Densities and compressibilities of aqueous HCl and NaOH from 0 to 45°C. The effect of pressure on the ionization of water

The densities and sound speeds of aqueous HCl and NaOH solutions were measured from 0.1 to 1.0m and from 0 to 45°C. These data were combined with literature data and fitted to functions of molality and temperature. The apparent molal volumes V and compressibilities K of these solutions were fitted to functions of molality and temperature. The partial molal volumes and compressibilities of HCl and NaOH solutions were used to calculate the partial molal volume V and compressibility changes for the ionization of water. Combined with literature data these values of V adn were used to calculated the effect of pressure on the ionization constant of water K _w from 0 to 200°C. The effect of pressure on K _w calculated from partial molal quantities are in reasonable agreement with that determined directly from high pressure measurements taken from the literature up to 1000 bar. It is necessary to use the pressure dependence of K ⁰ to extend the calculated pressure dependence of K _w up to 6000 bar.     

Thermodynamics of ionization of water over wide ranges of temperature and pressure

We have summarized results of many experimental investigations of the thermodynamics of ionization of H₂O(liq.) from 0–300°C and from 1.0 atm to nearly 8000 atm. Results of these investigations (equilibrium constants, enthalpies of ionization, heat capacities, partial molal volumes, and compressibilities) have been used for a number of thermodynamic calculations. It is particularly noteworthy that it is possible to use thermal data from 0–145°C with an equilibrium constant for 25°C in calculating reasonably accurate equilibrium constants for temperatures as high as 300°C. Similarly, it is possible to use volumetric data that refer to 1.0 atm in calculating useful equilibrium constants that apply for pressures as high as 2000 atm.Much of the work reported here was done while the author was on leave at the University of Lethbridge.     

The effect of pressure on the ionization of boric acid in aqueous solutions from molal-volume data

The apparent, φ _v , and partial, \(\bar V_2 \) molal volumes of dilute (0.02 to 0.7m) aqueous boric acid, B(OH)₃, and sodium borate, NaB(OH)₄, solutions have been determined from 0 to 50° C from precision density measurements. The φ _v of boric acid is a linear function of the first power of concentration. For sodium borate, the Debye-Hückel theoretical limiting law slope for the φ _v as a function of the square root of molar concentration is approached at all temperatures studied. The positive deviations at higher concentrations increase with decreasing temperature. The infinite-dilution volume properties of both B(OH)₃ and NaB(OH)₄ indicate that these solutes behave like “structure breakers” between 0 and 50°C (that is ?²φ _v ^° /?T² is negative). The volume change for the ionization of boric acid in water \(\Delta \bar V^\circ \) , is calculated from the volume data at various temperatures. This volume change has been used to estimate the effect of pressure on the ionization of boric acid solutions from 0 to 50°C and 0 to 1000 bars. The calculated effect of pressure on the ionization is in good agreement with direct measurements.     

Partial molal volumes and compressibilities of carbohydrates in water

The partial molal volumes and isentropic partial molal compressibilities of sugars, sugar alcohols, uronic acids, and some di- and trisaccharides in water have been measured at 25°C. The results suggest that the hydration of carbohydrates depends on the detailed stereochemistry of the solute and the way the solute molecule fits in the water structure. It seemed impossible at this stage to establish any additivity rules for the various functional groups or otherwise systematize the results.     

The influence of pressure on ionization equilibria in aqueous solutions

A comparison is made of the abilities of two simple relationships to describe the influence of pressure on ionization constants in aqueous solutions.     

Determination of eight nitrosamines in water at the ng L levels by liquid chromatography coupled to atmospheric pressure chemical ionization tandem mass spectrometry

In this work, we have developed a sensitive method for detection and quantification of eight N-nitrosamines, N-nitrosodimethylamine (NDMA), N-nitrosomorpholine (NMor), N-nitrosomethylethylamine (NMEA), N-nitrosopirrolidine (NPyr), N-nitrosodiethylamine (NDEA), N-nitrosopiperidine (NPip), N-nitroso-n-dipropylamine (NDPA) and N-nitrosodi-n-butylamine (NDBA) in drinking water. The method is based on liquid chromatography coupled to tandem mass spectrometry, using atmospheric pressure chemical ionization (APCI) in positive mode with a triple quadrupole analyzer (QqQ). The simultaneous acquisition of two MS/MS transitions in selected reaction monitoring mode (SRM) for each compound, together with the evaluation of their relative intensity, allowed the simultaneous quantification and reliable identification in water at ppt levels. Empirical formula of the product ions selected was confirmed by UHPLC-(Q)TOF MS accurate mass measurements from reference standards.Prior to LC–MS/MS QqQ analysis, a preconcentration step by off-line SPE using coconut charcoal EPA 521 cartridges (by passing 500 mL of water sample) was necessary to improve the sensitivity and to meet regulation requirements. For accurate quantification, two isotope labelled nitrosamines (NDMA-d₆ and NDPA-d₁₄) were added as surrogate internal standards to the samples.The optimized method was validated at two concentration levels (10 and 100 ng L⁻¹) in drinking water samples, obtaining satisfactory recoveries (between 90 and 120%) and precision (RSD < 20%). Limits of detection were found to be in the range of 1–8 ng L⁻¹. The described methodology has been applied to different types of water samples: chlorinated from drinking water and wastewater treatment plants (DWTP and WWTP, respectively), wastewaters subjected to ozonation and tap waters.     

The effect of pressure on the dissociation constant of hydrofluoric acid and the association constant of the NaF ion pair at 25°C

The effect of pressure on the dissociation constant of hydrofluoric acid was determined by using the indicator technique at 25°C at an ionic strength of 0.1m over a pressure range of 1 to 2000 atm. A value of 3.14 for pK _a ^* at I =0 was obtained by extrapolation to zero ionic strength at 1 atm. The pressure dependence yielded a partial molar volume change of –9.6 cm³-mol^–1 and a compressibility change of — 35×10^–3 cm³-mol^–1 –atm^–1 for the dissociation. The dependence of ionic strength on the association constant K _A ^* of NaF was studied at 25°C and 1 atm. Extrapolation to I=0 yielded a pK _A ^* of –0.78. The pressure dependence of K _A ^* gave a change of volume of 3.26 cm³-mol^–1 and a change in compressibility of 6×10^–3 cm³-mol^–1-atm^–1 for the formation of the ion pair.     

Document authentication at molecular levels using desorption atmospheric pressure chemical ionization mass spectrometry imaging

Molecular images of documents were obtained by sequentially scanning the surface of the document using desorption atmospheric pressure chemical ionization mass spectrometry (DAPCI‐MS), which was operated in either a gasless, solvent‐free or methanol vapor‐assisted mode. The decay process of the ink used for handwriting was monitored by following the signal intensities recorded by DAPCI‐MS. Handwritings made using four types of inks on four kinds of paper surfaces were tested. By studying the dynamic decay of the inks, DAPCI‐MS imaging differentiated a 10‐min old from two 4 h old samples. Non‐destructive forensic analysis of forged signatures either handwritten or computer‐assisted was achieved according to the difference of the contour in DAPCI images, which was attributed to the strength personalized by different writers. Distinction of the order of writing/stamping on documents and detection of illegal printings were accomplished with a spatial resolution of about 140 µm. A Matlab® written program was developed to facilitate the visualization of the similarity between signature images obtained by DAPCI‐MS. The experimental results show that DAPCI‐MS imaging provides rich information at the molecular level and thus can be used for the reliable document analysis in forensic applications. © 2013 The Authors. Journal of Mass Spectrometry published by John Wiley & Sons, Ltd.     

Comparison of the sensitivity of mass spectrometry atmospheric pressure ionization techniques in the analysis of porphyrinoids

The porphyrinoids chemistry is greatly dependent on the data obtained in mass spectrometry. For this reason, it is essential to determine the range of applicability of mass spectrometry ionization methods. In this study, the sensitivity of three different atmospheric pressure ionization techniques, electrospray ionization, atmospheric pressure chemical ionization and atmospheric pressure photoionization, was tested for several porphyrinods and their metallocomplexes. Electrospray ionization method was shown to be the best ionization technique because of its high sensitivity for derivatives of cyanocobalamin, free‐base corroles and porphyrins. In the case of metallocorroles and metalloporphyrins, atmospheric pressure photoionization with dopant proved to be the most sensitive ionization method. It was also shown that for relatively acidic compounds, particularly for corroles, the negative ion mode provides better sensitivity than the positive ion mode. The results supply a lot of relevant information on the methodology of porphyrinoids analysis carried out by mass spectrometry. The information can be useful in designing future MS or liquid chromatography–MS experiments. Copyright © 2013 John Wiley & Sons, Ltd.     

Liquid chromatography/mass spectrometry in anabolic steroid analysis--optimization and comparison of three ionization techniques: electrospray ionization,atmospheric pressure chemical ionization and atmospheric pressure photoionization

The applicability of liquid chromatography/tandem mass spectrometry (LC/MS/MS) for the detection of the free anabolic steroid fraction in human urine was examined. Electrospray ionization (ESI), atmospheric pressure chemical ionization and atmospheric pressure photoionization methods were optimized regarding eluent composition, ion source parameters and fragmentation. The methods were compared with respect to specificity and detection limit. Although all methods proved suitable, LC/ESI-MS/MS with a methanol-water gradient including 5 mM ammonium acetate and 0.01% acetic acid was found best for the purpose. Multiple reaction monitoring allowed the determination of steroids in urine at low nanogram per milliliter levels. LC/MS/MS exhibited high sensitivity and specificity for the detection of free steroids and may be a suitable technique for screening for the abuse of anabolic steroids in sports.     

The first ionization constant from 25 to 200°C and 2000 bar for orthophosphoric acid

The ionization constant of orthophosphoric acid, determined by conductivity measurements, decreased from 7.11×10^–3 at 25°C to 6.2×10^–4 mol-kg^–1 at 200°C. The pressure effect to 2000 bar was also measured and the ratio K₂₀₀₀/K₁ is 2.7 at 25°C and 3.7 at 200°C. The standard partial molar volume change for the ionization at 1 bar, , changes from –16.1 at 25°C to –33.3 cm³-mol^–1 at 200°C. The partial molar compressibility change for the ionization, , varies from –3.8×10^–3 to –8.3×10^–3 cm³-mol^–1 bar^–1 over the same temperature range.     

The effect of high pressure on the ion pair equilibrium constant of alkali metal fluorides: A spectrophotometric study

Bromophenol blue indicator was used in UV-visible spectrophotometric measurements to study ion association constants of alkali metal fluorides. The equilibrium constants for the ion pair formation of the alkali metal fluorides were determined as a function of ionic strength at one atmosphere pressure and 25°C. The effect of pressure on these association constants was measured at a constant total ionic strength of 1.0 mol-kg^–1 over a pressure range of 1 to 2000 atmospheres at 25°C. The pressure dependences of the stoichiometric association constants of the alkali metal fluorides are given by: lnK _LiF ^* =0.77–2.47×10^–4P–2.12×10^–8P²; lnK _NaF ^* =0.53–1.08×10^–4P–1.66×10^–8P²; lnK _KF ^* =0.24–4.41×10^–5P–7.15×10^–8P²; lnK _RbF ^* =–0.17–8.65×10^–5P–4.51×10^–8P²; and lnK _CsF ^* = –0.37–1.14×10^–4P–6.82×10^–8P², where P is the pressure in atmospheres. The stoichiometric molar volume and compressibility changes for ion pair formation of the alkali metal fluorides were evaluated from the pressure dependence of K _MF ^* data. The thermodynamic association constants were also calculated making use of activity coefficient data from the Pitzer equations. The partial molal volume and compressibility changes for ion pair formation of each alkali metal fluoride are reported.     

Volume and compressibility changes for short poly(ethylene glycol)–water system at various temperatures

 The volume and compressibility changes on mixing of water and poly(ethylene glycol 400) were measured with a vibration densimeter and a sing-around velocimeter over the whole mole fraction at various temperatures. The apparent molar expansibility and compressibility of water were calculated and characterized by distinct maxima and minima, respectively. These results may be attributed to the hydration behavior of the polymer chain. Received: 14 January 1998 Accepted: 7 April 1998     

The ionization of aliphatic dicarboxylic acids in water

Potentiometric, calorimetric, and dilatometric data on the ionization of several saturated dicarboxylic acids in water at 25°C are reported. A correlation is attempted between structure and thermodynamic evidences for the two dissociation stages of the diacids considered, in particular in terms of the propensity toward intramolecular hydrogen bond formation of some singly ionized species.     

Basic rules for the interpretation of atmospheric pressure ionization mass spectra of small molecules

This review summarizes the basic rules for the interpretation of atmospheric pressure ionization (API) mass spectra of small molecules written with the style primarily intended for beginners and low-experienced researchers with the mass spectra interpretation. The first and basic step in any interpretation of mass spectra is always the determination of molecular weight, which is relatively easy in case of soft ionization techniques due to the limited extend of fragmentation and the prevailing presence of (de)protonated molecules in the full scan mass spectra. These [M+H]⁺ and [M−H]⁻ ions are often accompanied by low abundant molecular adducts, which can be used as the supplementary information for the unambiguous determination of molecular weights. In certain cases, adduct ions may dominate the spectra. The subsequent interpretation of full scan and tandem mass spectra is more complicated due to a high number of possible functional groups, structural subunits and their combinations resulting in numerous competitive fragmentation pathways. Typical neutral losses and the effect of individual functional groups on the fragmentation are discussed in detail and illustrated with selected examples. Modern mass analyzers have powerful features for the structural elucidation, for example high resolving power, high mass accuracy, multistage tandem mass spectrometry, dedicated softwares for the interpretation of mass spectra and prediction of their fragmentation. Background information on differences among individual ionization techniques suitable for the HPLC–MS coupling and basic types of mass analyzers with consequences for the data interpretation is briefly discussed as well. Selected examples illustrate that the right optimization of chromatographic separation and the use of other than mass spectrometric detectors can bring valuable complementary information.     

大气压离子化技术/飞行时间质谱联用进展

综述了大气压离子化技术/飞行时间质谱联用技术及其应用的进展     

The effect of water vapour on the cyclodextrin-solute interaction in gas-solid chromatography

The effect of water vapour on the interaction between the solutes and a cyclodextrin was studied chromatographically in a gas/solid system. It has been shown that all the sorbates capable of forming inclusion complexes with -CD are affected by the presence of water, in contrast to the sorbates that do not interact with -CD, which are unaffected. The measurements were carried out with the cyclodextrin deposited on a solid carrier (Chromosorb W) and with water vapour contained in the mobile phase. Some advantages of this system have been demonstrated for an analytical application.Presented at the Fourth International Symposium on Inclusion Phenomena and the Third International Symposium on Cyclodextrins, Lancaster, U.K., 20–25 July 1986.     

Mass spectrometry of N-linked oligosaccharides using atmospheric pressure infrared laser ionization from solution

An atmospheric pressure (AP) infrared (IR) laser ionization technique, implemented on a quadrupole ion trap mass spectrometer, was used to analyze underivatized, N-linked oligosaccharides in solution. Experiments were conducted on an atmospheric pressure infrared ionization from solution (AP-IRIS) ion source which differed from previous AP IR matrix-assisted laser desorption/ionization (MALDI) interfaces in that the ion source operated in the absence of an extraction electric field with a higher power 2.94 microm IR laser. The general term 'IRIS' is used as the mechanism of ionization differs from that of MALDI, and is yet to be fully elucidated. The AP-IRIS ion source demonstrated femtomole-level sensitivity for branched oligosaccharides. AP-IRIS showed approximately 16 times improved sensitivity for oligomannose-6 and the core-fucosylated glycan M3N2F over optimal results obtainable on a AP UV-MALDI with a 2,4,6-trihydroxyacetophenone matrix. Comparison between IR and UV cases also showed less fragmentation in the IR spectrum for a glycan with a conserved trimannosyl core, core-substituted with fucose. A mixture of complex, high-mannose and sialylated glycans resulted in positive ion mass spectra with molecular ion peaks for each sugar. Tandem mass spectrometry of the sodiated molecular ions in a mixture of glycans revealed primarily glycosidic (B, Y) cleavages. The reported results show the practical utility of AP-IRIS while the ionization mechanism is still under investigation.     

Enthalpies of transfer of ubiquinone-0 from water to aqueous surfactant solutions at various temperatures

Mixing and dilution enthalpies of aqueous solutions of 2,3-dimethoxy-5-methyl-1,4-benzoquinone (UQ₀) and of N,N-dimethyl-dodecylamine-N-oxide (DDAO) were measured and used to calculate the enthalpies of transfer δH(W →W +S) of UQ₀ from water to DDAO aqueous solutions at 20‡, 25‡, 30‡, and 35‡C. From the dependence of δH(W →W +S) on surfactant concentration, the distribution constant between aqueous and micellar phases and the standard transfer enthalpy of UQ₀ from water to DDAO micelles were evaluated along with the standard transfer free energy and entropy. The approach used required knowledge of the CMC and micellization enthalpy at each temperature. Thus, the thermodynamics of micellization of DDAO was studied by means of dilution enthalpy measurements at the several temperatures.     

Measurement and modelling of solubility data for bosentan in 1-propanol + water mixtures at various temperatures

ABSTRACT

The experimental solubility determination of bosentan (BST) in 1-propanol + water mixtures within temperature range, T = (293.15–313.15) K were performed by applying the shake-flask method. The solubility data were correlated by four cosolvency models, which are the Jouyban-Acree, Jouyban-Acree-van’t Hoff, modified Wilson, and Yalkowsky equations. The back-calculated solubility using the Jouyban-Acree-van’t Hoff equation presents better compatibility with the experimental data than those by the other models. Thermodynamic properties such as apparent molar enthalpy, entropy, and Gibbs free energy change of BST dissolution process in the binary (1-propanol + water) mixtures were also calculated which indicative of the inspontaneous process of dissolution.