Low-temperature heat capacities and thermodynamic properties of 2,2-dimethyl-1,3-propanediol

The molar heat capacities C _p,m of 2,2-dimethyl-1,3-propanediol were measured in the temperature range from 78 to 410 K by means of a small sample automated adiabatic calorimeter. A solid-solid and a solid-liquid phase transitions were found at T-314.304 and 402.402 K, respectively, from the experimental C _p-T curve. The molar enthalpies and entropies of these transitions were determined to be 14.78 kJ mol⁻¹, 47.01 J K⁻¹ mol⁻ for the solid-solid transition and 7.518 kJ mol⁻¹, 18.68 J K⁻¹ mol⁻¹ for the solid-liquid transition, respectively. The dependence of heat capacity on the temperature was fitted to the following polynomial equations with least square method. In the temperature range of 80 to 310 K, C _p,m/(J K⁻¹ mol⁻¹)=117.72+58.8022x+3.0964x ²+6.87363x ³−13.922x ⁴+9.8889x ⁵+16.195x ⁶; x=[(T/K)−195]/115. In the temperature range of 325 to 395 K, C _p,m/(J K⁻¹ mol⁻¹)=290.74+22.767x−0.6247x ²−0.8716x ³−4.0159x ⁴−0.2878x ⁵+1.7244x ⁶; x=[(T/K)−360]/35. The thermodynamic functions H _T−H _298.15 and S _T−S _298.15, were derived from the heat capacity data in the temperature range of 80 to 410 K with an interval of 5 K. The thermostability of the compound was further tested by DSC and TG measurements. The results were in agreement with those obtained by adiabatic calorimetry.     

Heat capacities and thermodynamic properties of chrysanthemic acid

The heat capacities of chrysanthemic acid in the temperature range from 80 to 400 K were measured with a precise automatic adiabatic calorimeter. The chrysanthemic acid sample was prepared with the purity of 0.9855 mole fraction. A solid-liquid fusion phase transition was observed in the experimental temperature range. The melting point, T _m, enthalpy and entropy of fusion, Δ_fus H _m, Δ_fus S _m, were determined to be 390.741±0.002 K, 14.51±0.13 kJ mol^-1, 37.13±0.34 J mol^-1 K^-1, respectively. The thermodynamic functions of chrysanthemic acid, H _(T)-H_(298.15), S _(T)-S_(298.15) and G _(T)-G ₍₂₉₈.₁₅₎ were reported with a temperature interval of 5 K. The TG analysis under the heating rate of 10 K min^-1 confirmed that the thermal decomposition of the sample starts at ca. 410 K and terminates at ca. 471 K. The maximum decomposition rate was obtained at 466 K. The purity of the sample was determined by a fractional melting method. This revised version was published online in July 2006 with corrections to the Cover Date.     

Low-temperature heat capacities and standard molar enthalpy of formation of aspirin

Molar heat capacities (C _p,m) of aspirin were precisely measured with a small sample precision automated adiabatic calorimeter over the temperature range from 78 to 383 K. No phase transition was observed in this temperature region. The polynomial function of C _p,m vs. T was established in the light of the low-temperature heat capacity measurements and least square fitting method. The corresponding function is as follows: for 78 K≤T≤383 K, C _p,m/J mol^-1 K^-1=19.086X ⁴+15.951X ³-5.2548X ²+90.192X+176.65, [X=(T-230.50/152.5)]. The thermodynamic functions on the base of the reference temperature of 298.15 K, {ΔH _T -ΔH _298.15} and {S _T-S _298.15}, were derived. Combustion energy of aspirin (Δ_c U _m) was determined by static bomb combustion calorimeter. Enthalpy of combustion (Δ_c H ^o _m) and enthalpy of formation (Δ_f H ^o _m) were derived through Δ_c U _m as - (3945.26±2.63) kJ mol^-1 and - (736.41±1.30) kJ mol^-1, respectively. This revised version was published online in July 2006 with corrections to the Cover Date.     

Heat capacities and thermodynamic properties of 2-benzoylpyridine (C12H9NO)

The heat capacities of 2-benzoylpyridine were measured with an automated adiabatic calorimeter over the temperature range from 80 to 340 K. The melting point, molar enthalpy, Δ_fusH^m, and entropy, Δ_fusS^m, of fusion of this compound were determined to be 316.49±0.04 K, 20.91±0.03 kJ mol^–1 and 66.07±0.05 J mol^–1 K^–1, respectively. The purity of the compound was calculated to be 99.60 mol% by using the fractional melting technique. The thermodynamic functions (H_T–H_298.15) and (S_T–S_298.15) were calculated based on the heat capacity measurements in the temperature range of 80–340 K with an interval of 5 K. The thermal properties of the compound were further investigated by differential scanning calorimetry (DSC). From the DSC curve, the temperature corresponding to the maximum evaporation rate, the molar enthalpy and entropy of evaporation were determined to be 556.3±0.1 K, 51.3±0.2 kJ mol^–1 and 92.2±0.4 J K^–1 mol^–1, respectively, under the experimental conditions.     

甲氰菊酯的热容及热力学性质的研究

采用精密自动绝热量热测量了自已合成并提纯到0.9916(摩尔分数)的甲氰菊酯在80~400K温区的热容.在此温区发现一固液熔化相变.其熔化温度、摩尔熔化焓、摩尔熔化熵分别为:(322.476^+~-0.012)K,(18.57^+~-0.29)kj.mol^-^1,(57.59^+~-1.01)J.K^-^1.mol^-^1.报道了该物质每隔5K的热力学函数值,用热重法研究了该化合物的热分解,对试样的化学纯度进行了量热研究。     

2-噻吩乙酸的低温热容和热力学性质

用精密自动绝热量热计测定了2-噻吩乙酸在78～343 K温区内的摩尔热容. 实验结果表明, 在78～314和337～343 K温区内, 该化合物无相变及其他热异常现象发生, 将实验数据拟合得到了该化合物热容随温度变化的多项式方程; 在314～337 K温区内, 该物质发生固-液熔化相变, 其熔化温度、熔化焓、熔化熵及样品纯度分别确定为: 335.745 K, 16.260 kJ•mol^－1, 48.415 J•K^－1•mol^－1和98.555%. 根据热力学函数关系式, 由热容数据计算出了2-噻吩乙酸在80～340 K温区内相对于标准参考温度298.15 K的热力学函数值.     

2-碘-3-硝基甲苯的低温热容和热力学性质

通过精密自动绝热热量计测定了2-碘-3-硝基甲苯(C~7H~6INO~2)在79～373K温区的摩尔热容。实验结果表明,这个化合物在331～340K温度区间有一个固-液熔化相变,其熔化温度、摩尔熔化焓、摩尔熔化熵以及该样品的化学纯度分别为：(339.311±0.13)J·mol^-^1·K^-^1和99.73%。用热容多项式议程进行数值积分获得了该物质在298.15～370K温区每隔5K的热力学函数值。用DSC分析对它的固-液相变过程作了进一步的研究。     

Low-temperature heat capacity of diglycylglycine

Heat capacity of tripeptide diglycylglycine was measured in a temperature range from 6.5 to 304 K. The results were compared with those for glycine and glycylglycine. Peptide bonding was found not to change C _P(T) virtually above 70 K, where heat capacity does not obey the Debye model. Comparison with literature data allows one to expect a significant difference in the heat capacity for enantiomorph and racemic species of valine and leucine, like it was found recently for D-and DL-serine.     

Low-temperature heat capacity of α and γ polymorphs of glycine

Low-temperature heat capacity of two polymorphs of glycine (α and γ) was measured from 5.5 to 304 K and thermodynamic functions were calculated. Difference in heat capacity between polymorphs ranges from +26% at 10 K to -3% at 300 K. The difference indicates the contribution into the heat capacity of piezoelectric γ polymorph, probably connected with phase transition and ferroelectricity. Thermodynamic evaluations show that at ambient conditions γ polymorph is stable and α polymorph is metastable. This revised version was published online in August 2006 with corrections to the Cover Date.     

Calorimetric investigation of thermodynamic properties and ions rotation of some perbromates

Low temperature heat capacity of ammonium, rubidium and cesium perbromates has been studied by method of adiabatic calorimetry. Anomaly of the heat capacity of cesium perbromate has been found, which corresponds to a structural phase transition. The separation of heat capacity into components has been carried out by the additive scheme. The torsion oscillation of BrO ₄ ^– anions in solid perbromates at low temperatures has been found. Ammonium ions retardedly rotate aroundC ₂ axes in the crystal lattice of NH₄BrO₄.

---

Zusammenfassung Mittels adiabatischer Kalorimetrie wurde die Tieftemperatur-Wärmekapazität von Ammonium-, Rubidium- und Zäsiumperbromat untersucht. Man fand eine Anomalie für die Wärmekapazität von Zäsiumperbromat, in deren Hintergrund eine Phasenumwandlung steht. Anhand eines Additivschema wurde die Wärmekapazität in Komponenten gespalten. In festen Perbromaten fand bei man bei tiefen Temperaturen eine Torsionsschwingung der BrO ₄ ^– -Anionen. Die Ammoniumionen zeigen eine verlangsamte Rotation um die C₂-Achsen im Kristallgitter von NH₄BrO₄.

     

Molar excess heat capacities and volumes for mixtures of benzonitrile with cyclohexane between 10 and 45°C

The heat capacities and volumes for binary mixtures of benzonitrile with cyclohexane were determined at 10, 25, and 45°C. The dependence of the molar excess heat capacities on temperature and composition are interpreted in terms of the thermal relaxation of associated benzonitrile molecules into monomeric species.To whom correspondence should be addressed.     

Low-Temperature Heat Capacities and Thermodynamic Properties of Octahydrated Barium Dihydroxide,Ba（OH）2·8H2O（s）

Low-temperature heat capacities of octahydrated barium dihydroxide, Ba（OH）2·8H2O（s）, were measured by a precision automated adiabatic calorimeter in the temperature range from T=78 to 370 K. An obvious endothermic process took place in the temperature range of 345-356 K. The peak in the heat capacity curve was correspondent to the sum of both the fusion and the first thermal decomposition or dehydration. The experimental molar heat capacifies in the temperature ranges of 78-345 K and 356-369 K were fitted to two polynomials. The peak temperature, molar enthalpy and entropy of the phase change have been determined to be （355.007±0.076） K, （73.506±0.011） kJ·ol^-1 and （207.140±0.074） J·K^-1·mol^-1, respectively, by three series of repeated heat capacity measurements in the temperature region of 298-370 K. The thermodynamic functions, （Hr-H298.15 k ）and （Sr-S298.15k）, of the compound have been calculated by the numerical integral of the two heat-eapacity polynomials. In addition, DSC and TG-DTG techniques were used for the further study of thermal behavior of the compound. The latent heat of the phase change became into a value larger than that of the normal compound because the melfing process of the compound must be accompanied by the thermal decomposition or dehydration of 71-120.     

苯氧威 (C17H19NO4) 的热容和热力学性质

通过小样品精密自动绝热量热计测定了自己合成并提纯的苯氧威 (C₁₇H₁₉NO₄) 在79 ～ 360 K温区的低温摩尔热容。量热实验发现, 该化合物在320 ~ 330 K温区, 有一固 - 液熔化相变过程, 其熔化温度为（326.31±0.14）K, 摩尔熔化焓、摩尔熔化熵及化合物的纯度分别为：(26.98±0.04) kJ• mol^-1和（82.69 0.09）J•mol^-1•K^-1和 (99.53±0.01 )%。并计算出了80-360 K的热力学参数。用分步熔化法得到绝对纯化和物的熔点为326.60±0.06 K。用差示扫描量热 (DSC) 技术对该物质的固-液熔化过程作了进一步研究，结果与绝热量热法一致。     

Heat Capacities and Thermodynamic Properties of Fenpropathrin (C22H23O3N)

The heat capacities of fenpropathrin in the temperature range from 80 to 400 K were measured with a precise automatic adiabatic calorimeter. The fenpropathrin sample was prepared with the purity of 0.9916 mole fraction. A solid—liquid fusion phase transition was observed in the experimental temperature range. The melting point, T_m, enthalpy and entropy of fusion, _fusH_m, _fusS_m, were determined to be 322.48±0.01 K, 18.57±0.29 kJ mol^–1 and 57.59±1.01 J mol^–1 K^–1, respectively. The thermodynamic functions of fenpropathrin, H_(T)—H_(298.15), S_(T)—S_(298.15) and G_(T)—G_(298.15), were reported with a temperature interval of 5 K. The TG analysis under the heating rate of 10 K min^–1 confirmed that the thermal decomposition of the sample starts at ca. 450 K and terminates at ca. 575 K. The maximum decomposition rate was obtained at 558 K. The purity of the sample was determined by a fractional melting method.This revised version was published online in November 2005 with corrections to the Cover Date.     

Low-temperature heat capacities and thermodynamic properties of crystalline isoproturon

An incremental integral isoconversional method for the determination of activation energy as a function of the extent of conversion is presented. The method is based on the treatment of experimental data without their transformation so that the resulting values of activation parameters should not be biased. The method was tested for recovering the activation energies from simulated data and employed for the treatment of experimental data of the NiS recrystallisation. This revised version was published online in July 2006 with corrections to the Cover Date.     

Molar heat capacity and thermodynamic properties of 1,2-cyclohexane dicarboxylic anhydride [C8H10O3]

The molar heat capacity C _p,m of 1,2-cyclohexane dicarboxylic anhydride was measured in the temperature range from T=80 to 390 K with a small sample automated adiabatic calorimeter. The melting point T _m, the molar enthalpy Δ_fus H _m and the entropy Δ_fus S _m of fusion for the compound were determined to be 303.80 K, 14.71 kJ mol⁻¹ and 48.43 J K⁻¹ mol⁻¹, respectively. The thermodynamic functions [H _T-H _273.15] and [S _T-S _273.15] were derived in the temperature range from T=80 to 385 K with temperature interval of 5 K. The thermal stability of the compound was investigated by differential scanning calorimeter (DSC) and thermogravimetry (TG), when the process of the mass-loss was due to the evaporation, instead of its thermal decomposition.     

乙醇和甲苯组成的最低共沸混合物热力学性质的研究

The molar heat capacity of the azeotropic mixture composed of ethanol and toluene was measured by a high precision adiabatic calorimeter from 80 to 320 K. The glass transition and phase transitions of the azeotropic mixture were determined based on the heat capacity measurements. A glass transition at 103.350 K was found. A solid-solid phase transition at 127.282 K, two solid-liquid phase transitions at 153.612 and 160.584 K were observed, which correspond to the transition of metastable crystal to stable crystal of ethanol and the melting of ethanol and toluene, respectively. The thermodynamic functions and the excess ones of the mixture relative to the standard temperature 298.15 K were derived based on the relationships of the thermodynamic functions and the function of the measured heat capacity with respect to temperature.     

Molar excess heat capacities and volumes for mixtures of alkanoates with cyclohexane at 25°C

Molar excess volumes V ^E at 25°C have been determined by vibrating-tube densimetry, as a function of mole fraction x for different series of an alkanoate (H _2m+1 C _m COOC _n H _2n+1 )+cyclohexane. Three types of alkanoates were investigated, i.e., methanoates (m=0, with n=3 and 4), ethanoates (m=1, with n=2, 3, and 4) and propanoates (m=2, with n=1, 2, and 3). In addition, a Picker flow calorimeter was used to obtain molar excess heat capacities C _p ^E at constant pressure at the same temperature. V ^E is positive for all systems and rather symmetric, with V ^E (x=0.5) amounting to almost identical values in a series of mixtures containing an alkanoate isomer of same formula (say C₄H₈O₂, C₅H₁₀O₂, or C₆H₁₂O₂). The composition dependence of C _p ^E is rather unusual in that two more or less marked minima are observed for most of the mixtures, especially when the alkanoate is a methanoate or an ethanoate. These results are discussed in terms of possible changes in conformation of both the ester and cyclohexane.     

Synthesis,characterization and thermodynamic data of compounds with NZP structure

Data on synthesis, thermal behavior and thermodynamic properties for the NZP phosphates NaMe₂(PO₄)₃ and Na₅Me(PO₄)₃ (Me=Ti, Zr, Hf) are reported. The compounds were synthesized by sol-gel method and solid-state reactions and characterized by X-ray powder diffraction, IR spectroscopy, electron microprobe and chemical analysis. Their thermal behavior was studied by the DTA measurements. The heat capacities of the phosphates were measured between temperatures 7 and 650 K. The fractal dimensions for the phosphates were calculated. The obtained thermodynamic characteristics of these phosphates and also literature data for the compounds of NZP type structure are summarized.     

An adiabatic low-temperature calorimeter for heat capacity measurement of small samples

A small sample adiabatic calorimeter for measuring heat capacities in the temperature range 60–350 K using the Nernst method has been constructed. The sample cell of the calorimeter is 6 cm³ in the internal volume, equipped with a miniature platinum thermometer and surrounded by two adiabatic shields. Two sets of 6-junction chromel-copel thermocouples were mounted between the cell and the shields to indicate the temperature differences between them. The adiabatic conditions of the cell were automatically controlled by two sets of temperature controller. A mechanical pump was used to pump out the vapour of liquid nitrogen in the cryostat to solidify N₂ (1), and 60 K or even lower temperature was obtained. The performance of this apparatus was evaluated by heat capacity measurements on α-alumina. The deviations of experimental results from a smoothed curve lie within ±0.2%, while the inaccuracy is within ±0.5% compared with the recommended reference data in the wole temperature range.