Neutral pi-associated porphyrin [2]catenanes

A series of neutral porphyrin-containing catenanes has been synthesised, consisting of a zinc porphyrin strapped by a polyethylene glycol chain containing four or six ethylenoxy-units and incorporating a central naphthoquinol unit, interlinked with a naphthalene diimide macrocycle. The napthalene diimide precursor units exhibit only weak binding with the strapped porphyrins (Ka between 8 and 0.02 M(-1)), but good yields of the catenanes were obtained by Glaser coupling of the alkynyl napthalene diimide precursors in the presence of the porphyrins. Structures and solution conformations were determined by mass spectral and detailed 1H NMR studies. For the longer strapped porphyrins, the diimide macrocycle rotates around the central naphthoquinol unit at 420-450 times per second, while rotation is virtually prevented in the tighter strapped derivatives. A second dynamic process occurring in both sets of catenanes and described as 'yawing' leads to inequivalence in the naphthalene moieties. UV-Visible spectra indicate charge transfer interactions and electronic communication between the two components of the catenane.     

Rational synthesis of multicyclic bis[2]catenanes

Bis-loop tetraurea calix[4]arene 6 has been prepared by acylation of the wide-rim calix[4]arene tetraamine 1 with the activated bis(urethane) 8 under dilution conditions. Similarly the bis(Boc-protected) tetraamine 2 is converted into the mono-loop derivative 3 which after deprotection and acylation gives the bisalkenyl derivative 5. In apolar solvents this tetraurea calix[4]arene 5 forms regioselectively a single hydrogen-bonded homodimer, from which the bis[2]catenane 10a is formed in 49% by a metathesis reaction followed by hydrogenation. Bis-loop derivative 6 forms no homodimers for steric reasons, but a stoichiometric mixture with the open-chain tetraalkenyl derivative 7a contains exclusively the heterodimer. Metathesis and subsequent hydrogenation now yields 65 % of the pure bis[2]catenane 10a which could not be isolated from the complex reaction mixture obtained from the homodimer 7a.7a. The chirality of 10a (D(2) symmetry) has been verified by optical resolution using HPLC on a chiral stationary phase.     

Polypseudorotaxanes via ring-opening metathesis polymerizations of [2]catenanes

A bis-phenanthroline [2]catenane copper complex, consisting of one olefinic macrocycle and one nonolefinic macrocycle, underwent an entropy-driven ring-opening olefin metathesis polymerization (ROMP) to provide a polypseudorotaxane. The polymerization featured an average degree of polymerization of ca. 63 wherein the polymer was effectively saturated with threaded macrocycles. Removal of the copper led to near complete release of the macrocycles from the polymer backbone.     

Path selection for conformational interconversions in [2]catenanes

[strucure: see text]The conformational interconversions of several [2]catenanes containing a dibenzo-34-crown-10 ether (BPP34C10) interlocked with rings containing two 4,4'-dipyridyls tethered by different aryl spacers have been studied. Blocking groups on the tethers enabled the two pathways for circumrotation of the BPP34C10 to be open or blocked. The activation barrier for migration along the open tethers varied from 11 to 13 kcal/mol. This study demonstrates an ability to select the pathway for conformational interconversions in [2]catenanes.     

Synthesis of [2]catenanes by template-directed clipping approach

A series of [2]catenanes were efficiently synthesized in high yields by a template-directed clipping approach with the formation of one macrocycle around another macrocycle containing a dialkylammonium recognition site. Their structures were identified by the NMR spectra and ESI mass spectrometry, and their geometries were investigated by the theoretical calculation.     

Calix[4]arene-based bis[2]catenanes: synthesis and chiral resolution

The exclusive formation of hydrogen-bonded dimers between tetraaryl and tetratosylurea calix[4]arenes has been used to prepare a series of ten "bisloop" tetraurea calix[4]arenes 3, in which adjacent phenylurea groups are covalently linked through alpha,omega-dioxyalkane chains. This dimerization with tetratosylurea 2 as template preorganizes the alkenyl residues of tetra(m-alkenyloxyphenyl) ureas 1 and enables their selective connection in high yield (up to 95 %) by olefin metathesis followed by hydrogenation. The "bisloop" calixarenes 3 also exclusively form heterodimers with 1. Thus, in a separated metathesis/hydrogenation sequence, a series of 14 cyclic bis[2]catenanes 4, in which two calix[4]arenes are connected through their wide rims by two pairs of interlocked rings (total size 29 to 41 atoms), were prepared in yields of up to 97 %. Optical resolution of these chiral bis[2]catenanes was studied by HPLC on chiral stationary phases. The single-crystal X-ray structure of one example (4(P,10)) confirmed the interlocking rings and revealed that the hydrogen-bonded dimeric capsule of the calix[4]arene can be "completely" opened.     

A new synthetic route to chloride selective [2]catenanes

A novel anion templation route has been developed to synthesise two new catenanes, which are observed to selectively complex chloride in protic solvent media.     

Syntheses and dynamics of donor-acceptor [2]catenanes in water

A subset of mechanically interlocked molecules, namely, donor-acceptor [2]catenanes, have been produced in aqueous solutions in good yields from readily available precursors. The catenations are templated by strong hydrophobic and [π···π] stacking interactions, which serve to assemble the corresponding supramolecular precursors, prior to postassembly covalent modification. Dynamic (1)H NMR spectroscopic investigations performed on one of these [2]catenanes reveal that the pirouetting motion of the butadiyne-triethylene glycol chain occurs with a dramatically lower activation enthalpy, yet with a much higher negative activation entropy in water, compared to organic solvents. The preparations of mechanically interlocked molecules in water constitute the basis for the future development of complex functional molecular machinery in aqueous environments.     

Translational isomerizations in [2]catenanes with unsymmetrically substituted resorcinol-based tethers

The translational isomerizations of nine [2]catenanes (2-10) containing an electron-rich dibenzo-34-crown-10 ether (BPP34C10) interlocked with rings containing an unsymmetric 4-substituted (chloro, ethyl, or hexyl) resorcinol-based tether linking two electron-deficient dipyridyl groups have been studied by variable temperature (VT) 1H NMR spectroscopy. The second symmetric tether between the dipyridyl groups was a large 5-(4-tert-butylphenyl)-1,3-xylyl (catenanes 2-4), a narrower 1,3-xylyl (catenanes 5-7), or a narrow 1,4-xylyl (catenanes 8-10) group. The presence of the unsymmetrically placed substituent on the resorcinol tether substantially affected the binding energy of the BPP34C10 ring when pi-stacked over either of the dipyridyl groups; the equilibrium constant between the bistable states was found to range from 1.5 to 3.5. The origin of these energy differences is postulated to stem from an unsymmetric twisting of the resorcinol tether to minimize interaction between the 4-substituent and the ethoxy group at the 3-position. The activation barriers for passage over the 4-substituted resorcinol-based tether were 12.5, 13, and 15 kcal/mol for the chloro, ethyl, and hexyl substituents, respectively.     

Gold(I) macrocycles and topologically chiral [2]catenanes

The design and synthesis of a new type of topologically chiral [2]catenane is reported. The compounds are formed easily by self-assembly on reaction of the oligomeric digold(I) diacetylide precursor complex [[4-BrC(6)H(4)CH(4-C(6)H(4)OCH(2)CCAu)(2)](n)] with diphosphine ligands. Reactions with the diphosphines PP = bis(diphenylphosphinophoshino)acetylene, trans-1,2-bis(diphenylphosphino)ethylene, bis(diphenylphosphino)ethane, and 1,1'-bis(diphenylphosphino)ferrocene yield simple ring complexes [4-BrC(6)H(4)CH(4-C(6)H(4)OCH(2)CCAu)(2)(mu-PP)] as the only products, since the spacer groups in the diphosphines are not long enough or are too bulky to allow catenane formation. Reaction with PP = bis(diphenylphosphino)propane or bis(diphenylphosphino)butane gave [2]catenane complexes [[4-BrC(6)H(4)CH(4-C(6)H(4)OCH(2)CCAu)(2)(mu-PP)](2)], whose structures are confirmed crystallographically. The macrocyclic ring compounds have C(s) symmetry but, as a result of the presence of the unsymmetrical "hinge group" 4-BrC(6)H(4)CH, the [2]catenanes have C(2) symmetry and so are topologically chiral. In favorable cases, the formation of the [2]catenane can be proved by NMR spectroscopy since catenane formation leads to nonequivalence of most ring atoms. The formation of the [2]catenanes was successfully predicted based on the conformation of the precursor bis(phenol), and it is argued that the methods used should be more generally applicable to the synthesis of functionally substituted supermolecules of interest for application in molecular devices.     

Squaraine [2]catenanes: synthesis, structure and molecular dynamics

Three squaraine [2]catenanes are synthesized and found to have bright, deep-red fluorescence and high chemical stability. The interlocked molecules undergo two large-amplitude dynamic processes, twisting of the squaraine macrocycle and skipping over the partner tetralactam.     

Iodide-catalysed self-assembly of donor-acceptor [3]catenanes

Charged donor-acceptor [3]catenanes comprising the pi-accepting cyclobis(paraquat-4,4'-biphenylene) and pi-donating aromatic crown ether macrocycles have been prepared in high yields using thermodynamically controlled dynamic nucleophilic substitution.     

Templated synthesis of desymmetrized [2]catenanes with excellent translational selectivity

Desymmetrized [2]catenanes were synthesized and shown to exhibit excellent translational selectivity. The templated synthesis takes effect from the formation of pseudorotaxanes between pi-rich crown ethers and a pi-deficient pyromellitic (PmI) unit, followed by macrocyclization around the crown ethers with the creation of a bipyridinium (BPy) unit. The crown ethers preferably encircle the BPy unit in the resulting [2]catenanes in both solution and the solid state, as indicated by various spectroscopic analyses.     

New hybrid [2]catenanes based on a 4,4'-bipyridinium ligand

The self-assembly-mediated synthesis of metallomacrocycles 4a and 4b from (en)M(NO3)2 (M = Pd, Pt) and bipyridinium ligand 3 is described. The reaction is templated by disodium p-phenyldiacetic dicarboxylate, which is inserted into the macrocyclic cavity. Similarly, the self-assembly process between ligand 3, (en)M(NO3)2 (M = Pd, Pt), and the macrocyclic polyether 6 resulted in the formation of hybrid catenanes 7a and 7b. In the [2]catenanes, the circumrotation of the macrocyclic polyether through the cavity of the metallocycle is slow on the 1H NMR time scale.     

Synthesis and self-assembly of novel calix[4]arenocrowns: formation of calix[4]areno[2]catenanes

A series of novel calix[4]arenocrowns 1a-c were efficiently synthesized by a one-pot reaction of calix[4]monohydroquinone diacetate 5 with ditosylate 6 and its analogues in the presence of sodium hydroxide. It was found that the calix[4]arenocrowns could form stable pseudorotaxane-type complexes 2a-c with paraquat, and further self-assemble into calix[4]areno[2]catenanes 3a-c with dicationic salt 8 and p-bis(bromomethyl)benzene.     

Synthesis of a novel poly[2]-catenane containing rigid catenanes

A novel poly[2]-catenane containing rigid catenane subunits connected by semirigid spacers has been synthesized. This new macromolecular architecture is the second example of a polymer containing topological bonds in the main chain. The poly[2]-catenane structure was proved by spectroscopic methods, especially ¹H NMR, IR and MALDITOF. The polymer is thermally stable up to 380°C and shows a high glass transition temperature of ca. 265°C.     

Palladium(II)-directed self-assembly of dynamic donor-acceptor [2]catenanes

Highly efficient syntheses of donor-acceptor [2]catenanes were developed using a combination of templation and reversible metal-ligand coordination. The desired [2]catenanes were obtained within minutes through a five-component assembly, involving a donor-containing crown ether, an acceptor-containing ligand, two Pd(II) metal centers, and a dipyridyl ligand. The [2]catenane formation was characterized by 1H NMR and UV-vis spectroscopies and cold-spray ionization mass spectrometry. In particular, great translational selectivity was observed when a crown ether with two different donor units was employed.     

Anion-templated calix[4]arene-based pseudorotaxanes and catenanes

We present the rational design and anion-binding properties of the first anion-templated pseudorotaxanes and catenanes in which the "wheel" component is provided by a calix[4]arene macrobicyclic unit. The designs and syntheses of two new calix[4]arene macrobicycles, 2 and 3, are presented, and the abilities of these new species both to bind anions and to undergo anion-dependent pseudorotaxane formation are demonstrated. Furthermore, it is shown that performing ring-closing metathesis reactions on some of these pseudorotaxane assemblies gives novel catenane species 14 and 15, in which the yield of interlocked molecule obtained is critically dependent on the presence of a suitable anion template, namely, chloride. Exchange of the chloride anion in catenane 14 a for hexafluorophosphate gives catenane 14 d, which contains a unique anion-binding domain defined by the permanently interlocked hydrogen-bond-donating calix[4]arene macrobicycle and pyridinium macrocycle fragments. The anion-binding properties of this domain are presented, and shown to differ from non-interlocked components.