The thermal degradation of some alkali metal salts of poly(itaconic acid)

The Li-, Na- and K salts of poly(itaconic acid) (PIA) were prepared by treating the polyacid with the corresponding aqueous hydroxide.The resulting polysalts were analyzed by elemental analysis, FTIR spectroscopy and thermogravimetry. The results indicate that the polysalts are thermally more stable than the parent PIA, they all degrade in a similar manner and somewhat more complexly than the poly(methacrylic acid) salts.     

Polysalt formation with poly(carboxylic acid)s

Polysalts have been prepared from poly(acrylic acid), poly(itaconic acid) and two alternating copolymers of maleic anhydride with propene and α-methyl styrene, acting as the polyanions, and several polycations. The stoichiometry and water retention values of the polysalts have been determined and compared with those prepared using carboxymethyl cellulose (CMC). It was observed that “nonstoichiometric” polysalts were formed if the “theoretical” carboxyl content was used to calculate the composition. Stoichiometric polysalts were obtained with CMC. The results are discussed in terms of the acid strength and distribution of the anionic groups in the polymers; it is concluded that both factors can influence the composition of the polysalts formed.     

Über Polyanion-Polykation-Komplexe mit Polyphosphat

Polyanion-Polycation Complexes with Polyphosphate With two Na polyphosphates of different molar weight and a series of cationic polyelectrolytes (polydimethyldiallylammonium chloride, polyethylenimine, cationically modified polyacryloamides of different charge density) polysalts (symplexes) have been prepared. The precipitates were investigated with regard to stoichiometry of cationic to anionic groups, with regard to swelling in water, and with regard to morphology. Applying special conditions of component concentration, stoichiometric 1:1 symplexes were obtained also with polyphosphate. According to our results, the cohesion in these polyphosphate symplexes is caused mainly by electrostatic forces only, in contrast to symplexes with anionic cellulose derivatives.     

Thermal properties and flammability of fibres made from polyimidoamide nanocomposite

The effects of basic fibre-forming parameters on the thermal properties and flammability of fibres from polyimidoamide (PIA) nanocomposite have examined. The comparative analysis of the properties of fibres from modified PIA and PIA nanocomposite has been conducted. The multi-functional fibres prepared from PIA nanocomposite show increased porosity and sorption properties as well as a high thermal stability and reduced flammability in comparison with fibres without MMT.     

Organometallic polymers. XIV. Copolymerization of vinylcyclopentadienyl manganese tricarbonyl and vinylferrocene with N-vinyl-2-pyrrolidone

N-Vinyl-2-pyrrolidone(I) has been copolymerized with vinylferrocene(II) and vinylcyclopentadienyl manganese tricarbonyl(III) in degassed benzene solutions with the use of azobisisobutyronitrile (AIBN) as the initiator. The polymerizations proceed smoothly, and the relative reactivity ratios were determined as r₁ = 0.66, r₂ = 0.40 (for copolymerization of I with II, M₁ defined as II) and r₁ = 0.14 and r₂ = 0.09 (for copolymerization of I with III, M₁ defined as III). These copolymers were soluble in benzene, THF, chloroform, CCl₄, and DMF. Molecular weights were determined by viscosity and gel-permeation chromatography studies (universal calibration technique.) The copolymers exhibited values of M?_n between 5 × 10³ and 10 × 10³ and M?_w between 7 × 10³ and 17 × 10³ with M?_w/M?_n < 2. Upon heating to 260°C under N₂, copolymers of III underwent gas evolution and weight loss. The weight loss was enhanced at 300°C, and the polymers became in creasingly insoluble. Copolymers of vinylferrocene were oxidized to polyferricinium salts upon treatment with dichlorodicyanoquinone (DDQ) or o-chloranil (o-CA) in benzene. Each unit of quinone incorporated into the polysalts had been reduced to its radical anion. The ratio of ferrocene to ferricinium units in the polysalts was determined. The polysalts did not melt at 360°C and were readily soluble only in DMF.     

Molybdenum-Containing polysalts of the poly[ferricene-1,2(1,3:1,1′)diyl-methylene] cation

Poly(ferricene-1,2(1,3:1,1′)diyl-methylene) polycations, generated from the neutral precursor polymer 1 (M?_n=2800) by dioxygen (O₂) oxidation in sulfuric acid medium, are paired first, in a model reaction, with the hexafluorophosphate anion and, in the principal series of experiments, with the two molybdenum-containing complex anions, octamolybdate and phosphododecamolybdate. The model poly(hexafluorophosphate) 2b, as well as the polymolybdates 2c and 2d, precipitate from aqueous acidic solution of the corresponding polysulfate 2a after anion exchange; scopically. In addition to the hexafluorophosphate anion, the model polysalts 2b contain small proportions, typically 5-15%, of sulfate anion (probably present as HSO), indicating incompleteness of the anion exchange process. Analytical data suggest similarly incomplete exchange of anions also for the polymolybdates 2c and 2d. Oxidation of ferrocene units along the polymer chain is practically complete in the great majority of polysalts 2 synthesized. The molybdenum-containing polymers are of interest as plant micronutrients possessing slow-release properties.     

The chemistry and the stereochemistry of poly(N-alkyliminoalanes) : VI. A novel synthesis of poly(N-alkyliminoalanes) by reaction of alkali metal alanates with primary amines

A novel synthesis of poly(N-alkyliminoalanes) (PIA) is reported. This involves the reaction in hydrocarbon solvents of LiAlH₄ or NaAlH₄ with primary amines having a nitrogen with α- or β- secondary carbon atoms or with tertbutylamine. Complexes of iminoalanes with alkali metal hydrides are obtained from linear amines. The same reaction carried out in polar solvents always gives complexes of PIA with LiH or NaH and the solvent. This new synthesis is simpler and convenient for producing soluble and well characterized PIA, some of which are not obtainable by other methods.     

Periodic sequence distribution of product ion abundances in electron capture dissociation of amphipathic peptides and proteins

The rules for product ion formation in electron capture dissociation (ECD) mass spectrometry of peptides and proteins remain unclear. Random backbone cleavage probability and the nonspecific nature of ECD toward amino acid sequence have been reported, contrary to preferential channels of fragmentation in slow heating-based tandem mass spectrometry. Here we demonstrate that for amphipathic peptides and proteins, modulation of ECD product ion abundance (PIA) along the sequence is pronounced. Moreover, because of the specific primary (and presumably secondary) structure of amphipathic peptides, PIA in ECD demonstrates a clear and reproducible periodic sequence distribution. On the one hand, the period of ECD PIA corresponds to periodic distribution of spatially separated hydrophobic and hydrophilic domains within the peptide primary sequence. On the other hand, the same period correlates with secondary structure units, such as α-helical turns, known for solution-phase structure. Based on a number of examples, we formulate a set of characteristic features for ECD of amphipathic peptides and proteins: (1) periodic distribution of PIA is observed and is reproducible in a wide range of ECD parameters and on different experimental platforms; (2) local maxima of PIA are not necessarily located near the charged site; (3) ion activation before ECD not only extends product ion sequence coverage but also preserves ion yield modulation; (4) the most efficient cleavage (e.g. global maximum of ECD PIA distribution) can be remote from the charged site; (5) the number and location of PIA maxima correlate with amino acid hydrophobicity maxima generally to within a single amino acid displacement; and (6) preferential cleavage sites follow a selected hydrogen spine in an α-helical peptide segment. Presently proposed novel insights into ECD behavior are important for advancing understanding of the ECD mechanism, particularly the role of peptide sequence on PIA. An improved ECD model could facilitate protein sequencing and improve identification of unknown proteins in proteomics technologies. In structural biology, the periodic/preferential product ion yield in ECD of α-helical structures potentially opens the way toward de novo site-specific secondary structure determination of peptides and proteins in the gas phase and its correlation with solution-phase structure.     

Amphiphilic graft copolymers with poly(oxyethylene) side chains: Synthesis via phthalimidoacrylate prepolymers

Amphiphilic graft copolymers of definite composition were obtained by grafting of amino-functionalized poly(oxyethylene) monoether (MPEO–NH₂) of M?_n = 750, 2000, and 5000 onto phthalimidoacrylate (PIA) homopolymer or its copolymer with styrene (St). The radical co-polymerization of PIA and phthalimidomethacrylate (PIMA) with St was studied in dimeth-ylformamide (DMF) at 60°C. The copolymer composition curves and the monomer reactivity ratios showed a high tendency of PIA to alternating copolymerization with St (r₁r₂ = 0.006). Hydrogen bonding between the functional groups leads to significant spectral modifications. The micellization of the graft copolymers was studied by GPC in aqueous-methanolic eluent. The aggregation behavior of the graft copolymers depended on their composition and chromato-graphic separation lead to the copolymers fractionation. © 1995 John Wiley & Sons, Inc.     

Functional Analysis of Autoantibody Signatures in Rheumatoid Arthritis

For the identification of antigenic protein biomarkers for rheumatoid arthritis (RA), we conducted IgG profiling on high density protein microarrays. Plasma IgG of 96 human samples (healthy controls, osteoarthritis, seropositive and seronegative RA, n = 24 each) and time-series plasma of a pristane-induced arthritis (PIA) rat model (n = 24 total) were probed on AIT’s 16k protein microarray. To investigate the analogy of underlying disease pathways, differential reactivity analysis was conducted. A total of n = 602 differentially reactive antigens (DIRAGs) at a significance cutoff of p < 0.05 were identified between seropositive and seronegative RA for the human samples. Correlation with the clinical disease activity index revealed an inverse correlation of antibodies against self-proteins found in pathways relevant for antigen presentation and immune regulation. The PIA model showed n = 1291 significant DIRAGs within acute disease. Significant DIRAGs for (I) seropositive, (II) seronegative and (III) PIA were subjected to the Reactome pathway browser which also revealed pathways relevant for antigen presentation and immune regulation; of these, seven overlapping pathways had high significance. We therefore conclude that the PIA model reflects the biological similarities of the disease pathogenesis. Our data show that protein array analysis can elucidate biological differences and pathways relevant in disease as well be a useful additional layer of omics information.     

Vibrational analysis of free and hydrogen bonded complexes of nicotinamide and picolinamide

Harmonic and anharmonic vibrations of free nicotinamide (NIA) and picolinamide (PIA) molecules together with their hydrogen bonded complexes H₂O–NIA and H₂O–PIA have been studied by means of density functional method. The calculation results of the vibrational spectra of free molecules have been investigated and are compared to the available experimental spectra. The vibrational wavenumbers of both molecules have also been calculated by polarizable continuum model (PCM) that represents the solvent as a polarizable continuum and places the solute in a cavity within the solvent (water is chosen as the solvent in this study). The results of PCM calculations and the H₂O–NIA, H₂O–PIA complexes, are used to investigate the H-bonding interactions of both molecules with the water molecule. The harmonic wavenumbers have been scaled by proper factors obtained by comparing the observed versus calculated wavenumbers and it is shown that anharmonic corrections on the vibrational spectra provided a better agreement between the observed and calculated wavenumbers compared to the results obtained by scaling factor method.     

Use of ferrocene scaffolds as pendant groups in hairpin-type pyrrole-imidazole polyamide molecules showing sequence-selective binding to DNA duplexes

[reaction: see text] The synthesis and properties of new conjugate molecules, Fc-PIA, composed of ferrocene (Fc) and pyrrole-imidazole polyamides (PIA) are reported. As a PIA sequence, we chose Im-Py-Im/Py-Im-Py considering its future application to the SNPs detection of genes having a GCG/CGC sequence. Two types of Fc-containing linkers, i.e., ferrocene-1,1'-dicarboxamide and ferrocenecarboxamide, were designed, and several Fc-PIPA molecules having these linkers were synthesized. Titration studies by use of circular dichroism revealed that the carboxamide-type Fc-PIA could bind to the target DNA with an association constant of 10(7) M(-1). In contrast, ferrocene dicarboxamide-type compounds have slightly weaker affinity for the target DNA. However, the affinity could be recovered by replacing one of the pyrrole residues with beta-alanine. We carried out the CV measurement and observed quasi-irreversible oxidation of the ferrocene moieties in the Fc-PIA compounds. These properties of Fc-PIA indicate the potential usefulness of these molecules in electrochemical detection of genes.     

Electron capture dissociation product ion abundances at the X amino acid in RAAAA-X-AAAAK peptides correlate with amino acid polarity and radical stability

We present mechanistic studies aimed at improving the understanding of the product ion formation rules in electron capture dissociation (ECD) of peptides and proteins in Fourier transform ion cyclotron resonance mass spectrometry. In particular, we attempted to quantify the recently reported general correlation of ECD product ion abundance (PIA) with amino acid hydrophobicity. The results obtained on a series of model H-RAAAAXAAAAK-OH peptides confirm a direct correlation of ECD PIA with X amino acid hydrophobicity and polarity. The correlation factor (R) exceeds 0.9 for 12 amino acids (Ile, Val, His, Asn, Asp, Glu, Gln, Ser, Thr, Gly, Cys, and Ala). The deviation of ECD PIA for seven outliers (Pro is not taken into consideration) is explained by their specific radical stabilization properties (Phe, Trp, Tyr, Met, and Leu) and amino acid basicity (Lys, Arg). Phosphorylation of Ser, Thr, and Tyr decreases the efficiency of ECD around phosphorylated residues, as expected. The systematic arrangement of amino acids reported here indicates a possible route toward development of a predictive model for quantitative electron capture/transfer dissociation tandem mass spectrometry, with possible applications in proteomics.     

W-band transient EPR and photoinduced absorption on spin-labeled fullerene derivatives

We investigated by W-band (94 GHz) transient electron paramagnetic resonance (TREPR) and photoinduced absorption (PIA) spectroscopy two fullerene derivatives bearing a nitroxide radical unit. After pulsed laser photoexcitation of the molecules in liquid toluene solution, complex EPR spectra are recorded, with lines in absorption and emission. The intrinsic higher spectral and temporal resolution of the W-band frequency leads to the assignment of all the lines in the spectrum and the determination of the sign and the absolute value of the exchange coupling between the fullerene in its photoexcited triplet state (S(T) = 1) and the radical (S(R) = 1/2). The two compounds with different fullerene-nitroxide spacers show opposite-ferromagnetic and antiferromagnetic-exchange couplings. The time evolution of the spectra and the polarization of the lines are interpreted in terms of several possible spin polarization mechanisms. The EPR measurements are complemented with PIA experiments.     

An Independent 1D Single‐Walled Metal–Organic Nanotube Transformed from a 2D Layer Exhibits Highly Selective and Reversible Sensing of Nitroaromatic Compounds

The syntheses and structures of two new Zn^II complexes, a 2D graphite‐like layer {[Zn(PIA)H₂O] ? H₂O}_n ( 1 ) and an independent 1D single‐walled metal–organic nanotube (SWMONT) {[Zn₂(PIA)₂(bpy)₂] ? 2.5 H₂O ? DMA}_n ( 2 ), have been reported based on a “Y”‐shaped 5‐(pyridine‐4‐yl)isophthalic acid ligand (H₂PIA). Interestingly, the 2D graphite‐like layer in 1 can transform into the independent 1D SWMONT in 2 with addition of 2,2′‐bipyridine (bpy), which represents the first successfully experimental example of an independent 1D metal–organic nanotube generated from a 2D layer by a “rolling‐up” mechanism.     

Effect of montmorillonite content and the type of its modifier on the thermal properties and flammability of polyimideamide nanocomposite fibers

The effects of montmorillonite (MMT) content (1, 3, 5%) and the type of its modifiers on the thermal properties and flammability of PIA nanocomposite fibers have been assessed. Sodium montmorrilonite was modified with aminododecane acid and octadecylamine. Samples of PIA nanocomposite containing commercial MMT: Nanomer PGW from Nanocor were also included in the comparative analysis. It has been found that the glass transition temperature (T _g) of the fibers under investigation depends on the type of MMT’s modifier. On the other hand this parameter does not affect the thermal stability of fibers defined with T ₅ and T ₅₀ indicators since the thermal decomposition of modifiers takes place at lower temperatures.     

Thermal and microbial degradation of alginate-based superabsorbent polymer

In this study, an alginate-based superabsorbent polymer (SAP), alginate-graft-poly[acrylamide-co-(itaconic acid)-g-(acrylic acid)] or Alg-g-P(AM-co-IA-g-AA), was prepared to examine its thermal and microbial degradation properties through Thermogravimetric Analysis (TGA), and soil supernatant test (with and without added nutrient) and soil burial test, respectively. The TGA thermogram of the SAP showed three degradation steps. The first degradation step was due to the thermal degradation of alginate and decomposition of the functional groups of PAM, PIA and PAA; whereas the second degradation step occurred as a result of the decomposition of PAM, PAA and PIA chains. Further decomposition of PIA contributed to the third degradation step. Among all the soil samples [tropical forest soil (TF), former tin mine lake soil (TM), peanut farm soil (PF), indigenous microorganism soil from an organic vegetable farm (OF), and oil palm plantation soil (OP)] tested, OF soil degraded the polymer sample most effectively, with the highest weight loss of 82.6% (with added nutrient) and 82.8% (without added nutrient) in soil supernatant tests, and 63.5% in soil burial test. Morphological observation under an Illuminated Stereo Microscope showed some holes and weak topographical spots on the surface of the polymer material after it had been incubated in OF solution for 40 days. Meanwhile, the intrinsic viscosities, [η], of NaAlg and the Alg-based SAP solutions were 2.62 and 2.75 respectively.     

Steady-state photoinduced absorption of CdSe/CdS octapod shaped nanocrystals

Colloidal branched nanocrystals have been attracting increasing attention due to evidence of an interesting relationship between their complex shape and charge carrier dynamics. Herein, continuous wave photoinduced absorption (CW PIA) measurements of CdSe/CdS octapod-shaped nanocrystals are reported. CW PIA spectra show strong bleaching due to the one-dimensional (1D) CdS pod states (480 nm) and the zero-dimensional (0D) CdSe core states (690 nm). The agreement with previously reported ultrafast pump-probe experiments indicates that this strong bleaching signal may be assigned to state filling. Additional bleaching features at 520 and 560 nm are characterized by a longer lifetime and are thus ascribed to defect states, localized at the pod-core interface of the octapod, showing that some of the initially photogenerated carriers get quickly trapped into these long-lived defect states. However, we remark that a relevant part of electrons remain untrapped: this opens up the opportunity to exploit octapod shaped nanocrystals in photovoltaics applications, as electron acceptor materials, considering that several efficient hole extracting materials are already available for the realization of a composite bulk heterojunction.     

Side chain variations on a series of dicyanovinyl-terthiophenes: a photoinduced absorption study

We characterize a series of dicyanovinyl-terthiophenes with different alkyl side chains. Variations of side chain substitution patterns and length mainly affect the morphology of the evaporated thin films, which in turn sensitively influences properties like absorption, energy levels, and thin film roughness. To investigate changes in transfer processes between electron donor (D) and acceptor (A) molecules due to side chain variations, we use photoinduced absorption spectroscopy (PIA). PIA probes the long-living photoexcited species at the D-A interface: triplet excitons, cations, and anions. For a blend layer of dicyanovinyl-terthiophene and the electron acceptor fullerene C(60), an energy transfer via the singlet and triplet manifold of C(60) occurs. The recombination dynamics of the triplet excitons reveal two components that differ in their lifetime and generation rate by 1 order of magnitude. By comparing the dynamics of triplet excitons in neat and blend layers, we estimate the energy transfer efficiency in dependence of the type of side chain. The compound with methyl side chains shows remarkable properties regarding thin film absorption, surface roughness, and energy transfer efficiency, which we attribute to the specific nanomorphology of the thin film.