Novel glycerol dialkanol triols in sediments: transformation products of glycerol dibiphytanyl glycerol tetraether lipids or biosynthetic intermediates?

A glycerol dialkanol triol, similar in structure to glycerol dibiphytanyl glycerol tetraethers but devoid of the carbon atoms of one of the two glycerol termini, has been identified in Messinian sediments (~6 Ma) and characterised using quadrupole ion trap and Fourier transform-ion cyclotron resonance liquid chromatography-tandem mass spectrometry.     

Synthesis of polyfluoroalkylated glycerol and crown ether

Perfluoroalkylated glycerol (5, 9) and crown ethers (22, 23, 24) were synthesized starting from glycerol. 5 was synthesized by allylation of glycerol 1,2-acetonide followed by perflu-oroalkylation initiated with sodium dithionite, reduction of iodide and hydrolysis in good overall yield and was shown to poccess good surface activities. Glycerol bis-ether (9) was synthesized in a similar way. Allyloxymethyl crown ethers (15, 16, 18) were prepared as key intermediates through multi-step reactions, which were then perfluoroalkylated to give the title crown ethers 22, 23 ,24.     

A catalyst-free synthesis of α-aminophosphonates in glycerol

A simple and efficient method is described using glycerol as a solvent in the catalyst-free synthesis of α-aminophosphonates in high purity. Products are prepared by the Kabachnik–Fields reaction from amines, phosphites, and carbonyl compounds. The method does not require a toxic catalyst.     

Dehydration of glycerol with silica–phosphate-supported copper catalyst

Research on Chemical Intermediates - Silica–phosphate-supported copper catalyst was prepared by neutralization of sodium silicate with orthophosphoric acid followed by the addition of copper...     

Resolution of β-unsaturated amines with isopropylidene glycerol hydrogen phthalate

1-Phenyl-2-propenylamine 2, 1-phenyl-2-propinylamine 3, 1-(1-cyclohexenyl)ethylamine 4, (E)-2-ethylidenecyclohexylamine 5 and α-methylallylamine hydrochloride 6 were selected as candidates for resolution with isopropylidene glycerol hydrogen phthalate 1, previously described as an efficient resolving agent of 1-arylalkylamines. With only the exception of 5, all these substrates were resolved by (S)-1. In particular both the enantiomers of 2 and 3 were obtained in excellent yields and with very high enantiomeric excesses. The absolute configurations of non-racemic forms of 2, 3 and 4, not prepared before except those of 3, were established by correlation with the respective hydrogenation products. The enantiomeric excesses of all the resolved substrates were accurately determined by chiral HPLC analysis. The fact that 1 resolves 4 and 6 but not their saturated analogues and shows higher efficiency in resolving 2 and 3 than 1-phenylpropylamine indicates the positive influence of the presence of β-unsaturation on the resolvability of aminic substrates with such an acid.     

Hydrogenolysis of glycerol to propanediols over supported Ag–Cu catalysts

Hydrogenolysis of glycerol to 1,2-propanediol and 1,3-propanediol has significant scientific importance and commercial interest due to the huge surplus of glycerol and the various application of propanediols. A series of supported Ag–Cu catalysts synthesized by impregnation method were studied for hydrogenolysis of glycerol to propanediols. The catalysts were characterized by H₂-TPR, NH₃-TPD, XRD, BET, N₂O chemisorption, TG, ICP and SEM. It was observed that the loading of 5% Ag–Cu-based catalysts facilitated the reduction, surface acidity and dispersion of the Cu particles, which improved the conversion of glycerol and promoted the generation of propanediols. It was also found that when loading Ag and Cu simultaneously on Al₂O₃, the catalyst had a better performance for the reaction because of the higher acidity, dispersion and surface area of the Cu species on the catalyst surface. In addition, effects of metal concentrations, metal impregnation sequence, reaction temperature, reaction pressure, reaction time, solvent and pH value of the solution on glycerol hydrogenolysis together with the recyclability of catalyst were investigated in detail. The optimal 5Ag–15Cu/Al₂O₃ achieved 66.4% glycerol conversion with 68.2% 1,2-propanediol and 3.1% 1,3-propanediol selectivity at 200 °C under 3.5 MPa in ethanol for 8 h.     

Effect of glycerol on the optical and physical properties of sol–gel glass matrices

Glass samples are prepared with different amount of glycerol as drying control chemical additive (DCCA) via acid catalysed sol–gel method. These samples are given solvent treatment namely rinse and dip with methanol while drying of the sample. In rinse treatment solid sample is rinsed with small amount of methanol while in dip treatment sample is dipped for 5 h in methanol. Comparative studies of these treated samples containing varied DCCA concentration are carried out by measuring optical transmission, mechanical strength and bulk density. Various instrumental techniques used for analysis are FTIR, DTA-TGA, XRD, SEM and TEM. The untreated samples take long time to dry up and to come out of the cuvette and show very less transmission in UV region which is much enhanced by solvent treatment. On the basis of this study, the solvent treated glass samples with DCCA amount 8 ml in the composition used are found to have the maximum UV transmission, good mechanical strength and may be useful as silica gel host matrices for solid state dye lasers and other applications. The UV transmission reported in the present studies is 90% in 337 nm region, which is the wavelength of N₂ laser pumping.     

Growth of porous anodic alumina films in hot phosphate–glycerol electrolyte

Growth of porous anodic alumina films has been examined at 10 V in hot phosphate-containing glycerol electrolyte containing 0.1 to 0.57 mass% water. The growth rate of the films is highly dependent upon the water content of the electrolyte, reducing markedly at a water content of 0.1 mass%, an opposite trend to that found previously for the formation of porous films on titanium and niobium. Chemical dissolution of the anodic alumina is also suppressed in electrolyte of low water content. GDOES depth profiles revealed that an increased water content of the electrolyte promoted the incorporation of phosphorus species into the films, although chemical dissolution reduced the amounts of phosphorus in the outer regions. Carbon species also appeared to be present in films, particularly at lower water content. Using a niobium oxide outer layer to suppress chemical dissolution resulted in films that were about 1.2 times the thickness of the consumed aluminium for an electrolyte containing 0.25 mass% water. The expansion suggests a possible contribution of field-assisted flow of film material in the growth of the porous anodic film.     

Pd-modified PEDOT layers obtained through electroless metal deposition—electrooxidation of glycerol

Pd-poly(3,4-ethylenedioxythiophene) (PEDOT)-based electrocatalytic materials are obtained by coupling Pd ion reduction with oxidation of pre-reduced PEDOT coatings. Electroless metal deposition is carried out in single or triple electroless deposition steps resulting in Pd NPs with mean size ranging between 12 and 22 nm, respectively. The proposed method of dispersing the Pd catalytic phase provides the opportunity to obtain high electrocatalytic currents with Pd loadings as low as 10 μg cm^?2. The Pd-PEDOT catalyst obtained by triple-step metal deposition shows stable voltammetric behavior with respect to glycerol oxidation in alkaline solution. The established mass activity is between the highest values achieved at Pd-electrocatalysts without involving additional electrocatalytic materials or special supports.     

Synthesis of glycerol carbonate with high surface area ZrO2–KOH catalyst

High surface area ZrO₂–KOH sample was prepared and used the catalyst for the synthesis of glycerol carbonate (GC) from dimethyl carbonate (DMC) and glycerol. The structure properties of ZrO₂–KOH were characterized by XRD, BET, CO₂-TPD, XPS, and ICP-OES. It was found that the strong basicity of ZrO₂–KOH might be attributed to the oxygen vacancies as well as the big surface area. Experiments were developed to evaluate the effects of catalysis loading, proportion of reactants, temperature and reaction time on the conversion of glycerol to GC. The consequences showed that ZrO₂–KOH was a highly efficient basic catalyst for synthesis of GC from glycerol. The catalytic performance of ZrO₂–KOH is much better than that of ZrO₂–KOH–CP, ZrO₂–NH₄OH, and some reported heterogeneous catalysts. And the higher performance of ZrO₂–KOH was ascribed to the strong basicity. 99.43% conversion was obtained in a particular situation of catalyst/glycerol weight ratio of 3 wt%, DMC/glycerol molar ratio of 3:1, reaction temperature of 80 °C, and reaction time of 2 h. The plausible reaction mechanism for the transesterification on the strong basic active sites was discussed.

     

Base-free aerobic oxidation of glycerol on TiO_2-supported bimetallic Au–Pt catalysts

The aerobic oxidation of glycerol provides an economically viable route to glyceraldehyde, dihydroxyacetone and glyceric acid with versatile applications, for which monometallic Pt, Au and Pd and bimetallic Au–Pt, Au–Pd and Pt–Pd catalysts on Ti O2 were examined under base-free conditions. Pt exhibited a superior activity relative to Pd, and Au–Pd and Pt–Pd while Au was essentially inactive. The presence of Au on the Au–Pt/Ti O2 catalysts led to their higher activities(normalized per Pt atom) in a wide range of Au/Pt atomic ratios(i.e.1/3–7/1), and the one with the Au/Pt ratio of 3/1 exhibited the highest activity. Such promoting effect is ascribed to the increased electron density on Pt via the electron transfer from Au to Pt, as characterized by the temperature-programmed desorption of CO and infra-red spectroscopy for CO adsorption. Meanwhile,the presence of Au on Au–Pt/Ti O2, most like due to the observed electron transfer, changed the product selectivity, and facilitated the oxidation of the secondary hydroxyl groups in glycerol, leading to the favorable formation of dihydroxyacetone over glyceraldehyde and glyceric acid that were derived from the oxidation of the primary hydroxyl groups. The synergetic effect between Au and Pt demonstrates the feasibility in the efficient oxidation of glycerol to the targeted products, for example, by rational tuning of the electronic properties of metal catalysts.     

Role of preparation parameters of Cu–Zn mixed oxide catalyst in solvent free glycerol carbonylation with urea

Solvent-free carbonylation of glycerol with urea to glycerol carbonate (GC) was achieved over heterogeneous Cu–Zn mixed oxide catalyst. Cu–Zn catalysts with different ratios of Cu:Zn were prepared using co-precipitation (CP) and oxalate gel (OG) methods. As compared to CuO–ZnO(2:1) catalyst prepared by oxalate gel (OG) method, much higher conversion of glycerol and highest selectivity towards glycerol carbonate (GC) was achieved with CuO–ZnO_CP(2:1) catalyst. Physicochemical properties of prepared catalysts were investigated by using XRD, FT-IR, BET, TPD of CO₂ and NH₃ and TEM techniques. The effect of stoichiometric ratio of Cu/Zn, calcination temperature of CuO–ZnO catalysts and effect of reaction parameters such as molar ratio of substrates, time and temperature on glycerol conversion to GC were critically studied. Cu/Zn of 2:1 ratio, glycerol–urea 1:1 molar ratio, 145 ​°C reaction temperatures were found to be optimized reaction conditions to achieve highest glycerol conversion of 86% and complete selectivity towards GC. The continuous expel of NH₃ from reaction the mixture avoided formation of ammonia complex with CuO–ZnO catalyst. As a result of this, CuO–ZnO catalyst could be recycled up to three times without losing its initial activity.     

Characterization and phase transition study for vesicles of fluorocarbon amphiphiles with 1,3-disubstituted glycerol structure

This paper presents the preparations and characterization of vesicles of four new fluoro-carbon amphiphiles with 1,3-disubstituted glycerol structure in common and different headgroups(OH, 1; CO_2H, 2; quaternary ammonium salt, 3; and pyridinium salt, 4). These vesicles havehigher transition temperature due to the stronger hydrophobic interaction between fluorocarbonchains. Addition of fluorocarbon additives with carboxylic acid or quaternary ammonium salt headgroup respectively shows different influences on phase behavior of vesicles of 2. These results arediscussed based on the interaction within headgroup, hydrophobicity and specific mutahydrophobicinteraction between fluoro- and hydrocarbon chains.     

Experimental investigation of the effect of an external magnetic field on the thermal conductivity and viscosity of Fe3O4–glycerol

Journal of Thermal Analysis and Calorimetry - Thermophysical properties, such as thermal conductivity and viscosity, of magnetic nanofluids (MNFs) can be enhanced by applying external magnetic...     

Heterogeneous interaction between zwitterions of amino acids and glycerol in aqueous solutions at 298.15 K

The enthalpies of mixing of six kinds of amino acid (glycine, L-alanine, L-valine, L-serine, L-threonine, and L-proline) with glycerol in aqueous solutions and the enthalpies of diluting of amino acid and glycerol aqueous solutions have been determined by flow microcalorimetry at 298.15 K. Employing McMillan–Mayer theory, the enthalpies of mixing and diluting have been used to calculate heterogeneous enthalpic pairwise interaction coefficients (h _xy ) between amino acids and glycerol in aqueous solutions. Combining h _xy values of amino acids with glycol in the previous study, the variations of the h _xy values between amino acids and glycerol have been interpreted from the point of view of solute–solute interactions.     

Molar conductivities of concentrated lithium chloride–glycerol solutions at low and high temperatures: application of a quasi-lattice model

Conductivities of concentrated solutions of lithium chloride in glycerol were measured for concentrations ranging from 0.005 to 1.5 mol.dm^?3. The conductivity dependencies were analysed successively using the Debye–Huckel–Onsager limiting law (DHO) at very low concentrations, the Fuoss equation of 1978 up to 0.1 mol.dm^?3, the Casteel–Amis empirical equation and the quasi-lattice model (QLM) at moderate and higher concentrations. The molar conductivities at infinite dilution, obtained using DHO and QLM were quite different from each other, because the salt forms contact pairs which were underestimated in the Λ = f(C^1/3) in QLM, as it may well be proved by Raman spectroscopy. Besides, the value of Madelung constant suggests that LiCl crystallises face centred cubic (FCC) at higher concentrations. On the basis of Raman spectroscopy analysis of previous lithium salts, we assume that the dissociation coefficient varies slightly with concentration and fraction of paired ion constant, the QLM equation is applied successfully in the concentration range used in this study. The temperature dependency of conductivity was also described using the Vogel–Tamman–Fulcher (VTF) empirical equation where the Arrhenius type was found. The results also suggest that as NaCl, LiCl can be considered as a structure maker electrolyte.     

Improved synthesis of disaccharides with Escherichia coli β-galactosidase using bio-solvents derived from glycerol

A noticeably increase in activity, keeping total regioselectivity was found in the synthetic behaviour of Escherichia coli β-galactosidase in glycerol-based solvents using a 1:7 molar ratio of donor (pNP-β-Gal): acceptor (GlcNAc). Yields of up to 97% of β(1→6) with different solvents were found. These reactions take place without noticeable hydrolytic activity and with total regioselectivity, representing a considerable improvement over the use of aqueous buffer or conventional organic solvents. There is a clear dependence of the catalytic results on the solvent structure, which is analysed in terms of polarity and hydrophobicity.     

Viscosity and surface tension of glycerol + N-methyl-2-pyrrolidone mixtures from 293 to 323 K

The viscosity and surface tension of binary mixtures of glycerol (1) + N-methyl-2-pyrrolidone (2) at T = 293, 298, 303, 308, 313, 318, and 323 K and at atmospheric pressure are reported. The Jouyban–Acree model was used for mathematical correlation of measured data. The average percentage deviation was used as an accuracy criterion. Derived properties from measured thermophysical properties, including deviations in viscosity and surface tension; the enthalpy, entropy and Gibbs energy of flow activation; standard enthalpy and entropy of surface formation data were reported.     

Fe doped aluminoborate PKU-1 catalysts for the ketalization of glycerol to solketal: Unveiling the effects of iron composition and boron

An inexpensive Fe doped aluminoborate consisted of 18% Fe in PKU-1 material that exhibits high selectivity of 4-hydroxymethy-2,2-dimethyl-1,3-dioxolane(Solketal, 98.3%), considerable activity(TOF 51.7 h-1),and recyclable ability in the ketalization of glycerol to Solketal with acetone at 318 K has been developed.Our study demonstrated that the structure of Fe(less agglomerated iron species vs. Fe Oxclusters) can be tuned by changing Fe loading in the PKU-1 material, which correlated well with ex...     

Enantioselective synthesis of natural biologically active ivaide A: 1,3-di-(R)-β-hydroxy-glyceride glycerol

The natural 1,3-di-β-hydroxy-glyceride glycerol ivaide A 1 from Ajuga iva has been synthesised by diacylation of dihydroxyacetone with 3-hydroxyhexadecanoic acid, followed by reduction to the corresponding glycerol derivative. The enantiomerically pure (R)-β-hydroxyhexadecanoic ester intermediate 6 was obtained by a coupling reaction of an ethylacetoacetate dianion and the corresponding bromoalkyl, followed by the known reduction of the resulting β-ketoester 5 by fermenting baker's yeast.