Chemical effects on K and L shell production cross sections and transfer probabilities in Nb compounds

In this study, the chemical effects on σ_Ki (i = α, β), σ_Lα cross sections, K_β/K_α X-ray intensity ratios and vacancy transfer probabilities from K to L (η _KL) for pure Nb and Nb compounds were investigated. The samples were excited by 59.5 keV γ-rays from ²⁴¹Am and 5.96 keV photon energy from a ⁵⁵Fe annular radioactive sources. K and L X-rays emitted by samples were counted by an Ultra-LEGe detector with a resolution of 150 eV at 5.9 keV. While it was observed that the chemical bonding had an effect on the σ_Kβ, σ_Lα cross sections and K_β/K_α X-ray intensity ratios for compounds, it was almost negligible for σ_Kα cross section because K_α transitions (2P_3/2,1/2→1S_1/2) occurred in inner shells. It is well known that interactions between central element atom and ligands come into existence in valence state, so outer energy levels are sensitive to the chemical environment. The experimental values of σ_Kα cross section and η _KL are in good agreement with theoretically calculated and other experimental values of pure niobium, but the experimental values of the σ_Kβ, σ_Lα cross sections and K_β/K_α X-ray intensity ratios have differences for some compounds because valence electrons have different bond distances and binding energies in different compounds.     

Chemical effect on L X-ray fluorescence cross-sections of Hg,Pb and Bi compounds

Chemical effect on the photon induced L X-ray fluorescence cross-sections (σ_Lα, σ_Lβ and σ_Lγ) for Hg, Pb and Bi compounds were investigated. The samples were excited by gamma rays with energy 59.5 keV from ²⁴¹Am radioisotope source. L X-rays emitted by samples were counted by a Si(Li) detector with resolution 160 eV at 5.9 keV. We observed chemical effect on the photon induced L X-ray fluorescence cross-sections (σ_Lα, σ_Lβ and σ_Lγ) for Hg, Pb and Bi compounds. Our values were compared with calculated theoretical values.     

Measurement of L x-ray production cross sections by 60 keV photons and average L shell fluorescence yields of lanthanides

L x-ray production cross sections have been measured for lanthanides with 60 keV. The measured L x-ray production cross section values for the lanthanides are in good agreement with the theoretical ones evaluated using L _i subshell fluorescence yields ω_i, Coster-Kronig transition probabilities ? _ij based on the Relativistic-Hartree-Slater theory, K to L _i subshell vacancy transfer probabilities n _KLi, fractions of the ratiative width of the subshell F _ny and L _i subshell photoionisation cross section σ_Pi. The average L shell fluorescence yields ω_L have also been derived using the presently measured total L x-ray production cross section values and the theoretical K to L shell vacancy transfer probabilities. These results are compared with theoretically predicted values.     

Chemical effects on Lγ1/Lβ1 X-ray intensity ratio of molybdenum compounds

Chemical effects on the intensity ratio of LX-ray of molybdenum compounds irradiated by 11-keV electrons and by 3-MeV protons were studied using an X-ray crystal spectrometer. It was found that the intensity ratios of L₁/L₁ markedly decrease with increase of ionicity of molybdenum compounds. An exception was for the case of metallic molybdenum.     

Medium effects on fluorescence quantum yields and lifetimes for coumarin laser dyes

Fluorescence quantum yields and lifetimes of coumarin dyes are sharply reduced in polar solvents if amine substituent groups are free to rotate. The polar solvent effect is interpreted in terms of relaxation of excited dye from an initial planar conformation to a twisted zwitterionic state.     

Measurement of K shell fluorescence cross sections and K shell fluorescence yields for the atomic region 22≤Z≤64 by 59.5 keV photons

A new method has been developed to determine K shell fluorescence cross section and K shell fluorescence yields. This method is based on simultaneous measurement of fluorescence radiation and scattered radiation, thus avoiding problems with measuring the source strength and source-to-detector solid angle. The K shell fluorescence cross section and K shell fluorescence yield for 21 elements in the atomic range 22£Z£64 have been measured by using a Si(Li) detector. The obtained results are compared with the other experimental, theoretical and fit values.     

Variation of the L X-ray fluorescence cross-sections, intensity ratios and fluorescence yields of Sm and Eu in halogen compounds

The chemical effect on the L_i (i=ι, α, β, β₁, β₂, γ) X-ray fluorescence cross-sections, the L X-ray intensity ratios and the average L shell fluorescence yields of Sm and Eu binary compounds with halogen (F, Cl and Br) were investigated. The samples were excited by 59.543 keV photons emitted from an Am-241 radioisotope source. X-rays emitted from the samples were counted by means of a Si(Li) detector, which has a resolution 155 eV at 5.9 keV. The experimental values were compared with the calculated theoretical values     

L X-ray production cross sections, average L shell fluorescence yield and intensity ratios in heavy elements

L X-ray fluorescence cross sections, and intensity ratios were measured for elements in the 70￡Z￡92 atomic range at the excitation energy 59.5 keV using a Si(Li) detector. Furthermore, L X-ray fluorescence cross sections and intensity ratios were calculated for elements in the same range. The average L shell fluorescence yields were derived using experimental L X-ray fluorescence cross sections and theoretical photoionization cross sections. The obtained results were compared with other experimental and theoretical values. This revised version was published online in August 2006 with corrections to the Cover Date.     

Chemical hydrogenation of La(Fe,Si) family of intermetallic compounds

In the present work, the chemical hydrogenation process of La(Fe,Si)₁₃ compounds has been shown. It was found, that the La(Fe,Si) compound can be easily saturated with hydrogen by performing reaction with 0.6 M hydrochloric acid (HCl) for 2 h. After reaction, the heat treatment process is necessary to make hydrogenated powder homogenous. For the LaFe_11.8Si_1.2 micronized (<50 μm) and hydrogenated powder, the strength of the magnetocaloric effect was estimated by means of magnetocalorimetric measurements on plates consolidated with PVDF thermoplastic polymer. Magnetic entropy change was calculated by use of magnetization data acquired at magnetic fields with induction up to 2T. The adiabatic temperature change is equal to 3 K in magnetic field change 0–1.7T at 335 K, while magnetic entropy change is equal 13 J/kg*K at 2T. The structural homogeneity of initial and hydrogenated powders was validated by powder X-ray diffraction method. The amount of hydrogen in the hydrogenated compounds was evaluated using thermogravimetry method (4 H atoms per formula unit LaFe_11.8Si_1.2).     

Chemical reactivities of the cation and anion of M@C82 (M = Y, La, and Ce)

The chemical reduction and oxidation of M@C82 (M = Y, La, and Ce) afford the corresponding anion and cation, respectively, which show unique and interesting chemical reactivities. It is found that the successful reversible gain or loss of electrons by ionization is useful for controlling the stability and reactivity of M@C82 toward both nucleophiles and electrophiles.     

The investigations on K and L X-ray fluorescence parameters of gold compounds

The study aimed to determine the chemical effects on the K and L X-ray intensity ratios and the K and L X-ray production cross sections for gold compounds. The K shell fluorescence yields and L shell average yields were also investigated. The samples were excited by 59.5 keV γ-rays from an ²⁴¹Am annular radioactive source and 123.6 keV γ-rays from a ⁵⁷Co annular radioactive source. K and L X-rays emitted from samples were counted by an Ultra-LEGe detector with a resolution of 0.150 keV at 5.9 keV. The experimental values were compared with theoretical, the semi-empirical and other experimental values.     

X-ray fluorescence determination of La,Ce, Pr,Nd, and Sm in industrial sediments of calcium sulfate using linear regression analysis

Industrial sediments of calcium sulfate semihydrate obtained from industrial extraction phosphoric acid and containing 0.3–4.5 wt % of impurity La?Sm are investigated by energy-dispersive X-ray fluorescence analysis (XRFA) and a procedure for the quantitative determination of cerium lanthanides in the sediments is developed. The use of linear regression analysis of X-ray fluorescence spectra of multielement industrial samples and models of individual compounds NaLn(SO₄)₂ · H₂O (cp grade) allowed us to resolve overlaps of spectral L-series lines for La–Sm, eliminate the background, and perform the regression assessment of line intensities of these elements. On this basis, we developed a procedure for the determination of La, Ce, Pr, Nd, and Sm in CaSO₄ · 0.5H₂O sediments with limits of detection (wt %): 0.022, 0.013, 0.011, 0.008, and 0.008, respectively. In concentration ranges (wt %) La (0.05–0.99), Ce (0.1–4.9), Pr (0.005–0.49), Nd (0.02–0.99), and Sm (0.005-0.19), the relative standard deviation RSD (n = 10, P = 0.95) was 18?27, 9?18, 20?31, 17?26, and 19?31%, respectively. A comparison of the results of XRFA with the data of inductively coupled plasma mass spectrometry confirms the accuracy of the results obtained according to OST (Branch Standard) 41-08-221-04.     

Photocatalytic Studies of La,Ce Co-Doped ZnO Nanoparticles

Russian Journal of Applied Chemistry - Zinc oxide nanoparticles were co-doped with varying concentrations of lanthanum (La) and cerium (Ce) ions using co-precipitation method. The resulting powders...     

制备方法对镧钡共改性氧化铝性能的影响

The effect of preparation method on the properties of alumina modified by La₂O₃ and BaO was investigated by means of Low temperature nitrogen adsorption-desorption, NH₃-TPD, NO-TPD and XRD. The results show that alumina prepared by peptizing method exhibits the best textural properties, alumina obtained by co-precipitation method presents the strongest surface acidity and alumina derived from impregnation method shows the best ability of NO adsorption. After calcination at 1 100 ℃, all alumina except that from impregnation method have excellent thermal stability. When the specific surface area and pore volume of alumina are large enough, the activity of catalyst Pd/alumina is affected primarily by the surface acidity of alumina.     

Chemical bonding and properties of "layered" quaternary antimonide oxide REOZnSb (RE = La, Ce, Pr, Nd)

An efficient route to construct a three-dimensional crystal structure is stacking of two-dimensional building blocks (2D-BBs). The crystal structures of potential thermoelectric compounds REOZnSb (RE = La, Ce, Pr, Nd) were virtually constructed from insulating [REO] and conducting [ZnSb] layers. Further optimizations performed by means of first-principles calculations show that REOZnSb should exhibit semimetal or narrow band-gap semiconductor behaviors, which is a prerequisite for high thermoelectric efficiency. The analysis of the electron localizability indicator for LaOZnSb reveals mostly covalent polar interactions between all four kinds of atoms. The electron density yields completely balanced ionic-like electronic formula La(1.7+)O(1.2-)Zn(0.4+)Sb(0.9-). Furthermore, the samples of REOZnSb have been synthesized via solid-state reaction, and their crystal structures were confirmed by powder X-ray diffraction. The differences in cell parameters between the theoretically optimized and the experimental values are smaller than 2%. The temperature dependence of the magnetic susceptibility shows that LaOZnSb is diamagnetic above 40 K, whereas CeOZnSb, PrOZnSb and NdOZnSb are Curie-Weiss-type paramagnets. Electrical conductivity and Seebeck effect measurements indicate that REOZnSb are p-type semiconductors. A considerably high Seebeck coefficient and low thermal conductivity were obtained for pure LaOZnSb, but its low electrical conductivity leads to a small ZT. The high adjustability of the crystal structure as well as properties by optimization of the chemical composition in the compounds REOZnSb provide good prospects for achieving high thermoelectric efficiency.     

Calorimetric, photometric and lifetime determinations of fluorescence yields of fluorescein dyes

Abstract— The fluorescence yields and lifetimes of fluorescein and nine brominated derivatives in basic ethanol are reported. Calorimetric. photometric, and lifetime methods are used independently to measure the yields. A new and simple calorimetric method is presented for this purpose, and the accuracy of the techniques is assessed. There is good agreement between the calorimetric and photometric results. The importance of parameters such as purity, pH, and fluoresence reabsorption is illustrated. The theoretical determination of the natural radiative lifetime from the absorption spectrum is shown to have inherent ambiguities, so that only calorimetric methods provide a reliable, independent check for photometric yield measurements.