Fatigue crack propagation mechanisms in poly(methyl methacrylate) by in situ observation with a scanning laser microscope

Crack propagation tests were performed on an amorphous polymer, poly(methyl methacrylate), to investigate fatigue crack propagation mechanisms. A scanning laser microscope with a newly developed tensile testing machine was used to observe in situ crack propagation in compact‐type specimens. A crack usually propagated within the craze located at the crack tip under both static and cyclic loading conditions. When a crack stably propagated into the craze under static loading conditions, bright bands composed of the broken craze were observed at the edges along the crack wakes. However, there were successive ridges and valleys in place of bright bands along the crack wakes under cyclic loading conditions. When stable fatigue cracks were propagated at the loading half‐cycle in each cycle, new craze fragments appeared that were similar to the bright bands under static loading. However, the thickness of these fragments decreased in the following loading cycle, and a new valley was formed. This suggested that the valleys were formed by the contact between the fracture surfaces near the crack tip during unloading. Fatigue crack propagation is thought to be due to fibrils weakened by crack closure between fracture surfaces. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 3103–3113, 2001     

A ductile-brittle zone in polyimides depending on the reaction temperature

The mechanical and optical properties of polyimides were studied in this paper and the influence of the variation of the reaction temperature on the physico-chemical properties of the polymers was evaluated. From this the dependence of the stress-strain diagrams on the reaction temperature, as well as the stresses and strains at fracture were experimentally determined. Moreover, the elastic moduli and Poisson's ratios, as well as the refractive index of the polymers were evaluated for different temperatures of imidization. In order to define also the behaviour of the polymers as thin membranes at fracture, simple tension tests with edge-cracked thin strips were executed up to fracture. The method of caustics was used, with the specimens loaded inK _I mode of deformation at different stress-levels to evaluate the stress intensity factors of the materials in the non-linear zone of loading. TheK _I -factor was evaluated by applying the simple Dugdale-Barenblatt model for the ductile materials, whereas for brittle samples the elastic theory was used. Interesting results concerning the physico-mechanical properties of the polyimides were derived.     

Crack growth in a pipe grade PVC material under static and cyclic loading conditions

The creep crack growth (CCG) and the fatigue crack growth (FCG) behavior of a commercial pipe grade PVC material was studied based on a linear elastic fracture mechanics (LEFM) methodology. The FCG tests were performed under sinusoidal load control at a frequency of 5 Hz and at R-ratios (F_min/F_max) of 0.1, 0.3 and 0.5; the test temperatures were 23°C and 60°C. The creep crack growth behavior (corresponding to R = 1) was studied at a test temperature of 60°C. The results of the FCG tests revealed that fatigue crack propagation is primarily controlled by the cyclic component of the crack tip stress field rather than by the mean stress level. Comparing FCG and CCG data in terms of K_Imax and K_I, respectively, also confirmed the deteriorating effect of the fatigue loading on the crack growth resistance. Fracture surface investigations for both fatigue and static loading were performed to gain insight into the micromechanisms of crack advance.     

Fracture mechanisms in rigid core-shell particle modified high performance epoxies

The fracture mechanisms of a high performance epoxy system modified with two types of preformed rigid core-shell particles (RCSP) were investigated. The use of the preformed RCSP anables the control of the dispersion of the toughener phase in the epoxy, which, in turn, allows the mechanical properties of the modified epoxy to be optimized. The toughening effect via the RCSP modification is found to be as good as that via the core-shell rubber modification. The moduli andT _g of these RCSP-modified epoxies are virtually unaltered via the RCSP modification, when compared with the neat epoxy resin equivalent. The toughening mechanisms in these toughened systems appear to be predominantly crack deflection, crack bifurcation, and microcracking. Approaches for effective toughening of high performance polymers via rigid polymers are discussed.     

NixCo3-xO4表面修饰对CdSe/TiO2纳米管阵列光电化学氧化水活性的影响

利用氨挥发诱导法在CdSe/TiO2纳米管阵列表面负载一层NixCo3-xO4。采用SEM、XRD、XPS、UV-Vis对样品进行表征,通过线性扫描伏安法测定光阳极的释氧电势来评价其光电水氧化活性。结果表明:表面NixCo3-xO4是尖晶石结构;相对于CdSe/TiO2纳米管阵列光阳极,NixCo3-xO4/CdSe/TiO2光阳极能将光电氧化水的过电势降低430 mV。Ni离子的引入使得NixCo3-xO4表面富含三价阳离子(Ni3+,Co3+),从而促进CdSe/TiO2光阳极光电水氧化的进行。     

Photocatalytic activity of N-doped TiO2: photocatalytic synthesis of o-aminophenol at room temperature

The photocatalytic synthesis of o-aminophenol in methanol was investigated with N-doped TiO₂ nanoparticles under UV-light irradiation. The catalytic quantities of N-doped TiO₂ prepared by a simple modified sol–gel process with urea as nitrogen source rapidly reduced o-nitrophenol to the corresponding amine at room temperature.     

Fabrication and properties of xBiFeO3-(1 − x)Bi4Ti3O12 system by sol–gel process

The thin films of mixture of xBiFeO₃-(1 − x)Bi₄Ti₃O₁₂ (x = 0.4, 0.5, and 0.6) system were prepared by a sol–gel process. The thicknesses of the thin films were 540, 500, and 570 nm, respectively. The crystal structure of all thin films annealed at 650 °C was analyzed by X-ray diffraction. It was found that the thin films at x = 0.4 and 0.5 mainly consisted of a Bi₄Ti₃O₁₂ phase while Bi₅Ti₃FeO₁₅ was the major phase of the thin film at x = 0.6. The thin film (x = 0.6) showed better ferroelectric properties in remnant polarization and polarization fatigue than those observed in the thin films (x = 0.4 and 0.5). The values of remnant polarization 2P _r and coercive field 2E c of the thin film at x = 0.6 were 36 μC/cm² and 192 kV/cm at an applied electric field of 260 kV/cm, respectively. There was almost no polarization fatigue up to 10¹⁰ switching cycles. Also weak ferromagnetism was observed in the thin film at x = 0.6.     

Characteristics of Au/MgxAlO hydrotalcite catalysts in CO selective oxidation

Gold catalysts, supported on a solid base of Mg_xAlO hydrotalcite, were prepared by a modified deposition precipitation method for CO selective oxidation. The preparation parameters and pretreatment of the catalysts were investigated. The pH and the HAuCl₄ concentration in the initial solution, and the Mg/Al molar ratio of Mg_xAlO affected the pH in the final solution and determined the actual gold loading of the catalyst. The calcination temperatures of the Mg_xAlO support and the Au/Mg_xAlO catalyst dominated the Au³⁺/Au⁰ ratio on the catalyst. The pretreatment of the catalyst as well as the gold loading and the Au³⁺/Au⁰ ratio, critically determined the activity of the catalyst for CO selective oxidation. Based on XPS and in situ DR-FTIR analyses, a mechanism for CO selective oxidation on 2%Au/Mg₂AlO was proposed. The hydroxyl group on Mg₂AlO also participated in the reaction.     

Fabrication of a novel Li<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>MoO<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript> film modified electrode and its application as an electrochemical sensor of iodate

A novel organic gel film modified electrode was simply and conveniently fabricated by casting Li_xMoO_y and polypropylene carbonate (PPC) onto the surface of a gold electrode. The cyclic voltammetry and amperometry studies demonstrated that the Li_xMoO_y film modified electrode has a high stability and a good electrocatalytic activity for the reduction of iodate. In amperometry, a good linear relationship between the steady current and the concentration of iodate was obtained in the range from 3×10^–7 to 1×10^–4 mol L^–1 with a correlation coefficient of 0.9997 and a detection limit of 1×10^–7 mol L^–1.     

NTC陶瓷材料Co_(1.5)Mn_(1.5-X)Ni_XO_4中阳离子分布与导电性间的关系

本文通过溶胶-凝胶法制备三元系Co1.5Mn1.5-XNiXO4(X=0,0.1,0.3,0.5,0.7,1.0)NTC热敏电阻粉体材料,采用激光粒度分析、X射线衍射分析、红外光谱分析、电阻测量等手段,表征了煅烧材料的颗粒尺寸、烧结体的物相、红外吸收光谱以及陶瓷材料的电学特性。结合XRD、IR的分析结果,探讨了阳离子分布与热敏电阻电性能之间的关系,为解决热敏电阻材料高精度、高可靠性方面提供了依据。结果表明:随着Ni离子的增加,所得热敏材料的电阻率呈U型变化,材料常数B值从4427减小到2429K,该系列的电阻率、B25/50值调整范围较大,是一种具有实际应用价值的NTC热敏电阻。     

SiO2/TiO2-xCx/C的制备、表征及其吸附和可见光催化性能

以SiO2为成核中心,钛酸四丁酯为钛源,分别以多羟基化合物乙二醇、丙三醇、葡萄糖和聚乙烯醇为联接剂,采用水解沉淀法制备了碳掺杂和包覆的多孔SiO2/TiO2-xCx/C可见光响应型光催化剂。采用X-射线衍射(XRD)、透射电子显微镜(TEM)、X-射线光电子能谱(XPS)、傅里叶变换-红外光谱(FTIR)、比表面积(BET)和紫外-可见(UV-Vis)漫反射光谱对样品进行表征。对不同结构样品的形成机理进行了分析。以次甲基蓝(MB)溶液为模拟废水,对样品的吸附性能和可见光催化性能进行了评价。结果表明,多羟基化合物对材料的结构和性能有重要影响。碳的掺杂和包覆使材料的吸收光谱包含了整个可见光区,而多孔结构使材料的吸附性能得到提高。以聚乙烯醇为原料所得样品吸附性能最好,30 min内吸附率达到70%;而以丙三醇为原料所得样品具有最好的可见光催化性能,40 min内次甲基蓝的降解率达到95%。     

EDTA有效促进石墨相氮化碳(g-C3N4)光催化降解甲基橙

研究了在光照下,乙二胺四乙酸（EDTA）的添加促进石墨相氮化碳（g-C₃N₄）光催化降解甲基橙（MO）.研究了H⁺和羧酸根负离子对光降解MO的影响.紫外-可见漫反射光谱（DRS）研究表明,EDTA的加入并没有改变g-C₃N₄的电子结构和光电特性.EDTA的加入捕获了空穴（h⁺）,促进了光生e^-/h⁺对的分离,从而使光降解活性提高.证明了·O₂^-是光催化降解过程中的主要活性物种.基于上述研究结果,我们提出了一种可能的EDTA促进g-C₃N₄光催化降解MO的机理.这些结果为提高g-C₃N₄光催化降解水体中有机污染物的性能提供了一种新方法.     

Characterization of Alumina Gel Catalysts by Emanation Thermal Analysis (ETA)

Alumina gels made from the metal alkoxide is known to have high catalyst activity for the selective reduction of NO _x by hydrocarbons. It is also reported that the fine structure of the gels effects the activity. In this study, the effect of the preparation method on the fine structure and catalyst activity of the gels was investigated. Monolithic gels were obtained by hydrolysis of Al(sec-C₄H₉O)₃. The wet gels were dried at 90°C (xerogels), supercritically dried (aerogels), or dried after immersion in an ethanol solution of methyltrimethoxysilane (modified xerogels). The changes in the microstructure during heating were discussed using the results of TG-DTA, ETA and N₂ adsorption. The ETA curves show the ²²⁰Rn-release rate, E, of the samples, previously labelled with ²²⁸Th and ²²⁴Ra, during heating. The decrease in E of the xerogel at temperatures higher than 400°C indicates a gradual decrease in the surface area and porosity. A remarkable decrease in the BET surface area of the xerogel was found after heat-treating at 500°C. On the other hand, constant E of the aerogels and modified xerogels above 450°C suggests high thermal stability. The pore radii, estimated by BJH method, and the catalyst activities at 500°C of the aerogels and the modified xerogels were higher than those of the xerogels. The temperature range in which the alumina gels are applicable as catalysts was determined.     

Ag/Ag2MoO4/Bi2MoO6复合光催化剂的制备及其光催化性能

采用水热、化学沉积和原位光还原的方法成功制备了新型Ag/Ag₂MoO₄/Bi₂MoO₆三元复合光催化剂。通过X射线粉末衍射(XRD)、扫描电子显微镜(SEM)、X射线光电子能谱(XPS)和紫外可见漫反射光谱(UV-Vis DRS)等技术对材料的组成、形貌、光吸收特性和光电化学性能等进行系统分析。以四环素为目标污染物,研究Ag/Ag₂MoO₄/Bi₂MoO₆在可见光下的光催化性能。研究结果表明,相比于纯Ag₂MoO₄和Bi₂MoO₆,Ag的表面等离子体共振(SPR)效应显著拓宽了催化体系对可见光的吸收能力及响应范围。当Ag₂MoO₄理论负载量(质量分数)为24.6%时,Ag/Ag₂MoO₄/Bi₂MoO₆复合材料在20 min内可将四环素完全降解,且5次循环使用后仍保持较高的催化活性,表现出良好的循环稳定性。     

High photocatalytic activity and stability for decomposition of gaseous acetaldehyde on TiO2/Al2O3 composite films coated on foam nickel substrates by sol-gel processes

A set of anatase titanium dioxide (TiO₂) films coated on foam nickel that modified by Al₂O₃ films as transition layer (indicated as TiO₂/Al₂O₃ films) were synthesized via sol-gel route. The bulk and surface properties of the TiO₂/Al₂O₃ films were characterized by thermal gravimetric and differential scanning calorimetry (TG-DSC), X-ray diffraction (XRD), field-emission scanning electron microscope (FE-SEM), and BET. The photocatalytic activities of TiO₂/Al₂O₃ films were investigated based on the degradation of gaseous acetaldehyde under ultraviolet (UV) irradiation. The foam nickel is a promising substrate material in practical applications because of its excellent hydrodynamic properties for gas passing. The TiO₂/Al₂O₃ composite films showed much higher photocatalytic activity and stability for degradation of gaseous acetaldehyde than the onefold TiO₂ films. The significant enhancement in photocatalytic activity and stability can be ascribed to the coating of Al₂O₃ transition layer, which concentrates the target substances around TiO₂ particles and increases the specific surface area (SSA) of the substrate (the SSAs of bare foam nickel and Al₂O₃ modified foam nickel are 0.12 and 113.7 m²/g, respectively) to provide more sites for TiO₂ loading.     

Synthesis, thermal stability and magnetic properties of the Lu1−xLaxMn2O5 solid solution

Polycrystalline samples of the Lu_1−xLa_xMn₂O₅ solid solution system were synthesized under moderate conditions for compositions with x up to 0.815. Due to the large difference in ionic size between Lu³⁺ and La³⁺, significant changes in lattice parameters and severe lattice strains are present in the solid solution. This in turn leads to the composition dependent thermal stability and magnetic properties. It is found that the solid solution samples with x≤0.487 decompose at a single well defined temperature, while those with x≥0.634 decompose over a temperature range with the formation of intermediate phases. For the samples with x≤0.487, the primary magnetic transition occurs below 40 K, similar to LuMn₂O₅ and other individual RMn₂O₅ (R=Bi, Y, and rare earth) compounds. In contrast, a magnetic phase with a 200 K onset transition temperature is dominant in the samples with x≥0.634.     

CdS插层的K4Nb6-xCuxO17复合物的制备及其光催化制氢活性

以Nb2O5,K2CO3和CuO为原料经高温固相反应合成K4Nb6-xCuxO17催化剂,并通过层间离子交换反应,胺插入反应以及硫化反应制备CdS插层K4Nb6-xCuxO17复合催化剂(K4Nb6-xCuxO17/CdS)。利用X射线衍射(XRD),X射线光电子能谱(XPS),场发射扫描电镜(SEM),X射线能谱仪(EDX),紫外-可见漫反射(UV-Vis),分子荧光光谱(PL)等技术对催化剂进行表征。考察了催化剂的可见光催化制氢活性。结果表明,Cu离子掺杂进入K4Nb6O17晶格中,CdS位于K4Nb6O17层间。CdS插层K4Nb6-xCuxO17催化剂的最大吸收光波长约为550 nm。催化剂制氢活性有明显提高,紫外光和可见光下3 h产氢量分别达到279.83 mmol.gcat-1和7.11 mmol.gcat-1。最后讨论了复合催化剂光生电荷转移机理。     

Bioelectrochemical detection of L-lactate respiration using genetically modified Hansenula polymorpha yeast cells overexpressing flavocytochrome b2

In general, L-lactate respiration is difficult to detect in living yeast cells due to the small activity of L-lactate oxidizing enzymes within the mitochondria. Genetically modified cells of methylotrophic yeast Hansenula polymorpha overproducing L-lactate:cytochrome c-oxidoreductase (EC 1.1.2.3, also known as flavocytochrome b₂, FC b₂) were physically immobilized by means of a dialysis membrane onto various types of electrode materials in order to investigate the possibility of electrochemically detecting L-lactate respiration. It could be shown that in the case of genetically modified Hansenula polymorpha cells in contrast to cells from the parental strain, enhanced L-lactate-dependent respiration could be detected. Due to overproduction of FC b₂ the O₂ reduction current is decreased upon addition of L-lactate to the electrolyte solution. The electron transfer pathway in the L-lactate-dependent respiration process involves a cascade over three redox proteins, FC b₂, cytochrome c and Complex-IV, starting with L-lactate oxidation and ending with oxygen reduction. By means of selective inhibition of Complex IV with CN⁻, lactate respiration could be proven for causing the decrease in the O₂ reduction.     

2-Azetidinones from 3-aminopropanoic acids and thePh 3P/CCl4(CBr4) orPh 3P/Br2(I2) condensation systems

The title complexes are used as intramolecular cyclization agents to yield under mild conditions and average to good yields 2-azetidinones from variously substituted 3-aminopropanoic acids. The reaction is found to proceed in all examined cases stereospecifically, with one exception. No marked difference with respect to yields and stereospecificity is noted among the four condensation systems.

---

2-Azetidinone aus 3-Aminopropansäuren und Ph₃ P/CCl ₄(CBr ₄) oder Ph₃ P/Br ₂(I ₂) als Kondensationsmittel

Zusammenfassung Die im Titel angegebenen Systeme wurden als Cyclisationsreagentien eingesetzt, um aus substituierten 3-Aminopropansäuren 2-Azetidinone unter milden Bedingungen und mit durchschnittlichen bis guten Ausbeuten darzustellen. Mit einer Ausnahme läuft die Reaktion stereospezifisch. Bei den vier untersuchten Systemen wurde kein beträchtlicher Unterschied in bezug auf Ausbeute und Stereospezifität festgestellt.

     

p区金属氧化物Ga2O3和Sb2O3光催化降解盐酸四环素性能差异

对沉淀法合成的p区金属氧化物Ga₂O₃和Sb₂O₃紫外光光催化降解盐酸四环素的性能进行了研究,讨论了制备条件对光催化性能的影响。最佳制备条件下得到的Ga₂O₃-900和Sb₂O₃-500样品光催化性能存在巨大差异,通过X射线粉末衍射、傅里叶红外光谱、N2吸附-脱附测试、荧光光谱、拉曼光谱、电化学分析及活性物种捕获实验等对样品进行分析,研究二者光催化降解盐酸四环素的机理,揭示影响光催化性能差异的本质因素。结果表明,Ga₂O₃和Sb₂O₃光催化性能差异主要归结于二者不同的电子和晶体结构、表面所含羟基数量及光催化降解机理。