Synthesis of S‐Aryl Arenethiosulfonates from N,N‐Di(arenesulfonyl)hydrazines: Reduction of Sulfonyl Chlorides with an Organic Reagent

N,N‐Di(arenesulfonyl)‐N′,N′‐dimethyl‐hydrazines, readily prepared from arenesulfonyl chlorides and N,N‐dimethylhydrazine, were heated at 120°C in chlorobenzene to give S‐aryl arenethiosulfonates, ArSSO₂Ar, in good yields.     

Effect of substituents in the ring on the structure and electron density distribution in benzyl halides

The results of calculations for benzyl chlorides and benzyl bromides that contain substituents in the ring by different quantum-chemical methods are compared. The electron density on the benzyl carbon atom increases as the electron-withdrawing properties of substituents are enhanced due to the shift of the electron density from the benzyl halogen atom to the adjacent carbon atom. A topological analysis according to Bader confirmed the main reason for the change in the paramagnetic shielding of the benzyl¹³C nuclei. The results of calculations provide, for the first time, an explanation for the resonance upfield¹³C shift of this atom as the Hammett constant of a substituent increases in compounds of the series under consideration. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2111–2119, December, 1997.     

Kinetics and mechanism of the reaction of substituted benzyl bromides with copper in dimethylformamide

The reaction of copper metal with various substituted benzyl bromides in dimethylformamide has been studied and the kinetic and thermodynamic parameters of the reaction have been obtained. Hammett plots of log(k/k°) vs the substituent constant σ gave good correlations (ρ = 0.24, S_ρ = 0.03, r = 0.951). The structure of the organic group has little effect on the rate of reaction of substituted benzyl bromides with copper. In the absence of atmospheric oxygen, oxidative dissolution of copper occurred by the mechanism of single‐electron transfer with the formation of 1,2‐diphenylethanes and copper(I) complexes. The stereochemistry and intermediate compound were also studied and the reaction mechanism is discussed. Copyright © 2005 John Wiley & Sons, Ltd.     

Mutual Effect of Functional Groups and the Radical Center on the Reactivity of Nitroxyl Radicals

This review considers the correlation between the reactivity of nitroxyl radicals (piperidine, pyrroline, pyrrolidine, imidazoline, dihydroquinoline, tetrahydroquinoline, diphenyl nitroxide, etc.) and their chemical structure in terms of the rate constants of reactions between these radicals and hydrazobenzene. 4,4′-Di(tert-butyl)diphenyl nitroxyl has the highest reactivity, and the nitroxyl radical of benzoindolopyrrolidine is the least reactive (the difference is a factor of ∼10⁴). The effects of the metal atom in stable organometallic nitroxyl radicals and of the halogen atom in halogenated nitroxyl radicals on the reactivity of the nitroxyl center are considered. Data on the effect of the nitroxyl center on the reactivity of functional groups in the piperidine nitroxyl radical are generalized. Nitroxyl radicals with an activated double bond are shown by quantum chemical calculations to form cyclic transition complexes with amines, involving both the paramagnetic center and a double bond. This explains why the activated double bond in nitroxyl radicals is more reactive in nucleophilic additions of amines than the same bond in their diamagnetic analogues. The rate constants of nitroxyl reduction with hydrazobenzene and of nitroxyl oxidation with tetranitromethane are related to the σ_ESR constant derived from isotropic hyperfine coupling constants HFC_(aN), and their correlation with Hammett constants is demonstrated. The role of solvents in the reduction and oxidation of the nitroxyl radicals is considered. The influence of hydroxyl radical-polar solvent complexes and hydroxylamine-polar solvent H complexes on the course of reactions is considered for hydrogen atom transfer in systems of a sterically hindered nitroxyl radical and hydroxylamine.__________Translated from Kinetika i Kataliz, Vol. 46, No. 4, 2005, pp. 506–528.Original Russian Text Copyright © 2005 by Malievskii, Shapiro.     

Accelerated iterative strategy for the divergent synthesis of dendritic macromolecules using a combination of living radical polymerization and an irreversible terminator multifunctional initiator

Our laboratory has reported the elaboration of an iterative strategy for the synthesis of dendritic macromolecules from conventional monomers. This synthetic method involves a combination of self‐regulated metal‐catalyzed living radical polymerization initiated from arenesulfonyl chlorides and an irreversible terminator multifunctional initiator (TERMINI). The previous TERMINI, (1,1‐dimethylethyl)[[1‐[3,5‐bis(S‐phenyl‐4‐N,N′ diethylthiocarbamate)phenyl]ethenyl]oxy]dimethylsilane, was prepared in nine reaction steps. The replacement of the previous TERMINI with one that requires only three steps for its synthesis, diethylthiocarbamic acid S‐{3‐[1‐(tert‐butyl‐dimethyl‐silanyloxy)‐vinyl]‐5‐diethylcarbamoylsulfanyl‐phenyl} ester, and the use of the more reactive Cu₂S/2,2′‐bipyridine rather than the Cu₂O/2,2′‐bipyridine self‐regulated catalyst have generated an accelerated method for the synthesis of dendritic macromolecules. This method provides rational design strategies for the synthesis of dendritic macromolecules with different compaction by the use of a single monomer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4894–4906, 2005     

Isotope Effects in the Solvolysis of Sterically Hindered Arenesulfonyl Chlorides

Solvent isotope effects in the ethanolysis of sterically hindered arenesulfonyl chlorides ruled out a proton transfer in the rate‐determining step and agreed with a S_N2 mechanism involving at least a second solvent molecule in the transition state (TS). The lack of a secondary kinetic isotope effect in the o‐alkyl groups allows us to disregard the possible contribution of σ–π hyperconjugation. The measured activation parameters are consistent with a S_N2 mechanism involving the participation of solvent molecules in the TS, possibly forming a cyclic TS through a chain of solvent molecules.     

Application of dimeric cyclopalladated complex of tribenzylamine as an efficient catalyst in the Heck cross-coupling reaction

The activity of [Pd{C₆H₄(CH₂N(CH₂Ph)₂)} (μ-Br)]₂ complex was investigated in the Heck-Mizoroki C-C cross-coupling reaction. This complex is an active and efficient catalyst for the Heck reaction of aryl iodides, bromides and even chlorides and also arenesulfonyl chlorides. The cross-coupled products were produced in excellent yields in short reaction time using a catalytic amount of [Pd{C₆H₄(CH₂N(CH₂Ph)₂) (μ-Br)]₂ complex in NMP at 130 °C.     

Imination of Sulfur-containing Compounds: XXXV. New Preparation Method and Oxidative Benzenesulfonylimination of Unsymmetrical Disulfides

A new preparative method of synthesis was developed for unsymmetrical, symmetricaldisulfides consisting in sulfenylation of sodium thiolates with N-arenesulfenyl-N,N'-bis(arenesulfonyl)sulfin-amidines. Imination of unsymmetrical disulfides with sodium chloroamides of sulfonic acids occurs at the more nucleophilic sulfur atom affording N,N'-bis(arenesulfonyl)sulfinamidines and symmetrical disulfides.     

Hammett-type relationship for the cleavage of radical anions of aromatic chlorides and bromides

A Hammett-type correlation pertaining to the cleavage of radical anions of aromatic halides has been formulated. The expression has been verified using the reaction series of aromatic chlorides and bromides. The correlation reveals the sensitive nature of the carbon-chlorine bond to the polar effects of the substituents in comparison to the carbon-bromine bond. The cleavage rate constants of radical anions of some aromatic chlorides and bromides have been deduced using the correlation. The standard potentials for formation of radical anions of aromatic chlorides and bromides have been estimated based on the correlation.     

END GROUP TRANSFORMATION OF POLYMERS PREPARED BY ATRP,SUBSTITUTION TO AZIDES

Polystyrenes, polyacrylates and poly(methyl methacrylate) prepared by atom transfer radical polymerization (ATRP) have predictable molecular weights, low polydispersities and well-defined halogen end groups. The halogen end groups have been substituted by other functionalities such as azides and amines. In order to predict the feasibility and selectivity of nucleophilic substitution reactions, the reactivities of the end groups of the different polymers were studied. First, model studies with benzyl halide (BzX), 1-phenylethyl halide (1-PEX), methyl 2-halopropionate (MXP), ethyl 2-bromoisobutyrate (EBiB) and 2-halopropionitrile (2-XPN) were performed. The models compounds were dissolved in DMF and after adding sodium azide (1.1 eq.), the reaction mixtures were stirred at 25°C. The relative magnitude of the rate constants for the reactions with the chlorinated substrates were found to be BzCl > MClP > 1-PECl ≈ 2-ClPN:22 > 6 > 1. Increased substitution at the carbon center decreased the rate of reaction, benzyl chloride reacted 22 times faster than 1-phenylethyl chloride. The brominated substrates reacted very fast. The rate constant of 1-PEBr, determined by competition experiments, was 4.5 times higher than the rate constant of benzyl chloride. Based on these results, the bromine end groups of different polymers were substituted under reaction conditions simular to those used for the model reactions. The end-functionalized polymers were characterized by ¹H-NMR, IR and MALDI-TOFMS.     

Palladium‐catalysed reductive carbonylation of aryl halides with iron pentacarbonyl for synthesis of aromatic aldehydes and deuterated aldehydes

The first use of iron pentacarbonyl is described for the novel and efficient conversion of aryl iodides, bromides and chlorides into their corresponding aryl aldehydes and/or aryl deuterated aldehydes. The reaction is catalysed with Pd(0) in aqueous N,N‐dimethylformamide at atmospheric pressure. In this protocol, neither gaseous hydrogen nor any reducing agent is required for the formation of the carbonylated product. The reaction can be performed without a P(III) ligand for aryl iodides; however, employing a P(III) ligand is necessary to perform the reaction with aryl bromides and chlorides. Copyright © 2015 John Wiley & Sons, Ltd.     

Reactions of Phosphonioalkyl Derivatives of Phenylhydrazine and Hydroxylamine

Triphenyl- and tributyl[2-(2-phenylhydrazino)ethyl]phosphonium salts undergo dehydrogenation on heating to form the corresponding phenylhydrazones in high yields. The phenylhydrazone formed from the triphenylphosphonium salt can also be prepared from triphenyl(1-alkoxy-2-bromoethyl)phosphonium bromides. The latter reaction is proposed to involve reduction of the COC group with phenylhydrazine. N,N-Diphosphonioethylation and N,N-diphosphoniopropylation of hydroxylamine are performed. Alkaline hydrolysis of the resulting diphosphonium salts gave N, N-bis[2-(diphenylphosphoryl)ethyl(propyl)]hydroxylamines in high yields.__________Translated from Zhurnal Obshchei Khimii, Vol. 75, No. 7, 2005, pp. 1132–1136.Original Russian Text Copyright © 2005 by Ovakimyan, Barsegyan, Kikoyan, Indzhikyan.     

Competitive kinetic study of the amination of organomagnesium and ‐zinc reagents with acetone O‐sulfonyloxime

Kinetic studies are reported for the electrophilic amination of substituted phenylmagnesium bromides and CuCN‐catalyzed phenylzinc chlorides with acetone O‐(2,4,6‐trimethylphenylsulfonyl)oxime in tetrahydrofuran at reflux temperature and at room temperature respectively. Substituent effects were determined by competition experiments. Rate data are analyzed via Hammett relationships to support the proposed mechanisms for the substitution of these organometallics with an electrophilic amino transfer reagent. Copyright © 2005 John Wiley & Sons, Ltd.     

Reversed Electron Apportionment in Mesolytic Cleavage: The Reduction of Benzyl Halides by SmI2

The paradigm that the cleavage of the radical anion of benzyl halides occurs in such a way that the negative charge ends up on the departing halide leaving behind a benzyl radical is well rooted in chemistry. By studying the kinetics of the reaction of substituted benzylbromides and chlorides with SmI₂ in THF it was found that substrates para‐substituted with electron‐withdrawing groups (CN and CO₂Me), which are capable of forming hydrogen bonds with a proton donor and coordinating to samarium cation, react in a reversed electron apportionment mode. Namely, the halide departs as a radical. This conclusion is based on the found convex Hammett plots, element effects, proton donor effects, and the effect of tosylate (OTs) as a leaving group. The latter does not tend to tolerate radical character on the oxygen atom. In the presence of a proton donor, the tolyl derivatives were the sole product, whereas in its absence, the coupling dimer was obtained by a S_N2 reaction of the benzyl anion on the neutral substrate. The data also suggest that for the para‐CN and CO₂Me derivatives in the presence of a proton donor, the first electron transfer is coupled with the proton transfer.     

Heavy-atom effects on hydrogen-atom transfer reaction from monohalogenated phenols to triplet 7,8-benzoquinoline

The rate constants and the radical yields for the hydrogen-atom transfer reaction from four monohalogenated phenols to triplet 7,8-benzoquinoline were determined by an emission—absorption flash technique. The rate constants are of the order of 10⁹ M⁻¹ s⁻¹ except for 2-bromophenol, and the radical yield Φ_rt decreases on halogen substitution. In the case of monobromophenols, Φ_rt is sensitive to the position of the bromine atom. The rate constant of free radical recombination increases with decreasing Φ_rt. Such heavy-atom effects are explained in terms of the heavy-atom-induced spin relaxation of the triplet radical pair.     

Cyclopolymerization of diallylamine derivatives in dimethyl sulfoxide

Diallyl quaternary ammonium chlorides, bromides and N-alkyldiallylamine hydrochlorides were polymerized with ammonium persulfate (APS) in dimethyl sulfoxide (DMSO). The dependences of yield and molecular weight of polymers on polymerization conditions were examined and quaternary ammonium chlorides were found to have better polymerizability than bromides. The poly(diallyl quaternary ammonium chlorides) obtained with APS—DMSO system are expected to have quite high molecular weights, as determined from the measurement of limiting viscosity numbers of the polymers in NaCl aqueous solution.     

The invention of new radical chain reactions. Part VIII. Radical chemistry of thiohydroxamic esters; A new method for the generation of carbon radicals from carboxylic acids

The aliphatic and alicyclic esters of N-hydroxypyridine-2-thione are readily reduced by tributylstannane in a radical chain reaction to furnish nor-alkanes.¹ In the absence of the stannane a smooth decarboxylatlive rearrangement occurs to give 2-substituted thiopyridines.¹ The radicals present in this reaction provoke with $\text{t}$-butylthiol an efficient radical reaction with formation of nor-alkane and 2-pyridyl-$\text{t}$-butyl disulphide.¹Similarly these carbon radicals can be captured by halogen atom transfer to give noralkyl chlorides, bromides and iodides. 2 With oxygen in the presence of t-butylthiol the corresponding noralkyl hydroperoxides are formed in another radical chain reaction.³     

N‐heterocyclic carbene–palladium complexes for Suzuki–Miyaura coupling reaction with benzyl chloride and aromatic boronic acid leading to diarylmethanes

A family of N‐heterocyclic carbene–palladium(II)–N,N‐dimethylbenzylamine complexes ((NHC)LPdCl₂; L = N,N‐dimethylbenzylamine) were synthesized as well as characterized using single‐crystal X‐ray diffraction and spectroscopic data. These complexes exhibited higher catalytic activities for the Suzuki reaction of benzyl chlorides to afford diarylmethanes under milder conditions than other efficient (NHC)LPdCl₂ complexes. Using the optimum conditions, the expected coupling products were obtained in moderate to high yields. All reactions were carried out in air and all starting materials were used as supplied without purification.     

Dendritic poly(benzyl ether)‐b‐poly(N‐vinylcaprolactam) block copolymers: Self‐organization in aqueous media,thermoresponsiveness and biocompatibility

Four generations of new amphiphilic thermoresponsive linear‐dendritic block copolymers (LDBCs) with a linear poly(N‐vinylcaprolactam) (PNVCL) block and a dendritic poly(benzyl ether) block are synthesized by atom transfer radical polymerization (ATRP) of N‐vinylcaprolactam (NVCL) using dendritic poly(benzyl ether) chlorides as initiators. The copolymers have been characterized by ¹H NMR, FTIR, and GPC showing controlled molecular weight and narrow molecular weight distribution (PDI ≤ 1.25). Their self‐organization in aqueous media and thermoresponsive property are highly dependent on the generation of dendritic poly(benzyl ether) block. It is observed for the LDBCs that the self‐assembled morphology changes from irregularly spherical micelles, vesicles, rod‐like large compound vesicles (LCVs), to the coexistence of spherical micelles and rod‐like LCVs, as the generation of the dendritic poly(benzyl ether) increases. The results of a cytotoxicity study using an MTT assay method with L929 cells show that the LDBCs are biocompatible. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 300–308     

Acid Chloride Synthesis by the Palladium‐Catalyzed Chlorocarbonylation of Aryl Bromides

We report a palladium‐catalyzed method to synthesize acid chlorides by the chlorocarbonylation of aryl bromides. Mechanistic studies suggest the combination of sterically encumbered PtBu₃ and CO coordination to palladium can rapidly equilibrate the oxidative addition/reductive elimination of carbon–halogen bonds. This provides a useful method to assemble highly reactive acid chlorides from stable and available reagents, and can be coupled with subsequent nucleophilic reactions to generate new classes of carbonylated products.