Mechanistic insight into domain formation and growth in a phase-separated Langmuir-Blodgett monolayer

The mechanism of the formation and growth of phase-separated domains in mixed arachidic acid (C19H39COOH) (AA) and perfluorotetradecanoic acid (C13F27COOH) (PA) monolayer films was investigated through a combination of surface pressure-area isotherm measurements and atomic force microscope (AFM) imaging. In the mixed AA-PA monolayer system, distinct discontinuous domains consisting primarily of AA form spontaneously in a surrounding continuous matrix enriched in PA. By varying the monolayer deposition conditions, including temperature, surface pressure, and the mechanical agitation of sample solutions, it was determined that phase-separated nuclei are formed initially in the bulk sample solution and further growth of domains proceeds on the subphase surface via an Ostwald ripening process involving the diffusion of AA from the matrix to the discontinuous domains. In addition, selective dissolution of the arachidic acid followed by in situ AFM imaging has allowed the visualization of the fusion of AA to the phase-separated domains and has highlighted some unusual pattern formation that occurs at low subphase temperatures.     

Characterization of domain growth kinetics in a mixed perfluorocarbon-hydrocarbon Langmuir-Blodgett monolayer

The rate of domain growth in phase-separated, mixed Langmuir-Blodgett (LB) monolayers of arachidic acid, C(19)H(39)COOH (AA) and perfluorotetradecanoic acid, C(13)F(27)COOH (PA) was tracked via atomic force microscope measurements. The growth rate of domains comprised of phase-separated AA was consistent with that predicted by the Lifshitz-Slyozov model for diffusion-limited Ostwald ripening. In addition to Ostwald ripening, some evidence for domain coalescence was also observed when LB films were deposited under conditions of low temperature and short incubation times, though this tendency disappeared at higher deposition temperatures.     

Rippled domain formation in phase-separated mixed Langmuir-Blodgett films

The morphology and composition of phase-separated Langmuir and Langmuir-Blodgett films of stearic acid (C17H35COOH) (SA) mixed with perfluorotetradecanoic acid (C13F27COOH) (PA) have been investigated using a combination of atomic force microscopy (AFM) measurements and surface pressure-area isotherms. At elevated surface pressures, the mixed film phase-separated to form a distinct series of lines (ripples), as opposed to the hexagons that have previously been observed with mixed films with longer alkyl chain fatty acids. At low surface pressures, phase separation is still observed, though a range of different domain structures was formed. The chemical composition of the phase-separated domains has been investigated by AFM-based compositional mapping, which has allowed unambiguous identification of the chemical composition of the domains. A simple mechanistic model describing how domain formation takes place in this system is presented.     

Phase-separation of mixed surfactant monolayers: a comparison of film morphology at the solid-air and liquid-air interfaces

The morphologies of phase-separated monolayer films prepared from two different binary mixtures of perfluorocarbons and hydrocarbons have been examined and compared, for the first time, at the solid-air and liquid-air interfaces. Films were comprised of binary mixtures of arachidic acid (C(19)H(39)COOH) with perfluorotetradecanoic acid (C(13)F(27)COOH) and of palmitic acid (C(15)H(31)COOH) with perfluorooctadecanoic acid (C(17)F(35)COOH). For both mixed systems, Langmuir Blodgett films on mica substrates consisted of polygonal domains of one surfactant dispersed in a continuous matrix of the other (arachidic acid in perfluorotetradecanoic acid or perfluorooctadecanoic acid in palmitic acid, respectively), consistent with previous reports. Real-time imaging of the air-water interface via Brewster angle microscopy revealed that comparable film morphology was present at the air-water interface and the solid-air interface over a wide range of surface pressures, and that for the arachidic acid-based mixture, domain growth dynamics at the air-water interface is consistent with that inferred from sequential "static" atomic force microscope images collected at the solid-air interface.     

An ensemble and single-molecule fluorescence microscopy investigation of phase-separated monolayer films stained with Nile Red

Phase-separated Langmuir-Blodgett monolayer films prepared from mixtures of arachidic acid (C19H39COOH) and perfluorotetradecanoic acid (C13F27COOH) were stained via spin-casting with the polarity sensitive phenoxazine dye Nile Red, and characterized using a combination of ensemble and single-molecule fluorescence microscopy measurements. Ensemble fluorescence microscopy and spectromicroscopy showed that Nile Red preferentially associated with the hydrogenated domains of the phase-separated films, and was strongly fluorescent in these areas of the film. These measurements, in conjunction with single-molecule fluorescence imaging experiments, also indicated that a small sub-population of dye molecules localizes on the perfluorinated regions of the sample, but that this sub-population is spectroscopically indistinguishable from that associated with the hydrogenated domains. The relative importance of selective dye adsorption and local polarity sensitivity of Nile Red for staining applications in phase-separated LB films as well as in cellular environments is discussed in context of the experimental results.     

Probing organic layers on the TiO2(110) surface

In this work, we use first principles simulations to provide features of the dynamic scanning force microscopy imaging of adsorbed organic layers on insulating surfaces. We consider monolayers of formic (HCOOH) and acetic (CH(3)COOH) acid and a mixed layer of acetic and trifluoroacetic acids (CF(3)COOH) on the TiO(2)(110) surface and study their interaction with a silicon dangling bond tip. The results demonstrate that the silicon tip interacts more strongly with the substrate and the COO(-) group than the adsorbed acid headgroups, and, therefore, molecules would appear dark in images. The pattern of contrast and apparent height of molecules is determined by the repulsion between the tip and the molecular headgroups and by significant deformation of the monolayer and individual molecules. The height of the molecule on the surface and the size of the headgroup play a large role in determining access of the tip to the substrate and, hence, the contrast in images. Direct imaging of the molecules themselves could be obtained by providing a functionalized tip with attraction to the molecular headgroups, for example, a positive potential tip.     

Miscibility and segregated structures in mixed Langmuir monolayers

The phase behavior and morphology of segregated structures are considered for mixed Langmuir monolayers, which comprise a type of supramolecular polymer having a complex internal structure mixed with a long chain fatty acid. We fabricated two different series of mixed monolayers from a polyglutamate (PG) copolymer having 30% octadecyl ester side chains and 70% methyl ester side chains and fatty acids. These mixed monolayers deposited on a solid substrate were studied by pressure-area diagram measurements, X-ray analysis, and atomic force microscopy. Stearic acid (STA) and hexacosanoic acid (HCA) with alkyl chain lengths of 17 and 25 carbon atoms, respectively, were used as low molecular weight components. For the mixture PG:STA, where the length of the STA molecules is comparable to the length of the PG side chains, we observed the formation of partially miscible monolayers. These mixtures exhibit a nanometer scale domain morphology formed by the STA molecules dissolved in the outer shell of the PG monolayer. In contrast, for the PG:HCA mixture we observed a strong tendency for microphase separation and the formation of well-defined submicron segregated structures in the monolayers. Lateral compression of the mixed monolayers to a point close to the collapse pressure promotes microphase separation in both types of mixed monolayers with the formation of anisotropic surface morphology and oriented domains.     

Water evaporation rates across hydrophobic acid monolayers at equilibrium spreading pressure

The effect of alkanoic acid [CH(3)(CH(2))(n-2)COOH; HCn] and perfluoroalkanoic acid [CF(3)(CF(2))(n-2)COOH; FCn] monolayers on the water evaporation rate was investigated by thermogravimetry tracing the decrease in amount of water with time. The evaporation rate from the surface covered by a monolayer was measured as a function of temperature and hydrophobic chain length of the acids, where the monolayer was under an equilibrium spreading pressure. From thermal behavior of the crystallized acids, their solid states are C-type in crystalline state over the temperature range from 298.2 to 323.2 K. The dry air was flowed through a furnace tube of a thermogravimetry apparatus at the flow rate of 80 mL min(-1), where the evaporation rate becomes almost constant irrespective of the flow rate. The temperature dependence of the evaporation rate was analyzed kinetically to evaluate the activation energy and thermodynamics values for the activated complex, which demonstrated that these values were almost the same for both alkanoic acids and perfluoroalkanoic acids, although the effect of perfluoroalkanoic acids on the evaporation rate was smaller than that of corresponding hydrogenated fatty acids. The difference in the evaporation rate between FCn and HCn was examined by atomic force microscopy (AFM), Brewster angle microscopy (BAM), surface potential (DeltaV) at equilibrium spreading pressure, and Langmuir curve (pi-A isotherm), and their results were consistent and supported the difference.     

Externally applied electric fields on immiscible lipid monolayers: repulsion between condensed domains precludes domain migration

Lipid and protein molecules anisotropically oriented at a hydrocarbon-aqueous interface configure a dynamic array of self-organized molecular dipoles. Electrostatic fields applied to lipid monolayers have been shown to induce in-plane migration of domains or phase separation in a homogeneous system. In this work, we have investigated the effect of externally applied electrostatic fields on different lipid monolayers exhibiting surface immiscibility. In the monolayers studied, lipids in the condensed state segregate in discontinuous round-shaped domains, with the lipid in the liquid-expanded state forming the continuous phase. The use of fluorescent probes with selective phase partitioning allows analyzing by epifluorescence microscopy the migrations of the domains under the influence of inhomogeneous electric fields applied to the surface. Our observations indicate that a positive potential applied to an electrode placed over the monolayer promotes a repulsion of the domains until a steady state is reached, indicating the presence of a force opposed to the externally applied electric force. The experimental results were modeled by considering that the opposing force is generated by the dipole-dipole repulsion between the domains.     

Atomic force microscopy (AFM)-based nanografting for the study of self-assembled monolayer formation of organophosphonic acids on Al2O3 single-crystal surfaces

Adsorption, stability, and organization kinetics of organophosphonic acids on single-crystalline alumina surfaces were investigated by means of atomic force microscopy (AFM)-based imaging, nanoshaving, and nanografting. AFM friction and phase imaging have shown that chemical etching and subsequent annealing led to heterogeneities on single-crystalline surfaces with (0001) orientation. Self-assembly and stability of octadecylphosphonic acid (ODPA) were shown to be strictly dependent upon the observed heterogeneities of the surface termination, where it was locally shown that ODPA can loosely or strongly bind on different terminations of the crystal surface. Organization kinetics of ODPA was monitored with nanografting on (0001) surfaces. Supported by measurements of surface wettability and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS), it was demonstrated that the lack of organization within the protective adsorbed hexylphosphonic acid (HPA) monolayer on alumina surfaces facilitated the reduced confinement effect during nanografting, such that kinetics information on the organization process of ODPA could be obtained.     

Study of the Air-Water Interfacial Properties of Biodegradable Polyesters and Their Block Copolymers with Poly(ethylene glycol)

It has been reported that the surface pressure-area isotherm of poly(d,l-lactic acid-ran-glycolic acid) (PLGA) at the air-water interface exhibits several interesting features: (1) a plateau at intermediate compression levels, (2) a sharp rise in surface pressure upon further compression, and (3) marked surface pressure-area hysteresis during compression-expansion cycles. To investigate the molecular origin of this behavior, we conducted an extensive set of surface pressure and AFM imaging measurements with PLGA materials having several different molecular weights and also a poly(d,l-lactic acid-ran-glycolic acid-ran-caprolactone) (PLGACL) material in which the caprolactone monomers were incorporated as a plasticizing component. The results suggest that (i) the plateau in the surface pressure-area isotherm of PLGA (or PLGACL) occurs because of the formation (and collapse) of a continuous monolayer of the polymer under continuous compression; (ii) the PLGA monolayer becomes significantly resistant to compression at high compression because under that condition the collapsed domains become large enough to become glassy (such behavior was not observed in the nonglassy PLGACL sample); and (iii) the isotherm hysteresis is due to a coarsening of the collapsed domains that occurs under high-compression conditions. We also investigated the monolayer properties of PEG-PLGA and PEG-PLGACL diblock copolymers. The results demonstrate that the tendency of PLGA (or PLGACL) to spread on water allows the polymer to be used as an anchoring block to form a smooth biodegradable monolayer of block copolymers at the air-water interface. These diblock copolymer monolayers exhibit protein resistance.     

RNA and DNA association to zwitterionic and charged monolayers at the air-liquid interface

The objective of this work is to establish under which conditions short RNA molecules (similar to miRNA) associate with zwitterionic phospholipids and how this differs from the association with cationic surfactants. We study how the base pairing (i.e., single stranded versus double stranded nucleic acids) and the length of the nucleic acid and the charge of the lipid/surfactant monolayer affect the association behavior. For this purpose, we study the adsorption of nucleic acids to monolayers composed of dipalmitoyl phosphatidylcholine (DPPC) or dioctadecyl-dimethyl-ammoniumbromide (DODAB) using the surface film balance, neutron reflectometry, and fluorescence microscopy. The monolayer studies with the surface film balance suggested that short single-stranded ssRNA associates with liquid expanded zwitterionic phospholipid monolayers, whereas less or no association is detected for double-stranded dsRNA and dsDNA. In order to quantify the interaction and to determine the location of the nucleic acid in the lipid/surfactant monolayer we performed neutron reflectometry measurements. It was shown that ssRNA adsorbs to and penetrates the liquid expanded monolayers, whereas there is no penetration of nucleic acids into the liquid condensed monolayer. No adsorption was detected for dsDNA to zwitterionic monolayers. On the basis of these results, we propose that the association is driven by the hydrophobic interactions between the exposed hydrophobic bases of the ssRNA and the hydrocarbon chains of the phospholipids. The addition of ssRNA also influences domain formation in the DPPC monolayer, leading to fractal-like interconnected domains. The experimental results are discussed in terms of the implication for biological processes and new leads for applications in medicine and biotechnology.     

Self-assembly of asymmetric fan-shaped dendrimers with different generation numbers at the air-water interface

Monolayer formation of two dendrimers containing a hydrophilic core group (COOH) and hydrophobic peripheral groups (anthracene and aryl ether tail groups), 4-{10-[4-(3,5-bis-benzyloxy)-phenyl]-anthracen-9-yl}-benzoic acid (G1) and 4-(10-{4-[3,5-bis-(3,5-bis-benzyloxy)-benzyloxy]-phenyl}-anthracen-9-yl)-benzoic acid (G2), were studied. To understand the mechanism of the self-assembly of these molecules, we measured the surface pressure-surface area (Pi- A) isotherm and investigated the surface texture of Langmuir-Blodgett monolayers transferred onto hydrophilic silicon wafers. Both dendrimers form circular domains at the onset point of surface pressure as a result of the difference in hydrophobicity between the core group and the peripheral end group. The core group has a functional group at the end of dendrimer and can be anchored on the water surface. Upon further compression, monolayer of G1 shows a domain of molecules whereas a monolayer of G2 is aligned in the direction of compression at 10 mN/m. At higher surface pressure (20 mN/m), G1 molecules have several aggregates of domains, but G2 molecules maintain their ordering. These results were confirmed by the electron density profile of G1 and G2 monolayers transferred to silicon substrates, as measured by X-ray reflectivity.     

The nature of alkanethiol self-assembled monolayer adsorption on sputtered gold substrates

A detailed study of the self-assembly and coverage by 1-nonanethiol of sputtered Au surfaces using molecular resolution atomic force microscopy (AFM) and scanning tunneling microscopy (STM) is presented. The monolayer self-assembles on a smooth Au surface composed predominantly of [111] oriented grains. The domains of the alkanethiol monolayer are observed with sizes typically of 5-25 nm, and multiple molecular domains can exist within one Au grain. STM imaging shows that the (4 x 2) superlattice structure is observed as a (3 x 2) structure when imaged under noncontact AFM conditions. The 1-nonanethiol molecules reside in the threefold hollow sites of the Au[111] lattice and aligned along its [112] lattice vectors. The self-assembled monolayer (SAM) contains many nonuniformities such as pinholes, domain boundaries, and monatomic depressions which are present in the Au surface prior to SAM adsorption. The detailed observations demonstrate limitations to the application of 1-nonanethiol as a resist in atomic nanolithography experiments to feature sizes of approximately 20 nm.     

Scanning force microscopic study of surface structure and properties of (alkylsilane/ fluoroalkylsilane) mixed monolayers

(Alkylsilane/fluoroalkylsilane) mixed monolayers were immobilized covalently on a silicon wafer surface with stable surface structure. Atomic force microscopic observation of the n-octadecyltrichlorosilane (OTS)/[2-(perfluorooctyl)ethyl]trichlorosilane (FOETS) mixed monolayer revealed that the crystalline OTS circular domains of ca. 1–2μm in diameter were surrounded by a sealike amorphous FOETS matrix, even though the molar fraction of OTS was above 75%. Also, the phaseseparated monolayer can be prepared from FOETS, and a non-polymerizable and crystallizable amphiphile such as lignoceric acid (LA). The phase separation of the (alkylsilane/fluoroalkylsilane) mixed monolayer might be attributed to both faster spreading of FOETS molecules on the water surface and the crystallizable characteristics of alkylsilane molecules. The mixed monolayer of crystalline alkylsilane (OTS) and amorphous alkylsilane (n-dodecyltrichlorosilane, DDTS) formed a phase-separated structure on the water surface because of the crystallizable characteristics of OTS. Lateral force microscopic (LFM) observation revealed that the order of the magnitude of lateral force generated against the silicon nitride tip was: n-triacontyltrichlorosilane (TATS) domain with longer alkyl chain > amorphous FOETS matrix > crystalline OTS domain. On the other hand, scanning viscoelasticity microscopic observation revealed that the order of the magnitude of modulus was: Si substrate > crystalline OTS domain > amorphous FOETS matrix.     

The equilibria of phosphatidylcholine-fatty acid and phosphatidylcholine-amine in monolayers at the air/water interface

Monolayers of phosphatidylcholine, fatty acid and amine and binary mixtures phosphatidylcholine-fatty acid or phosphatidylcholine-amine were investigated at the air/water interface. Phosphatidylcholine (lecithin, PC), stearic acid (SA), palmitic acid (PA), decanoic acid (DA) and decylamine (DE) were used to the experiment. The surface tension values of pure and mixed monolayers were used to calculate π-A isotherms. The surface tension measurements were carried out at 22°C using an improved Teflon trough and a Nima 9000 tensiometer. The Teflon trough was filled with a subphase of triple-distilled water. Known amounts of lipid dissolved in 1-chloropropane were placed at the surface using a syringe. The interactions between lecithin and fatty acid as well as phosphatidylcholine and amine result in significant deviations from the additivity rule. An equilibrium theory to describe the behaviour of monolayer components at the air/water interface was developed in order to obtain the stability constants of PC-SA, PC-PA, PC-DA and PC-DE complexes. We considered the equilibrium between the individual components and the complex and established that lecithin and fatty acid as well as phosphatidylcholine and amine formed highly stable 1:1 complexes.     

Molecular order and disorder in the frictional response of alkanethiol self-assembled monolayers

Molecular processes in the frictional response of an alkanethiol monolayer, self-assembled on a Au(111) surface, are studied by means of high-resolution friction force microscopy in ultrahigh vacuum. With increasing load, three regimes are observed on defect-free domains of the monolayer: smooth sliding with negligible friction, regular molecular stick-slip motion with increasing friction, and the onset of wear in the monolayer. Molecular contrast in the lateral force is found for inequivalent molecules within the unit cell of the c(4 × 2) superstructure. Significant differences in the frictional response are found between defect-free domains and areas including a domain boundary. Friction increases by an order of magnitude on domain boundaries in connection with irregular stick-slip motion. This increased friction at domain boundaries is observed at loads below the onset of wear.     

Ultrathin-film growth of para-sexiphenyl (II): formation of large-size domain and continuous thin film

The large-size domain and continuous para-sexiphenyl (p-6P) ultrathin film was fabricated successfully on silicon dioxide (SiO2) substrate and investigated by atomic force microscopy and selected area electron diffraction. At the optimal substrate temperature of 180 degrees C, the first-layer film exhibits the mode of layer growth, and the domain size approaches 100 microm(2). Its saturated island density (0.018 microm(-2)) is much smaller than that of the second-layer film (0.088 microm(-2)), which begins to show the Volmer-Weber growth mode. The characteristic of liquid-like crystal of p-6P monolayer film and the adequate diffusion of p-6P molecules dominate the formation of large-size domain. The coalescence of large-size domains offers the possibility to grow high-quality p-6P monolayer film which provides excellent substrate for weak epitaxy growth of phthalocyanine compounds.     

Incorporation and exclusion of long chain alkyl halides in fatty acid monolayers at the air-water interface

Mixed monolayers of deuterated palmitic acid C(15)D(31)COOH (dPA) and deuterated stearic acid C(17)D(35)COOH (dSA) with 1-bromoalkanes of different alkyl chain length (C(4) to C(16)) at the air-water interface were investigated. Alkanes and 1-chlorohexadecane ClC(16)H(33) (ClHex) were also studied to compare the effects of the halogen on the mixed monolayers. Surface pressure-area isotherms and Brewster angle microscopy (BAM) were used to obtain the organization and phase behavior, providing a macroscopic view of the mixed monolayers. A molecular-level understanding of the interfacial molecular organization and intermolecular interactions was obtained by using vibrational sum frequency generation (SFG) spectroscopy and infrared reflection-absorption spectroscopy (IRRAS). It was found that from the alkyl halide molecules investigated 1-bromopentadecane, BrC(15)H(31) (BrPent), 1-bromohexadecane, BrC(16)H(33) (BrHex), and ClHex incorporate into the fatty acid monolayers. Alkanes of 15- and 16-carbon chain length do not incorporate into the fatty acid monolayer, which suggests that the halogen is needed for incorporation. Isotherms and spectra suggest that BrHex molecules are squeezed out, or excluded, from the fatty acid monolayer as the surface pressure is increased, while BAM images confirm this. Additionally, SFG spectra reveal that the alkyl chains of both fatty acids (dPA and dSA) retain an all-trans conformation after the incorporation of alkyl halide molecules. BAM images show that at low surface pressures BrHex does not affect the two-dimensional morphology of the dPA and dSA domains and that BrHex is miscible with dPA and dSA. We also present for the first time BAM images of BrHex deposited on a water surface, which reveal the formation of aggregates while the surface pressure remains unchanged from that of neat water.     

Properties of two-component Langmuir monolayer of single chain perfluorinated carboxylic acids with dipalmitoylphosphatidylcholine (DPPC)

The surface pressure (π)– and the surface potential (ΔV)–area (A) isotherms were obtained for two-component monolayers of four different perfluorocarboxylic acids (FCns; perfluorododecanoic acid: FC12, perfluorotetradecanoic acid: FC14, perfluorohexadecanoic acid: FC16, perfluorooctadecanoic acid: FC18) with dipalmitoylphosphatidylcholine (DPPC) on substrate solution of 0.15 M NaCl (pH 2.0) at 298.2 K as a function of compositions in the mixtures by employing the Wilhelmy method, the ionizing electrode method, the fluorescence microscopy, and the atomic force microscopy. The data for the two-component monolayers on these systems were analyzed in terms of the additivity rule. Assuming a regular surface mixture, the Joos equation which allows one to describe the collapse pressure of a two-component monolayer with miscible components was used to declare the miscibility of the monolayer state, and an interaction parameter and an interaction energy were calculated. The new finding was that FCns and DPPC are miscible or immiscible depending on chain length increment of fluorocarbon part. That is, FC12/DPPC monolayer was perfectly miscible, and FC14/DPPC, and FC16/DPPC (0 ≤ X_FC16 ≤ 0.3) monolayers were partially miscible. While FC16/DPPC (0.3 < X_FC16 < 1) and FC18/DPPC systems are immiscible in the monolayer state. Furthermore, the mean molecular area, the surface dipole moment, and the phase diagrams enabled us to estimate the molecular orientation of four different perfluorocarboxylic acids/DPPC in the two-component monolayer state. One type of phase diagrams was obtained and classified into the positive azeotropic type. The miscibility of FCns and DPPC in the monolayer was also supported by fluorescence microscopy and atomic force microscopy. FC12/DPPC, FC14/DPPC and FC16/DPPC (0 ≤ X_FC16 ≤ 0.3) two-component monolayers on 0.15 M NaCl (pH 2) showed that FC12, FC14 and FC16 (0 ≤ X_FC16 ≤ 0.3) can dissolve or partially dissolve the ordered solid DPPC domains formed upon compression. This indicates that these fluorinated amphiphiles soften or harden the lipid depending on their chain length.