Stabilization of lattice period in quinary solid solutions of the <Emphasis Type="Italic">A</Emphasis><Superscript>3</Superscript><Emphasis Type="Italic">B</Emphasis><Superscript>5</Superscript> compounds

The stabilizing effect of elastic strains on the lattice period of a quinary solid solution is considered. The expression for the stabilization factor for quinary solid solutions of the A_xB_1?xC_yD_zE_1?y?z type is derived. It is shown that the stabilizing influence of the substrate sharply increases in the vicinity of the region of the chemical spinodal. The stabilization factors are calculated for the Ga_xIn_1?xP_yAs_zSb_1?y?z and A1_xGa_yIn_1?x?yP_zAs_1?z quinary solid solutions isoperiodic to InAs, GaSb, and GaAs. It is shown that in the region of thermodynamic instability the stabilization factor has negative values. The changes in the composition of the above elastically strained quinary solid solutions are analyzed with respect to the equilibrium composition. It is also shown that stabilization of the lattice period does not signify the stabilization of its composition.     

Phase equilibria of <Emphasis Type="Italic">A</Emphasis><Superscript>3</Superscript><Emphasis Type="Italic">B</Emphasis><Superscript>5</Superscript> quinary systems with an elastically strained solid phase

The contribution of the elastic component of the excess energy of mixing is determined for A³B⁵ quinary solid solutions. A relationship is derived for the activities of the components in an elastically strained solid phase of the quinary solid solutions. The correctness of the possible assumptions used in the calculation of the activity coefficients of the solid phase of a quinary solution is analyzed. The contact supercooling in the vicinity of the binary substrate isoperiods is calculated for a number of A³B⁵ quinary systems. It is shown that the negative contact supercoolings correspond to the thermodynamic instability boundaries of the quinary solid solutions.     

Structure and features of the surface morphology of <Emphasis Type="Italic">A</Emphasis><Superscript>4</Superscript><Emphasis Type="Italic">B</Emphasis><Superscript>6</Superscript> chalcogenide epitaxial films

The structure and features of the surface morphology of Pb_{1 − x} Mn _x Se (x = 0.03) epitaxial films grown on freshly cleaved BaF₂(111) faces and PbSe_{1 − x} S _x (100) (x = 0.12) single-crystal wafers were investigated by molecular beam condensation and the hot-wall method. It is shown that the epitaxial films, in accordance with the data in the literature for other chalcogenides, grow in the (111) and (100) planes, repeating the substrate orientation. Black aggregates are observed on the film surface of the films grown. The results obtained are compared with the data in the literature and generalized for other chalcogenides: A ⁴ B ⁶:Pb (S, Se, Te); Pb_{1 − x} Sn _x (S, Se, Te); and Pb_{1 − x} Mn (Se, Te). It is established that the formation of black aggregates, which are second-phase inclusions on the surface of epitaxial films obtained by vacuum thermal deposition, is characteristic of narrow-gap A ⁴ B ⁶ chalcogenides.     

Elastic and dielectric properties of A<Superscript>II</Superscript>B<Stack><Subscript>2</Subscript><Superscript>V</Superscript></Stack> (<Emphasis Type="Italic">A</Emphasis> = Cd or Zn, <Emphasis Type="Italic">B</Emphasis> = P or As) single crystals

Elastic and dielectric properties of CdP₂, ZnP₂, and ZnAs₂ single crystals are investigated at frequencies of 10², 10³, 10⁴, 10⁶, and 10⁷ Hz in the [00l], [h00], and [hk0] directions in the temperature range 78–400 K. The elastic constants, the Gruneisen parameters, and the force constants of the crystals are calculated from the measured ultrasonic velocities. The elastic constants C_ij decrease with an increase in temperature and anomalously change in narrow (ΔT = 10–20 K) temperature ranges. The permittivity sharply increases from ε ≈ 7–14 at 78–150 K to ε ≈ 10²–10³ in the temperature range 175–225 K without any signs of a structural phase transition. The behavior of the temperature-frequency dependences of the complex permittivity ε*(f, T) is typical of relaxation processes. The dielectric relaxation in A^IIB ₂ ^V is considered on the basis of the model of isolated defects. The conuctivity σ of the single crystals under study is a sum of the frequency-dependent (hopping) conductivity σ_h and the conductivity σ_s that is typical of semiconductors. The hopping conductivity increases with an increase in frequency according to the law σ _h ～f^α, where α < 1 at low temperatures and α > 1 at high temperatures.     

Nanocrystalline <Emphasis Type="Italic">sp</Emphasis> <Superscript>2</Superscript> and <Emphasis Type="Italic">sp</Emphasis> <Superscript>3</Superscript> carbons: CVD synthesis and applications

The design and production of innovative materials based on nanocrystalline sp²- and sp³-coordinated carbons is presently a focus of the scientific community. We present a review of the nanostructures obtained in our labs using a series of synthetic routes, which make use of chemical vapor deposition (CVD) techniques for the selective production of non-planar graphitic nanostructures, nanocrystalline diamonds, and hybrid two-phase nanostructures.     

A New <Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-Dimethyl Purine from an Australian <Emphasis Type="Italic">Dictyoceratid Sponge</Emphasis>

Abstract  

N6-methyl mucronatine (C₈H₁₂N₅O) has been isolated from a dictyoceratid sponge collected in South East Queensland. The solid state structure of the new metabolite (I) was confirmed by X-ray crystallography, while an NMR study in d ₄-MeOH reveals the presence of a minor tautomer identified as (II).     

Synthesis and structure of 7-methyl-5-phenyl-1<Emphasis Type="Italic">H</Emphasis>-pyrazolo[4,3-<Emphasis Type="Italic">e</Emphasis>]tetrazolo[4,5-<Emphasis Type="Italic">b</Emphasis>][1,2,4]triazine<Superscript>(1)</Superscript>

The synthesis of 5-azido-3-methyl-1-phenyl-1H-pyrazolo[4,3-e][1,2,4]triazine 2 and 7-methyl-5-phenyl-1H-pyrazolo[4,3-e]tetrazolo[4,5-b][1,2,4]triazine 3 is described and the crystal and molecular structure of the latter is reported. This compound crystallizes in the monoclinic system, space group P2₁/n, with cell constants a = 11.607(2) Å, b = 7.982(1) Å, c = 13.147(2) Å, = 110.60(1), Z = 4, T = 293 K and D_cal = 1.470 g cm^–3. The structure was solved by direct methods and refined to R value of 0.0368 for 1906 reflections. The X-ray analysis revealed that the linear form of the tetrazolo-fused ring system of 3 exists in the crystal. The molecule as a whole has an almost planar conformation stabilized by the short intramolecular NsH interaction. The molecular packing in the crystal is determined by the van der Waals forces only.Part 26 in 1,2,4-triazines in organic synthesis. For part 25 see Mojzych et al.¹     

Structure of Triammonium <Emphasis Type="Italic">fac</Emphasis>-Trichloridotrioxidorhenate(VII) Chloride with <Emphasis Type="Italic">C</Emphasis><Subscript>3<Emphasis Type="Italic">v</Emphasis></Subscript> Crystallographic Symmetry of the Complex Anion

Abstract  

The unstable crystals of triammonium fac-trichloridotrioxidorhenate(VII) chloride have been obtained from ammonium rhenate(VII) solution in concentrated hydrochloric acid. The crystal structure consists of fac-trichloridotrioxidorhenate(VII) anions, chloride anions and ammonium cations. Each fac-trichloridotrioxidorhenate(VII) anion and each chloride anion lies in special position of 3m site symmetry (cell parameters: a = 9.026(3) Å; c = 7.690(4) Å; space group: P6₃ mc). The ammonium cation lies in special position of m site symmetry. The following anion geometrical parameters of the fac-trichloridotrioxidorhenate(VII) anion have been obtained: Re–O bond length of 1.720(2) Å, Re–Cl bond length of 2.5428(9) Å, the bond angles: O–Re–O of 103.5(1)° and Cl–Re–Cl of 79.8(1)°.     

Crystal Structure of Two <Emphasis Type="Italic">V</Emphasis>-shaped Ligands with <Emphasis Type="Italic">N</Emphasis>-Heterocycles

Two V-shaped ligands with N-heterocycles, bis(4-(1H-imidazol-1-yl) phenyl)methanone (1), and bis(4-(1H-benzo[d]imidazol-1-yl)phenyl)methanone (2) have been synthesized and characterized by elemental analyses, IR and 1H NMR spectroscopy. Crystal structures of 1 and 2 have been determined by X-ray diffraction. The crystal of 1 is monoclinic, sp. gr. P2₁/c, Z = 4. The crystal of 2 is orthorhombic, sp. gr. Fdd2, Z = 8. X-ray diffraction analyses show that the V-shaped angles of 1 and 2 are 122.72(15)° and 120.7(4)°, respectively. Intermolecular C–H···O, C–H···N, C–H···π, and π···π interactions link the components into three-dimensional networks in the crystal structures.     

2<Emphasis Type="Italic">D</Emphasis> quasi-periodic Rauzy tiling as a section of 3<Emphasis Type="Italic">D</Emphasis> periodic tiling

A method for constructing a 2D quasi-periodic Rauzy tiling Til as a section of some 3D periodic tiling Til ^3D is considered. The translation lattice of the tiling Til ^3D and its connectivity graph are constructed using the discrete modeling of packings. The calculation of the layer-by-layer growth polyhedron for the tiling Til ^3D made it possible to estimate from upper the shape of a growth polygon for the tiling Til. As a result, the growth shape in six out of eight growth sectors has been rigorously proven. A set of quasi-periodic tilings (locally indistinguishable from the Rauzy tiling Til), including seven centrosymmetric tilings, has been obtained.     

Structure of 6,13-bis(<Emphasis Type="Italic">N</Emphasis>, <Emphasis Type="Italic">N</Emphasis>-dimethylcarbamoyl) thioquinanthrene

The crystal structure of 6,13-bis-(N,N-dimethylcarbamoyl)thioquinanthrene 3 has been determined as monoclinic, with space group P2(1)/c with lattice parameters a = 10.044(2) Å, b = 21.385(4) Å, c = 10.889(3) Å, = 102.92(3)°, Z = 4 and D_calc = 1.342 Mg/m³. The middle 1,4-dithiin ring in the title compound 3, C₂₄H₂₀N₄O₂S₂ is in a boat conformation with the dihedral angle between the planes of the aromatic rings 132.45(8)°.     

Electron diffraction study of 1<Emphasis Type="Italic">M</Emphasis> illites with interstratified <Emphasis Type="Italic">trans</Emphasis>- and <Emphasis Type="Italic">cis</Emphasis>-vacant 2 : 1 layers

Illites from the volcanogenic Zn-Au-Ag sulfide deposit Galkinskoe (Northern Urals) have been investigated using oblique-texture electron diffraction patterns in combination with the simulation of diffraction effects. Along with single-phase tv/cv1M illites, the structures of which are formed by statistically interstratified dioctahedral 2: 1 layers with vacant trans- or cis-octahedra, illites in the form of a mixture of two interstratified tv/cv1M phases, with the dominance of tv- or cv layers, are identified. It is shown that in the latter case the diffraction pattern can also be interpreted within the single-phase tv/cv model, provided that the tv- and cv layers are distributed with some tendency to segregate. The structural features indicating the preference of the two-phase model are analyzed.     

Crystal Structure and Conformational Analysis of 4-[(<Emphasis Type="Italic">p</Emphasis>-<Emphasis Type="Italic">N</Emphasis>,<Emphasis Type="Italic">N</Emphasis>-Dimethylamino)Benzylidene]-2-Phenyloxazole-5-One

Abstract  

Molecular and crystal structure of 4-[(p-N,N-dimethylamino)benzylidene]-2-phenyloxazol-5-one, C₁₈H₁₆N₂O₂, have been determined by single crystal X-ray diffraction study. The title compound is monoclinic, with a = 12.1704(23) ?, b = 3.9810(5) ?, c = 30.9603(56) ?, β = 101.176(15)°, Z = 4, D _x = 1.32 g/cm³, μ(Mo Kα) = 0.087 mm⁻¹, and space group is P12₁/c1. The structure was solved by direct methods and refined to a final R = 0.047 for 3166 reflections with I > 2σ(I). The crystal structure is stabilized by C–H⋯O and C–H⋯N type intra-molecular, C–H⋯O type inter-molecular interactions. To enlighten the flexibility and the geometric isomerism (E or Z) of the title compound, the selected torsion angle is varied from −180 to 180° in every 10° separately and molecular energy profile is calculated and analyzed.     

Distribution of component molecules in <Emphasis Type="Italic">p</Emphasis>-dibromobenzene-<Emphasis Type="Italic">p</Emphasis>-dichlorobenzene solid solutions from raman effect data

Distribution of component molecules in the bulk of single crystals of p-dibromobenzene-p-dichlorobenzene solid solutions grown by the Bridgman method studied by Raman effect.     

Crystal and Molecular Structures of Di-1-Adamantylthiophosphinic Chloride, <Emphasis Type="Italic">P</Emphasis>,<Emphasis Type="Italic">P</Emphasis>-Diphenyl-<Emphasis Type="Italic">N</Emphasis>-Benzyl Phosphinothioic- and Selenoic- Amides

Abstract  Synthesis and X-ray structural determination of three phosphorus compounds are reported. (3b) is monoclinic P2(1)/c with a = 11.852(1), b = 12.825(1), c = 12.445(1) ?, β = 103.693(1)o; (4a) and (4b) are monoclinic P2(1)/n with a = 12.1422(16), b = 9.0860(12), c = 14.845(2) ?, β = 96.498(3)o for (4a), and a = 12.2714(16), b = 9.2812(12), c = 14.800(2) ?, β = 97.176(2)o for (4b). They all exhibit distorted tetrahedral geometry about the P atom. Ph₂P(X)NHC₇H₇ (X=S (4a) and X=Se (4b)) show typical P–S and P–Se double bond distances and P–N single bonds, while P–S bond in 1-Ad₂P(S)Cl (3b) is comparable to P–S single bonded probably due to the largeness of 1-adamantyl groups. Graphical Abstract  Synthesis and X-ray structural determination of 1-Ad₂P(S)Cl (3b), Ph₂P(S)NHC₇H₇ (4a) and Ph₂P(Se)NHC₇H₇ (4b) are reported.      

Synthesis of <Emphasis Type="Italic">E</Emphasis> Isomer and Crystal Structures of <Emphasis Type="Italic">E</Emphasis> and <Emphasis Type="Italic">Z</Emphasis> Isomers of 3-(2,5-Dimethoxyphenyl)-2-(4-methoxyphenyl)acrylonitrile

Abstract Details of the synthesis of the E isomer of 3-(2,5-dimethoxyphenyl)-2-(4-methoxyphenyl)acrylonitrile, and the X-ray crystal structures of both the E and Z isomers of this compound are presented. The E isomer crystallizes in the P2₁/c space group with cell parameters, a = 8.5659(17) ?, b = 16.399(3) ?, c = 11.224(2) ?, α = 90°, β = 95.27(3)°, γ = 90°and Z = 4. The Z isomer crystallizes in the Pca2₁ space group with cell parameters, a = 4.1223(8) ?, b = 19.113(4) ?, c = 19.453(4) ?, α = 90°, β = 90°, γ = 90° and Z = 4. Index Abstract Synthesis of E isomer and X-ray crystal structure determination of both E and Z isomers of 3-(2,5-dimethoxyphenyl)-2-(4-methoxyphenyl)acrylonitrile are presented.      

Comparative analysis of spatial organization of laccases from <Emphasis Type="Italic">Cerrena maxima</Emphasis> and <Emphasis Type="Italic">Coriolus zonatus</Emphasis>

Laccase (oxygen oxidoreductase, EC 1.10.3.2) belongs to the multicopper oxidase family. The main function of this enzyme is to perform electron transfer from the oxidized substrate through the mononuclear copper-containing site T1 to the oxygen molecule bound to the site T3 in the trinuclear T2/T3 cluster. The structures of two new fungal laccases from C. maxima and C. zonatus were solved on the basis of synchrotron X-ray diffraction data. Both laccases show high structural homology with laccases from other sources. The role of the carbohydrate component of laccases in structure stabilization and formation of ordered protein crystals was demonstrated. In the structures of C. maxima and C. zonatus laccases, two water channels of functional importance were found and characterized. The structural results reported in the present study characterize one of the functional states of the enzyme fixed in the crystal structure.     

Structural Features of <Emphasis Type="Italic">Ortho</Emphasis>-hydroxy Bis-phenols and Their Comparison with <Emphasis Type="Italic">Para</Emphasis>-hydroxy Bis-phenols

Abstract The crystal structures of four bis-phenols are reported to substantiate the fact that the weak interactions play a major role in the crystal packing of bis-phenols. The reaction of 2,4-dimethylphenol with aldehydes such as 2-naphthaldehyde, terephthaldehyde in the presence of trifluoracetic acid gave 2-[bis(2-hydroxy 3,5-dimethylphenyl)methyl]naphthalene (1) and 4-[bis(2-hydroxy 3,5-dimethylphenyl) methyl]benzaldehyde (2), respectively. The 2-[bis-(2-hydroxy 3,5-dimethylphenyl)-methyl]naphthalene (1) crystallizes in orthorhombic, Pbca, a = 11.905(3) ?, b = 18.788(5) ?, c = 18.894(5) ?, 4-[bis(2-hydroxy 3,5-dimethylphenyl)methyl] benzaldehyde (2) in monoclinic, Cc, a = 8.880(3) ?, b = 16.394(7) ?, c = 13.700(5) ?, γ = 104.542(2)°. The reaction of 2-nitrobenzaldehyde with 2,4-dimethylphenol gave 2-benzo[c] isoxazo-3-yl 4,6-dimethylphenol (3) and its crystal parameters are orthorhombic, P2₁2₁2₁, a = 7.737(6) ?, b = 11.885(9) ?, c = 13.336(8) ?. The reaction of 2,6-dimethylphenol with 4-nitrobenzaldehyde and 2-chlorobenzaldehyde gave bis(4-hydroxy 3,5-dimethylphenyl)(4-nitrophenyl)methane (4) and bis(4-hydroxy 3,5-dimethylphenyl)(2-chlorophenyl)methane (5), respectively. The bis(4-hydroxy 3,5dimethylphenyl)(4-nitrophenyl)methane (4) crystallizes in monoclinic, C2/c, a = 25.921(1) ?, b = 12.202(4) ?, c = 15.6084(7) ?, β = 122.172(4)°, and bis(4-hydroxy 3,5-dimethylphenyl) (2-chlorophenyl)methane crystallizes as acetonitrile solvate (5) in triclinic, P-1, a = 12.314(3) ?, b = 14.111(3) ?, c = 15.078(5) ?, α = 98.268(2)°, β = 111.268(2)°, γ = 114.304(1)˚. The unit cell of 5 contains two pairs of crystallographically unsymmetric molecules of bis-phenols. Index abstract The crystal structures of four bis-phenols are reported to substantiate the fact that the weak interactions plays a major role in crystal packing and can induce symmetry non-equivalence among bis-phenols in unit cell of bis-phenols.      

Synthesis and Crystal Structure of (5-Methyl-3-phenyl-1<Emphasis Type="Italic">H</Emphasis>-pyrazol-1-yl)-[5-(<Emphasis Type="Italic">p</Emphasis>-tolylamino)-2<Emphasis Type="Italic">H</Emphasis>-1,2,3-triazol-4-yl]methanone

Abstract  

(5-Methyl-3-phenyl-1H-pyrazol-1-yl)-[5-(p-tolylamino)-2H-1,2,3-triazol-4-yl]methanone was synthesized and characterized by ¹H NMR, MS and IR spectra data. The structure of title compound was identified by X-ray diffraction. Compound, C₂₀H₁₈N₆O, Mr = 358.40, crystallizes in the triclinic space group P-1 with unit cell parameters a = 10.303(6), b = 12.489(7), c = 15.305(9) ?, α = 108.489(12), β = 101.920(11), γ = 96.971(13)°, V = 1790.0(17) ?³, Z = 4, Dx = 1.330 mg/cm³. The final R was 0.0520.     

Nanoclusters based on pentagondodecahedra with shells in the form of <Emphasis Type="Italic">D</Emphasis>32, <Emphasis Type="Italic">D</Emphasis>42, and <Emphasis Type="Italic">D</Emphasis>50 deltahedra in crystal structures of intermetallic compounds

The TOPOS software package has been used to form a database of intermetallic compounds containing pentagondodecahedral d clusters (528 crystal structures of intermetallic compounds, 111 topological types, and 47 space symmetry groups). On the whole, 606 atomic d configurations have been selected which are described by 14 point symmetry groups. Examples of nanoclusters are presented which are precursors of the crystal structures of intermetallic compounds with the outer shell in the form of deltahedra D, which are formed above dodecahedra. These nanoclusters are identified in the automatic mode of structural data processing: D32 (K₈In₆Ge₄₀, Cs₃₀Na₃Sn₁₆₂), D ₄₂ (Ru₃Be₁₇, Y₃Cd₁₈, Ca₃(Cd₁₇Al)), and D ₅₀ (Yb₃Zn₁₈, Ce₃(Au₁₄Sn₃), Pr₃Cd₁₈, Eu₄Cd₂₅), where 32, 42, and 50 are the numbers of atoms in the shell. Similar deltahedra were found previously in icosahedral nanoclusters (precursors of intermetallic compounds). Structures with the dodecahedral nanocluster precursors containing D42 and D50 deltahedra are approximants of MCd_5.7 (M = Yb or Ca) quasicrystals and belong to the family of MCd₆ (M = Ce, Pr, Nd, Sm, Eu, Gd, Dy, Yb, Y, or Ca).