Velocity gradients in a turbulent jet flow

We present a selection of results from experiments on an air turbulent jet flow, which included measurements of all the three velocity components and their nine gradients with the emphasis on the properties of invariant quantities related to velocity gradients (enstrophy, dissipation, enstrophy generation, etc.). This has been achieved by a 21 hot wire probe (5 arrays x 4 wires and a cold wire), appropriate calibration unit and a 3-D calibration procedure [1]. A more detailed account on the results will be published elsewhere.     

Numerical prediction of turbulent flow structure generated by a synthetic cross‐jet into a turbulent boundary layer

A detailed numerical study using large‐eddy simulation (LES) and unsteady Reynolds‐averaged Navier–Stokes (URANS) was undertaken to investigate physical processes that are engendered in the injection of a circular synthetic (zero‐net mass flux) jet in a zero pressure gradient turbulent boundary layer. A complementary study was carried out and was verified by comparisons with the available experimental data that were obtained at corresponding conditions with the aim of achieving an improved understanding of fluid dynamics of the studied processes. The computations were conducted by OpenFOAM C++, and the physical realism of the incoming turbulent boundary layer was secured by employing random field generation algorithm. The cavity was computed with a sinusoidal transpiration boundary condition on its floor. The results from URANS computation and LES were compared and described qualitatively and quantitatively. There is a particular interest for acquiring the turbulent structures from the present numerical data. The numerical methods can capture vortical structures including a hairpin (primary) vortex and secondary structures. However, the present computations confirmed that URANS and LES are capable of predicting current flow field with a more detailed structure presented by LES data as expected. Copyright © 2011 John Wiley & Sons, Ltd.     

Spreading of a boundary jet in a counter flow

Translated from Zhurnal Prikladnoi Mekhaniki i Tekhnicheskoi Fiziki, No. 2, pp. 95–100, March–April, 1991.     

Large-eddy simulation of turbulent buoyancy-driven flow in a rectangular cavity

Turbulent buoyancy-driven flow in a rectangular cavity with two differentially heated opposite walls is investigated numerically by means of large-eddy simulation (LES). Different dynamic global-coefficient subgrid-scale models for weakly compressible flows are applied to simulate the natural convective flow. It is shown that transition of the boundary layer is delayed in cases where the model coefficients are fixed or changing dynamically according to the Germano identity. On the contrary, in the ‘global equilibrium’ approach, the result shows an earlier change in flow regime due to lower subgrid-scale viscosity. Further, it is also demonstrated that three-dimensional effects of the natural convective flow may be significant due to the presence of adiabatic side walls.     

A numerical study of a rectangular jet along a shear free boundary: Surface jet

A numerical simulation of a rectangular surface jet is performed at a Reynolds number of ${\mathit{Re}}_j=4400$. The global parameters of the jet e.g. maximum velocity decay, jet surface normal and lateral spread rates, entrainment, jet momentum flux and turbulent momentum flux are in agreement with several other studies reported in the literature. It is shown that the mean velocity and Reynolds stress profiles scale with the maximum local streamwise velocity and jet half width in the surface normal and lateral directions. The current simulation provides balance, explicitly calculated budgets for the turbulence kinetic energy, Reynolds normal and shear stresses. The surface jet develops a thin layer of fast moving fluid in the lateral direction near the surface. This layer is called the ‘surface current’. It has been suggested that the surface current arises due to the Reynolds stress anisotropy in the near surface region. The current study shows that this explanation is incomplete. The turbulence production for the Reynolds stress in the lateral direction is negative, which can drive the mean flow in the lateral direction. The higher level of negative production in the near surface region is responsible for the development of the surface current.     

Experimental investigation on the similarity of a 3D rectangular turbulent jet

 The paper presents an experimental investigation of turbulent jets issuing from rectangular nozzles. Nozzles with aspect ratios between 3 and 10 were used. Eight different initial conditions were studied. The following jet parameters were measured and evaluated: mean velocity components, jet boundaries, jet momentum, jet entrainment, turbulence intensities and Reynolds stresses. A DISA 55M thermoanemometer and a data acquisition system BE256 were used. The influence of the initial conditions on the similarity of the flow was determined with respect to the mean axial velocity, turbulence intensity and the Reynolds stresses. A significant influence of the initial conditions on the flow structure was observed. The possibility for jet control is discussed and suggestions are given about the need to investigate different parameters. Received: 25 November 1996/Accepted: 30 October 1997     

Interactive boundary layers in turbulent flow

An asymptotic analysis of the structure of the flow at high Reynolds number around a streamlined body is presented. The boundary layer is turbulent. This question is studied with the successive complementary expansion method, SCEM. The starting point is to look for a uniformly valid approximation (UVA) of the velocity field, including the boundary layer and the external flow. Thanks to the use of generalized expansions, SCEM leads to the theory of interactive boundary layer, IBL. For many years, IBL model has been used successfully to calculate aerodynamic flows. Here, the IBL model is fully justified with rational mathematical arguments. The construction of a UVA of the velocity profile in the boundary layer is also studied. To cite this article: J. Cousteix, J. Mauss, C. R. Mecanique 335 (2007).     

An experimental study on unsteady turbulent near wake of a rectangular cylinder in channel flow

 Unsteady turbulent near wake of a rectangular cylinder in channel flow has been studied experimentally with a laser Doppler velocimetry (LDV). The time-averaged and phase-averaged statistics were measured for the cylinders having various width-to-height ratios, b/h. It is shown that the turbulent intensities on the centerline of the channel have their maxima near the rear stagnation point of a recirculation region. The contours of coherent vorticity and streamline reproduce clearly the shed vortices from the cylinder observed by the flow visualization. The characteristics of the flow field, which depends on b/h, are discussed and the significant contribution of the coherent structure to the flow field is clarified. Moreover, the turbulent kinetic energy budget has been examined. Received: 19 January 1998/Accepted: 21 July 1998     

The turbulent/non-turbulent interface at the outer boundary of a self-similar turbulent jet

The flow at the outer boundary of a submerged self-similar turbulent jet at Re=2᎒³ is investigated experimentally by means of combined particle image velocimetry (PIV) laser-induced fluorescence (LIF) measurements. The jet fluid contains a fluorescent dye so that the LIF data can be used to discriminate between the jet fluid and the ambient fluid. The axial velocity, Reynolds stress, and vorticity are determined relative to the jet boundary. The results are compared against the conventional profiles, and the results of a direct numerical simulation of the turbulent far-wake behind a flat plate. The results show a sharp transition between rotational and irrotational fluid at the fluid interface, and the existence of a layer of irrotational velocity fluctuations outside the turbulent region.     

Experimental analysis of transverse intermittency in a turbulent jet flow

The statistical properties of the velocity differences are experimentally investigated in a turbulent jet-flow at moderate Re _λ by X-probe hot wire anemometry measurements. It is found that the traverse velocity components show a more intermittent behavior with respect to the longitudinal ones. This result is obtained by the analysis of the longitudinal and transverse intermittency exponents measured by the Extended Self-Similarity form of scaling, and by the comparison of the longitudinal and transverse velocity difference Probability Distribution Functions. Received: 25 March 1996/Accepted: 15 August 1996     

Investigation of the flow structure in a plane turbulent jet

Results of an experimental investigation of a plane, submerged air jet are elucidated. The distribution of the mean velocity, the longitudinal and transverse velocity component pulsations, the tangential friction stress, and the correlation coefficient in jet cross sections are presented. The results of measurements are compared with the data of other authors.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 4, pp. 176–179, July–August, 1970.     

An experimental study on the two-dimensional opposed wall jet in a turbulent boundary layer: Change in the flow pattern with velocity ratio

Results of the measurement of flow properties in a two-dimensional turbulent wall jet which is injected into the turbulent boundary layer in the direction opposite to that of the boundary layer flow are presented by varying the ratio of the jet issuing velocity to the mainstream velocity . This flow includes the flow separation and the recirculating flow, and so it requires the magnitude and direction of instantaneous velocity be measured. In the present work, a tandem hot-wire probe is manufactured and its characteristics are examined experimentally. With the use of this probe the change in the penetration length of the jet with the velocity ratio is investigated. It is clarified that two regimes of flow patterns exist: in the low velocity ratio the penetration length of the jet changes little with , and in the high velocity ratio it goes far from the nozzle with increasing . Streamlines, turbulence intensity contours and static pressure contours are presented in the two typical velocity ratios corresponding to each of two flow patterns, and they are compared.List of symbols b ₀ nozzle width (Fig. 1) - , e mean and fluctuating output voltages of hot-wire anemometer - p, p mean static pressure, p = p – p _o - p ₀ static pressure in undisturbed mainstream - p _w , p _w mean wall pressure, p _w = p _w – p _o - U ₀ mainstream velocity - U _j jet velocity at the nozzle exit - , u mean and fluctuating velocity components in x-direction - u _e effective cooling velocity - x distance along the wall from nozzle exit - x _pmax, x _pmin positions where the wall pressure has maximum and minimum values respectively - x _s penetration length of jet - y distance from the wall - forward flow fraction - ₁, ₂ yaw and pitch angles of flow direction (Fig. 4) - velocity ratio, = U _j /U _o - density of the fluid - nondimensional stream function The authors wish to express their appreciation to Prof. Toshio Tanaka of Gifu University for his advice in the course of the experiment. They also would like to thank the Research Foundation for the Electrotechnology of Chubu which partly supported this work.     

Numerical and experimental investigation of turbulent flow in a rectangular duct

Details of the turbulent flow in a 1:8 aspect ratio rectangular duct at a Reynolds number of approximately 5800 were investigated both numerically and experimentally. The three-dimensional mean velocity field and the normal stresses were measured at a position 50 hydraulic diameters downstream from the inlet using laser doppler velocimetry (LDV). Numerical simulations were carried out for the same flow case assuming fully developed conditions by imposing cyclic boundary conditions in the main flow direction. The numerical approach was based on the finite volume technique with a non-staggered grid arrangement and the SIMPLEC algorithm. Results have been obtained with a linear and a non-linear (Speziale) k–ε model, combined with the Lam–Bremhorst damping functions for low Reynolds numbers. The secondary flow patterns, as well as the magnitude of the main flow and overall parameters predicted by the non-linear k–ε model, show good agreement with the experimental results. However, the simulations provide less anisotropy in the normal stresses than the measurements. Also, the magnitudes of the secondary velocities close to the duct corners are underestimated. © 1998 John Wiley & Sons, Ltd.     

Propagation of an underexpanded turbulent jet in a parallel supersonic flow

The characteristics of supersonic off-design turbulent jets discharging into parallel supersonic flows are investigated numerically using approximate equations for the effective turbulent viscosity which are derived by analysis of the experimental data.     

Coherent contribution to turbulent mixing of a jet in cross flow

In this work, an experimental study of a jet issuing in cross flow is reported. Support is offered to a theory on the origin of Karman-like vortices, in the wake of jets issuing in boundary layers. Further, a coherent structure with strong contribution to the energetics of the flow field is identified here. This structure has not been reported earlier, according to the present authors' knowledge, and it is shown to be related to engulfment of external fluid at the bottom of the jet, and to interesting stochastic and spectral characteristics of the flow field. Three-dimensional plots of the coherent quantities, based on experimental data, reveal a double-helical morphology of the coherent structure. The same morphology has recently been proposed for the far field of jets issuing in stagnant fluid (i.e., without cross flow). The results of this study are expected to support theoretical and numerical work on jets issuing in cross flow.     

An inclined wall jet: Mean flow characteristics and effects of acoustic excitation

 The mean velocity field of a 30° inclined wall jet has been investigated using both hot-wire and laser Doppler anemometry (LDA). Provided that the nozzle aspect ratio is greater than 30 and the inclined wall angle (β) is less than 50°, LDA measurements for various β show that the reattachment length is independent of the nozzle aspect ratio and the nozzle exit Reynolds number (in the range 6670–13,340). There is general agreement between the reattachment lengths determined by LDA and those determined using wall surface oil film visualisation technique. The role of coherent structures arising from initial instabilities of a 30° wall jet has been explored by hot-wire spectra measurements. Results indicate that the fundamental vortex roll-up frequency in both the inner and outer shear layer corresponds to a Strouhal number (based on nozzle exit momentum thickness and velocity) of 0.012. The spatial development of instabilities in the jet has been studied by introducing acoustic excitation at a frequency corresponding to the shear layer mode. The formation of the fundamental and its first subharmonic has been identified in the outer shear layer. However, the development of the first subharmonic in the inner shear layer has been severely suppressed. Distributions of mean velocities, turbulence intensities and Reynolds shear stress indicate that controlled acoustic excitation enhances the development of instabilities and promotes jet reattachment to the wall, resulting in a substantially reduced recirculation flow region. Received: 24 November 1998/Accepted: 24 August 1999     

Interaction of a turbulent jet and a cocurrent confined incompressible flow

The effects induced in a coaxial circular channel flow by an axisymmetric turbulent jet are investigated for various values of the velocity and radius ratios 0.16m<1 and 2.5f30.9. The problem is solved by means of an e-L model of turbulence [1, 2]. The calculation scheme differs from the usual one for boundary layers, jets and wakes in that the pressure p is assumed to be unknown and is determined by assigning the boundary conditions for the radial velocity component and the transverse gradient of the longitudinal velocity component on both boundaries. On the basis of the calculations and the experimental data of [3, 4] generalized relations are obtained. These make it possible to estimate the turbulence characteristics of an axisymmetric jet in a confined cocurrent flow when the pressure is variable along the flow.Translated from Izvestiya Akademii Nauk SSSR, Mekhanika Zhidkosti i Gaza, No. 5, pp. 14–19, September–October, 1986.In conclusion, the author wishes to thank G. S. Glushko for constructive discussion of the results and useful advice.