Diazotization of the amino acid [closo-1-CB9H8-1-COOH-6-NH3] and reactivity of the [closo-1-CB9H8-1-COO-6-N2]- anion

A comparative study of the reactivity of dinitrogen acids [closo-1-CB(9)H(8)-1-COOH-10-N(2)] (3[10]) and [closo-1-CB(9)H(8)-1-COOH-6-N(2)] (3[6]) was conducted by diazotization of a mixture of amino acids [closo-1-CB(9)H(8)-1-COOH-6-NH(3)] (1[6]) and [closo-1-CB(9)H(8)-1-COOH-10-NH(3)] (1[10]) with NO(+)BF(4)(-) in the presence of a heterocyclic base (pyridine, 4-methoxypyridine, 2-picoline, or quinoline). The 10-amino acid 1[10] formed an isolable stable 10-dinitrogen acid 3[10], while the 6-dinitrogen carboxylate 3[6](-) reacted in situ, giving products of N-substitution at the B6 position with the heterocyclic solvent (4[6]). The molecular and crystal structures for pyridinium acid 4[6]a were determined by X-ray crystallography. The electronic structures and reactivity of the 6-dinitrogen derivatives of the {1-CB(9)} cluster were assessed computationally at the B3LYP/6-31G(d,p) and MP2/6-31G(d,p) levels of theory and compared to those of the 10-dinitrogen, 2-dinitrogen, and 1-dinitrogen analogues.     

Reductive degradation of nido-1-CB8H12 into smaller-cage carborane systems via new monocarbaboranes [arachno-5-CB8H13](-) and closo-2-CB6H8

Treatment of the nido-1-CB8H12 (1) carborane with NaBH4 in THF at ambient temperature led to the isolation of the stable [arachno-5-CB8H13]- (2(-)), which was isolated as Na+[5-CB8H13]-.1.5 THF and PPh4 +[5-CB8H13]- in almost quantitative yield. Compound 2(-) underwent a boron-degradation reaction with concentrated hydrochloric acid to afford the arachno-4-CB7H13 (3) carborane in 70 % yield, whereas reaction between 2(-) and excess phenyl acetylene in refluxing THF gave the [closo-2-CB6H7]- (4-) in 66 % yield. Protonation of the Cs+4(-) salt with concentrated H2SO4 or CF3COOH in CH2Cl2 afforded a new, highly volatile 2-CB6H8 (4) carborane in 95 % yield, the deprotonation of which with Et3N in CH2Cl2 leads quantitatively to Et3NH+[2-CB6H7](-) (Et3NH+4(-)). Both compounds 4- and 4 can be deboronated through treatment with concentrated hydrochloric acid in CH2Cl2 to yield the carbahexaborane nido-2-CB5H9 (5) in 60 % yield. New compounds 2-, 3, and 4 were structurally characterised by the ab initio/GIAO/MP2/NMR method. The method gave superior results to those carried out using GIAO-HF when relating the calculated 11B NMR chemical shifts to experimental data.     

A practical synthesis of isomerically pure 1,10-difunctionalized derivatives of the [closo-1-CB9H10] anion

The isomer-free [closo-1-CB9H(8)-1-COOH-10-I]- anion was prepared in four steps and 10% overall yield from B10H14. The key step is the skeletal isomerization of the [closo-2-CB9H8-2-COOH-7-I]- anion to a mixture of the 10- and 6-iodo derivatives of [closo-1-CB9H(9)-1-COOH]- formed in up to a 3:1 ratio. The carboxylic acid 4 was converted to the amine [closo-1-CB9H(8)-1-NH(2)-10-I]- using the Curtius reaction. The relative thermodynamic stability of each product was calculated at the DFT and MP2 levels of theory. The regioselectivity of electrophilic substitution in [closo-CB9H10]- derivatives was briefly investigated using the NBO population analysis of the MP2 wave function.     

Anion driven ionic liquid crystals: The effect of the connecting group in [closo-1-CB9H10]- derivatives on mesogenic properties

Replacement of the connecting CH₂ group in ionic liquid crystal 1a[Pyr] with an oxygen atom in 1b[Pyr] resulted in significant destabilisation of the nematic and, to a greater extent, smectic A (SmA) phases, as established from binary mixture studies in 2a[Pyr]. Density functional theory (DFT) modelling of both anions suggests that the destabilisation results from the difference in charge distribution rather than conformational changes. Binary mixture studies demonstrated that all three ionic liquid crystals are compatible with a non-ionic benzoate nematic host 3a.     

Monocarbaborane anion chemistry. The elusive C-arylated [PhCB11H11]-, [PhCB9H9]- and [PhCB8H8]- anions

B10H14 and PhCHO yield [6-Ph-nido-6-CB9H11]- (94%), from which the nine-vertex C-phenyl monocarbaborane anion [4-Ph-closo-4-CB8H8]- (68%) can be obtained by heating at 200 degrees C, and from which the twelve- and ten-vertex analogues [1-Ph-closo-1-CB11H11]- (50%) and [4-Ph-closo-4-CB9H9]- (25%) can be obtained by heating at 210 degrees C with BH3(NEt3).     

Crown compounds for anions: sandwich and half-sandwich complexes of cyclic trimetric perfluoro-o-phenylenemercury with polyhedral closo-[B10H10]2- and closo-[B12H12]2- anions

It has been shown by IR and NMR spectroscopy that cyclic trimeric perfluoro-o-phenylenemercury (o-C6F4-Hg)3 (1) is capable of binding closo-[B10H10]2- and closo-[B12H12]2- anions to form complexes [[(o-C6F4Hg)3](B10-H10)]2- (2), [[(o-C6F4Hg)3]2(B10H10)]2-(3), [[(o-C6F4Hg)3](B12H12)]2- (4), and [[(o-C6F4Hg)3]2(B12H12)]2- (5). According to IR data, the bonding of the [B10H10]2- and [B12H12]2- ions to the macrocycle in these complexes is accomplished through the formation of B-H-Hg bridges. Complexes 2, 3, and 5 have been isolated in analytically pure form and have been characterized by spectroscopic means. X-ray diffraction studies of 3 and 5 have revealed that these compounds have unusual sandwich structures, in which the polyhedral di-anion is located between the planes of two molecules of 1 and is bonded to each of them through two types of B-H-Hg bridges. One type is the simultaneous coordination of a B-H group to all three Hg atoms of the macrocycle. The other type is the coordination of a B-H group to a single Hg atom of the cycle. According to X-ray diffraction data, complex 2 has an analogous but half-sandwich structure. The obtained complexes 2-5 are quite stable; their stability constants in THF/acetone (1:1) at 20 degrees C have been determined as 1.0 x 10(2)Lmol(-1), 2.6 x 10(3)L(2)mol(2), 0.7 x 10(2)Lmol(-1), and 0.98 x 10(3)L(2)mol(-2), respectively.     

Preparation of 1-p-halophenyl and 1-p-biphenylyl substituted monocarbadodecaborate anions [closo-1-Ar-CB11H11]- by insertion of arylhalocarbenes into [nido-B11H14]-

In the presence of a strong base, benzal chloride (C(6)H(5)CHCl(2)) and its p-substituted derivatives react with [nido-B(11)H(14)](-) to yield [closo-1-p-X-C(6)H(4)-CB(11)H(11)](-) (X = H, F, Cl, Br, I, Ph), presumably by insertion of an arylhalocarbene and oxidation. On a 1-g scale, the yields are 30-40%, except in the case of p-iodobenzal chloride, which yields only 12% of the insertion product.     

Salts of the Lewis-acidic dianion [Hg(closo-1-CB11F11)2]2-: coordination of acetonitrile and water

The coordination of acetonitrile and water to the Hg atom in [Hg(closo-1-CB(11)F(11))(2)](2-) (1) reveals the Lewis acidity of the Hg(II) center, which is unprecedented, since 1 is a dianion. Both coordination compounds were characterized by single-crystal X-ray diffraction, vibrational spectroscopy, and differential scanning calorimetry (DSC). In contrast, the Hg atom in [PhHg(closo-1-CB(11)F(11))](-) (2) does not coordinate to CH(3)CN and H(2)O, although it has only a single negative charge.     

一个新的二维配位聚合物:{Cu_2[C_(10)H_8Cl_2NO_4]_2[C_(10)H_8N_2]_3}_n的合成及其晶体结构

采用铜(Ⅱ)盐和3,5-二氯水杨醛缩丝氨酸以及4,4′-联吡啶在乙醇水溶液中合成了具有二维层状的配位聚合物.通过元素分析、红外光谱对该配位聚合物进行了表征,并利用X射线单晶衍射仪对其结构进行了鉴定.晶体结构表明,该标题配合物属三斜方晶系,空间群C2/c,晶胞参数为a=2.711(3)nm,b=2.711(3)nm,c=4.977(5)nm;α=90.00°,β=90.00°,γ=120.00°,V=3.167 8 nm3,Z=18,Dc=1.173 g.cm-3,F(000)=11 448,μ=0.807 mm-1,R1=0.078 8,wR2=0.187 2.     

二{2-{2-{9-乙基-6-[2-(8-羟基喹啉-2-基)乙烯基]咔唑-3-基}乙烯}-8-羟基喹啉}锌配合物的合成与荧光光谱特性

合成了新的N-乙基咔唑衍生物: 3,6-二[2-(8-羟基喹啉基)乙烯基]咔唑(4)及其锌配合物(5); 化合物4经质谱、红外光谱、核磁共振氢谱、元素分析表征其结构, 并测定了它的荧光光谱. 结果显示: 化合物4的荧光发射为蓝绿色光(500 nm), 其发射光谱随着溶剂极性的增大荧光光谱向长波方向移动(即发生红移); 同时, 考察了化合物5的荧光性质, 其荧光发光峰值为600 nm, 与2-甲基-8-羟基喹啉锌相比, 发生了明显的红移.     

Carbonyl-metal fragment insertion into eight-vertex [closo-1-CB7H8]-. Facile synthesis of ten-vertex metalladicarbollide complexes [2,2,2-(CO)3-1-OH-closo-2,1,10-MC2B7H8]n-{M = Fe, Ru (n= 0), Mn, Re (n= 1)}

Insertion of {M(CO)4} fragments (M = Fe, Ru, Mn, Re) into the eight-vertex monocarborane anion [closo-1-CB7H8]- affords ten-vertex metal-dicarbollide complexes.     

Monocarbaborane chemistry. Preparation and characterisation of [4-CB8H9]-, the 'missing' closo-carbaborane anion

Thermolysis in the solid state of Cs+[arachno-CB9H14]-, or of Cs+[nido-CB9H12]-, or the oxidation of nido-1-CB8H12 with I2 in THF at -78 degrees C in the presence of NEt3, gives the first nine-vertex closo monocarbaborane, the stable [closo-4-CB8H9]- anion, in yields of 56, 61 and 75%, respectively.     

Diselenophosphate‐Induced Conversion of an Achiral [Cu20H11{S2P(OiPr)2}9] into a Chiral [Cu20H11{Se2P(OiPr)2}9] Polyhydrido Nanocluster

A polyhydrido copper nanocluster, [Cu₂₀H₁₁{Se₂P(OiPr)₂}₉] ( 2_H ), which exhibits an intrinsically chiral inorganic core of C₃ symmetry, was synthesized from achiral [Cu₂₀H₁₁{S₂P(OiPr)₂}₉] ( 1_H ) of C_3h symmetry by a ligand‐exchange method. The structure has a distorted cuboctahedral Cu₁₃ core, two triangular faces of which are capped along the C₃ axis, one by a Cu₆ cupola and the other by a single Cu atom. The Cu₂₀ framework is further stabilized by 9 diselenophosphate and 11 hydride ligands. The number of hydride, phosphorus, and selenium resonances and their splitting patterns in multinuclear NMR spectra of 2_H indicate that the chiral Cu₂₀H₁₁ core retains its C₃ symmetry in solution. The 11 hydride ligands were located by neutron diffraction experiments and shown to be capping μ₃‐H and interstitial μ₅‐H ligands (in square‐pyramidal and trigonal‐bipyramidal cavities), as supported by DFT calculations on [Cu₂₀H₁₁(Se₂PH₂)₉] ( 2_H′ ) as a simplified model.     

H10[NiMoV12O40{Ni(H2O)3}4]的水热合成和晶体结构

在水热的条件下合成了1个标题的Mo-Ni-O异核簇合物，化学式为H34NiMo12O52(Mr=2311.10)，用单晶X射线衍射方法测定了它的结构，该晶体属四方晶系，I4l/amd空间群，晶胞参数为a=15.319(2),c=30.645(3)A,V=7191.2(16)A^3,Z=4,Dc=2.135g/cm^3,μ＝3．369mm^-1,F(000)=4376,1036个可观察衍射点（I＞2σ（I）），最终结构偏离因子R＝0．0560，wR=0.1632,S=1.002，该化合物簇阴离子笼中心是Ni^2 ，由12个MoO6八面体和4个NiO6八面体通过共角和共边构成。