Role of adsorbed surfactant in the reaction of aryl diazonium salts with single-walled carbon nanotubes

Because covalent chemistry can diminish the optical and electronic properties of single-walled carbon nanotubes (SWCNTs), there is significant interest in developing methods of controllably functionalizing the nanotube sidewall. To date, most attempts at obtaining such control have focused on reaction stoichiometry or strength of oxidative treatment. Here, we examine the role of surfactants in the chemical modification of single-walled carbon nanotubes with aryl diazonium salts. The adsorbed surfactant layer is shown to affect the diazonium derivatization of carbon nanotubes in several ways, including electrostatic attraction or repulsion, steric exclusion, and direct chemical modification of the diazonium reactant. Electrostatic effects are most pronounced in the cases of anionic sodium dodecyl sulfate and cationic cetyltrimethylammonium bromide, where differences in surfactant charge can significantly affect the ability of the diazonium ion to access the SWCNT surface. For bile salt surfactants, with the exception of sodium cholate, we find that the surfactant wraps tightly enough such that exclusion effects are dominant. Here, sodium taurocholate exhibits almost no reactivity under the explored reaction conditions, while for sodium deoxycholate and sodium taurodeoxycholate, we show that the greatest extent of reaction is observed among a small population of nanotube species, with diameters between 0.88 and 0.92 nm. The anomalous reaction of nanotubes in this diameter range seems to imply that the surfactant is less effective at coating these species, resulting in a reduced surface coverage on the nanotube. Contrary to the other bile salts studied, sodium cholate enables high selectivity toward metallic species and small band gap semiconductors, which is attributed to surfactant-diazonium coupling to form highly reactive diazoesters. Further, it is found that the rigidity of anionic surfactants can significantly influence the ability of the surfactant layer to stabilize the diazonium ion near the nanotube surface. Such Coulombic and surfactant packing effects offer promise toward employing surfactants to controllably functionalize carbon nanotubes.     

Synthesis and gas-sensing properties of phenylhydrazine-functionalized single wall carbon nanotubes in polymer matrix

Gas sensor material was prepared by encapsulation of functionalized single-walled carbon nanotubes (SWCNT) into a gas-permeable polymer poly(1-trimethylsilyl-1-propyne) (PTMSP). A phenylhydrazino group was used for the functionalization of SWCNTs to improve their solubility and compatibility with polymers. Syntheses were carried out in aqueous surfactant solutions and in pure phenylhydrazine without surfactant. Two different temperatures (24 and 50°C) and two surfactants (sodium dodecyl sulfate and tricaprylmethylammonium chloride — Aliquat®336) were compared. Functionalized SWCNTs were characterized by X-ray photoelectron (XPS), Raman and Fourier transform infrared (FTIR) spectroscopy. Analyses showed that the synthesis at higher temperature in pure phenylhydrazine resulted in the highest functionalization yield. Phenylhydrazine itself proved to be a good solvent for SWCNTs. The functionalized nanotubes were soluble in organic solvents that under the same conditions were appropriate solvents for polymers. The sensitivity of functionalized SWCNT-PTMSP thin film composite to NO₂ gas at room temperature was significantly higher than that of the similar sensor material containing the pristine SWCNTs.      

Theoretical investigation of the stability,electronic and magnetic properties of thiolated single‐wall carbon nanotubes

The addition of SH and OH groups to single‐wall carbon nanotubes (SWCNTs) was investigated employing first principles calculations. In the case of the semiconducting (10, 0) SWCNT the SWCNT‐SH binding energy is weak, 2–4 kcal/mol. However, for the metallic (5, 5) SWCNT it is larger, 7–9 kcal/mol. Thus metallic SWCNTs seem to be more reactive to SH than the semiconducting ones. Indeed, the (6, 6) SWCNT is more reactive to SH than the (10, 0) SWCNT, by 2–3 kcal/mol, something that can be explained only considering the electronic structure of the tube, because the (6, 6) has a larger diameter. The binding energies are larger for the addition of the OH group, 25 and 30 kcal/mol for the (10, 0) and (5, 5) SWCNTs, respectively. When a single OH or SH group is attached to the metallic SWCNTs, we observe important changes in the DOS at the Fermi level. However, when multiple SH groups are attached, the changes in the electronic and magnetic properties depend on the position of the SH groups. The small binding energy found for the SH addition indicates that the successful functionalization of SWCNTs with SH, SCH₃, and S(CH₂)_nSH groups is mostly due to the presence of defects created after acid treatment and to a minor extent by the metallic tubes present in the samples. Perfect semiconducting SWCNTs showed very low reactivity against the SH group. © 2008 Wiley Periodicals, Inc. Int J Quantum Chem, 2009     

Poly(γ‐benzyl‐L‐glutamate)‐functionalized single‐walled carbon nanotubes from surface‐initiated ring‐opening polymerizations of N‐carboxylanhydride

Single‐walled carbon nanotubes (SWCNTs) have been functionalized with poly(γ‐benzyl‐L ‐glutamate) (PBLG) by ring‐opening polymerizations of γ‐benzyl‐L ‐glutamic acid‐based N‐carboxylanhydrides (NCA‐BLG) using amino‐functionalized SWCNTs (SWCNT‐NH₂) as initiators. The SWCNT functionalization has been verified by FTIR spectroscopy and transmission electron microscopy. The FTIR study reveals that surface‐attached PBLGs adopt random‐coil conformations in contrast to the physically absorbed or bulk PBLGs, which exhibit α‐helical conformations. Raman spectroscopic analysis reveals a significant alteration of the electronic structure of SWCNTs as a result of PBLG functionalization. The PBLG‐functionalized SWCNTs (SWCNT‐PBLG) exhibit enhanced solubility in DMF. Stable DMF solutions of SWCNT‐PBLG/PBLG with a maximum SWCNTs concentration of 259 mg L^?1 can be readily obtained. SWCNT‐PBLG/PBLG solid composites have been characterized by differential scanning calorimetry, thermogravimetric analysis, wide/small‐angle X‐ray scattering (W/SAXS), scanning electron microscopy, and polarized optical microscopy for their thermal or morphological properties. Microfibers containing SWCNT‐PBLG and PBLG can also be prepared via electrospinning. WAXS characterization reveals that SWCNTs are evenly distributed among PBLG rods in solution and in the solid state where PBLGs form a short‐range nematic phase interspersed with amorphous domains. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 2340–2350, 2010     

Determination of the surfactant density on SWCNTs by analytical ultracentrifugation

We report on the extensive characterization of single-walled carbon nanotubes (SWCNTs) dispersed in a variety of surfactants, such as sodium dodecyl benzene sulfonate (SDBS), sodium cholate (SC), and three synthesized perylene-based surfactants, by using differential sedimentation in H(2)O and D(2)O. Multidimensional evaluation of the absorption profiles over radius, wavelength, and time allows the determination of the anhydrous specific volumes of the SWCNT-surfactant complexes as well as the concentration of the surfactant reservoir in free micelles with very slow sedimentation coefficients (<1 Svedberg). Among the perylene bisimide surfactants, the smallest derivative is densely adsorbed on the nanotube backbone with an anhydrous specific volume significantly above that of SC or SDBS. Bulky Newkome dendritic groups on one or both ends of the perylene moiety gradually reduce the adsorption density, in accord with the absolute adsorption between 0.66 and 1.7 mmol surfactant per gram SWCNTs. Furthermore, hydrodynamic analysis reveals that SDBS favors the "tails-on" configuration. The distribution of sedimentation coefficients of SWCNTs prepared by high-pressure carbon monoxide decomposition (HiPco) is broader and shifted to faster sedimentation than those prepared by using cobalt-molybdenum catalysis (CoMoCAT), which reflects the polydispersity in diameter and length.     

Comparison of the quality of aqueous dispersions of single wall carbon nanotubes using surfactants and biomolecules

The use of single wall carbon nanotubes (SWCNTs) in current and future applications depends on the ability to process SWCNTs in a solvent to yield high-quality dispersions characterized by individual SWCNTs and possessing a minimum of SWCNT bundles. Many approaches for the dispersion of SWCNTs have been reported. However, there is no general assessment which compares the relative quality and dispersion efficiency of the respective methods. Herein we report a quantitative comparison of the relative ability of "wrapping polymers" including oligonucleotides, peptides, lignin, chitosan, and cellulose and surfactants such as cholates, ionic liquids, and organosulfates to disperse SWCNTs in water. Optical absorption and fluorescence spectroscopy provide quantitative characterization (amount of SWCNTs that can be suspended by a given surfactant and its ability to debundle SWCNTs) of these suspensions. Sodium deoxy cholate (SDOCO), oligonucleotides (GT)(15), (GT)(10), (AC)(15), (AC)(10), C(10-30), and carboxymethylcellulose (CBMC-250K) exhibited the highest quality suspensions of the various systems studied in this work. The information presented here provides a good framework for further study of SWCNT purification and applications.     

Hydrogen adsorption on Ce/SWCNT systems: a DFT study

The adsorption of H(2) on Ce doped single-walled carbon nanotubes (SWCNT) and graphene are investigated by using density functional theory. For both systems, it is found that Ce preferentially occupies the hollow site on the outside. The results indicate that Ce/SWCNT system is a good candidate for hydrogen storage where six H(2) per Ce can be adsorbed and 5.14 wt% H(2) can be stored in the Ce(3)/SWCNT system. Among metal-doped SWCNTs, Ce exhibits the most favorable hydrogen adsorption characteristics in terms of the adsorption energy and the uptake capacity. The hybridization of the Ce-4f and Ce-5d orbitals with the H orbital contributes to the H(2) binding where Ce-4f electrons participate in the hybridization due to the instability of the 4f state. The interaction between H(2) and Ce/SWCNT is balanced by the electronic hybridization and electrostatic interactions. Curvature of SWCNT changes the size of the binding energy of Ce and C and the adsorption energy of H(2) on Ce.     

Chemically assisted directed assembly of carbon nanotubes for the fabrication of large-scale device arrays

We report the directed assembly of single-walled carbon nanotubes (SWCNTs) at lithographically defined positions on gate oxide surfaces, allowing for the high yield ( approximately 90%) and parallel fabrication of SWCNT device arrays. SWCNTs were first chemically functionalized through diazonium chemistry with a hydroxamic acid end group that both renders the SWCNTs water-soluble and discriminately binds the SWCNTs to basic metal oxide surfaces (i.e., hafnium oxide (HfO2)). The functionalized SWCNTs are then assembled from an aqueous solution into narrow trenches etched into SiO2 films with HfO2 at the bottom. The side walls of the patterned trenches induce alignment of the SWCNTs along the length of the trenches. Heating the structures to 600 degrees C removes the organic moieties, leaving pristine SWCNTs as evidenced by Raman spectroscopy and electrical measurements. Palladium source-drain electrodes deposited perpendicular to the trench length readily contact the ends of the aligned SWCNTs. The resultant devices exhibit the electrical performance expected for SWCNT devices, with no performance deterioration as a result of the placement process. This technique allows for the directed assembly and alignment of SWCNTs over a large area and results in a high yield of working devices, presenting a promising path toward large-scale SWCNT device integration.     

Dynamics of local chirality during SWCNT growth: armchair versus zigzag nanotubes

We present an analysis of the dynamics of single-walled carbon nanotube (SWCNT) chirality during growth, using the recently developed local chirality index (LOCI) method [ Kim et al. Phys. Rev. Lett. 2011 , 107 , 175505 ] in conjunction with quantum chemical molecular dynamics (QM/MD) simulations. Using (5,5) and (8,0) SWCNT fragments attached to an Fe(38) catalyst nanoparticle, growth was induced by periodically placing carbon atoms at the edge of the SWCNT. For both armchair and zigzag SWCNTs, QM/MD simulations indicate that defect healing-the process of defect removal during growth-is a necessary, but not sufficient, condition for chirality-controlled SWCNT growth. Time-evolution LOCI analysis shows that healing, while restoring the pristine hexagon structure of the growing SWCNT, also leads to changes in the local chirality of the SWCNT edge region and thus of the entire SWCNT itself. In this respect, we show that zigzag SWCNTs are significantly inferior in maintaining their chirality during growth compared to armchair SWCNTs.     

Functionalization of single-walled carbon nanotubes with (R-)oxycarbonyl nitrenes

Sidewall functionalization of single-walled carbon nanotubes (SWCNTs) via the addition of (R-)oxycarbonyl nitrenes allows for the covalent binding of a variety of different groups such as alkyl chains, aromatic groups, dendrimers, crown ethers, and oligoethylene glycol units. Such additions lead to a considerable increase in the solubility in organic solvents such as 1,1,2,2-tetrachloroethane (TCE), dimethyl sulfoxide (DMSO), and 1,2-dichlorobenzene (ODCB). The highest solubilities of 1.2 mg/mL were found for SWCNT adducts with nitrenes containing crown ether of oligoethylene glycol moieties in DMSO and TCE, respectively. The presence of chelating donor groups within the addends allowed for the complexation of Cu(2+) and Cd(2+). Atomic force microscopy (AFM) and transmission electron microscopy (TEM) revealed that the functionalized tubes form thin bundles with typical diameters of 10 nm. The presence of thin bundles in solution is supported by (1)H NMR spectroscopy. The elemental composition of the functionalized SWCNT was determined by X-ray photoelectron spectroscopy (XPS). The use of Raman and electron absorption spectroscopy (UV/Vis-nIR) showed that the electronic properties of the SWCNTs are mostly retained after functionalization, indicating a low degree of addition within this series of SWCNT derivatives.     

Unraveling the 13C NMR chemical shifts in single-walled carbon nanotubes: dependence on diameter and electronic structure

The atomic specificity afforded by nuclear magnetic resonance (NMR) spectroscopy could enable detailed mechanistic information about single-walled carbon nanotube (SWCNT) functionalization as well as the noncovalent molecular interactions that dictate ground-state charge transfer and separation by electronic structure and diameter. However, to date, the polydispersity present in as-synthesized SWCNT populations has obscured the dependence of the SWCNT (13)C chemical shift on intrinsic parameters such as diameter and electronic structure, meaning that no information is gleaned for specific SWCNTs with unique chiral indices. In this article, we utilize a combination of (13)C labeling and density gradient ultracentrifugation (DGU) to produce an array of (13)C-labeled SWCNT populations with varying diameter, electronic structure, and chiral angle. We find that the SWCNT isotropic (13)C chemical shift decreases systematically with increasing diameter for semiconducting SWCNTs, in agreement with recent theoretical predictions that have heretofore gone unaddressed. Furthermore, we find that the (13)C chemical shifts for small diameter metallic and semiconducting SWCNTs differ significantly, and that the full-width of the isotropic peak for metallic SWCNTs is much larger than that of semiconducting nanotubes, irrespective of diameter.     

Enhanced adsorption affinity of anionic perylene-based surfactants towards smaller-diameter SWCNTs

We present evidence from multiple characterization methods, such as emission spectroscopy, zeta potential, and analytical ultracentrifugation, to shed light on the adsorption behavior of synthesized perylene surfactants on single-walled carbon nanotubes (SWCNTs). On comparing dispersions of smaller-diameter SWCNTs prepared by using cobalt-molybdenum catalysis (CoMoCAT) with the larger-diameter SWCNTs prepared by high-pressure carbon monoxide decomposition (HiPco), we find that the CoMoCAT-perylene surfactant dispersions are characterized by more negative zeta potentials, and higher anhydrous specific volumes (the latter determined from the sedimentation coefficients by analytical ultracentrifugation), which indicates an increased packing density of the perylene surfactants on nanotubes of smaller diameter. This conclusion is further supported by the subsequent replacement of the perylene derivatives from the nanotube sidewall by sodium dodecyl benzene sulfonate (SDBS), which first occurs on the larger-diameter nanotubes. The enhanced adsorption affinity of the perylene surfactants towards smaller-diameter SWCNTs can be understood in terms of a change in the supramolecular arrangement of the perylene derivatives on the scaffold of the SWCNTs. These findings represent a significant step forward in understanding the noncovalent interaction of π-surfactants with carbon nanotubes, which will enable the design of novel surfactants with enhanced selectivity for certain nanotube species.     

Residual Metal Impurity Aids Facile In Situ Electrochemical Surface Derivatization of Single‐Walled Carbon Nanotubes

Residual metal impurities were exploited as reactants in the functionalization of the surface of single‐walled carbon nanotubes (SWCNT) with nickel hexacyanoferrate (NiHCF) by simple electrochemical cycling in ferricyanide solutions. This facile in situ electrochemical modification process provides intimate contact between NiHCF and SWCNTs that improves the stability of the redox property and reactivity of NiHCF. The characteristic redox behavior of NiHCF on SWCNT surfaces can be used as an electrochemical probe to access qualitative and quantitative information on unknown electroactive metal impurities in SWCNTs. Significantly, the NiHCF‐modified SWCNTs exhibit pseudocapacitive behavior, and the calculated specific capacitances are 710 and 36 F g^?1 for NiHCF‐SWCNTs and SWCNTs respectively. Furthermore, NiHCF‐SWCNTs were transformed into Ni(OH)₂/SWCNTs and used for enzymeless glucose oxidation.     

Arginine Side Chains as a Dispersant for Individual Single‐Wall Carbon Nanotubes

Charged peptides and proteins disperse single‐wall carbon nanotubes (SWCNTs) in aqueous solutions. However, little is known about the role of their side chains in their interactions with SWCNTs. Homopolypeptide–SWCNT systems are ideal for investigating the mechanisms of such interactions. In this study, we demonstrate that SWCNTs are individually dispersed by poly‐L ‐arginine (PLA). The debundled SWCNTs exhibited a distinct fluorescence. The dispersibility of SWCNTs with PLA was greater than that of SWCNTs with poly‐L ‐lysine (PLL). Molecular dynamics simulations suggest that the side chains of PLA have stronger interactions with the sidewalls of SWCNTs compared with those of PLL. The guanidinium group at the end of the side chain of an arginine residue plays an important role in the interaction with SWCNTs, likely through hydrophobic, van der Waals, and π–π interactions. PLA can be useful as a tool for the dispersion of SWCNTs and can be used to non‐covalently anchor materials to SWCNTs with strong binding.     

Structure-dependent reactivity of semiconducting single-walled carbon nanotubes with benzenediazonium salts

The addition of diazonium salts to single-walled carbon nanotubes (SWCNTs) in aqueous surfactant suspensions quenches the intrinsic near-infrared fluorescence of semiconducting SWCNTs through sidewall chemical reactions. Spectrally resolved fluorescence spectroscopy of mixed SWCNT samples has been used to measure structure-dependent relative reactivities in the initial stages of these reactions. For several 4-substituted benzenediazonium salts, Ar-R (Ar = N 2 (+)-C 6H 4 and R = Cl, NO 2, OMe), reactivities at pH 10 were found to be greatest for SWCNTs having the largest band gaps. The magnitude of this band gap dependence varies according to the R-group of the salt, with R = OMe showing the strongest variation. For R = OH, acidification of the sample to pH 5.5 results in reversal of the structural trend, as smaller band gap SWCNTs show slightly greater reactivities. The derivatization reactions observed here proceed concurrently, although at different rates, for semiconducting and metallic SWCNT species. These results therefore provide insight into the difficulties of separating metallic and semiconducting SWCNTs through selective reaction schemes and underscore the need for fluorescence spectroscopy to be used in assessing semiconducting SWCNT reactions.     

Dramatic reduction of IR vibrational cross sections of molecules encapsulated in carbon nanotubes

Combined temperature-programmed desorption and IR studies suggest that absorption cross sections of IR-active vibrations of molecules "strongly" bound to single-wall carbon nanotubes (SWCNTs) are reduced at least by a factor of 10. Quantum chemical simulations show that IR intensities of endohedrally encapsulated molecules are dramatically reduced, and identify dielectric screening by highly polarizable SWCNT sidewalls as the origin of such "screening". The observed intensity reduction originates from a sizable cancellation of adsorbate dipole moments by mirror charges dynamically induced on the nanotube sidewalls. For exohedrally adsorbed molecules, the dielectric screening is found to be orientation-dependent with a smaller magnitude for adsorption in groove and interstitial sites. The presented results clearly demonstrate and quantify the screening effect of SWCNTs and unequivocally show that IR spectroscopy cannot be applied in a straightforward manner to the study of peapod systems.     

A new analytical approach based on asymmetrical flow field-flow fractionation coupled to ultraviolet spectrometry and light scattering detection for SWCNT aqueous dispersion studies

This work demonstrates the potential of asymmetrical flow field-flow fractionation (A4F) coupled to Ultraviolet spectrometry (UV) and multi-angle light scattering (MALS) for the study of single-walled carbon nanotube (SWCNT) dispersion in aqueous solutions containing a surfactant. The results indicate that this technique is a powerful analytical tool that is able to evaluate SWCNT dispersion states in aqueous media and, more importantly, determine the presence or absence of aggregates, the numbers and sizes of different SWCNT populations and the SWCNT size distribution. Dynamic light scattering was employed to complete and demonstrate the relevance of the data that were obtained via A4F-UV-MALS. Two different anionic surfactants that are used to disperse SWCNTs were then studied. The dispersing powers of the surfactants were experimentally evaluated based on their structural organizations. This study demonstrates that surfactant concentration and sonication energy are key parameters that control the SWCNT dispersion state and SWCNT structural integrity therein.     

单壁碳纳米管在胆酸类表面活性剂中的分散及手性碳管(6,5)的双水相分离方法

选用牛磺脱氧胆酸钠和脱氧胆酸钠等6种胆酸类表面活性剂,考察其对单壁碳纳米管(SWCNTs)的分散能力.紫外-可见-近红外吸收光谱测试结果表明,在超声功率为225 W,超声时间1 h的分散条件下,胆酸类表面活性剂均能对SWCNTs均匀分散,均可作为SWCNTs的分散剂.在相同条件下,质量分数为2%的牛磺脱氧胆酸钠对SWCNTs的分散能力最强,脱氧胆酸钠对SWCNTs的分散能力最弱.此外,还采用聚乙二醇/葡聚糖双水相系统对SWCNTs分散液进行了萃取分离,获得了纯度较高的手性SWCNTs(6,5).所筛选的SWCNTs分散剂及采用的双水相分离方法为单一手性SWCNTs的分离提供了一定的技术参考.     

Sequence-specific self-stitching motif of short single-stranded DNA on a single-walled carbon nanotube

The DNA-single-walled carbon nanotube (SWCNT) hybrid molecule has attracted significant attention recently for its ability to disperse and sort SWCNTs according to their chirality. Key for utilizing their unique properties is an understanding of the structure of DNA adsorbed on the SWCNT surface, which we study here using molecular simulations. Using replica exchange molecular dynamics (REMD), we explore equilibrium structures formed by single strands of 12-mer oligonucleotides, of varying sequence, adsorbed on a (6,5)-SWCNT. We find a consistent motif in which the DNA strand forms a right-handed helical wrap around the SWCNT, stabilized by "stitches" (hydrogen bonding between distant bases) to itself. Variability among equilibrium populations of DNA self-stitched structures was observed and shown to be directly influenced by DNA sequence and composition. Competition between conformational entropy and hydrogen bonding between bases is predicted to be responsible for the formation of random versus stitched configurations.