A method of making a true color stereoscopic hologram

A true color stereoscopic hologram is made with one-wavelength laser. Under illuminating incandescent lamp, a true color stereoscopic image can be seen from the hologram. A diffused reference light and a project object light are used in the recording of the hologram. The three primary color images of natural scenery are encoded on a white-and-black film. With the help of the encoded film, a true color hologram is recorded on a plate by single exposure and a true color stereoscopic by two exposures. The simplification of this method is apparent. Further more, it largely decreases the scattering noise of the hologram and averts the problem of color lack fidelity of the holographic image.     

全息立体多重像的拍摄

本文介绍了用光栅对参考光进行调制,从而拍得全息立体多重像的方法。     

大尺寸物光波面彩色数字全息高质量重建研究

为解决检测面尺寸较大时CCD难以得到高质量数字全息图的问题,本文利用负透镜设计光学系统让CCD接收来自物体的缩小虚像,以球面波为参考波,使用单色CCD近距离得到三种色光照射下的大尺寸彩色物体的数字全息图,然后采用可控放大率波面重建算法得到同一尺寸的数字全息重建像,合成彩色数字全息重建像.同时,使用两种消零级方法去除零级干扰,提高重建像质量,一种方法利用空间光调制器相移技术在参考光中加入一次任意相移,记录两幅数字全息图,消除重建零级像|另一种方法使用“无干扰全息图”消除重建零级像及共轭像.本文讨论结果可为大物体彩色数字全息及多波长数字全息检测应用提供有益的参考.     

Formation of the holographic image of a diffuse object in second-harmonic radiation generated by a nonlinear medium

Results of experiments on recording three-dimensional holographic images of extended diffuse objects using an SHG hologram generating the second harmonic are presented. In this case, the object image is formed by the second-harmonic radiation whose wavelength is smaller than the wavelength of object and reference waves recorded on a hologram by a factor of two. Elements of the theory of an SHG hologram are considered. A holographic image of a transparency object illuminated with diffuse light is obtained. It is shown that the resolving power of this image is close to the limit determined by diffraction effects. An experiment on defocusing the reconstructed image showed that it was localized in one spatial plane and, therefore, was three-dimensional.     

二维彩虹全息图母版的非相干光拷贝技术

描述一种用非干光制作二维彩虹模压全息图母版的新技术。该技术用紫外灯作为记录光不原,记录系统中不用任何光学元件。记录过程不需防振条件,色彩编码 狭缝像的“彩虹版”上进行条纹复制而获得。彩虹版可以无数次重复使用,所以全息图母版的记录十分简单。该技术投资少、效率高,制出的全息图质量好,对大批量模压全息图制造有很高的实用价值。     

On-axis diffuse directional screen based on a transmission Gabor hologram

Holographic single-component diffuse screens based on on-axis transmission holograms are studied theoretically and experimentally. The configurations of extra holographically reconstructed images of the diffuse screen (conjugate image, halo, and zeroth-order spot) are analyzed. A so-called centered hologram is suggested in which the conjugate image of the diffuse screen spatially coincides with the main image, thereby eliminating distortions inserted by the conjugate image. Also, hologram recording using a Mach-Zender interferometer is suggested and implemented. Such an approach makes it possible to eliminate the shadow of an object on the hologram. It is noted that, in recording a planar diffuse screen, the presence of the halo does not distort the image of an object projected through the screen: only the light intensity is partially lost. Analysis of the images projected shows that the luminance of the zeroth-order spot, while relatively low, should be diminished in one way or another.     

一种新的真彩色彩虹全息术

本文提出了一种新的真彩色彩虹全息术称为三维物体的色编码重现技术,其特点是:利用单波长激光对三原色激光所记录的三维漫反射物体的菲涅耳全息图进行编码,从而可用单波长激光器在同一种记录介质上一次曝光记录三维物体的真彩色彩虹全息图。     

Multi-wavelengths digital holography: reconstruction, synthesis and display of holograms using adaptive transformation

A method based on spatial transformations of multiwavelength digital holograms and the correlation matching of their numerical reconstructions is proposed, with the aim to improve superimposition of different color reconstructed images. This method is based on an adaptive affine transform of the hologram that permits management of the physical parameters of numerical reconstruction. In addition, we present a procedure to synthesize a single digital hologram in which three different colors are multiplexed. The optical reconstruction of the synthetic hologram by a spatial light modulator at one wavelength allows us to display all color features of the object, avoiding loss of details.     

单波长记录二维真彩色全息图的一种新方法

提出一种方法，用新型的光学元件－三通道光纤面板作为分色与合成元件，使得单波长真彩色全息图的制作大为简化，而且能够提高全息图再现像的亮度和色饱和度。     

On-axis diffuse screen based on a reference-free volume hologram

A new type of hologram that elaborates upon the simplest (Gabor) on-axis hologram is suggested. The new approach makes it possible to eliminate the projected image distortions typical of the Gabor hologram. Specifically, based on a reference-free thick hologram, an on-axis holographic screen that does not transmit the zeroth order is prepared. In addition, this screen does not produce a halo and the conjugate image. It allows for recording in one spectral range and reconstruction in another, thereby greatly simplifying the choice of a light-sensitive record medium. With this screen, a color image can be projected.     

数字全息周期像的产生机理及在抑制零级衍射上的应用

在数字全息成像中, 利用CCD的RGB模式采样全息图时, 全息重构像会出现特定的周期性分布. 本文从理论和实验上详细研究了这种周期像产生的机理、分布特性和应用. 研究结果显示, 由于CCD的光谱滤镜会使全息图的RGB三个单色采样阵列出现部分像素信号的缺失, 因此, 需要通过特定的demosaicing数学算法对缺失的像素信号进行重建以形成完整的单色采样阵列, 这是数字全息再现像周期分布产生的根源. 而基于demosaicing算法的采样阵列重建会在全息图频谱中引入调制函数, 导致物体再现像和零级衍射斑的周期分布差异. 本文揭示了全息图的RGB采样、demosaicing算法与全息重构像周期性之间的内在关联. 最后, 讨论了结合空间移位和图像形态学技术, 利用重构像的周期性抑制零级衍射斑的应用. 所有理论与实验研究结果完全一致. 关键词： 数字全息 图像周期性 零级斑抑制     

彩色全息图的计算机产生和数字再现

提出了一种基于色彩合成以及菲涅尔衍射原理,用计算机产生全息图并用数字方法再现彩色全息图的方法。该方法的第一步是将物体的彩色RGB图像分离为三基色强度图,再利用博奇编码的方法制成修正离轴参考光分色计算机全息图;第二步是分别对分色全息图在频域进行调制以实现用原参考光真实再现原始物光波。通过滤波消除零级衍射及共轭像的影响,获得了所需要的实像并提高了像质。提供的实验是选用一幅RGB图像作为原始物体,给出了用博奇编码法制成的全息图以及最后经色彩合成获得的再现像。结果表明,该方法能使各分色全息图的再现像准确重合,解决了在色彩合成时容易出现的色串扰问题。     

三维漫射体单波长真彩色彩虹全息术

提出一种新的三维漫反射物体真彩色彩虹全息术,在普通一步法真彩色彩虹全息术的基础上,用单波长激光逆光路再现,可在同一种记录介质上一次曝光记录三维物体的真彩色全息图.因而特别适合于制作光致抗蚀剂模压全息母板.     

大尺寸物光波面彩色数字全息高质量重建研究

为解决检测面尺寸较大时CCD难以得到高质量数字全息图的问题,本文利用负透镜设计光学系统让CCD接收来自物体的缩小虚像,以球面波为参考波,使用单色CCD近距离得到三种色光照射下的大尺寸彩色物体的数字全息图,然后采用可控放大率波面重建算法得到同一尺寸的数字全息重建像,合成彩色数字全息重建像.同时,使用两种消零级方法去除零级...     

Multiplexed phase-conjugate holographic data storage with a buffer hologram

We describe and demonstrate a volume holographic storage system in which a phase-conjugate object beam is reconstructed by the same reference beam that was used for recording. An intermediate hologram is used as a temporary buffer, recorded with its own reference beam and the data-bearing object beam. Reading this buffer hologram with the phase conjugate of its reference beam reconstructs the phase conjugate of the object beam, which can then be recorded into the desired volume hologram for long-term storage. This method combines the immunity to lens aberrations provided by phase-conjugate readout with the simplicity of using the same multiplexed reference beam for both recording and readout. Only a single pair of phase-conjugate reference beams is required. Experimental results are shown with a single LiNbO(3):Fe crystal used as both buffer and storage holograms and a self-pumped phase-conjugate mirror in BaTiO(3) that provides the pair of phase-conjugate reference beams.     

利用国产全色银盐干版制作真彩色反射全息图

本文介绍了利用国产KL型全色银盐干版制作真彩色反射全息图的技术,其中包括干版的化学处理方法、拍摄光路和三基色的选取,提出通过确定全息干版的曝光常量,拍摄具有预期衍射效率全息图的方法,解决曝光量的计算和色平衡的问题.     

Integral color rainbow hologram based on computer image processing

A new method for obtaining color rainbow holograms of 3D scenes using single wavelength laser is proposed and implemented by combining integral photography, computer graphics and rainbow holography. In the method, three integral photography (IP) images whose colors correspond to three primary colors are calculated by simulating integral photography, and exported on the film. By illuminating the IP images with diffused coherent beam from the opposite side, three images of the 3D scene are reproduced and overlapped on a particular image plane by the three linear micro-lens arrays. The linear micro-lens arrays can be regarded as the slits. A color rainbow hologram can be created after a single exposure by interfering the reproduced 3D images and the reference beam. Furthermore, we demonstrate experimentally the new method for a simple case and the results can be generalized in integral photography.     

用全息透镜记录多重分数傅里叶变换全息图

提出一种全息透镜记录多重分数傅里叶变换全息图的新方法，它能在三维空间不同位置和不同方向上分别再现所记录的多个物体的图象，分析了利用全息透镜记录多重分数傅里叶变换全息图的原理及特点，制作了多重分数傅里叶变换全息图，并获得了满意的再现结果。     

The formation of large scale reconstructed images through the use of holograms

We propose and demonstrate a method which constructs large size multicolor images using a holographic technique in limited spaces, i.e., tunnels. A traffic sign image of the same size and color as an actual traffic sign board is displayed using many comparative small holograms. Each hologram is composed of a single computer generated hologram (CGH). Though it was necessary to make many CGHs, we have shortened the hologram production time by putting a reconstructed image on long distance, and using many reconstruction sources. Moreover, though cross-talk images are caused in a color reconstruction, by adjusting the optical system it is possible to make sure that drivers see only the appropriate image. Many holograms function as one big hologram, and it has been confirmed that a large reconstructed image can be displayed in a limited space.     

Single-shot phase-shifting digital holography with a photon-sieve-filtering telescope

A method of single-shot phase-shifting digital holography with a photon-sieve-filtering telescope is proposed. Three copy images with different phases are first generated by use of a monofocal photon-sieve filter in Kepler telescope, and then interfere with the reference plane wave by a beam combiner. The hologram is captured by a charge-coupled device(CCD)in one single exposure. The complex-valued amplitude of the test object can be reconstructed by three-step phase-shifting interferometry through three frames of extracted sub-interferograms from the single-exposure hologram. The principle and simulation experiments are carried out and verified the validity of our proposed method. This method can be applied for snapshot imaging and three-dimensional object construction.