Synthesis of Novel Discotic C60-triphenylene Derivative by 1, 3-Dipolar Cycloaddition

1 IntroductionFullerene has received considerable attention and a great researching interest due to its unique structure and interesting properties[1-3].Many functional groups have been introduced,often region-or stereo-selectively,for tuning the physical properties of C60 and for constructing supramolecular architectures[4-6].Among all kinds of C60 derivatives,the diseotic molecule-substituted C60 derivatives show interesting properties,especially,liquid crystal properties.Up to now,few C60 derivatives with discotic-molecular groups and their liquid crystal properties have been studied.In 1996,Deschenaux et al.[7]reported the first mesomorphic C60-ferrocene derivative.Tian et al.[8]synthesized a C60-perylene derivative in 2004.Nakanishi et al.[9]prepared a series of uncommon liquid C60derivatives with 2,4,6-tris(alkyloxy)benzal groups in 2006.Lately,Geerts et al.[10]described the synthesis of mesogenic phthalocyanine-C60.     

Research on successive preparation of nano-FeNi alloy and its ethanol sol by pulsed laser ablation

Since Ogale et al.[1,2] firstly prepared metastable matter by pulsed laser ablation at the solid target sub-merged in liquid, there has been a great interest in it. Tokura et al.[3] prepared carbon films in the water by pulsed laser ablation. Zheng et al.[4—6] prepared nano and cluster matters with different shapes through pulsed laser ablation at interface of liquid and solid target. Yang et al.[7,8] prepared cube nano-nitride boron crystalloid and nano-diamond crystalloid with the same meth…     

A Novel Ternary Complex of Europium(Ⅲ) for Eletroluminescent Device

IntroductionSince Tang[1] and Adachi et al.[2 ] reportedtheir double- and triple- layered devices,organicelectroluminescent(EL ) devices have attracted agreat interest due to their efficient emission in thevisible region and their possible application to flatpanel full color display.Among red- emissionorganic materials,europium complexes haveattracted researchers intense attention[3— 10 ]because the sharp emission band of Eu- complexeshas demonstrated the advantage of a very sharp ELemissio…     

A New Orthorhombic Phase of ZrW1.6Mo0.4O8 at Ambient Pressure

IntroductionZr W2 O8presents a few models of structures.The first report was made by Graham etal.[1] andconfirmed by Chang et al.[2 ] in the pseudobinaryphase diagram of a Zr O2 - WO3 system atatmospheric pressure.Cubic zirconium tungstate,Zr W2 O8,possesses the acentric P2 13 structure( αform,a=0 .91 5 75 nm at 2 93K) [3 ] and istransformed to the disordered centric Pa3structure(β form,a =0 .91 371 nm,at 483 K) [3 ] .Theprecise transition temperature ofα toβ form is448K determined …     

Studies on Rate Enhancement of Polymerization in NMRP

IntroductionNitroxide-mediated polymerization is the best ex-ample of stable free-radical polymerization(SFRP),which was first proposed by Rizzardoet al.[1]and waslater developed by Georgeset al.[2,3]and Hawker[4].In the presence of a nitroxide such as2,2,6,6-tetra-methylpiperidine-oxyl(TEMPO),the free radical poly-merization of styrene(St)proceeds with a polydispersitybelow1.3.Unfortunately,up to now,the long reactiontime and the high price of SFRP are the main draw-backs of this react…     

Time-dependent wave packet approach to the pulse delay effect upon RbI photoelectron spectrum

In recent years, the field-matter interaction has be- come an interesting topic of many dynamical calcula- tions[1―9]. In order to investigate the interaction con- veniently, the concept of light-induced potential is introduced and applied to study the photoionization and photodissociation of molecules by many research- ers[10―12]. For example, using the light-induced poten- tial, Garraway and Suominen[10] and Zavriyev et al.[11] studied the process of transferring of a wave packet from one…     

Synthesis of 3-(1-Cyclohexenyl)-2-butanone via Environmentally Friendly Catalysts

Introduction3- ( 1 - Cyclohexenyl) - 2 - butanone( CHB) is oneofthe importantchemicals and has a potential valuein perfume industry.Beak et al.[1] reported thatthe acylation of ethylidenecyclohexane( EDC) withzinc chloride as a catalystgave3- ( 1 - cyclohexenyl) -2 - butanone in a good yield,butthey have notmadea more detailed investigation.The use of such aconventional catalyst as zinc chloride leads to anumber of problems such as corrosion,unclean re-action products and the disposal of pot…     

Open-framework Borophosphate:(NH4)_(0.5)Fe~II_(0.5)Fe~III_(0.5)(H_2O)_2BP_2O_8·0.5H_2O

We are investigating the synthesis and properties of a new class of open framework borophosphate solids with the goal of being able to use in optical devices and magnetic materials. Only a few open-framework ferric borophosphate compounds with a chiral tetraheda-tetraheda helices, KFe(H2O)2BP2O8)H2O(1), Fe(H2O)2BP2O8H2O(2), (NH4)0.4-FeII0.55FeIII0.5(H2O)[BP2O8]0.6H2O(3) have been reported by Boy et al.1, Ylmaze et al.2 and Huang and Schfer et al.3. However, Huang and Schfer et…     

Low-temperature catalytic preparation of multi-wall MoS_2 nanotubes

Since the first report on inorganic fullerene-like WS2 polyhedra and nanotubes by Tenne et al.[1] in 1992, this kind of nanostructural materials have become extensive research topics owing to their unique electronic structures. WS2 and MoS2 nanomaterials have shown potential applications in the fields of scanning probe microscopy[2], solid-state lubrication[3], heterogeneous catalysis[4], and electrochemical hydrogen storage[5]. Up to now, a great deal of progress has been achieved in the st…     

以TiCl4为钛源合成钛硅分子筛

Since titanium silicalite-1 (TS-1) was first prepared by Taramasso et al[1] in 1983,the synthesis of TS-1 and its application in partial oxidation have become a hotspot in the zeolite catalytic field.For the traditional synthesis route of TS-1,the key problem is its costly price and severe synthesis conditions,which hamper its industrial application.To avoid using costly alkali-free tetrapropylammonium hydroxide (TPAOH) as a template,Müller et al[2] reported that TS-1 could be synthesized using tetrapropylammonium bromide (TPABr) as a template with ammonia as the base to adjust the basicity of the gel.     

The interaction between atoms of Au and Cu with clean Si(1 1 1) surface: A study combining synchrotron radiation grazing incidence X-ray fluorescence analysis and theoretical calculations

In order to evaluate the interactions between Au/Cu atoms and clean Si(1 1 1) surface, we used synchrotron radiation grazing incidence X-ray fluorescence analysis and theoretical calculations. Optimized geometries and energies on different adsorption sites indicate that the binding energies at different adsorption sites are high, suggesting a strong interaction between metal atom and silicon surface. The Au atom showed higher interaction than Cu atom. The theoretical and experimental data showed good agreement.     

Effect of spin polarization for hydrogen adsorbed on Si(111)(1×1) surface: First‐principles calculations

The role of spin polarization on adsorption of atomic and molecular hydrogen on Si(111)(1×1) surface is examined by comparing the results of the local spin density approximation (LSD) and those of the local density approximation (LDA). A large improvement of the adsorption energies (around 0.8 eV/H) was found for the H atom adsorbed on Si(111)(1×1) surface. The inclusion of spin polarization reduces the overbinding between the H atom and the silicon surface and its effect is much more pronounced when the H atom is far away from the surface. Despite of the large changes in the adsorption energies, the main character of the potential energy surface of the H atom on Si(111)(1×1) surface is retained. An opposite effect is found in the charge‐density‐transfer map of LSD results as compared to LDA results for the H atom approaching the surface through the H3 path, in which the H atom loses electrons rather than gains electrons from the surface. The fact that the H atom tends to lose electrons in the silicon bulk has already been reported by the experimental studies for the behavior of the H atom in the p‐type silicon. For the molecular hydrogen on Si(111)(1×1) surface, the effect of the spin polarization is so small that it can be neglected. © 2000 John Wiley & Sons, Inc. Int J Quant Chem 79: 47–55, 2000     

Reaction of 1,2-dibromobenzene with the Si(111)-7x7 surface, a DFT study

Reaction between 1,2-dibromobenzene and the Si(111)-7x7 surface has been studied theoretically on the DFT(B3LYP/6-31G(d)) level. A 12-atom silicon cluster, representing two adatoms and one rest atom of the faulted half of the unit cell, was used to model the silicon surface. The first step of the reaction was a covalent attachment (chemisorption) of an intact 1,2-dibromobenzene molecule to the silicon cluster. Binding energies were calculated to be between 1.04 and 1.14 eV, depending on the orientation of the molecule. A second step of the reaction was the transfer of the Br atom to the silicon cluster. Activation energies for the transfer of the Br atom were calculated to be between 0.4 and 0.6 eV, suggesting that the thermal bromination reaction occurs on a microsecond time scale at room temperature. A third step of the reaction could be the transfer of the second Br atom of the molecule, the desorption of the organic radical, or the change of the adsorption configuration of the radical, depending on the original orientation of the adsorbed intact molecule. A novel, aromatic, two-sigma-bound adsorbed configuration of the C6H4 radical, in which a carbon ring of the radical is perpendicular to the silicon surface, has been introduced to explain previous experimental observations (Surf. Sci. 2004, 561, 11).     

Quantum-chemical cluster modeling of the interaction of fluorine atoms with the (111) surface of silicon

The interaction of atomic fluorine with the Si(111) face was studied by the MNDO method. The energies of adsorption of the fluorine atoms on the surface as well as the values of the barriers to its incorporation and desorption from the subsurface layer of silicon were calculated taking into account the surface structure relaxation. It was found that a chemical bond is formed between the fluorine atom incorporated into the silicon and the adjoining surface silicon atom.Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 28, No. 3, pp. 247–252, May–June, 1992.The authors wish to express their gratitude to P. A. Aleksandrova for fostering interest in the investigation and for her helpful suggestions.     

密度泛函理论研究十二烷硫醇在Au(111)面上的吸附

采用第一性原理方法研究了十二烷硫醇(C₁₂H₂₅SH)分子在Au(111)面上未解离和解离吸附的结构、能量和吸附性质,在此基础上分析判断长链硫醇分子在Au(111)面吸附时S―H键的解离, 以及分子链长度对吸附结构和能量的影响. 计算了S原子在不同位置以不同方式吸附的系列构型, 结果表明在S―H键解离前和解离后,均存在两种可能的表面结构, 直立吸附构型和平铺吸附构型; 未解离的C₁₂H₂₅SH分子倾向于吸附在top位, 吸附能为0.35-0.38 eV; H原子解离后C₁₂H₂₅S基团倾向于吸附在bri-fcc位, 吸附能量为2.01-2.09 eV. 比较分析未解离吸附和解离吸附, 发现C₁₂H₂₅SH分子未解离吸附相较于解离吸附要稳定, 未解离吸附属于弱化学吸附.局域电子态密度和差分电荷密度分析进一步验证了S―H解离后S原子与表面之间成键的数目增加, 而且键合更强. 同时我们发现长链硫醇的吸附能量较短链硫醇的吸附能量略大, S原子与表面Au原子之间的距离略小.     

Diffusion by chemical bond hopping of single O2 and H on Si(111)-7×7 surfaces

Using a variable temperature STM to trace in detail the path of single particle movement, it is possible to derive diffusion parameters of individual atoms and molecules on solid surfaces as well as to probe the mechanisms. Below ˜370 °C, O₂ molecules adsorb on Si(111)-7×7 surfaces at the top site of Si-adatoms as bright image spots. An O₂ molecule can hop between two adatom sites within the half unit cell it adsorbs via two rest-atom sites. Above this temperature, it can either hop out of the half cell, or can go through other reaction pathways. In contrast, for H atoms, the adsorption sites are rest-atom sites. An H atom darkens the rest-atom in filled state image, but the surrounding adatoms will appear brighter because of a reverse charge transfer. Above ˜280 °C, it can hop to a neighbor rest atom site within the half cell via an adatom site. The adatom in the short lived intermediate state appears darker because of the saturation of its dangling bond. Above ˜340 °C, it can hop out of the half cell via two adatom sites. Thus diffusion of H and O₂ on this surface is achieved by hopping of chemical bonds via intermediate states. We have also derived site and pathway-specific activation energies and frequency factors and the potential energy curves for the hopping of O₂ and H on Si(111)-7×7 surfaces.     

第一性原理模拟氢气分子在氧化硅团簇上的吸附

基于密度泛函理论,采用广义梯度近似(GGA)分析了H2分子吸附在氧化硅团簇上的几何结构、电子性质以及吸附能.结果发现:H2分子与Si3O4团簇相互作用时,H2分子被分解,游离的H原子优先吸附在末端Si原子上,表明Si3O4团簇体系对氢气的存储主要依赖于末端存在悬挂键的Si原子,接着H2分子才以分子的形式以较小吸附能吸附在Si3O4H4团簇上.氢气分子主要引起与其邻近的原子电荷的重新分布.该团簇体系的红外、拉曼光谱图有效地鉴定了H2分子的吸附状态,为理论上确定团簇的稳定结构和实验上对观测结果的分析提供有力的途径.     

A Density Functional Theory Study on the Adsorption of CN on Ni(111) Surface

1 INTRODUCTION Cyanide, CN, is an important free-radical mole-cule of one carbon chemistry, organic chemistry, free-radical chemistry and cosmochemistry. And the im-portant industrial processes, such as the Andrussovreaction, depend on the reactivity of CN bond[1]. Thechemistry of cyanide is also important in the surfacechemistry of a number of C- and N-containing sys-tems[1, . During the past decade, the adsorption of 2]CN and CN-containing molecules on transition metalsurfa…     

应用理论计算研究MCM-22分子筛相邻酸性位上乙烯和苯的吸附

应用ONIOM计算方法研究了MCM-22分子筛超笼12元环上存在两个酸性位时的酸强度及其与骨架铝之间距离的关系,并研究了乙烯和苯分子吸附的规律.计算采用52T簇模型和B3LYP/6-31G**/MNDO方法.结果表明,存在两个酸性位且两个骨架铝之间间隔1个骨架硅时,酸强度比孤立的酸性位明显降低;当间隔的硅原子数增加时,酸强度呈上升趋势,间隔3个以上骨架硅时,其酸强度与孤立的酸性位几乎没有差别.对于乙烯的吸附,当两个骨架铝之间间隔1~4个骨架硅时,其吸附能几乎没有差别(31~35 kJ/mol);对于苯的吸附,当两个骨架铝之间间隔1个骨架硅时,其吸附能有所提高,因为两个桥羟基同时对苯分子产生氢键吸附作用.当两个骨架铝之间的距离增大时,苯的吸附能几乎相同(21~29 kJ/mol).若两个乙烯分子或苯分子同时吸附在双酸性位上,其吸附能与单个分子在孤立酸性位吸附时几乎没有差别.应用自然键轨道计算分析了吸附配合物的电子结构,进一步探明了乙烯和苯在分子筛酸性位上吸附的本质.     

Adsorption and Diffusion of Hydrogen Atom on Low-index Ag Planes

1 INTRODUCTION The interaction of hydrogen with metal surfaces has been extensively investigated experimentally and theoretically[1] motivated by its technological im- portance as well as theoretical attractiveness. Studies have sought to identify and explain the induced struc- tural, electronic and chemical perturbations which accompany hydrogen physisorption and chemisorp- tion on well-characterized metal substrates. However, the interaction of hydrogen atoms with Ag surfaces has not r…