Highly sensitive spectrophotometric determination of cobalt using o-hydroxyhydroquinonephthalein and hydrogen peroxide in the presence of mixed surfactants

Summary The effects of cobalt(II) and surfactants on the decomposition of various xanthene dyes by hydrogen peroxide have been systematically investigated. A simple and highly sensitive spectrophotometric determination of cobalt(II) (0.05 1.2 g/10 ml) is proposed. The method is based on the catalytic effect of cobalt(II) on the oxidation of o-hydroxyhydroquinonephthalein (Qnph) by hydrogen peroxide. The proposed catalytic spectrophotometric determination was sensitive, selective, reproducible and virtually unaffected by the presence of other ions; the effective molar desorptivity was 4.2×10⁸ l/mol per cm, Sandell sensitivity was 0.15 pg/cm², and the relative standard deviation was 3.2% at 0.6 ng/10 ml (n=5). The selective assays of cobalt(II) in water samples were also investigated with satisfactory results (95% 101%).

---

Hochempfindliche Spektralphotometrische Kobaltbestimmung mit Hilfe von o-Hydroxyhydrochinonphthalein und Wasserstoffperoxid in Gegenwart von oberflÄchenaktiven Substanzen

---

Application of xanthene derivatives in analytical chemistry. Part LXIX. Part LXVIII see ref. [1]     

A rapid method for the spectrophotometric determination of palladium(II) and osmium(VIII)

Propionyl promazine phosphate is proposed as a new reagent for the rapid spectrophotometric determination of microgram amounts of Pd(II) and Os(VII). PPP instantaneously forms an orange-red 1:1 complex with Pd(II) in sodium acetate-hydrochloric acid buffer of pH 0.8 to 4.0 at room temperature. The reagent also forms an orange-red radical cation with Os(VIII) in 0.5 to 2.0 M hydrochloric acid. The Pd-PPP complex exhibits an absorption maximum at 490–500 nm with molar absorptivity of 7.1 × 10³ liter mol^?1 cm^?1. The Os-PPP radical cation has an absorption maximum at 505–515 nm with molar absorptivity of 2.21 × 10⁴ liters mol^?1 cm^?1. The Sandell sensitivity is 0.022 μg/cm² (Pd) and 0.008 μg/ cm² (Os). Beer's law is valid over the concentration range 0.2 to 21 ppm (Pd) and 0.2 to 4.2 ppm (Os). The proposed method offers the advantages of simplicity, rapidity, and without the need for heating or extraction. The reagent is used for the determination of Pd in the synthetic mixtures corresponding to Pd alloys used in jewelery and Os in osmiridium alloy.     

Improved spectrophotometric determination of osmium(VIII) with 4-(2-pyridylazo) resorcinol in mixed surfactants

The colour development between 4-(2-pyridylazo)-resorcinol(PAR) and osmium(VIII) in the presence of cationic and nonionic surfactants in a weakly acidic medium was more stable and reproducible than in the absence of surfactant (PAR-alone method). An improved spectrophotometric determination of osmium(VIII) with PAR was investigated in the presence of mixed surfactants of N-hexadecyltrimethylammonium chloride (HTAC) and Brij 58 [poly(oxyethylene)lauryl ether] as cationic and nonionic surfactants at pH 6.0-7.2. The calibration graph was linear in the range 0-110 microg/10 ml osmium(VIII), and the apparent molar absorptivity was 2.4 x 10(4) l.mole(-1).cm(-1) with a Sandell sensitivity of 0.0079 microg/cm(2) osmium(VIII).     

Spectrophotometric determination of osmium (VIII) with promazine hydrochloride

Promazine hydrochloride is proposed as a new reagent for the spectrophotometric determination of osmium (VIII). The reagent forms orange oxidation product with osmium tetroxide at room temperature in acidic media. The effects of acid concentration, time, temperature, and foreign ions are reported. Beer's law is obeyed in the osmium concentration range 1–10 μg/ml.     

Polarographic determination of osmium with the osmium(VIII)-cerium(IV)-arsenic(III) system

A highly sensitive and novel polarographic method has been developed for determination of ultratrace amounts of osmium, based on the catalysis of the cerium(IV)-arsenic(III) reaction by osmium(VIII). The reaction rate is monitored by measuring the arsenic(III) with a single-sweep oscillopolarograph. Osmium concentrations from 7.0 x 10(-11) to 5.0 x 10(-9)M can be determined by the initial rate method. The method has been applied to determination of osmium in refined ore and chlorination residues with satisfactory results.     

Highly sensitive catalytic spectrophotometric determination of ruthenium

A new and highly sensitive catalytic kinetic method (CKM) for the determination of ruthenium(III) has been established based on its catalytic effect on the oxidation of l-phenylalanine (l-Pheala) by KMnO(4) in highly alkaline medium. The reaction has been followed spectrophotometrically by measuring the decrease in the absorbance at 526nm. The proposed CKM is based on the fixed time procedure under optimum reaction conditions. It relies on the linear relationship where the change in the absorbance (DeltaA(t)) versus added Ru(III) amounts in the range of 0.101-2.526ngml(-1) is plotted. Under the optimum conditions, the sensitivity of the proposed method, i.e. the limit of detection corresponding to 5min is 0.08ngml(-1), and decreases with increased time of analysis. The method is featured with good accuracy and reproducibility for ruthenium(III) determination. The ruthenium(III) has also been determined in presence of several interfering and non-interfering cations, anions and polyaminocarboxylates. No foreign ions interfered in the determination ruthenium(III) up to 20-fold higher concentration of foreign ions. In addition to standard solutions analysis, this method was successfully applied for the quantitative determination of ruthenium(III) in drinking water samples. The method is highly sensitive, selective and very stable. A review of recently published catalytic spectrophotometric methods for the determination of ruthenium(III) has also been presented for comparison.     

Selective spectrophotometric determination of vanadium in silicates with a new pyridylazophenol in the presence of hydrogen peroxide

The synthesis of a new heterocyclic azo compound, 2-(3,5-dibromo-4-methyl-2-pyridylazo)-5-diethylaminophcnol (3,5-Br-MEPADAP is described. The dye forms an intensely coloured (ε=4.11·10⁴ 1 mole^-1 cm^-1 at 615 nm) unstable chelate with vanadium(V) in weakly acidic medium. However, vanadium(V) reacts with 3,5-Br-MEPADAP and hydrogen peroxide in 0.5 M sulphuric acid to form a stable 1:1:1 ternary complex which is extractable in several solvents. In the presence of fluoride, the reaction is highly selective for vanadium(V); only large amounts of halides, oxidizing and reducing agents interfere. The effective molar absorptivity is 5.43 ·10⁴ 1 mole^-1 cm^-1 at 615 nm in chloroform. The reagent system was applied for the direct spectrophotometric determination of vanadium in a wide range of silicates; the average relative standard deviation was 0.45 %. The accuracy of the vanadium values obtained for ten international standard rocks compares well with the currently accepted most probable values.     

酶催化动力学光度法测定H2O2

H2O2能够氧化偶氮染料刚果红使之褪色,而模拟酶—血红蛋白对其具有催化作用。据此建立了一种以刚果红为指示剂的H2O2-刚果红-血红蛋白酶催化反应体系测定痕量H2O2的新方法。确定了反应的最佳条件,体系的酸度为pH10.7的NH3-NH4Cl缓冲溶液,最大吸收波长为497 nm。该法的线性范围为8.0×10^-8-8.0×10^-5mol/L,检出限为1.97×10^-9mol/L,表观摩尔吸光系数为4.6×10^4L.mol-1.cm^-1。该方法可用于雨水及消毒水中H2O2的测定。     

Kinetic-catalytic determination of osmium by fluorescence quenching with salicylfluorone and hydrogen peroxide

A highly sensitive and selective fluorescence-quenching kinetic method is proposed for the determination of trace osmium(IV), based on the catalytic effect of osmium(IV) on the salicylfluorone (_ex = 510 nm, _em = 535 nm)-H₂O₂ system at pH 9.3–9.6. Using the fixed time method, osmium(IV) in the range 0.008–0.6 ng/ml can be determined. The detection limit is 0.006 ng/ml. Over thirty anions and cations, including other platinum metal ions, do not interfere, even when present in large excess. The method has been applied successfully for the determination of osmium in a series of synthetic mixtures and refined ore with relative standard deviations of 2–6%.     

Stopped-flow spectrophotometric determination of hydrogen peroxide with hemoglobin as catalyst

A rapid and sensitive method was proposed for the determination of hydrogen peroxide based on the catalytic effect of hemoglobin using o-phenylenediamine as the substrate. Stopped-flow spectrophotometric method was used to study the kinetic behavior of the oxidation reaction. The catalytic effectiveness of hemoglobin was compared with other four kinds of catalysts. The initial rate of the formation of the reaction product 2,3-diaminophenazine at the wavelength of 425 nm was monitored, permitting a detection limit of 9.2x10(-9) mol/l H(2)O(2). A linear calibration graph was obtained over the H(2)O(2) concentration range 5.0x10(-8)-3.5x10(-6) mol/l, and the relative standard deviation at a H(2)O(2) concentration of 5.0x10(-7) mol/l was 2.08%. Satisfied results were obtained in the determination of H(2)O(2) in real samples by this method.     

Thallimetric oxidations-V Titrimetric and spectrophotometric determination of hydrogen peroxide

Titrimetric and spectrophotometric methods have been developed for the determination of hydrogen peroxide at mmole and mumole levels respectively. In these methods thallium(III) is used as the oxidant and the reduced thallium(I) is determined oxidimetrically with potassium bromate in the titrimetric method and by measuring the absorbance of thallium(III) at 260 nm in the presence of 0.1M hydrochloric acid and 1M perchloric acid in the spectrophotometric method. Photochemical redox methods for the estimation of hydrogen peroxide in the presence of a number of diverse ions are described.     

Flow-injection spectrophotometric determination of azithromycin in pharmaceutical formulations using p-chloranil in the presence of hydrogen peroxide.

A flow-injection (FI) spectrophotometric procedure exploiting merging zones is proposed for the determination of azithromycin in pharmaceutical formulations. The method is based on the reaction of azithromycin with tetrachloro-p-benzoquinone (p-chloranil) accelerated by hydrogen peroxide and conducted in a methanol medium, producing a purple-red color compound (lambda(max) = 540 nm). The FI system and the experimental conditions were optimized using a multivariate method. Beer's law is obeyed in a concentration range of 50 - 1600 microg mL(-1) with an excellent correlation coefficient (r = 0.9998). The detection limit and the quantification limit were 6.6 and 22.1 microg mL(-1), respectively. No interference was observed from the common excipients, and the recoveries were within 98.6 to 100.4%. The procedure was applied to the determination of azithromycin in pharmaceuticals with a high sampling rate (65 samples h(-1)). The results obtained by the proposed method were in good agreement with those obtained by the comparative method at 95% confidence level.     

Oxidation of lysine by ferricyanide in presence of osmium(VIII)

Osmium(VIII) catalysed oxidation of lysine by ferricyanide in excess ferrocyanide shows a complex kinetics. The order in lysine falls, from 1 to 0 while that in ferricyanide increases from 0 to 2 with large increase in lysine concentration. The rates were directly proportional to [Os(VIII)] and {Const.+[Fe(CN) ₆ ⁴ ]}. A suitable mechanism is proposed and discussed.

---

Oxidation von lysin mittels ferricyanid in der gegenwart von osmium(VIII)

Zusammenfassung Die von Os(VIII) katalysierte Oxidation von Lysin mit Ferricyanid in überschüssigem Ferrocyanid zeigt eine komplexe Kinetik. Bei starker Steigerung der Lysinkonzentration fällt die Ordnung bezüglich Lysin von 1 auf 0, während bezüglich Ferricyanid eine Erhöhung, von 0 auf 2 festzustellen ist. Die Geschwindigkeitskonstanten waren direkt proportional zu [Os(VII)] und {Const.+[Fe(CN) ₆ ⁴ ]}. Es wird ein möglicher Mechanismus vorgeschlagen und diskutiert.

     

Potentiometric coulometry based on charge accumulation with a peroxidase/osmium polymer-immobilized electrode for sensitive determination of hydrogen peroxide

The charge accumulation due to peroxidase (POD)-catalyzed reduction of H₂O₂ in a test solution (4 μL) by Os(II) in a POD/PVI[Os(dmebpy)₂Cl]-immobilized layer on an electrode (PVI = poly(1-vinylimidazole), dmebpy = 4,4′-dimethyl-2,2′-bipyridine) was monitored potentiometrically for the detection of H₂O₂. Before potentiometry, the Os(II)/Os(III) ratio of the modified electrode was controlled by pre-electrolysis at a given potential in a separated electrolysis cell. The redox potential of the Os polymer film in the test solution shifted to the positive side on the addition of H₂O₂ and reached a constant value due to the accumulation of Os(III) in the film. The total amount of the accumulated charge was determined from the area of the portion corresponding to the redox potential shift on a reversible cyclic voltammogram recorded separately. The low detection limit (5 pmol H₂O₂) was realized with 82–90% of the recovery percentage.     

New water-soluble hydrogen donors for the enzymatic spectrophotometric determination of hydrogen peroxide

Eight N -alkyl-N-V-sulphopropylaniline derivatives have been synthesized and assessed as water-soluble hydrogen donors for the spectrophotometric determination of hydrogen peroxide in the presence of peroxidase. The sodium salts of N-ethyl-N-sulphopropylaniline (ALPS), N-ethyl-N-sulphopropyl-m-toluidine (TOPS) and N -ethyl-N-sulphopropyl-m-anisidine (ADPS) are recommended. They have excellent water solubilities, and the optimum pH range for oxidative condensation with 4-aminoantipyrine in the presence of hydrogen peroxide and peroxidase is 5.5–9.5. The absorbances of the resulting chromogens are 2–3 times higher than that achieved with phenol. The molar absorptivities of the chromogens with 4-aminoantipyrine are 41300 (ALPS, λ_max 561 nm), 37400 (TOPS, λ_max 550 nm) and 27900 (ADPS, λ_max 540 nm). Calibration graphs for the determination of hydrogen peroxide in the presence of a control serum are linear for 7–40 × 10^-6 mol H₂O₂ l^-1.     

Spectrophotometric determination of bismuth(III) with o-hydroxyhydroquinonephthalein in the presence of Brij 58

A simple and sensitive spectrophotometric determination of bismuth(III) is based on the reaction between bismuth(III) and o-hydroxyhydroquinonephthalein in the presence of Brij 58 in acidic media. The calibration graph is linear over the range 0-3.5 mug/ml bismuth(III) in the final solution, and the apparent molar absorptivity at 520 nm is 9.03 x 10(4) l. mole(-1). cm(-1). The proposed method is 2-10 times more sensitive than other methods, and simpler. It has been applied to the assay of bismuth(III) in pharmaceutical preparations, such as dermatol and bismuth subnitrate, with good results.