New Stationary Phases for Normal-Phase HPLC Based on Silica Gel Modified with Magnesium,Calcium, Strontium,and Barium Salts

Several new stationary phases for normal-phase high-performance liquid chromatography were synthesized by the modification of silica gel with magnesium, calcium, strontium, and barium salts and subsequent calcination at 700°C. These sorbents exhibit an increase in the retention of organic compounds of the basic character, an increase in the selectivity of separation, and a threefold increase in efficiency in comparison with the initial silica gel. The experimental results were explained on the basis of the interpretation of the IR spectra of pyridine adsorbed on the synthesized and initial silica gels.__________Translated from Zhurnal Analiticheskoi Khimii, Vol. 60, No. 8, 2005, pp. 842–847.Original Russian Text Copyright © 2005 by Pirogov, Kuzavlev, Shpigun.     

Physicochemical and Sorption Properties of Silica Gel with Immobilized Xylenol Orange Surface Groups

Organomineral sorbents were prepared by sorption immobilization of Xylenol Orange on the surface of two different samples of silica gel from aqueous solutions with pH 1.68 under static conditions. The diffusion coefficients of Xylenol Organe in the near-surface layer of silica gel and the equilibrium sorption constants were determined. Wash-out of the dye from the sorbent was studied. Sorption of Cu(II), Zn(II), and Pb(II) on the sorbents from aqueous solutions with pH 5.8 was studied.__________Translated from Zhurnal Prikladnoi Khimii, Vol. 78, No. 1, 2005, pp. 73–78.Original Russian Text Copyright © 2005 by Korneev, Kholin.     

Gas-Chromatographic Properties of Silochrom with a Surface Layer of Nickel Dimethylglyoximate and Acetylacetonate Complexes

The separation ability of surface layers of nickel dimethylglyoximate and acetylacetonate bonded to Silochrom S-80 silica gel was studied. The selectivity of separation was estimated for different classes of organic compounds. It was demonstrated that the studied sorbents are promising for the separation of complex mixtures of high-boiling aromatic compounds and oxygen-containing compounds.     

Chitosan-silica nanocomposite sorbent for thin-layer chromatography of alkaloids

The feasibility of using a chitosan-silica nanocomposite sorbent in thin-layer chromatography of cytisine alkaloid and some of its derivatives was studied. The derivatives were obtained by the reactions of cytisine with aromatic aldehydes containing the -OH, -OCH₃, and -Br functional groups as substituents in different benzene ring positions. The separation of cytisine and its derivatives on the chitosan-silica sorbent was more effective than on initial silica gel. The mechanism of chromatographing on the two sorbents was considered; the mobile phase was a 6:1 (v/v) chloroform:methanol mixture.     

Chelating sorbents based on silica gel and their application in atomic spectrometry

This mini-review covers chelating sorbents anchored to silica gel and their analytical applications for the preconcentration, separation and determination of trace metal ions, focussing mainly on the last 20 years. The article summarizes also the experience gathered by our research group in the synthesis and characterization of new modified silica gels via silanization, and their affinity toward selective extraction and separation of trace elements. The introduction of 1,5-bis(di-2-pyridyl)methylene thiocarbohydrazide silica gel (DPTH-gel) and methylthiosalicylate silica gel (TS-gel) chelating sorbents in trace and ultratrace analysis provide vital breakthroughs in preconcentration methods. These home-made materials allow certain analytes to be selectively extracted from complex matrices without matrix interference and good detection limits. The advantages of these new chelating sorbents in comparison with 8-hydroxyquinoline chelating sorbent immobilized on silica gel are discussed.     

Chelating Sorbents Prepared by the Modification of Silica Gel, Lichroprep RP-8 and Lichroprep RP-18 with Calcon and Their Application in the Analysis of Some Metal Ions

 Two new chelating sorbents for metal ions were prepared by the impregnation of chemically modified silicas LiChroprep RP-8 and RP-18 with ion pairs composed of the cation of Aliquat 336 and the anion of Calcon. The sorbents were compared with an analogous sorbent with a plain silica carrier containing the same ion pairs. A hypothesis for binding this ion pair by the surfaces of the applied carriers was presented. A higher stability of the two sorbents in comparison with that of the plain silica chelating sorbent was demonstrated. The sorbents obtained were applied for chromatographic separations of some chosen mixtures of some metal ions and for additional purification of aqueous solutions of alkali metals from trace amounts of heavy metals. The multiple use of the sorbents based on RP-8 and RP-18 in sorption–desorption processes of metal ions without deterioration of their sorption capacities was demonstrated. Received March 8, 2000. Revision March 5, 2001.     

Sorption of Cobalt on Modified Silica Gel Materials

Various silica gel materials were chemically modified with imidazole, diaza-18-crown-6 (DA18C6) and dibenzod-18-crown-6 (DB18C6). The degree of functionalization of the covalently attached molecule was calculated from C, H, N analysis and ranged between 0.270 and 0.552 mmol/g (for sorbents with imidazole) and between 0.043 and 0.062 mmol/g (for sorbents with DA18C6 and DB18C6). The degree of functionalization depends on the reflux time and silica gel matrix used. Experimental sorption capacity ranged between 0.038 and 0.228 mmol/g (for sorbents with imidazole) and between 0.019 and 0.050 mmol/g (for sorbents with DA18C6 and DB18C6). Synthesized hexagonal mesoporous silica matrix MCM-41 with uniform pore diameter <40 Å was used too. Change of pore diameters of silica gel support to larger pores should have a positive influence on access of cobalt ion to sorption centers to increase of sorption capacity of sorbents. The sorption kinetics of cobalt and the influence of cobalt concentration, pH of various kinds of silica gel matrix with immobilized imidazole group in static conditions on sorption were measured. The sorption of cobalt in various conditions (pH, contact time of phases) with constant liquid-solid ratio (V/m = 50 ml/g) was studied. The distribution coefficients ranged between 200 and 50 000 ml/g (for imidazole), 85 and 120 ml/g (for DB18C6) and between 230 and 500 ml/g (for DA18C6) according to silica gel matrix used and according to the method of sorbent preparation. pH plays important role in the sorption of cobalt on prepared sorbents with immobilized crown ethers due to protonization of crown ethers. Protons significantly competes to sorption of cobalt in acidic solutions. The influence of presence of other heavy or toxic metals (Hg(II), Cd(II), Mn(II), Zn(II), Cu(II), Fe(III), Cr(III), Al(III) and the influence of sodium and potassium on sorption Co(II) from aqueous solutions was investigated. Sorption of cobalt decreases in order Hg > Cu > Cd > Zn, Fe > Mn > Al, Cr. The presence of sodium and potassium ions at concentration 0.05 mol/l significantly influences on the sorption of cobalt with sorbent with immobilized DB18C6 functional group.     

Chromatographic properties of mesoporous silica gel modified with acetylacetonates of europium and copper

New mesoporous materials prepared from tetraethoxysilane, i.e., sorbents obtained with the use of surfactants, are synthesized. Their chromatographic polarity is assessed quantitatively. Their Kovats retention indices and Rohrschneider polarity coefficients are calculated. Based on physicohemical data, it is demonstrated that modifying supports with metal chelates changes the structure and properties of the initial sorbents: the differential molar Gibbs free energies rise considerably for sorbent modified with copper acetylacetonate with respect to ethanol (?ΔG′ _i = 7.09 kJ/mol) and nitromethane (?ΔG′ _i = 6.75 kJ/mol), relative to the initial silica gel (5.43 and 4.15 kJ/mol, respectively).     

Preparation and characterization of carbosilane dendrimer-bonded silica gel and its use in LC

Divergently synthesized carbosilane dendrimers generations 1(G1) and 2 (G2) with allyl end groups were bonded onto silica gel. Reactions between the dendrimers and acid-processed silica gel took place, with toluene reflux and organic base as catalyst. Chemically bonded silica gel was characterized by transmission electron microscopy (TEM), infrared (IR), and other methods. The chemically modified silica gels were packed into high-pressure liquid chromatography (HPLC) column and their separation characters were evaluated. G2-bonded silica gel was effective in separating homologous compounds of alcohol, alkyl-substituted benzene, N-substituted benzene, metacrylic acid ester and phthalate. __________ Translated from Journal of Shandong University, 2005, 40(6) (in Chinese)     

Separation of C60 and C70 fullerenes on silica modified by polyaromatic and π-acid aromatic compounds

Separation of C₆₀ and C₇₀ fullerenes by HPLC was studied using sorbents synthesized by reaction of perylenedicarboxylic anhydride, dimethoxyviolanthrene, the tetramer of chromotropic acid with formaldehyde (TCA), trinitrobenzoyl chloride, or chlorotrinitrobenzene with γ-aminopropyl silica. These sorbents possess satisfactory chromatographic properties. The sorbent based on TCA is effective for separation of preparative amounts of fullerenes. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1544–1546, August, 1997.     

Mixed sorbents and their use in continuous flow analysis

The new approach to enhancing the selectivity of sorption separation of metal ions was suggested. The approach is based on using mixed sorbents, which may be obtained, e.g. by simultaneous immobilization of complexing reagents on silica gel and reverse-phase silica gel (C₁₆, Ph). The methods are developed for the simultaneous determination of two (Co-Fe, Co-Zn, Al-Mn) or three (Al, Mn and Fe) elements in the concentration range 2.10^–6–7.10^–4 M with the performance of 21–36 samples per hour.     

Sorption-desorption of radiocesium on various sorbents in presence of humic acid

In general, the amount of radiocesium sorbed by the five sorbents with 0.01 mol·dm^–3 NaCl was in order zeolite > NiFeCN–SiO₂ > montmorillonite > aerogel > silica gel. Addition of humic acid solution to the sorbents depressed the sorption of cesium by all sorbents, except for NiFeCN–SiO₂ was not seen, with the greatest effect showing to the aerogel. The presence of humic acid resulted in an enhanced desorption of cesium from zeolite, NiFeCN–SiO₂ and to a lesser extent from montmorillonite and silica gel. The order of cesium retention following desorption for both sorbent and sorbent/humic-acid mixtures was zeolit > NiFeCN–SiO₂ > montmorillonite > silica gel. The presence of humic acid resulted in decreasing of distribution coefficient values for both sorption and desorption processes.     

Aspects of surface modification, structure characterization, thermal stability and metal selectivity properties of silica gel phases-immobilized-amine derivatives

Four silica gel phases-bound-amine derivatives (I-IV) were prepared based on chemical immobilization technique. The surface modification was identified by determination of the coverage values in mmol g⁻¹ via thermal desorption method (1.463-1.807) and elemental analysis of nitrogen and carbon contents (1.089-2.456). Structure characterization related to immobilization of the amine derivatives was accomplished and evaluated by means of infrared (IR) and secondary ion mass spectrometric (SIMS) technique. The modified silica gel phases (I-IV) along with their interaction products with copper(II) were also examined by electron impact mass spectrometric analysis (EI-MS) as a method for evaluation of their thermal stability and structure elucidation. Potentiometric titration as a method of characterization was applied for the modified silica gel phases (II-IV) and their copper(II)-adduct. A series of bi- and trivalent metal ions were selected to focus more aspects of the selectivity properties incorporated into the modified silica gel phases for binding and interaction with these metals based on determination of the distribution coefficient and separation factor. The results of these evaluation processes were found to prove higher selectivity and preference of these four phases for binding with lead(II) and cadmium(II) compared to other metal ions.     

Separation of homologues of organic compounds using the gradient of the eluent flow rate on a monolithic porous column

The use of the gradient of the eluent flow rate is proposed for the optimization of separation in high-performance liquid chromatography (HPLC). This approach was used for the separation of the homologues of polycyclic aromatic compounds and di-n-alkyl phthalates on monolithic porous silica gel Chromolith (Merck, Germany) with modifying octadecyl radicals by reversed-phase HPLC. The principle of the optimization of the gradient of the eluent flow rate for the separation of the homologues of organic compounds was formulated on the basis of peculiarities in their chromatographic retention. It was demonstrated that using the gradient of the flow rate provides the selective and efficient separation of homologues and a significant decrease in the time of separation.__________Translated from Zhurnal Analiticheskoi Khimii, Vol. 60, No. 4, 2005, pp. 398–403.Original Russian Text Copyright © 2005 by Nesterenko, Rybalko.     

Production of sorbents for reversed-phase chromatography by the alkylation of the surface of silica gel with alcohols

A procedure is proposed for alkylating the surface of silica gel with heptyl, decyl, and dodecyl alcohols with the aim of obtaining sorbents for reversedphase chromatography. The efficacy of the use of the sorbents obtained for the purification and separation of triterpene glycosides has been shown.M. V. Frunze Simferopol' State University. Translated from Khimiya Prirodnykh Soedinenii, No. 3, pp. 376–378, May–June, 1990.     

Production of sorbents for reversed-phase chromatography by the alkylation of the surface of silica gel with alcohols

A procedure is proposed for alkylating the surface of silica gel with heptyl, decyl, and dodecyl alcohols with the aim of obtaining sorbents for reversedphase chromatography. The efficacy of the use of the sorbents obtained for the purification and separation of triterpene glycosides has been shown. M. V. Frunze Simferopol' State University. Translated from Khimiya Prirodnykh Soedinenii, No. 3, pp. 376–378, May–June, 1990.     

Oxidative polymerization of aniline on the surface of insoluble solid poly(sulfo acids) as a method for the preparation of efficient biosorbents

Polyaniline coatings of the cation-exchange resin Dowex and a synthetic composite material based on silica gel surface-modified by a sulfated styrene-divinylbenzene copolymer were prepared by precipitative polymerization of aniline on the surface of the supports. The optimal conditions for the preparation of the polyaniline-containing material providing the formation of a thin polymeric coating on the support surface were determined. Aniline is predominantly consumed to the formation of a uniform polymeric coating about 3 nm thick with an increase in the concentration of sulfo groups on the support surface. The efficiency of using the polyaniline-containing sorbents for the preparative isolation of DNA from plant tissue lysates was demonstrated. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1123–1130, June, 2007.     

Separation of pharmacologically active nitrogen-containing compounds on silica gels modified with 6,10-ionene,dextran sulfate,and gold nanoparticles

New stationary phases for HPLC are obtained via layer-by-layer deposition of polyelectrolytes and studied: (1) silica gel modified layer-by-layer with 6,10-ionene and dextran sulfate (Sorbent 1); (2) silica gel twice subjected to the above modification (Sorbent 2); and (3) silica gel modified with 6,10-ionene, gold nanoparticles, and dextran sulfate (Sorbent 3). The effect the content of the organic solvent in the mobile phase and the concentration and pH of the buffer solution have on the chromatographic behavior of several pharmacologically active nitrogen-containing compounds is studied. The sorbents are stable during the process and allow the effective separation of beta-blockers, calcium channel blockers, alpha-agonists, and antihistamines. A mixture of caffeine, nadolol, tetrahydrozoline, pindolol, orphenadrine, doxylamine, carbinoxamine, and chlorphenamine is separated in 6.5 min on the silica gel modified with 6,10-ionene, gold nanoparticles, and dextran sulfate.

     

Sorption of arsenic onto inorganic sorbents modified with iron compounds

Granulated inorganic sorbents based on silica gel of KSKG grade and aluminum oxide and modified with Fe(III) compounds were developed for water treatment to remove As(V). The influence of the particle size of the modifying additive on the ability of silica gel to take up As(V) was examined. The KSKG-based sorbents modified with nanoparticles of Fe(III) compounds exhibit the highest sorption capacity. The capacity of silica gel based sorbents modified with nanoparticles of iron compounds for As(V) is higher than that of analogous sorbents modified with iron oxides prepared by thermal decomposition of Fe(III) nitrate.     

Preparation and characterization of new sol–gel titanium(IV) butoxide–cyanopropyltriethoxysilane hybrid sorbent for extraction of polar aromatic amines

A new titanium(IV) butoxide-cyanopropyltriethoxysilane (Ti-CNPrTEOS) hybrid material was successfully synthesized for the use as sorbent for the extraction of polar aromatic amines. The sorbent was synthesized by hydrolysis and condensation of titanium(IV) butoxide and cyanopropyltriethoxysilane with the presence of hydrochloric acid as catalyst via sol–gel method. Several factors influencing the synthesized sorbent such as solvent selection, mol of water content, ratio of titanium(IV) butoxide and cyanopropyltriethoxysilane and aging temperature were investigated and optimized. The sorbents were characterized by fourier transform-infrared, field-emission scanning electron microscopy-energy, CHN elemental analysis and thermogravimetric analysis. The applicability of the sorbents for the extraction of polar aromatic amines by the batch sorption method was extensively studied and evaluated. Under the optimum synthesis conditions (tetrahydrofuran as solvent, 1.2 M of hydrochloric acid catalyst, 4 mol of water content with ratio of titanium(IV) butoxide and cyanopropylteriethoxysilane of 1:1 and aging temperature of 60 °C), the extraction showed high recovery towards the extraction of polar aromatic amines. The synthesized sorbent was successfully applied for the extraction of selected aromatic amines via batch sorption method in waste water samples prior to the gas chromatography-flame ionization detector separation. The synthesized sol–gel Ti-CNPrTEOS sorbent demonstrated the potential as an alternative extraction sorbent with higher selectivity towards polar aromatic amines.