The simultaneous determination of chloride, nitrate and sulphate by isotachophoresis using bromide as a leading ion

A new method has been devised to allow the determination of small inorganic anions using isotachophoresis. This method makes use of indium(III) as a counter ion to manipulate the effective mobilities of inorganic anion species by means of complexation reactions. This new procedure successfully allowed the simultaneous determination of nitrate, chloride and sulphate to be realised on a capillary scale instrument and in a chip-based separation device. The electrolyte system developed to allow the separation to be achieved employed a 10mM bromide-based leading electrolyte containing 1.25 mM indium(III) at pH 3.15 and a terminating electrolyte of cyanoacetic acid.     

Separation and analysis of nitrophenol isomers by capillary isotachophoresis

The separation and quantification of nitrophenol isomers in aqueous solutions by capillary isotachophoresis has been studied. Several electrolyte systems with different leading and terminating ions were used. The separation was carried out in a PTFE column in a device for column-coupling system.     

Photoinduced phase separation

A novel approach of photoinduced phase separation has been demonstrated with a photolabile anionic surfactant, mixed with an inert nonionic surfactant in the presence of salting-out electrolyte. Breakdown of the photolyzable surfactant results in hydrophobic photoproducts, which are emulsified by the remaining inert surfactant; added electrolyte resolves the emulsion into macroscopic oily and aqueous phases. The initial micellar systems can disperse an insoluble additive marker dye (shown), which may be spatially segregated from the aqueous environment by the action of UV light.     

Isotachophoresis of beta-blockers in a capillary and on a poly(methyl methacrylate) chip

Analysis of the beta-blockers oxprenolol, atenolol, timolol, propranolol, metoprolol, and acebutolol in human urine by a combination of isotachophoresis (ITP) and zone electrophoresis (ZE) was investigated. Methods were developed with a conventional capillary electrophoresis (CE) apparatus and a poly(methyl methacrylate) (PMMA) microchip system. With CE the separation of oxprenolol, atenolol, timolol, and acebutolol from a standard solution containing 5 microg/mL of each compound was accomplished by performing ZE with transient ITP. The electrolyte system consisted of 10 mM sodium morpholinoethane sulfonate (pH 5.5) and 0.1% methylhydroxyethylcellulose as the leading electrolyte and 30 mM ortho-phosphoric acid (pH 2.0) as both the terminating and the ZE background electrolyte. With the microchip system the separation of oxprenolol and acebutolol from a standard solution containing 10 microg/mL of each compound was accomplished by a coupled-channel ITP-ZE device using the same leading electrolyte solution as the CE system but 5 mM glutamic acid (pH 3.4) as terminating and background electrolytes. The systems were used for analyses of patient urine samples. Water-soluble hydrophilic matrix compounds were removed from the urine samples by solid-phase extraction (SPE). Limits of quantification below 5 microg/mL could be achieved. The PMMA ITP-ZE chip has not earlier been used for analyses of any drugs from urine samples.     

Quasi-solid-state dye-sensitized solar cell based on a polymer gel electrolyte with in situ synthesized ionic conductors

A polymer gel electrolyte with in situ synthesized Acac-Py-I₂ ionic conductors was prepared for fabricating a quasi-solid-state dye-sensitized solar cell (QS-DSSC). The in situ synthesized Acac-Py-I₂ ionic conductors show weaker influence on the liquid electrolyte absorbency of the polymer gel electrolyte than that of Acac-Py-I₂ ionic conductors dissolved in liquid electrolyte. Owing to the higher liquid electrolyte absorbency, the polymer gel electrolyte with in situ synthesized Acac-Py-I₂ ionic conductors shows higher ionic conductivity than that of polymer gel electrolyte with Acac-Py-I₂ ionic conductors absorbed from liquid electrolyte. QS-DSSC containing the polymer gel electrolyte with in situ synthesized Acac-Py-I₂ ionic conductors shows 3.815% energy conversion efficiency, which is 21.6% higher than that of QS-DSSC containing polymer gel electrolyte with Acac-Py-I₂ ionic conductors absorbed from liquid electrolyte.     

Determination of organic acids in tobacco by capillary isotachophoresis

Nine organic acids and phosphate have been separated and quantified in tobacco by capillary isotachophoresis. Two operating systems for the separation were found: hydrochloric acid (10 mmol l(-1)) adjusted with beta-alanine to pH 2.9 plus 0.1% poly(vinylpyrrolidone) was used as the leading electrolyte and 10 mmol l(-1) nicotinic acid as the terminating electrolyte and hydrochloric acid (10 mmol l(-1)) including 5.5 mmol l(-1) 1,3-bis[tris(hydroxymethyl)methylamino]propane plus 0.1% poly(vinylpyrrolidone) was used as the leading electrolyte and 5 mmol l(-1) 2-morpholinoethanesulfonic acid as the terminating electrolyte. Linearity was observed from 0.008 to 0.100 mmol l(-1) with a coefficient of determination (r2) of 0.999. The separation of anions was achieved in less than 16 min. The minimal sample pretreatment and relatively low running cost make isotachophoresis a good alternative to existing methods.     

Electrochemical redox reaction in a silica sol-gel glass with embedded organic electrolyte

The electrochemical redox reaction of ferrocene was studied in silica sol-gel glass with embedded organic electrolyte. This material has been prepared by mixing hydrolysed tetramethylorthosilicate sol with propylene carbonate LiClO₄ solution containing ferrocene and further gelation in a form of block or film. The electrochemical behaviour of encapsulated ferrocene was studied by cyclic voltammetry, chronoamperometry, differential pulse voltammetry and impedance spectroscopy on ultramicroelectrodes. The shape of the cyclic voltammograms corresponding to the electrooxidation of ferrocene in sol-gel block is similar to that obtained in liquid electrolyte and it does not depend on gel aging. The current substantially decreases during the first few days after gelation. Later it becomes weakly dependent on aging and the apparent diffusion coefficient of ferrocene in the gel block is about half of that in liquid electrolyte. The electrooxidation of ferrocene also occurs in film of the analogous sol-gel material cast on the surface of the electrode assembly.     

Study of the role of ceramic filler in composite gel electrolytes based on microporous polymer membranes

The presented contribution aims at reconsidering the role of filler in affecting the ionic transport in composite gel electrolytes for Li-ion cells based on microporous polymer membranes. The gels have been prepared by swelling thin PVdF/HFP membranes either with conventional liquid electrolyte or with pure propylene carbonate solvent. The membranes contained dispersed submicron-size modified silica filler added in a wide range of weight ratios. The effect of filler content on the kinetics of liquid phase absorption and evaporation from the composite membranes, as well as on the conductivity of the corresponding gel electrolytes, has been studied and discussed in terms of the “colloidal” and “soggy sand” electrolyte concepts. It has been found that conductivity increase of composite gels is not directly correlated with the liquid electrolyte uptake. On this basis it is concluded that important part of ionic transport in this type of composite gel polymer electrolytes is realized on the filler grain boundaries, through overlapping space charge layers of the silica grains.     

Diffusive solvent dynamics in a polymer gel electrolyte studied by quasielastic neutron scattering

A quasielastic neutron scattering study has been performed on a polymer gel electrolyte consisting of lithium perchlorate dissolved in ethylene carbonate/propylene carbonate and stabilized with poly(methyl methacrylate). The dynamics of the solvent, which is crucial for the ion conduction in this system, was probed using the hydrogen/deuterium contrast variation method with nondeuterated solvent and a deuterated polymer matrix. Two relaxation processes of the solvent were studied in the 10-400 microeV range at different temperatures. From analysis of the momentum transfer dependence of the processes we conclude that the faster process ( approximately 100 microeV) is related to rotational diffusion of the solvent and the slower process ( approximately 10 microeV) to translational diffusion of the solvent. The translational diffusion is found to be similar to the diffusion in the corresponding liquid electrolyte at short distances, but geometrically constrained by the polymer matrix at distances beyond approximately 5 A. The study indicates that the hindered diffusion of the solvent on a length scale of the polymer network interchain distance ( approximately 5-20 A) is sufficient to explain the reduced macroscopic diffusivity and ion conductivity of the gel electrolyte compared to the liquid electrolyte.     

Improving the performance of all-solid-state supercapacitors by modifying ionic liquid gel electrolytes with graphene nanosheets prepared by arc-discharge

Ionic liquid gel polymers have widely been used as the electrolytes in all-solid-state supercapacitors, but they suffer from low ionic conductivity and poor electrochemical performance. Arc discharge is a fast, low-cost and scalable method to prepare multi-layered graphene nanosheets, and as-made graphene nanosheets （denoted as ad-GNSs） with few defects, high electrical conductivity and high thermal stability should be favorable conductive additive materials. Here, a novel ionic liquid gel polymer electrolyte based on an ionic liquid （EM1MNTF2） and an copolymer （P（VDF-HFP）） was modified by the addition of ad-GNSs as an ionic conducting promoter. This modified gel electrolyte shows excellent thermal stability up to 400 ℃ and a wide electrochemical window of 3 V. An all-solid-state supercapacitor based on commercial activated carbon was fabricated using this modified ionic liquid gel polymer electrolyte, which shows obviously improved electrochemical behaviors compared with those of the corresponding all-solid-state supercapacitor using pure ionic liquid gel polymer electrolyte. Specially, smaller internal resistance, higher specific capacitance, better rate performance and cycling stability are achieved. These results indicate that the ionic liquid gel polymers modified by ad-GNSs would be promising and suitable gel electrolytes for high performance all-solid-state electrochemical devices.     

新型质子离子液体/硅凝胶电解质的制备及其性能

采用一步溶胶-凝胶法首次将质子型离子液体固定于纳米多孔硅骨架中,合成了表面光滑、柔软、透明的质子增强型固态复合凝胶电解质.研究表明,该凝胶电解质结合了无机硅骨架和质子离子液体的双重优点,具有高的热稳定性（〉300℃）、宽的电化学稳定窗口（〉2.8V）和优异的中低温导电性（11.25×10？3Scm？1,80℃）.可望作为一种新型固态电解质应用于先进储能器件.     

Fabrication and evaluation of a polymer Li-ion battery with microporous gel electrolyte

This paper introduces an easy method for the fabrication of polymer Li-ion batteries with microporous gel electrolyte (MGE). The MGE is a multiphase electrolyte, which is composed of liquid electrolyte, gel electrolyte, and polymer matrix. The MGE not only has high ionic conductivity and good adhesion to the electrodes at low temperatures, but also retains good mechanical strength at elevated temperatures. Therefore, the MGE batteries are able to operate over a wide temperature range. During battery fabrication, the MGE is formed in situ by introducing liquid electrolyte into a swellable microporous polymer membrane and then heating or cycling the battery. In this work, the chemical compatibility of MGE with metal lithium during 60 °C storage and with LiMn₂O₄ cathode during cycling was studied. In addition, graphite/MGE/LiMn₂O₄ Li-ion batteries were made and evaluated.     

Gel Polymer Electrolytes with Talc as a Natural Mineral Filler and a Biodegradable Polymer Matrix in Sodium-Ion Batteries

A gel polymer electrolyte based on poly(vinyl alcohol) (PVA) is used in sodium-ion batteries (SIBs). The use of biodegradable and water-soluble polymer potentially reduces the negative environmental impact. The other components include sodium salt (NaPF₆), sulfolane (TMS) as a plasticizer and talc. For the first time, natural and abundant talc has been used as an inert filler in a gel polymer electrolyte. The best results were obtained for moderate amounts of filler (1 and 3 wt%). Then, an increase in the conductivity, transference numbers, and thermal stability of the membranes was observed. Moreover, the presence of talc had a positive effect on the cyclability of the hard carbon electrode. The discharge capacity after 50 cycles of HC|1 % T_TMS|Na and HC|3 % T_TMS|Na was 243 and 225 mAh g⁻¹, respectively. The use of talc in gel polymer electrolytes containing sodium ions improves the safety and efficiency of SIBs.     

Electrodeposition and stripping of zinc from an ionic liquid polymer gel electrolyte for rechargeable zinc-based batteries

In this paper, we report on zinc deposition and stripping in an ionic liquid polymer gel electrolyte on gold and copper substrates, respectively. The ionic liquid-based polymer gel electrolyte is prepared by combining the ionic liquid 1-butyl-1-methylpyrrolidinium trifluoromethylsulfonate ([Py_1,4]TfO), with Zn(TfO)₂ and poly(vinylidene fluoride-co-hexafluoropropylene) (PVdF-HFP). The ionic liquid polymer gel electrolyte exhibits good conductivity (2.2 mS cm^?1) and good mechanical stability. Zinc deposition and stripping in the ionic liquid polymer gel electrolyte were studied by cyclic voltammetry, potentiostatic, and galvanostatic cycling (charging/discharging) experiments. The gel electrolyte exhibits a promising electrochemical stability and allows a quasi-reversible zinc deposition/stripping. The morphology of the zinc deposits after 10 cycles of zinc deposition/stripping is compact and dense, and deposits without any dendrite formation can be obtained. The quasi-reversibility of the electrochemical deposition/stripping of zinc in this ionic liquid polymer gel electrolyte is of interest for rechargeable zinc-based batteries.     

Effect of single-wall carbon nanotubes on the properties of polymeric gel electrolyte dye-sensitized solar cells

A hybrid of polymer/dispersed single-wall carbon nanotubes was utilized in networking a novel composition of gel electrolyte in dye-sensitized solar cells. The gel is composed of polyethylene glycol, polyvinyl pyrrolidone, single-wall carbon nanotubes, and I^?/I₃ ^? as electrolyte. Formation of the less conductive polyiodide species in electrolyte was prohibited by the addition of single-wall carbon nanotubes leading to the excellent photovoltaic behavior of the cell under simulated standard illumination of the fabricated device owing to the increased open circuit voltage (0.47 V). Electrochemical impedance spectroscopy was employed to quantify the charge transport resistance and the electron lifetime at the TiO₂ conduction band. Charge transport resistances at the TiO₂/dye/electrolyte interface were determined for the cells consisting of the non-gel reference and our new gel electrolytes, and it was indicated that the charge recombination between injected electrons and electron acceptors (I₃ ^?) in the redox electrolyte was remarkably retarded. Electrochemical parameters obtained by the fitting showed all of the resistances increased as compared to liquid electrolyte dye-sensitized solar cells that can be related to the increase in viscosity of the gel, which hinders the ionic transportation through the electrolyte. These results were also confirmed by the electron lifetime analyses. The characteristic peak shifted to a lower frequency in the Bode phase plot for the cell containing gel electrolyte which is an indication of a longer electron lifetime in comparison with that of the cell containing very conventional liquid electrolyte.     

Miniaturised isotachophoresis of DNA

This paper presents the findings of a feasibility study investigating the behaviour of DNA under conditions of miniaturised isotachophoresis. An electrolyte system comprising a leading electrolyte of 5mM perchloric acid at pH 6.0 and a terminating electrolyte of 10mM gallic acid was devised and used to perform isotachophoresis of DNA containing samples on a miniaturised poly(methyl methacrylate) device. Under such conditions it was found that no separation of DNA fragments was observed with the substance migrating instead as a single isotachophoretic zone. Whilst such a result shows the method is unsuitable for analysis DNA it offers significant potential as a means of sample preparation for subsequent analysis using another method. This is because the single zone of DNA formed is preconcentrated to a constant concentration governed by the leading ion and is separated from all species with different effective electrophoretic mobilities.     

利用瞬间等速电泳的毛细管区带电泳大体积电动进样的研究

采用添加乙腈引发的场放大进样与瞬间等速电泳结合的预富集方法,实现了在毛细管内大体积高盐样品中阳离子的有效富集与分离。详细讨论了影响富集的缓冲体系、尾随离子种类、毛细管有效长度、进样时间和等速电泳时间等重要因素。选择在400 mmol/L LiAc-HAc缓冲液(pH 4.5)和400 mmol/L　β-丙氨酸-HAc尾随液(pH 4.5)及10 kV下样品和尾随溶液电动注入时间分别为270和90 s的条件下对高盐溶液中两种结构相近的药物普萘洛尔和美托洛尔进行了富集和分离。该方法富集倍数约为常规电动进样的280倍,普萘洛尔和美托洛尔的检出限分别为2×10-3和8×10-3 mg/L。     

P(VDF-HFP)基凝胶电解质染料敏化纳米TiO2薄膜太阳电池

采用循环伏安法(CV)研究了凝胶电解质中I₃-/I-氧化还原行为,凝胶电解质中I₃-/I-的表观扩散系数和相应的稳态扩散电流明显低于液体电解质.通过对阴/阳离子的结合能和孔穴阻塞作用的研究解释了凝胶电解质电导率较液体电解质发生变化的原因.制备的凝胶电解质电池具有较高的光电转换效率(6.6%),其短路电流密度(Jsc)仅比液体电解质电池低0.3-0.4 mA/cm²,电池效率也仅低约0.6%.     

Amperometric ion sensors based on laser-patterned composite polymer membranes

A polymer membrane for the selective amperometric transfer and sensing of molecular ions has been designed and characterised. The membrane was formed from two polymer layers, a supporting film of polyethylene terephthalate on which an electrolyte film containing polyvinylchloride is cast. The polyester layer has a laser-etched pattern of circular micro-holes in one region. These hole structures are arranged in a rectangular geometry and measure 22 μm in diameter with separation distances of 105 μm and 120 μm. The polyvinylchloride underlayer is a composite system comprised of a 2-nitrophenyl octyl ether plasticising solution containing an electrolytic salt of tetrabutylammonium tetrakts-(4-chlorophenyl)borate. In this way, an array of micro-interfaces between an analyte solution and a PVC gel electrolyte is formed and used as a liquid|liquid interface for the amperometric monitoring of ion transfer reactions. The membrane was characterised in terms of the voltammetric response to choline transfer. The study includes an examination of the fabrication methodology, materials composition and membrane structure.     

A High‐Energy‐Density Potassium Battery with a Polymer‐Gel Electrolyte and a Polyaniline Cathode

A safe, rechargeable potassium battery of high energy density and excellent cycling stability has been developed. The anion component of the electrolyte salt is inserted into a polyaniline cathode upon charging and extracted from it during discharging while the K⁺ ion of the KPF₆ salt is plated/stripped on the potassium‐metal anode. The use of a p‐type polymer cathode increases the cell voltage. By replacing the organic‐liquid electrolyte in a glass‐fiber separator with a polymer‐gel electrolyte of cross‐linked poly(methyl methacrylate), a dendrite‐free potassium anode can be plated/stripped, and the electrode/electrolyte interface is stabilized. The potassium anode wets the polymer, and the cross‐linked architecture provides small pores of adjustable sizes to stabilize a solid‐electrolyte interphase formed at the anode/electrolyte interface. This alternative electrolyte/cathode strategy offers a promising new approach to low‐cost potassium batteries for the stationary storage of electric power.