Magnetic and structural properties of Fe/Cu multilayers

Fe/Cu multilayers with Fe and Cu layers of equal thicknesses were grown by high-vacuum evaporation on Si(1 1 1) substrates at room temperature. The crystal orientation, the thickness of the elemental layers and the interplanar distances were analysed by both low- and high-angle X-ray diffraction in the θ–2θ configuration. The magnetic properties of Fe/Cu multilayers were studied by both a static and a dynamic technique, namely surface magneto-optical Kerr effect (SMOKE) and Brillouin light scattering (BLS). Longitudinal SMOKE cycles permitted us to determine the orientation of the easy axis of the magnetization and to put in evidence an appreciable in-plane magnetic anisotropy in multilayers with low periodicity and highly coherent structure. Polar loops were then used to determine the out-of-plane anisotropy fields, showing that both first- and second-order contributions are to be considered in order to reproduce the hysteresis cycle. BLS was then exploited to detect thermaly excited spin waves through inelastic scattering of light. The out-of-plane anisotropy fields evaluated by this high-frequency dynamic technique compare fairly well with the first-order values obtained by analysis of polar SMOKE hysteresis cycles.     

"Live" surface ferromagnetism in Fe nanodots/Cu multilayers on Cu(111)

We investigate the crossover behavior from two-dimensional (2D) to three-dimensional in multilayers of magnetic nanodots grown by stacking 2D Fe nanodot assemblies on Cu(111) single crystal substrate with a Cu spacing layer. Using an in situ magneto-optical Kerr effect, we have observed a striking ferromagnetic to spin-glass-like phase transition with an increasing number of Fe dot layers. The topmost layer of the Fe dots survives the phase transition and remains ferromagnetic. This unusual surface ferromagnetism is likely caused by a surface-state-mediated coupling which is stronger than the coupling in bulk layers. This is confirmed by the fact that the critical temperature of the surface ferromagnetism is considerably higher than that of the bulk spin-glass phase in the system.     

Magnetic and structural properties of Fe(110)/Ag(111) and Fe(100)/Ag(100) multilayers

A comparison of the magnetic and structural properties and growth characteristics between Fe(110)/Ag(111) and Fe(100)/Ag(100) multilayers is presented. The two types of multilayers were made of the same constituent materials but with different oricutations, allowing us to examine the interesting interplay between structure and magnetism. We found fundamentally different magnetic properties including magnetocrystalline anisotropy and surface/interface and thin film magnetism for the two types of multilayers, and their origins were discussed. Presently at the Naval Research Laboratory. Presently at Argonne National Laboratory.     

Magnetic and transport properties of sputtered Fe/Si multilayers

The structural, magnetic and transport properties of sputtered Fe/Si multilayers were studied. The analyses of the data of the X-ray diffraction, resistance and magnetic measurements show that heavy atomic interdiffusion between Fe and Si occurs, resulting in multilayers of different complicated structures according to different sublayer thicknesses. The nominal Fe layers in the multilayers generally consist of Fe layers doped with Si, ferromagnetic Fe-Si silicide layers and nonmagnetic Fe-Si silicide interface layers, while the nominal Si spacers turn out to be Fe-Si compound layers with additional amorphous Si sublayers only under the condition either for the series or for the series multilayers. A strong antiferromagnetic (AFM) coupling and negative magnetoresistance (MR) effect, about 1%, were observed only in multilayers with iron silicide spacers and disappeared when -Si layers appear in the spacers. The dependences of MR on and on bilayer numbers N resemble the dependence of AFM coupling. The increase of MR ratio with increasing N is mainly attributed to the improvement of AFM coupling for multilayers with N. The dependence of MR ratio is similar to that in metal/metal system with predominant bulk spin dependent scattering and is fitted by a phenomenological formula for GMR. At 77 K both the MR effect and saturation field increase. All these facts suggest that the mechanisms of the AFM coupling and MR effect in sputtered Fe/Si multilayers are similar to those in metal/metal system. Received: 11 February 1998 / Revised: 9 March 1998 / Accepted: 9 March 1998     

Magnetic and magnetoresistive properties of epitaxial Co/Cu/Co trilayers on Si(111)

Giant magnetoresistance of the epitaxial Co/Cu/Co trilayers grown on vicinal Si(111) was determined as a function of Cu spacer coverage in the range from 0 to 7 ML. The first maximum of giant magnetoresistance and antiferromagnetic coupling was detected at 3.0 ML coverage of the Cu spacer. The portion of antiferromagnetic coupling in the first antiferromagnetic maximum was estimated as 17%. 3D growth mode of the Cu spacer leads to the simultaneous occurrence of the ferromagnetically and antiferromagnetically coupled areas between the Co layers.     

Magnetic properties of submicron size particles made from Fe/Co multilayers

Arrays of submicron size (0.15 μm) particles of 23 and 35 nm thick Fe(2 ML)/Co(6 ML) multilayers were investigated by magnetization measurements and magnetic force microscopy. The behaviour of elliptical particles is mainly determined by their shape anisotropy. Varying the lateral size and thickness of the particles there is a transition from multi-domain to single-domain states.     

Magnetic and electric properties of (Fe,Co)/(Si,Ge) multilayers

We review selected results concerning the interlayer exchange coupling in Fe/Si _x Fe_1−x , Fe/Ge and Co/Si layered structures. Among the ferromagnet/semiconductor systems, Fe/Si structures are the most popular owing to their strong antiferromagnetic interlayer coupling. We show that such interaction depends not only on semiconducting sublayer thickness, but also on deposition techniques and on the chemical composition of the sublayer as well. In similar heterostructures e.g. Fe/Ge, antiferromagnetic coupling was observed only in ion-beam deposited trilayers at low temperatures. In contrast, in Fe/Ge multilayers deposited by sputtering, no such coupling was found. However, when the Ge is partially substituted by Si, antiferromagnetic interlayer coupling appears. For Co/Si multilayers, we observed a very weak exchange coupling and its oscillatory behavior. The growth of Co on Si occurs in an island growth mode. The evolution of magnetic loop shapes can be successfully explained by the interplay between interlayer coupling and anisotropy terms.     

Magnetic twisted state of Fe/Tb multilayers

The information of the Fe and Tb magnetic moments in [Fe(12 nm)/Tb(15 nm)]₂₅ multilayer was got separately with X-ray magnetic circular dichroism (XMCD) measurements at various temperature. The Tb magnetic moments become to twist with increasing the applied magnetic field, as follows. (1) When the applied field H is less than the coercive force H_C, Fe and Tb magnetic moments align anti-parallel, Fe moments being parallel to the magnetic field. This would be due to the ordinary exchange coupling between Fe and Tb magnetic moments. (2) H>H_C, a twisted magnetic structure appears when the sample temperature is low, particularly lower than 150 K. This magnetic phase could come from the competition among the exchange coupling, the Zeeman energy and the anisotropic energy.     

Large magnetothermoelectric power in Co/Cu, Fe/Cu and Fe/Cr multilayers

We report and discuss experimental data on the thermoelectric power of magnetic multilayers. Measurements of the thermoelectric power of Fe/Cr, Co/Cu and Fe/Cu multilayers have been carried out in the temperature range 4K < T < 150 K magnetic fields perpendicular to the layers. All specimens were found to exhibit pronounced magnetothermoelectric power (MTEP) effects correlating with their giant negative magnetoresistance. The main difference between the MTEP and the magnetoresistance is in their temperature dependence. Whereas the magnetoresistance is a decreasing function of temperature, the MTEP, at least in Co/Cu and Fe/Cu multilayers, is very small at low temperature and increases rapidly above 30–40 K. We ascribe this high temperature part of the MTEP to spin-dependent electron-magnon scattering and we propose a theoretical model.     

Superparamagnetism in small Fe clusters on Cu(111)

Fe clusters of 105±2 atoms/cluster were mass selectively deposited onto Cu(111) at cryogenic temperatures. XMCD was used to measure temperature and direction dependent magnetization curves. The clusters are superparamagnetic at the lowest temperature measured (10 K). Their magnetization curves are consistent with magnetic moments of ≈2.5μ_B per atom which are thus enhanced over the bulk values. Within experimental accuracy, the clusters do not present magnetocrystalline anisotropy in the temperature range of 10 K to 60 K.     

Magnetic phase transition in Co/Cu/Ni/Cu(100) and Co/Fe/Ni/Cu(100)

Magnetic phase transitions in coupled magnetic sandwiches of Cu/Co/Cu/Ni/Cu(100) and Cu/Co/Fe/Ni/Cu(100) are investigated by photoemission electron microscopy. Element-specific magnetic domains are taken at room temperature to reveal the critical thickness at which the magnetic phase transition occurs. The results show that a coupled magnetic sandwich undergoes three types of magnetic phase transitions depending on the two ferromagnetic films' thickness. A phase diagram is constructed and explained in the process of constructing Monte Carlo simulations, which corroborate the experimental results.