r^?1, of the samples in vitrified PMMA corroborated such conclusions. Molecular dynamics simulations on isotactic and syndiotactic trichromophoric copolymer fragments were used to obtain parameters related to the energy‐transfer process as a function of the methyl methacrylate content. The parameters from the simulations supported the interpretation of the experiments. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1615–1626, 2003     

Synthesis and characterization of L‐leucine containing chiral vinyl monomer and its polymer,poly(2‐(methacryloyloxyamino)‐4‐methyl pentanoic acid)

A chiral monomer containing L ‐leucine as a pendant group was synthesized from methacryloyl chloride and L ‐leucine in presence of sodium hydroxide at 4 °C. The monomer was polymerized by free radical polymerization in propan‐2‐ol at 60 °C using 2,2′‐azobis isobutyronitrile (AIBN) as an initiator under nitrogen atmosphere. The polymer, poly(2‐(Methacryloyloxyamino)‐4‐methyl pentanoic acid) is thus obtained. The molecular weight of the polymer was determined to be: M_w is 6.9 × 10³ and M_n is 5.6 × 10³. The optical rotation of both chiral monomer and its polymer varies with the solvent polarity. The amplification of optical rotation due to transformation of monomer to polymer is associated with the ordered conformation of chiral monomer unit in the polymeric chain due to some secondary interactions like H‐bonding. The synthesized monomer and polymer exhibit intense Cotton effect at 220 nm. The conformation of the chain segments is sensitive to external stimuli, particularly the pH of the medium. In alkaline medium, the ordered chain conformation is destroyed resulting disordered random coils. The ordered coiling conformation is more firmly present on addition of HCl. The polymer exhibits swelling‐deswelling characteristics with the change of pH of the medium, which is reversible. The Cotton effect decreases linearly with the increase of temperature which is reversible on cooling. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2228–2242, 2009