熔化提取-毛细管气相色谱法测定乙二醇硬脂酸酯中乙二醇的残留量

提出了毛细管气相色谱法测定乙二醇硬脂酸酯中乙二醇残留量的方法。样品在50℃熔化,经甲醇超声浸提,以丙二醇为内标,采用HP-5毛细管色谱柱分离,用火焰离子化检测器测定。乙二醇的质量浓度在102.6~1 026.0 mg.L-1范围内呈线性,方法的检出限(3S/N)为30 mg.L-1。应用此方法分析乙二醇硬脂酸酯,回收率在93.7%~103.2%之间。     

用毛细管气相色谱法测定多糖中单糖的组成

报道了测定多糖中单糖组成的糖醇乙酸酯的毛细管气相色谱分析方法。使用ＯＶ－２２５毛细管气相色谱柱分离了１１种单糖的糖醇乙酸酯衍生物,在０．２～１．６８ｇ／Ｌ质量浓度范围内,１１种单糖定量校正曲线的线性关系廊。应用该法测定了胡麻我发多糖和少 我中单糖的组成。为这些药物多糖的基础研究提供了有用的信息。     

反相毛细管整体柱的制备及其在多肽混合物分离中的应用

采用甲基丙烯酸月桂酯为基础功能单体,乙二醇二甲基丙烯酸酯为交联剂,正十二醇、1,4-丁二醇及二甲基亚砜为致孔剂,在内径为75 μm的石英毛细管内制备了具有良好机械性能及化学稳定性的反相毛细管整体柱。考察了致孔剂的种类、比例以及交联剂在单体混合物中的比例对柱压和分离效果的影响;以单体15%、交联剂15%、致孔剂70%(均为质量分数)作为优化配方,在70 ℃条件下反应24 h;并对所合成的毛细管整体柱进行了电镜表征,测试了流速、柱长与柱压的关系。结果表明,毛细管整体柱的通透性良好,可通过延长柱长的方法提高分离效果。将所制备的毛细管整体柱装于纳升级高效液相色谱仪上进行牛血清白蛋白及血浆样本的胰蛋白酶酶切液的分离,获得了比较理想的分离效果。     

新型聚合物多孔涂层毛细管开管柱的制备及电色谱研究

以甲基丙烯酸缩水甘油酯(GMA)和乙二醇二甲基丙烯酸酯(EDMA)为前驱体制备了新型聚合物多孔涂层毛细管开管(PLOT)柱固定相。通过优化聚合反应时间、致孔剂比例及交联剂比例获得了色谱性能良好的PLOT柱,扫描电镜结果显示毛细管柱内的多孔涂层厚度适中且均匀。在毛细管电色谱模式下,PLOT柱以反相色谱分离机理有效分离了中性、酸性和碱性小分子。人血清白蛋白(HSA)共价结合的蛋白亲和PLOT柱对5对手性对映体实现了较好的分离,且其分离度远高于HSA修饰的单层聚合物毛细管开管柱。PLOT柱分离烷基苯的日内、日间和柱间的相对标准偏差分别小于1.7%、4.8%和7.8%。     

溶胶-凝胶法制备2,6-二丁基-β-环糊精毛细管柱用于气相色谱

以采用文献方法合成的化合物2,6-二丁基-β-环糊精为固定相,经溶胶-凝胶法制备了毛细管气相色谱柱。用此毛细管柱分离了难以分开的二甲苯的异构体、极性的胺类和醇类、以及非极性的烷烃类化合物。对此分离柱的色谱参数进行了测定,其不对称因子为1;柱效率是每米2 876块塔板;固定相的极性用麦氏常数之和表示是1 215;色谱分离保留时间的重现性用10次测定的相对标准偏差表示,其值小于0.3%。所有数据表明,该色谱柱性能优良。     

气相色谱法测定水样中硝基苯类化合物含量

提出了气相色谱法测定水样中硝基苯类化合物的含量的方法。水样经乙酸乙酯-苯-乙醚(2+1+0.02)混合溶剂提取,采用HP-1701毛细管色谱柱(30m×0.25mm,0.25μm)分离,用微电子捕获检测器测定。9种硝基苯类在11.5min内达到完全分离,其线性范围在质量浓度0.001～5.0mg.L-1之间。方法的回收率在92.0%～108%之间,测定结果的相对标准偏差(n=5)均小于5.0%。     

混合植物甾醇乙酰化物的反相高效液相色谱分析

应用高效液相色谱对豆甾醇乙酸酯、β_谷甾醇乙酸酯和混合甾醇乙酸酯进行了分析测定 ;实验采用的色谱柱为HypersilODS反相柱(4.6mm×150mm ,5μm) ,流动相为色谱纯甲醇 ,紫外检测波长为210nm ,恒溶剂洗脱 ;实验结果表明 ,混合植物甾醇及其乙酸酯的响应时间在25min以内 ,且各种甾醇及其酯的分离效果较好 ,采用峰面积归一法能够快速准确地测定混合甾醇中豆甾醇乙酸酯和 β_谷甾醇乙酸酯的含量。     

一种毛细管电色谱整体柱的制备及其在CEC-MS中的应用

本研究以烯丙基咪唑鎓β-环糊精(AI-β-CD)为功能单体,乙二醇二甲基丙烯酸酯(EDMA)为交联剂,采用原位聚合法制备了一种毛细管电色谱整体柱。优化制柱条件,通过红外光谱和扫描电镜对整体柱固定相的结构和形貌进行表征。以D,L-酪氨酸为分析物对整体柱性能进行评价。结果表明,所制备固定相成功键合到毛细管内,并形成错综复杂的网状结构。同时该整体柱具有较强的对映体分离能力及稳定性。应用毛细管电色谱与质谱联用技术对手性除草剂甲氧咪草烟对映体进行分离,分离度为2.25。     

原位聚合法制备碳十八甲基丙烯酸酯聚合物及其用作开管毛细管电色谱固定相

以十八碳醇甲基丙烯酸酯为单体、乙二醇二甲基丙烯酸酯为交联剂,采用原位聚合法合成了一种新型毛细管开管柱固定相,优化了毛细管开管柱的制备参数。柱内表面的电镜图像显示其具有多孔皱褶、质地均匀的结构特征。将其应用于甲苯、乙苯、丙苯、丁苯、戊苯和己苯的分离试验中,6种化合物达到了完全分离,出峰顺序与它们的疏水性一致,表明该柱有明显的疏水色谱作用。在10 mmol/L磷酸盐(pH 8.5,含50%(v/v)乙腈)流动相、16 kV电压下,该开管柱成功地分离了4种抗癫痫类药物,柱效范围为35300~49800 塔板/m,与空柱管相比分离效果明显提高。结果表明通过本实验的原位聚合法可制备具有反相色谱作用的有机基质碳十八开管毛细管电色谱柱。     

毛细管气相色谱法测定速冻食品中的山梨酸和苯甲酸

建立了速冻食品中山梨酸和苯甲酸的毛细管气相色谱检测方法。样品用石油醚-乙醚高速匀浆的方法提取后,通过改变酸度而改变其在有机相和水相中分配比的方法,去除脂肪等杂质的干扰,用FFAP毛细管色谱柱FID检测器进行检测。该方法测定结果的相对标准偏差为1.4%~6.6%,回收率为90.5%~96.9%,检出限为1mg/kg。     

乙二醇单乙醚醋酸酯合成用固体催化剂的筛选及催化作用分析

采用自建动态酯化反应实验装置，通过色谱分析测定了不同催化剂上乙二醇单乙醚醋酸酯合成反应的转化率－时间关系曲线。根据多种催化剂的活性及寿命，筛选出一种较为理想的锆基催化剂。该催化剂在实验条件下，反应２ｈ，转化率达９７％，对目标产生的选择性为１００％。     

Influence of alkoxyethanols on the mixed micelle formation by hexadecyltrimethylammonium bromide and tetradecyltrimethylammonium bromide surfactant mixtures

 The conductances of hexadecyltrimethylammonium bromide (HTAB) and tetradecyltrimethylammonium bromide (TTAB) mixtures over the entire mole fraction range of HTAB were measured in aqueous binary mixtures of ethylene glycol monomethyl ether, monoethyl ether, and monobutyl ether, and of diethylene glycol monomethyl ether and monoethyl ether containing 10–30 wt% additive in their respective binary mixtures at 30 °C. Each conductivity curve showed a single break over the whole mole fraction range of HTAB–TTAB mixtures. From the break in the conductivity curve, various micellar parameters were calculated and the results were discussed with respect to the alkoxyethanol's additive effect on the mixed micelle formation. The micellar parameters of HTAB, TTAB, and of their mixtures showed a strong dependence both on the amount as well as on the number of repeating units in the presence of ethylene glycol derivatives, whereas a significant dependence only on the amount of additive was observed in aqueous diethylene glycol derivatives. The results in the former case were attributed to the hydrophobic hydration of the mixed micelles by the ethylene glycol derivatives, which showed a large dependence on the increase in the alkyl chain length of the additive. The hydrophobic hydration was considerably reduced in the case of diethylene glycol derivatives owing to the presence of an extra ether oxygen. An evaluation of the nonideality in the HTAB–TTAB mixtures revealed that in spite of the strong hydrophobic hydration of the HTAB–TTAB mixtures by the alkoxyethanols, the mixed micelles remain almost free from the additive molecules. Received: 11 January 2000/Accepted: 14 April 2000     

Gas Chromatography–Mass Spectrometric Determination of Traces of Ether-Type Icing Inhibitors in Free-Floating Fuels

A gas chromatographic–mass spectrometric (GC–MS) assay method has been developed for simultaneous determination of ethylene glycol monomethyl ether (EGME) and diethylene glycol monomethyl ether (DEGME) in spilled aviation fuels. Ethylene glycol monobutyl ether (EGBE) and ethylene glycol monoethyl ether (EGEE) were used as internal standard and surrogate, respectively. Sample preparation consisted of back-extraction with 7 mL dichloromethane after extraction of 50 mL of fuel with 2 mL of water. The extract was concentrated to dryness, dissolved in 100 L methanol, and analyzed by GC–MS with selected-ion monitoring (SIM). The peaks had good chromatographic properties on a semi-polar column. EGME and DEGME were extracted from fuel with high recovery of 75 and 85%, with small variations, respectively. Method detection limits were 1.3 and 1.0 ng mL^–1 for EGME and DEGME, respectively, in spilled fuel. DEGME was detected at concentrations of 22.6 and 19.7 ng mL^–1 in two samples from among five free-floating samples collected in a tunnel of a subway station located in the vicinity of an army base in Korea. The method might be useful for differentiation between the fuel-types kerosene and JP-8, which might originate from a storage tank.     

A highly efficient layered double hydroxide catalyst for direct ethoxylation of butyl acetate to oligo‐ethylene glycol butyl ether acetates

A novel synthetic route that directly inserts ethylene oxide into butyl acetate without any labile hydrogen to produce oligo‐ethylene glycol butyl ether acetates is developed using an efficient acid–base bifunctional catalyst. The layered double hydroxide materials, which have structures similar to that of hydrotalcite, are synthesized using co‐precipitation methods. After modification by organic acid, the as‐prepared catalysts exhibit higher butyl acetate conversion and ethylene oxide catalytic activity with narrow ethylene glycol butyl ether acetate adduct distribution. Copyright © 2016 John Wiley & Sons, Ltd.     

Facile Synthesis of Tris(alkoxydimethylsilyl)methane Derivatives via Alcoholysis Under Open-Flask and Mild Conditions

The reactions between a variety of functionalized alcohols and tris(dimethylsilyl)methane, (HMe₂Si)₃CH, are described. Alcohols such as ethylene glycol monobutyl ether, ethylene glycol monoethyl ether, triethylene glycol monomethyl ether, 2-chloroethanol, 1-octanol, benzyl alcohol, glycidol, and allyl alcohol were converted in the presence of Karstedt's catalyst into the corresponding tris(alkoxydimethylsilyl)methanes, (ROMe₂Si)₃CH, in a convenient one-pot operation under aerobic conditions. The appearance of the products coincides with the generation of colloidal Pt(0) species. Moreover, poly(4-chloromethyl)styrene containing tris(dimethylsilyl)methyl groups reacts with benzyl alcohol or 2-chloroethanol in the presence of Karstedt's catalyst to give new macromolecules bearing tris(alkoxydimethylsilyl)methyl groups. The reaction rate is greatly influenced by the concentration of catalyst.     

气相色谱/质谱测定皮革及其制品中乙二醇醚类有机溶剂的残留量

建立了同时测定皮革及其制品中12种乙二醇醚类有机溶剂残留量的气相色谱/质谱-选择离子监测方法。以乙酸乙酯为萃取溶剂,在45℃下超声萃取皮革及其制品中的乙二醇醚类有机溶剂,萃取液经固相萃取柱净化后进行气相色谱/质谱-选择离子监测法测定,外标法定量。在信噪比（S/N）=3的条件下,乙二醇单乙醚（EGEE）的检出限为0.10 mg/kg,其余11种乙二醇醚类有机溶剂的检出限均小于0.05 mg/kg。在3个加标水平下,该方法的平均加标回收率为81.2%~95.5%,相对标准偏差（RSD）为1.4%~6.6%（n=9）。该方法简便快捷,灵敏度高,检出限远远低于欧盟法规《化学品的注册、评估、授权和限制》（REACH）的限量要求,适用于皮革及其制品中乙二醇醚类有机溶剂残留量的测定,为制定相关检测标准提供了参考。     

乙二醇二缩水甘油醚的合成及作为阳离子型紫外光固化稀释剂性能研究

以三氟化硼乙醚络合物为催化剂,以氢氧化钠为成环反应的闭环剂,利用乙二醇和环氧氯丙烷为原料合成了乙二醇二缩水甘油醚.研究了催化剂三氟化硼乙醚络合物用量、环氧氯丙烷和乙二醇摩尔比、氢氧化钠和乙二醇摩尔比,以及成环反应温度这些因素对合成反应的影响.结果表明较好的合成反应条件是:三氟化硼乙醚络合物质量分数为0.40%,环氧氯丙烷和乙二醇较佳摩尔比为2.4:1,氢氧化钠和乙二醇较佳摩尔比为2.2:1,较佳的成环反应温度为30℃.同时,把乙二醇二缩水甘油醚作为稀释剂加入到环氧树脂E-51中,利用三芳基锍鎓六氟锑酸盐作为引发剂,制备了阳离子型紫外光固化涂料,其紫外光固化膜的拉伸强度为46.25MPa,杨氏模量为1487.26MPa,断裂伸长率为6.27%.     

Effect of adding glycols to the micellar properties of Tween: small-angle neutron scattering and turbidity measurements

Small-angle neutron scattering (SANS) and turbidity measurements have been carried out on the nonionic surfactants Tween 20 and Tween 80, in the presence of diethyleneglycol (DEG), triethyleneglycol (TEG), ethylene glycol monoethyl ether (EGMEE), and ethyleneglycol mono butyl ether (EGMBE). SANS measurements show that the shapes of the Tween 20 and Tween 80 micelles are oblate ellipsoidal, which do not change predominantly in the presence of DEG and TEG. However, the presence of EGMBE and EGMEE reduces the aggregation number of Tween. This has been attributed to the solubilization of EGMBE and EGMEE in the Tween micelles, providing them with additional hydrophobicity.     

Synthesis of hydroxyl containing N-imides of 4-substituted naphthalic acid

A convenient, one-step method for synthesis of the N-(3-hydroxypropyl)imide of 4-(3′-hydroxypropyl)-aminonaphtalic acid is proposed. It has been found that ethylene glycol monoethyl ether can be successfully used to replace solvents previously used for these reactions. Institute of Monocrystals, Ukrainian Academy of Sciences, Kharkov 310001. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 5, pp. 692–695, May, 1999.     

A library of thermoresponsive PEG-based methacrylate homopolymers: How do the molar mass and number of ethylene glycol groups affect the cloud point?

In this study, a novel library of thermoresponsive homopolymers based on poly (ethylene glycol) (EG) (m)ethyl ether methacrylate monomers is presented. Twenty-seven EG based homopolymers were synthesized and three parameters, the molar mass (MM), the number of the ethylene glycol groups in the monomer, and the chemistry of the functional side group were varied to investigate how these affect their thermoresponsive behavior. The targeted MMs of these polymers are varied from 2560, 5000, 8200 to 12,000 g mol⁻¹. Seven PEG-based monomers were investigated: ethylene glycol methyl ether methacrylate (MEGMA), ethylene glycol ethyl ether methacrylate (EEGMA), di(ethylene glycol) methyl ether methacrylate (DEGMA), tri(ethylene glycol) methyl ether methacrylate (TEGMA), tri(ethylene glycol) ethyl ether methacrylate (TEGEMA), penta(ethylene glycol) methyl ether methacrylate (PEGMA), nona(ethylene glycol) methyl ether methacrylate (NEGMA). Homopolymers of 2-(dimethylamino) ethyl methacrylate (DMAEMA) were also synthesized for comparison. The cloud points of these homopolymers were tested in different solvents and it was observed that it decreases as the number of EG group was decreased or the MM increased. Interestingly, the end functional group (methoxy or ethoxy) of the side group has an effect as well and is even more dominant than the number of EG groups.