Speciation of Cr(III) and Cr(VI) by reversed phase high-performance liquid chromatography using UV-detection

Summary A method for the simultaneous determination of Cr(III) and Cr(VI) in water samples is described. The different reaction products of Cr(III) and Cr(VI) species with ammonium pyrrolidinedithiocarbamate (APDC) are extracted with ethyl acetate and determined by reversed phase HPLC using UV-detection. The procedure is optimized and its detection limit accordingly improved as compared to literature data. The detection limits achieved are 2.4 g/l for Cr(III) and 2.1 g/l for Cr(VI) and the calibration curves are linear between 5 g/l and 5000 g/l. For the speciation of Cr, APDC was demonstrated to be more suitable as chelating agent than sodium diethyldithiocarbamate (NaDDC). The procedure was applied to the determination of both Cr species in galvanic waste waters and its accuracy was approved by comparing the results (at the 100 g/l level) with those of a photometric determination of Cr(VI) species.Dedicated to Professor Dr. Wilhelm Fresenius on the occasion of his 80th birthday     

New specific methods for the detection of chromium(VI) and vanadium(V) using primaquin

Summary New specific methods have been developed for the detection of chromium(VI) and of vanadium(V), based on the formation of a purple color with primaquin in concentrated sulfuric acid solution. The identification limits and dilution limits have been determined to be 0.05g, 11 000 000 for chromium(VI) and 0.1g, 1500 000 for vanadium(V) respectively.

---

Neue spezifische Methoden zum Nachweis von Cr(VI) und V(V) mit Primachin

Zusammenfassung Die neu ausgearbeiteten Methoden sind spezifisch und beruhen auf der Bildung einer Purpur-Färbung mit Primachin in konz. Schwefelsäure. Die Nachweisgrenzen und Verdünnungsgrenzen betragen 0,05g bzw. 11 000 000 für Cr(VI) und 0,1g bzw. 1500 000 für V(V).

     

Complexes of acid amides with polar aprotic solvents. II. Thermal analysis of the complexes of bis(N-phenyl)-pyromellitic acid amide with dimethylformamide,dimethylacetamide, N-methylpyrrolidone and dimethylsulfoxide

The synthesis of solid complexes of bis(N-phenyl)-pyromellitic acid amide (PMA) with aprotic solvents (dimethylformamide, dimethylacetamide,N-methylpyrrolidone and dimethylsulfoxide) and their thermal analysis (evolved gas analysis using mass spectroscopy, and thermogravimetry) is described. In all cases, the composition of the complexes was found to be 1PMA: 2 solvent. The activation energy of the decomposition process of the complexes was determined from TG data. The values found were between 40 and 80 kJ/mol.

---

Zusammenfassung Es wird die Synthese der festen Komplexe von Bis(N-phenyl)-pyro-mellithsäureamid (PMA) mit aprotischen Lösungsmitteln (Dimethylformamid, Dimethylacetamid, N-Methylpyrrolidon und Dimethylsulfoxid) und deren thermische Analyse (massenspektrometrische Analyse der gebildeten Gase und Thermogravimetrie) beschreiben. In allen untersuchten Komplexen betrug das Zahlenverhältnis von PMA- zu Lösungsmittelmolekülen 21. Die für die Zersetzung der Komplexe aufzubringenden Aktivierungsenergien wurden aus TG-Daten bestimmt. Die ermittelten Werte lagen zwischen 40 und 80 kJ·mol^–1.

---

- (MTA) () -(N-)-- () ( , , N- , ). , []₁: [Sol]₂. , 40–80 /.

     

2-(α-Pyridyl)-thioquinaldinamide (PTQA)-A novel fluorimetric reagent in inorganic trace analysis. I: The nonextractive,nonquenching fluorescent method for the determination of chromium(VI)

A direct fluorimetric method for determining Cr(VI) in aqueous solutions is described. The nonfluorescent reagent 2-(-pyridyl)-thioquinaldinamide (PTQA) and Cr(VI) interact to produce an intensely fluorescent species [_ex(max) 360 nm; _em(max) 500 nm] showing constant and maximum fluorescence intensity in slightly acidic media (0.18N–1.08N H₂SO₄). The fluorescence attains its maximum value within 5 min and remains unchanged for 24 h. The system obeys Beer's law from 2 ng/ml to 0.8 g/ml of Cr(VI). Over sixty cations, anions and complexing agents are without any effect on the fluorimetric determination of 0.1 g/ml of Cr(VI). The method has been tested with synthetic mixtures, steels, solutions containing both Cr(III) and Cr(VI), and environmental samples.     

Determination of Cr(VI) and Cr(III) by Using Activated Carbon-Atomic Absorption Spectrometry

A method for the separation and preconcentration of Cr(III) and Cr(VI) on activated carbon in presence of diethyldithiocarbamate as a complexing reagent was optimized. The method makes it possible to achieve 200- to 500-fold Cr(VI) concentrating depending on the initial volume of the solution to be analysed and the final volume eluted. The Cr(VI) concentration in the background solution determined with RSD 30% was equal to 1.5 g L. The limit of Cr(VI) determination was equal to 0.9 g L.     

Simultaneous determination of chromium(VI) and chromium(III) by flame atomic absorption spectrometry with a chelating ion-exchange flow injection system

Summary Simultaneous Determination of Chromium(VI) and Chromium(III) by Flame Atomic Absorption Spectrometry with a Chelating Ion-Exchange Flow Injection System A simple method is described for the simultaneous determination of chromium(VI) and chromium(III) in a flow injection system comprising chelating ion-exchange and flame atomic absorption spectrometry. Sampling rates for 2001 and 1 ml sample volumes were 120 and 60 h^–1 (240 and 120 speciations per hour), respectively. Typical relative standard deviations were 0.52% for Cr(VI) (0.50g ml^–1 and 0.67% for Cr(III) (0.10,g ml^–1) and the corresponding limits of detection were 85 ng ml^–1, and 16 ng ml^–1, respectively.On leave from University of Belgrade.     

Study of Cr(VI)-2-oximinodimedone dithiosemicarbazone reaction and simultaneous determination of Cr(VI) and Fe(III)

Summary 2-Oximinodimedone dithiosemicarbazone reacts with Cr(VI) in strongly acid medium. The orange colour obtained has been used to propose a spectrophotometric method of Cr(VI) determination in the concentration range 0.40–9.5g ml^–1 (=5600 mole^–1-cm^–1 at 485 nm). The stoichiometry of the reaction is 32 (reagentCr(VI)) which is in accordance with the oxidation reaction of the reagent by Cr(VI). The method has been applied to the determination of Cr(VI) and Fe(III) in ceramic materials.

---

Eine Studie zur Cr(VI)-2-oximinodimedondithiosemicarbazon-Reaktion und die simultane Bestimmung von Cr(VI) und Fe(III)

Zusammenfassung 2-Oximinodimedonedithiosemicarbazon reagiert in stark saurem Milieu mit Cr(VI). Die orange Farbe kann im Konzentrationsbereich von 0.4–9,5g/ml zur spektrophotometrischen Cr(VI)-Bestimmung verwendet werden (=5600 1 mol^–1cm^–1bei 485 nm). Die Stöchiometrie der Reaktion ist 32 (Reagens: Cr(VI)) und entspricht der Oxidation des Reagens durch Cr(VI). Die Methode wurde zur Bestimmung von Cr(VI) und Fe(III) in keramischen Materialien eingesetzt.

     

Extractive spectrophotometric determination of dioxouranium(VI) with the sodium salt of hexamethyleneiminecarbodithioate

The optimum conditions for the extractive spectrophotometric determination of dioxouranium(VI) with hexamethyleneiminecarbodithioate(HMICdt) have been established. Dioxouranium(VI) reacts with this ligand at pH 4.5 to form a yellowish-orange uncharged 12 metal-ligand complex which can be extracted by chloroform. The calibration graph was linear in the range of 1–20 g ml^–1 of dioxouranium(VI) at 335 nm. The molar absorptivity of the extracted species is 5.952×10³ l mol^–1 cm^–1 with Sandell's sensitivity of 0.04 g cm^–2. The average of 10 determinations of dioxouranium was 49.75 g for the samples containing 50 g of U(VI) and the variation from the mean at 95% confidence limit was 49.75±0.5955.     

Spectrophotometric determination of microgram amounts of chromium(VI) and total chromium in waste water

Summary A spectrophotometric method has been developed for the determination of chromium in waste water with 5-Br-PADAP (2-(5-brorno-2-pyridylazo)-5-diethylaminophenol). Chromium(III) forms a blue-purple complex at pH 4.7 upon heating. The color is very stable and is highly sensitive for chromium. At 600 nm it obeys Beer's law in the concentration range of 0–15g of Cr(III) per 25 ml. The sensitivity and molar absorptivity of the reaction are 0.00065g of Cr(III) per cm² and 7.93×10⁴1 · mole^–1 · cm^–1, respectively. The continuous variation and molar ratio methods indicate that chromium forms 12 complex with the ligand.

---

Spektrophotometrische Bestimmung von Mikrogramm-Mengen Chrom(VI) und Gesamt-Mengen Chrom in Abwasser

Zusammenfassung Eine spectrophotometrische Methode zur Bestimmung von Chrom in Abwasser mit 5-Br-PADAP wurde ausgearbeitet. Chrom(III) bildet mit 5-Br-PADAP bei pH 4,7 durch Erhitzen einen blaupurpurnen Komplex. Die Farbe ist sehr beständig. Bei 600 nm entspricht die Färbung dem Beerschen Gesetz zwischen 0 und 15g Cr(III)/25 ml. Die Empfindlichkeit der Reaktion beträgt 0,00065g Cr(III)/cm² und die molare Absorption 7.93×10⁴ 1 · mol^–1 · cm^–1. Die Untersuchung nach Job ergab für den Komplex das Molverhältnis Cr:Reagens=12.

     

A new spot test reagent for chromium(VI), vanadium(V), and hexacyanoferrate(III) ions: the schiff base from 4,4′-methylenedianiline and 4-dimethylaminobenzaldehyde

Summary A new Schiff base, bis(4-dimethylaminobenzylidine)4,4-methylenedianiline (I) has been prepared by reacting 4-dimethylaminoben-zaldehyde with 4,4-methylenedianiline. A 1% solution ofI in conc. sulphuric acid gives a deep red or blood red colour with Cr(VI), and V(V), and a deep rose red colour with [Fe(CN)₆]^3-. The limits of detection and dilution are 0.7 g, 171,000 for Cr(VI); 5 g, 110,000 for V(V); and 7 g, 17,100 for [Fe(CN)₆]^3-. Cr(III), V(IV), and [Fe(CN)₆]^4- do not interfere. The effects of common anions and cations are reported.

---

Zusammenfassung Durch Umsetzung von 4-Dimethylaminobenzaldehyd mit 4,4-Methylen-dianilin wurde eine neue Schiffsche Base hergestellt, deren 1%ige Lösung in konz. Schwefelsäure eine tiefrote oder blutrote Farbe mit Cr(VI) und V(V), eine tiefrosa Farbe mit [Fe(CN)₆]^3– gibt. Die Nachweisgrenzen bzw. die Grenzkonzentrationen betragen: 0,7 g, 171000 für Cr(VI), 5 g, 110000 für V(V) und 7 g, 17100 für [Fe(CN)]₆ ^3–. Cr(III), V(IV) und [Fe(CN)₆]^4– stören nicht. Der Einfluß gängiger Anionen und Kationen wird angegeben.

     

Controlled-potential coulometric studies on fluoride and sulphate complexes of neptunium (VI)

Fluoride and sulphate complexing of Np(VI) has been studied by controlled-potential coulometry at a constant ionic strength. The values of ₁ ^* and ₂ ^* for fluoride complexes were found to be 9.4 and 8.9, respectively, at an ionic strength =0.5. At an ionic strength =1.0, ₁ ^* and ₂ ^* obtained were 6.6 and 10.5, respectively. Sulphate complexing of Np(VI) was studied only at an ionic strength =0.5. The value of ₁ ^* obtained was 5.6.     

Thermal analysis of chromium(III) and chromium(VI) systems with silica and sodium silicate

Sodium silicate, or a mixture of silica and sodium carbonate, reacts with chromium(III) oxide in the presence of oxygen to give sodium chromate, within the approximate temperature range 300–900°. Above 900° the reaction is reversed and chromium(III) oxide regenerated.

---

Zusammenfassung Natriumsilikat oder eine Mischung von Siliziumdioxid mit Natriumkarbonat ergeben bei der Reaktion mit Chrom(III)oxid in Gegenwart von Luft im Temperaturbereich zwischen 300° und 900° Natriumchromat. Über 900° wird die Reaktion umgekehrt und Chrom(III)oxid zurückgebildet.

---

Résumé Le silicate de sodium ou un mélange de silice et de carbonate de sodium réagissent, en présence d'oxygène, avec l'oxyde de chrome trivalent pour former le chromate de sodium, approximativement entre 300 et 900°. Au-dessus de 900°, la réaction s'inverse et l'oxyde de chrome(III) est régénéré.

---

(III) , 3002900°. 900° .

---

---

We thank Messrs. Albright and Wilson for a grant (to D. A. F.)     

Speciation studies by capillary electrophoresis- Simultaneous determination of chromium(III) and chromium(VI)

A method for the simultaneous determination of chromium(III) and chromium(VI) by capillary electrophoresis (CE) has been developed. The chromium(III) has been chelated with 1,2-cyclohexanediaminetetraacetic acid (CDTA) in order to impart a negative charge and similar mobility to both the chromium(III) and the chromium(VI) species. The effects of the amount of the reagent, pH and heating time required to complete the complexation have been studied. Factors affecting the CE behaviour such as the polarity of electrodes and the pH of electrophoretic buffer have been investigated. The separated species have been monitored by direct UV measurements at 214 nm. The detection limits achieved are 10 g/l for Cr(VI) and 5 g/l for Cr(III) and linear detector response is observed up to 100 mg/l. The procedure has been applied to the determination of both chromium species in industrial electroplating samples and its accuracy was checked by comparing the results (as total chromium) with those of atomic absorption spectrometry. No interference occurred from transition metal impurities under optimized separation conditions. The method is also shown to be feasible for determining Cr(III) as well as other metal ions capable to form complexes with CDTA (like iron(III), copper(II), zinc(II) and manganese(II)) in pharmaceutical preparations of essential trace elements.     

Etude,par atd,du diagramme d'etat de l'arsenic et mesure de son enthalpie de fusion aux conditions du point triple

Résumé L'ATD de l'arsenic placé dans des ampoules à volume mort non nul montre deux types de courbes selon la valeur du rapportV/m entreV, volume interne de l'ampoule etm, masse d'échantillon.La répartition des domaines de phases, dans le planT — V/m, est décrite. Elle permet de déterminer le volume spécifique de la vapeur d'arsenic au point triple. Le résultat obtenu (7.90 mm³ · mg^–1) s'accorde avec le fait que la vapeur d'arsenic est alors constituée de molécules tétraatomiques. Les courbes d'ATD obtenues permettent enfin une estimation de l'enthalpie de fusion de l'arsenic au point triple. La valeur obtenue (24.2 kJ · mol^–1) est en bon accord avec les résultats décrits dans la littérature.

---

For DTA studies, arsenic samples are placed in silica ampoules which are evacuated and sealed. Since the arsenic sample does not fill the whole inner volume of the ampoule, theV/m ratio (whereV is the inner volume andm is the weight of the sample) can be varied. Depending on theV/m value, two kinds of curves are obtained. The distribution of phase regions in theT vs.V/m space is described. This distribution makes it possible to determine the specific volume of arsenic vapor at the triple point. The result obtained (7.90 mm³ mg^–1) is consistent with As₄ molecules in the vapor phase. From the DTA curves obtained, the heat of fusion of arsenic is estimated. The result (24.2 kJ mol^–1) is consistent with the values reported in the literature.

---

Zusammenfassung DTA-Untersuchungen von Arsenik in Ampullen mit einem von Null verschiedenem Totvolumen, weisen je nach Verhältnis des inneren VolumensV der Ampulle und der Massem der Probe,V/m, zwei Typen von Kurven auf.Die Verteilung der Phasenbereiche in der FunktionT-V/m wird beschrieben. Sie gestattet die Bestimmung des spezifischen Volumens des Arsenikdampfes am Tripelpunkt. Das erhaltene Ergebnis (7.90 mm³ · mg^–1) stimmt mit der Existenz von As₄-Molekülen in der Dampfphase überein.Aus den erhaltenen DTA-Kurven wurde die der Schmelzenthalpie von Arsenik abgeschätzt. Der erhaltene Wert (24.2 kJ · mol^–1) ist in guter Übereinstimmung mit den in der Literatur veröffentlichten Ergebnissen.

---

, , , . , V/m, V- , «» — . V/m . – V/m. . — 7.90 ³ · ^–1 — , As₄ · Ha - , 24.2 . ^–1. .

     

Thermal stability of epoxy adhesives

A study was made of the thermal stability of epoxy compounds which were unfilled or contained metallic fillers such as aluminium dust, aluminium flakes, powdered bronze, powdered brass and silver flakes. The properties of the compounds were modified by the use of various hardeners.

---

Zusammenfassung Es wurde die thermische StabilitÄt ungefüllter und gefüllter Epoxidkompositionen untersucht. Als metallische Füllstoffe wurden Aluminiumpulver und -flocken, Messing- und Bronzpulver sowie Silberflocken eingesetzt. Die Eigenschaften dieser Kompositionen wurden mit verschiedenen HÄrtern modifiziert.

---

, , , . .

     

New Molybdenum(V) Complexes Prepared by the Oxidation of Dinuclear Quadruply-Bonded Molybdenum(II) Monothiocarboxylates

Oxidation of molybdenum(II) thiopivalate and thiobenzoate in the presence of -picoline or pyridine results in the formation of dinuclear molybdenum(V) complexes of the general formulae [Mo₂O₂(-O)₂(-SO₄)L₄] with L = -picoline or pyridine and [Mo₂O₂(-O)(-S)(-SO₄)L₄] with L = -picoline. As determined by X-ray structure analysis, two complexes with -picoline differ in their bridging cores: In one complex, two Mo atoms are doubly bridged through two oxygen atoms; in the other, one Mo atom is doubly bridged through oxygen and sulfur atoms. However, they both crystallize together. The product is solvated with -picoline and water molecules. Molybdenum atoms exhibit distorted octahedral coordinations. The same complexes were prepared also through direct reactions of [Mo₂O₃(O₂CCH₃)₄] with thiopivalic and thiobenzoic acid in the presence of -picoline or pyridine. The appearance of the oxo-oxygens and sulfido-sulfur as well as sulfato ligand is explained by the molybdenum-catalyzed oxidation of thiocarboxylates.     

Contribution of air oxygen to photooxidation of alkanes by vanadium(V) and chromium(VI) oxocomplexes

In photochemical oxygenation of cyclohexane by KVO₃–CF₃COOH or K₂Cr₂O₇–Bu₄NBr–H₂O–CH₂Cl₂ in air the source of oxygen atoms in the product cyclohexanol and cyclohexanone is air dioxygen rather than a metal oxo-complex. In the absence of dioxygen the products of alkane oxygenation are not formed in either of the above systems. At pH=3, Cr(VI) does oxidize cyclohexane to cyclohexanol even in argon atmosphere.

---

KVO₃–CF₃COOH K₂Cr₂O₇–Bu₄NBr–H₂O–CH₂Cl₂ , . . , pH=3, Cr(VI) .

     

Nickel(II) xanthates with nitrogen heterocycles as bridging ligands

New homopolynuclear nickel(II) xanthate complexes with nitrogen donor heterocycles as bridging ligands have been prepared, namely [Ni(Rxa)2(-L)]n and [Ni2(Rxa)4(-L1)], where R=i-Pr,i-Am; xa=OCS2– L=1,2-bis(4- pyridyl)ethane (bpe), 4,4-dithiodipyridyl (dtp), 1,2-bis(4- pyridyl)ethylene (dpe), 4,4-trimethylene-dipyridine (tmd); L1=2,3-bis(2-pyridyl)pyrazine (bpp), 2,4-bis(5,6- diphenyl-1,2,4-triazine-3-yl)pyridine (bdt), or 2,4,6-tris(2- pyridyl)-1,3,5-triazine (tpt). The compounds have been characterized by elemental analyses, i.r. and electronic spectroscopies, magnetochemical and conductivity measurements. The results show that the [Ni(Rxa)2(-L)]n complexes are linear polymers in which the nitrogen heterocycles bridge between the nickel(II) ions, which are coordinated by four sulfur and two nitrogen atoms and have trans-octahedral geometry. The nearly constant values of the effective magnetic moment (3.36–3.34 eff/B) over the 77–295 K temperature range indicate that exchange interactions are lacking among the paramagnetic centres in the linear structure, [Ni(i-Amxa)2(dpe)]n. The variable- temperature magnetic susceptibilities of the [Ni2(i-Prxa)4(bpp)] (3.00–2.95eff/B per Ni atom), [Ni2(i-Prxa)4(bdt)] (2.72–2.63 eff/B per Ni atom), and [Ni2(i-Amxa)4(tpt)] (2.76–1.87 eff/B per Ni atom) were measured down to liquid nitrogen temperature. In the case of binuclear nickel(II) complexes with bdt or tpt, antiferromagnetic coupling between the nickel(II) ions was detected, giving the exchange integral J=–4.0cm–1 and –29.6cm–1, respectively.     

Simulation of synergism phenomena in inhibition of styrene oxidation by organic phosphite and chromium(III) acetylacetonate

The rate constants for the reaction of styrene peroxy radicals with free and complexed phosphite molecules have been determined together with the rate constant for complex formation of Cr³⁺ with phosphite.

---

(Cr⁺³) .