A highly fluorous room-temperature ionic liquid exhibiting fluorous biphasic behavior and its use in catalyst recycling

[formula: see text] A novel fluorous room-temperature ionic liquid, 1-butyl-3-methyl-imidazolium tetrakis[p-[dimethyl(1H, 1H, 2H, 2H-perfluorooctyl)silyl]phenyl]-borate (1), was used as a solvent for the homogeneous hydrosilylation of 1-octene catalyzed by a fluorous version of Wilkinson's catalyst. The catalyst was recycled by biphasic separation with an average retention of catalyst activity of 94%. As opposed to other ionic liquids, 1 exhibits high miscibility with apolar compounds such as alkenes and resembles fluorous solvents in its phase behavior with organic solvents.     

Amide bond formation with a new fluorous carbodiimide: separation by reverse fluorous solid-phase extraction

A new fluorous carbodiimide is introduced along with a convenient procedure for amide coupling reactions. Reactions of acids and amines under standard conditions for carbodiimide couplings, followed by simple reverse fluorous solid-phase extraction (FSPE) over standard silica gel, provide the target amide products in good yields and purities. The use of HFE-7100 as a fluorous solvent is crucial for the success of the reverse FSPE.     

Poly(ethylene glycol)-lipase complexes catalytically active in fluorous solvents

Lipase-catalyzed alcoholysis between vinyl cinnamate and benzyl alcohol in fluorous solvents was investigated. This is the first report of a lipase-catalyzed reaction in a fluorous solvent. Forming the poly(ethylene glycol)(PEG)-lipase PL complex enhanced lipase activity over 16-fold over that of native lipase powder. The PEG-lipase PL complex exhibited markedly higher alcoholysis activities in fluorous solvents than in conventional organic solvents such as isooctane and n-hexane. The optimum reaction temperature for FC-77 (perfluorooctane) was 55 [degree]C and the optimum pH for the preparation of the PEG-lipase complex was 9.0; similar to the conditions for lipase PL-catalyzed reaction in aqueous solution. The alcoholysis reaction in fluorous solvent requires the addition of a FC77-miscible organic solvent (isooctane) in order to dissolve non-fluorinated substrates. Lipase activity in the fluorous solvent was significantly influenced by the volume ratio of isooctane in the reaction medium. Vinyl cinnamate inhibition of the lipase-catalyzed reaction occurred at a much lower concentration in the fluorous solvent than in isooctane. These results can be explained by the localization of substrates around lipase molecules, induced by adsorption of the substrates to the PEG layer of the PEG-lipase complex.     

An alternative and facile purification procedure of amidation and esterification reactions using a medium fluorous Mukaiyama reagent

A convenient methodology for the separation of a fluorous by-product using fluorous chemistry is described. A Mukaiyama coupling reagent bearing a medium fluorous tag, between 40% and 60% fluorine by weight, can be effectively separated from non-fluorous components by increasing the water content of the crude reaction mixture and subsequent filtration. Additional fluorous solid phase extraction is not necessary.     

Extraction of perfluorinated compounds from food matrices using fluorous solvent partitioning

Perfluorinated compounds (PFCs) such as perfluorooctane sulfonic acid (PFOS) have emerged as a new class of global environmental pollutant; they bioaccumulate and are persistent in the environment and in wildlife. Fluorine-fluorine interactions have been investigated as a means to isolate PFCs for mass spectrometric quantification. A novel sample extraction and cleanup procedure has been developed for fat-containing samples based on fluorous liquid-liquid extraction (F-LLE) in a triphasic solvent system consisting of hybrid:fluorous:organic solvent (trifluoroethanol:perfluorohexane/dichloromethane-saturated with water). This system partially separates fluorous from non-fluorous compounds, allowing removal of co-extractants, which had previously resulted in liquid chromatography mass spectrometry (LC-MS/MS) peak suppression preventing low-level detection of PFCs. The developed F-LLE was coupled with an existing extraction protocol allowing the limits of detection of PFCs to be lowered an order of magnitude for high fat samples. The developed workflow was used to show the absence of a range of eleven PFCs in nine UK and one Irish cheese samples. This representative application demonstrates a new application of fluorous-organic extraction in sample cleanup for measurement of fluorinated analytes in food, environment and broader analytical chemistry.     

New fluorous/organic biphasic systems achieved by solvent tuning

Miscibility tests between 60 pairs of fluorous and organic solvents have been performed, and a number of biphasic systems based on hydrofluoroether solvents have been identified. Mutual solubilities of a series of fluorous and organic solvents have been measured to ascertain the compositions of the biphasic systems. A qualitative solvent tuning strategy based on solvent polarity and fluorophilicity/phobicity is introduced. Solvent tuning is then used to modulate the partition coefficients (P) of triarylphosphines with 0-3 fluorous tags. The results lay a foundation for future applications of these and related biphasic systems in catalysis and extraction.     

Synthesis, reaction, and recycle of fluorous palladium catalysts for an asymmetric allylic alkylation without using fluorous solvents

[Chemical reaction: See text] Chiral fluorous aminophosphine 4c bearing two fluorous ponytails was prepared from (S)-prolinol and applied to palladium-catalyzed asymmetric allylic alkylation of 1,3-diphenyl-2-propenyl acetate (7) with a dialkyl malonate-BSA-LiOAc system with high enantioselectivities (up to 97% ee). Results indicated that the chiral fluorous palladium catalyst from ligand 4c was easily separated from the reaction mixture by simple solid/liquid separation and could be reused up to five times.     

CBS reductions with a fluorous prolinol immobilized in a hydrofluoroether solvent

A fluorous prolinol precatalyst bearing only 34 fluorine atoms has been immobilized in the hydrofluoroether solvent HFE-7500. The CBS reduction of acetophenone proceeded rapidly, in high yield and in high ee in the absence of any organic solvent. The organic product was stripped from the HFE-7500 phase with a polar solvent, and the HFE-7500 phase was reused "as is" with satisfactory results through eight runs. This process is an attractive prototype for the large-scale use, recovery, and reuse of fluorous organocatalysts.     

An effective and catalytic oxidation using recyclable fluorous IBX

Oxidation of alcohols in the presence of a catalytic amount of fluorous IBX and Oxone as a co-oxidant resulted in the corresponding carbonyl compounds in good to high yields. The fluorous IBX is readily recovered as insoluble fluorous IBA from the reaction mixture by simple filtration, and can be reused without significant loss of the catalytic activity.     

Dress-up chiral columns for the enantioseparation of amino acids based on fluorous separation

In this paper, we report a new type of chiral high-performance liquid chromatography (HPLC) column—a so-called dress-up chiral column—featuring a chiral stationary phase adsorbed reversibly in a commercial fluorous HPLC column through fluorous interactions. We synthesized perfluroalkylated proline derivatives as chiral stationary phase compounds and then adsorbed them reversibly in the fluorous HPLC column through the pumping of their solutions. By using this dress-up chiral column and fluorophobic elution of an aqueous copper(II) sulfate/MeOH mixture, we could enantioseparate seven racemic amino acids within 40 min. When we washed the dress-up chiral column with fluorophilic tetrahydrofuran or MeOH, the adsorbed chiral stationary phase compounds desorbed from the column, completely destroying its enantioseparation ability. The relative standard deviation of the retention times, the number of theoretical plates, and the resolution for each of four preparations of the dress-up columns were all less than or equal to 9.53 % in 20-times repeated analysis, and were all less than or equal to 18.7 % in four different preparations, respectively.     

Polyfluorinated quaternary ammonium salts of polyoxometalate anions: fluorous biphasic oxidation catalysis with and without fluorous solvents

[reaction: see text] Polyfluorinated quaternary ammonium cations, [CF(3)(CF(2))(7)(CH(2))(3)](3)CH(3)N(+) (R(F)N(+)), were synthesized and used as countercations for the [WZnM(2)(H(2)O)(2)(ZnW(9)O(34))(2)](12)(-) (M = Mn(II), Zn(II)) polyoxometalate. The (R(F)N(+))(12)[WZnM(2)(H(2)O)(2)(ZnW(9)O(34))(2)] compounds were fluorous biphasic catalysts for alcohol and alkenol oxidation, and alkene epoxidation with aqueous hydrogen peroxide. Reaction protocols with or without a fluorous solvent were tested. The catalytic activity and selectivity was affected by both the hydrophobicity of the solvent and the substrate.     

Stereoselective conjugate radical additions: application of a fluorous oxazolidinone chiral auxiliary for efficient tin removal

[reaction: see text] A series of asymmetric free-radical-mediated intermolecular conjugate additions using a fluorous oxazolidinone chiral auxiliary has been completed. The fluorous auxiliary facilitated product isolation using fluorous solid phase extractions (FSPE), effectively removing excess organic and organometallic reagents. Parallel reactions carried out with a similar but nonfluorous norephedrine-derived oxazolidinone demonstrated the superior stereoselectivity and purification obtainable with the fluorous chiral auxiliary.     

Synthesis of a fluorous ligand and its application for asymmetric addition of dimethylzinc to aldehydes

A new fluorous ligand was synthesized from the acetonide of dimethyl tartarate, which showed excellent asymmetric induction on the addition of dimethylzinc to aldehydes. This ligand will be useful for synthesis of bioactive compounds with a methyl carbinol moiety. It could be recycled without using a fluorous solvent or a fluorous column.     

Solution-phase preparation of a 560-compound library of individual pure mappicine analogues by fluorous mixture synthesis

Solution-phase mixture synthesis has efficiency advantages and favorable reaction kinetics. Applications of this technique, however, have been discouraged by the difficulty in obtaining individual, pure final products by using conventional separation and identification processes. Introduced here is a new strategy for mixture synthesis that addresses the separation and identification problems. Members of a series of organic substrates are paired with a series of fluorous tags of different chain lengths. The tagged starting materials are then mixed and taken through a multistep reaction process. Fluorous chromatography is used to demix the tagged product mixtures on the basis of the fluorine content of the tags to provide the individual pure components of the mixture, which are detagged to release the final products. The utility of fluorous mixture synthesis is demonstrated by the preparation of a 560-membered library of analogues of the natural product mappicine. A seven-component mixture is carried through a four-step mixture synthesis (two one-pot and two parallel steps) to incorporate two additional points of diversity onto the tetracyclic core. Methods for analysis and purification of the intermediates are established for the quality control of the mixture synthesis.     

A practical fluorous benzylidene acetal protecting group for a quick synthesis of disaccharides

A new fluorous benzylidene acetal protecting group was regioselectively introduced into carbohydrates, deprotected under acidic conditions, and reused. Oligosaccharides were synthesized via regioselective conversion of the fluorous acetal group to the benzyl group by traditional reaction conditions. The fluorous compounds were easily separated from non-fluorous by-products by fluorous solid phase extraction.     

Preparative fluorous mixture synthesis of diazonium-functionalized oligo(phenylene vinylene)s

[structure: see text] A series of building blocks for the synthesis of oligo(phenylene vinylene)s (OPVs) and hybrid oligomers were prepared, and alternating Heck coupling and Horner-Wadswoth-Emmons (HWE) reactions were used to couple the building blocks. Model studies were carried out to optimize the reaction strategies. The products were made to bear aryl diazonium functionalities that allow them to be used as surface grafting moieties in hybrid silicon/molecule assemblies. A library of OPV and hybrid oligomer tetramers was synthesized using fluorous mixture synthesis (FMS). The fluorous tags, which are secondary amines bearing different numbers of fluorine atoms, were synthesized and used as phase tags in mixture synthesis. The tags and substrates were anchored together by triazene linkages. The mixture synthesis was monitored by analytical HPLC on a fluorous column, and isolation of final OPV and hybrid oligomer tetramers was achieved by preparative HPLC. At the end of the FMS, after demixing, the tagged products were detagged by cleaving the triazene linkage and generating a series of aryl diazonium compounds. The fluorous tags could be recovered and reused. The NMR spectra of the 1-aryl-3,3-dialkyltriazenes are discussed.     

Perfluoroalkylated-pyridine catalyzed Aldol condensations of aldehydes and ketones in a fluorous biphasic system without fluorous solvent

Aldol condensation of different ketones with various aromatic aldehydes proceeds efficiently in the presence of catalytic amount of perfluoroalkylated-pyridine in a fluorous biphasic system without fluorous solvent, which has prompted various concerns involving cost, solvent leaching, and environmental persistence. The catalyst can be recovered by simple cooling and precipitation and used again.     

Enantiomeric resolution of fluorous mixture by chiral CD columns: asymmetric reduction of a mixture of fluorous ketones

Asymmetric reduction of a mixture of four fluorous ketone analogues was carried out with (R)-oxazaborolidine as a catalyst. The fluorous mixture products were resolved by a reverse phase HPLC with chiral β-cyclodextrin column to result in good separation of the enantiomers.     

Poly(fluoroalkyl acrylate)-bound ruthenium carbene complex: a fluorous and recyclable catalyst for ring-closing olefin metathesis

The synthesis of a fluorous olefin metathesis catalyst derived from the Grubbs second-generation ruthenium carbene complex is described. The air stable fluorous polymer-bound ruthenium carbene complex 1 shows high reactivity in effecting the ring-closing metathesis of a broad spectrum of diene and enyne substrates leading to the formation of di-, tri-, and tetrasubstituted cyclic olefins in minimally fluorous solvent systems (PhCF3/CH2Cl2, 1:9-1:49 v/v). The catalyst can be readily separated from the reaction mixture by fluorous extraction with FC-72 and repeatedly reused. The practical advantage offered by the fluorous catalyst is demonstrated by its sequential use in up to five different metathesis reactions.     

Synthesis of novel fluorous surfactants for microdroplet stabilisation in fluorous oil streams

The synthesis of a number of potential fluorous surfactants, prepared with a view to stabilising microdroplets in microfluidic systems is described. The surfactants comprised compounds with both perfluoropolyether (PFPE) and perfluoroalkyl (PFA) tails with three classes of hydrophilic head group, including crown ethers and hexaethylene glycol. Hydrophilic head groups and alkyl fluorous-based tails were coupled together via amide, ester and ether linkages to afford the fluorous surfactant candidates in good yields. The resulting molecules show promise in forming and stabilising both aqueous and non-aqueous microdroplets in fluorous oil streams within poly(dimethylsiloxane) (PDMS) devices to a greater degree than the pseudosurfactants commonly employed in microdroplet research.