Detection of tyrosine phosphorylated peptides via skimmer collision-induced dissociation/ion trap mass spectrometry

Phosphorylation of proteins is an important post-translational protein modification in cellular response to environmental change and occurs in both prokaryotes and eukaryotes. Identification of the amino acid on individual proteins that become phosphorylated in response to extracellular stimulus is essential for understanding the mechanisms involved in the intracellular signals that these modifications facilitate. Most protein kinases catalyze the phosphorylation of proteins on serine, threonine or tyrosine. Although tyrosine phosphorylation is often the least abundant of the three major phosphorylation sites, it is important owing to its role in signal pathways. Currently available methods for the identification of phosphorylation sites can often miss low levels of tyrosine phosphorylations. This paper describes a method for the identification of phosphotyrosine-containing peptides using electrospray ionization on an ion trap mass spectrometer. Skimmer-activated collision-induced dissociation (CID) was used to generate the phosphotyrosine immonium ion at m/z 216. This method is gentle enough that the protonated molecule of the intact peptide is still observed. In-trap CID was employed for the verification of the phosphotyrosine immonium ion. Using this technique, low levels of phosphotyrosine-containing peptides can be identified from peptide mixtures separated by nanoflow micro liquid chromatography/mass spectrometry.     

Top-down tandem mass spectrometry of tRNA via ion trap collision-induced dissociation

Transfer RNA is a class of highly modified and structured non-coding RNA molecules generally comprised of 74–95 nucleotides. In this study, tandem mass spectrometry of intact multiply charged tRNA anions of roughly 25 kDa in mass has been demonstrated using a quadrupole/time-of-flight tandem mass spectrometer adapted for ion/ion reaction studies. The sample proved to be a mixture of tRNA molecules. The mass of the most abundant component of the mixture was not consistent with that of the nominal identity of the tRNA from the supplier, viz., tRNA^phe; rather, the mass was consistent with tRNA^Phe bearing an incomplete 3′-terminus. Multiply-charged anions from the major components were isolated in the gas phase and subjected to ion trap collision-induced dissociation without subsequent ion/ion reactions. Abundant fragments from the 5′- and 3′-termini of the molecule could be used to identify the major component as tRNA^phe-3′adenosine (without 3′-phosphorylation). Roughly 15% of the primary sequence of the intact tRNA was unambiguously reflected in the product ion spectrum. The existence of a possible tRNA^Phe variant and the intact tRNA^Phe was also supported by ion trap CID data. The multiply-charged fragment ions derived from tRNA^Phe-3′adenosine were further charge-reduced to mostly singly- and doubly-charged species via proton transfer ion/ion reactions with benzoquinoline cations. The resulting reduction in spectral overlap and charge state ambiguity simplified interpretation of the product ion spectrum and allowed for the identification of product ions from roughly 60% of the sequence.     

Low-mass ions produced from peptides by high-energy collision-induced dissociation in tandem mass spectrometry

High-energy collision-induced dissociation (CID) mass spectrometry provides a rapid and sensitive means for determining the primary sequence of peptides. The low-mass region (below mass 300) of a large number of tandem CID spectra of peptides has been analyzed. This mass region contains several types of informative fragment ions, including dipeptide ions, immonium ions, and other related ions. Useful low-mass ions are also present in negative-ion CID spectra. Immonium ions (general structure [H₂N=CH-R]⁺, where R is the amino acid side chain) and related ions characteristic of specific amino acid residues give information as to the presence or absence of these residues in the peptide being analyzed. Tables of observed immonium and reiated ions for the 20 standard amino acids and for a number of modified amino acids are presented. A database consisting of 228 high-energy CID spectra of peptides has been established, and the frequency of occurrence of various ions indicative of specific ammo acid residues has been determined. Two model computer-aided schemes for analysis of the ammo-acid content of unknown peptides have been developed and tested against the database.     

Comparison of infrared multiphoton dissociation and collision-induced dissociation of supercharged peptides in ion traps

The number and types of diagnostic ions obtained by infrared multiphoton dissociation (IRMPD) and collision-induced dissociation (CID) were evaluated for supercharged peptide ions created by electrospray ionization of solutions spiked with m-nitrobenzyl alcohol. IRMPD of supercharged peptide ions increased the sequence coverage compared with that obtained by CID for all charge states investigated. The number of diagnostic ions increased with the charge state for IRMPD; however, this trend was not consistent for CID because the supercharged ions did not always yield the greatest number of diagnostic ions. Significantly different fragmentation pathways were observed for the different charge states upon CID or IRMPD with the latter yielding far more immonium ions and often fewer uninformative ammonia, water, and phosphoric acid neutral losses. Pulsed-Q dissociation resulted in an increase in the number of internal product ions, a decrease in sequence-informative ions, and reduced overall ion abundances. The enhanced sequence coverage afforded by IRMPD of supercharged ions was demonstrated for a variety of model peptides, as well as for a tryptic digest of cytochrome c.     

Differentiation of ionised benzimidazole from its isomeric alpha-distonic ion by collision-induced dissociation and neutralisation-reionisation mass spectrometry

Ionised benzimidazole and its isomeric alpha-distonic ion (or ionised ylid) have been examined by recording their metastable ion, collision-induced dissociation and neutralisation-reionisation mass spectra. These tautomers may be distinguished by careful consideration of key features of the collision-induced dissociation spectra, with or without prior neutralisation and reionisation. Formation of doubly-charged ions by charge stripping occurs preferentially when the alpha-distonic ion is subjected to collision. This alpha-distonic ion survives neutralisation and reionisation, thus establishing that the corresponding ylid is stable on the microsecond time frame. The effects of benzannulation on the ease of differentiation of classical and distonic radical cations derived from biologically important heterocycles are considered.     

Application of MALDI TOF/TOF mass spectrometry and collision-induced dissociation for the identification of disulfide-bonded peptides

This paper describes a method for the fast identification and composition of disulfide-bonded peptides. A unique fragmentation signature of inter-disulfide-bonded peptides is detected using matrix-assisted laser desorption/ionization (MALDI) time-of-flight (TOF)/TOF mass spectrometry and high-energy collision-induced dissociation (CID). This fragmentation pattern identifies peptides with an interconnected disulfide bond and provides information regarding the composition of the peptides involved in the pairing. The distinctive signature produced using CID is a triplet of ions resulting from the cleavage of the disulfide bond to produce dehydroalanine, cysteine or thiocysteine product ions. This method is not applicable to intra-peptide disulfide bonds, as the cleavage mechanism is not the same and a triplet pattern is not observed. This method has been successfully applied to identifying disulfide-bonded peptides in a number of control digestions, as well as study samples where disulfide bond networks were postulated and/or unknown.     

Selective parent ion axialization for improved efficiency of collision-induced dissociation in laser desorption-ionization fourier transform ion cyclotron resonance mass spectrometry

We have systematically established the excitation frequency, amplitude, duration, and buffer gas pressure for optimal axialization efficiency and mass selectivity of quadrupolar excitation-collisional cooling for isolation of parent ions for collision-induced dissociation in Fourier transform ion cyclotron resonance mass spectrometry. For example, at high quadrupolar excitation amplitude, ion axialization efficiency and selectivity are optimal when the applied quadrupolar excitation frequency is lower than the unperturbed ion cyclotron frequency by up to several hundred hertz. Moreover, at high buffer gas pressure (10^?6 Torr), quadrupolar excitation duration can be quite short because of efficient collisional cooling of the cyclotron motion produced by magnetron-to-cyclotron conversion. Efficiency, detected signal magnitude, and mass resolving power for collision-induced dissociation (CID) product ions are significantly enhanced by prior parent ion axialization. With this method, we use argon CID to show that C ₉₄ ⁺ (m/z 1128) formed by Nd:YAG laser desorption-ionization behaves as a closed-cage structure.     

Free radical-induced site-specific peptide cleavage in the gas phase: Low-energy collision-induced dissociation in ESI- and MALDI mass spectrometry

Protein identification is routinely accomplished by peptide sequencing using mass spectrometry (MS) after enzymatic digestion. Site-specific chemical modification may improve peptide ionization efficiency or sequence coverage in mass spectrometry. We report herein that amino group of lysine residue in peptides can be selectively modified by reaction with a peroxycarbonate and the resulting lysine peroxycarbamates undergo homolytic fragmentation under conditions of low-energy collision-induced dissociation (CID) in electrospray ionization (ESI) and matrix-assisted laser desorption and ionization (MALDI) MS. Selective modification of lysine residue in peptides by our strategy can induce specific peptide cleavage at or near the lysine site. Studies using deuterated analogues of modified lysine indicate that fragmentation of the modified peptides involves apparent free-radical processes that lead to peptide chain fragmentation and side-chain loss. The formation of a-, c-, or z-types of ions in MS is reminiscent of the proposed free-radical mechanisms in low-energy electron capture dissociation (ECD) processes that may have better sequence coverage than that of the conventional CID method. This site-specific cleavage of peptides by free radical- promoted processes is feasible and such strategies may aid the protein sequencing analysis and have potential applications in top-down proteomics.     

Using accurate mass electrospray ionization-time-of-flight mass spectrometry with in-source collision-induced dissociation to sequence peptide mixtures

Although data-dependent LC-MS-MS with database searching has become au courant for identifying proteins, the technique is constrained by duty-cycle inefficiency and the inability of most tandem mass analyzers to accurately measure peptide product ion masses. In this work, a novel approach is presented for simultaneous peptide fragmentation and accurate mass measurement using in-source collision-induced dissociation (CID) on electrospray ionization (ESI)-time-of-flight (TOF) MS. By employing internal mass reference compounds, mass measurement accuracy within +/-5 ppm for tryptic peptide precursors and +/-10 ppm for most sequence-specific product ions was consistently achieved. Analysis of a complex solution containing several digested protein standards did not adversely affect instrument performance.     

A novel approach to collision-induced dissociation (CID) for ion mobility-mass spectrometry experiments

Collision induced dissociation (CID) combined with matrix assisted laser desorption ionization-ion mobility-mass spectrometry (MALDI-IM-MS) is described. In this approach, peptide ions are separated on the basis of mobility in a 15 cm drift cell. Following mobility separation, the ions exit the drift cell and enter a 5 cm vacuum interface with a high field region (up to 1000 V/cm) to undergo collisional activation. Ion transmission and ion kinetic energies in the interface are theoretically evaluated accounting for the pressure gradient, interface dimensions, and electric fields. Using this CID technique, we have successfully fragmented and sequenced a number of model peptide ions as well as peptide ions obtained by a tryptic digest. This instrument configuration allows for the simultaneous determination of peptide mass, peptide-ion sequence, and collision-cross section of MALDI-generated ions, providing information critical to the identification of unknown components in complex proteomic samples.     

High-energy collision-induced dissociation mass spectrometry of synthetic mannose-6-phosphate oligosaccharides

The high-energy collision-induced dissociation spectra of a series of linear and branched synthetic mannosyl oligosaccharides that contain 6-phosphate substituents on either or both non-reducing terminal or penultimate residues have been studied. These phosphorylated structures were designed to mimic those of naturally derived N-glycans (Man-6-PO₄) on lysosomal enzymes and to probe the minimally required binding motif for the Man-6-PO₄ receptors. When a phosphate group was present, the spectra were dominated by ions that arise from cleavages at the glycosidic bonds (single and double) with charge retention on the phosphate-containing fragments. The spectra of linear structures that bear the nonreducing terminal Man-6-phosphate residues were devoid of Y-type ions, unlike those with similar phosphorylation at the penultimate residue. The location of the phosphorylated residue was deduced from the presence or absence of unique B and Y ions. In neutral branched structures, the ions were formed by cleavage at the glycosidic bond at either one or both of the branch points and the aglycon, which was attached to the disubstituted mannosyl residue. Branched oligosaccharides that contained one or two terminal Man-6-PO₄ residues also showed double cleavages with charge retention on the phosphate-containing fragment. Our investigation shows that positive mode high energy collision-induced dissociation mass spectrometry can determine the location—terminal or penultimate—of Man-6-PO₄ residues in N-linked type oligosaccharides.     

Spectroscopic and theoretical evidence for oxazolone ring formation in collision-induced dissociation of peptides

Infrared spectroscopy of the b4+ fragment of Leu-enkephalin demonstrates that the oxazolone ring is formed during collision-induced dissociation of protonated peptides, whereas the linear acylium structure is not observed. Three distinct oxazolone structures are identified, based on the highly conformer-diagnostic C=O stretching mode of the oxazolone ring, clearly showing that proton transfer from the oxazolone ring to the N-terminus takes place. Note that the presence of a cyclic peptide b4+ isomer cannot be excluded.     

Effect of method of ion preparation on low-energy collision-induced dissociation mass spectra

The collision-induced dissociation (CID) mass spectra of protonated cocaine and protonated heroin have been measured using a triple quadrupole mass spectrometer at 50 eV ion/neutral collision energy for protonated molecules prepared by different protonating agents. The CID mass spectra of protonated cocaine using H⁺(H₂O)_n, H⁺(NH₃)_n and H⁺((CH₃)₂NH)_n as protonating agents are essentially identical and it is concluded that, regardless of the initial site of protonation, the fragmentation reactions occurring on collisional activation are identical. By contrast, protonated heorin prepared with H⁺(H₂O)_n and H⁺(NH₃)_n as protonating agents show substantial differences. That formed by reaction of H⁺(H₂O)_n shows a much more abundant peak corresponding to loss of CH₃CO₂H. From a comparison with model compounds, and from a consideration of the three-dimensional structure of heroin, it is concluded that with H⁺(H₂O)_n as protonating agent significant protonation occurs at the acetate group attached to the alicyclic ring, leading to acetic acid loss on collisional activation, but that reaction of H⁺(NH₃)_n leads to protonation at the nitrogen function. The proton attached to nitrogen cannot interact with the acetate group and, consequently, the probability of loss of acetic acid on collislional activation is greatly reduced.     

Fragment–molecule adduct ion formation in positive methane chemical ionization mass spectrometry1

Fragment–molecule (F⁺M) adduct ions of a variety of heterocyclic systems have been observed in positive methane chemical ionization spectra at relatively low sample concentrations, i.e. in the microgram range. The relative abundance of these adduct ions increases with sample concentration. Possible mechanisms of formation of F⁺M are discussed. Formation of such ions should be recognized as an artifact, otherwise such F⁺M adduct ions in chemical and electron ionization may be mistaken for impurities present in a sample.     

Selective adduct formation by furan chemical ionization reagent in gas chromatography ion trap mass spectrometry

The analytical potential of furan as a chemical ionization (CI) reagent was evaluated for selectivity with nine monosubstituted naphthalene compounds. The ion-molecule reactions of furan and tetrahydrofuran (THF) were compared with those of methane, methanol and acetonitrile (prominently producing [M + H](+) ion base peaks) with naphthalene compounds in chemical ionization mass spectrometry (CI-MS). Reactions with furan predominantly show M(+) and [M + 39](+) ions. Based on this phenomenon, investigations were carried out for some of the molecular factors such as proton affinity, substituent effects and the preferred site of [C(3)H(3)](+) ion attachment that influence reactivity in furan CI. High selectivity with different substituents is observed in the formation of [M + 39](+) adduct ion, suggesting its usefulness as selective ionization reagent liquid. The selectivity and sensitivity are illustrated in the analysis of mixture of amino acids. Furthermore, the structure determination and reaction mechanism study is characterized by collision-activated dissociation experiments in CI-MS/MS and CI-MS/MS/MS.     

Comparison of charged derivatives for high energy collision-induced dissociation tandem mass spectrometry

Fixed-charge derivatives have been used to direct the fragmentation pattern of high energy collision-induced dissociation tandem mass spectra for several years. It has been noted that a fixed-charge placed at a terminus of a peptide will simplify the pattern of fragment ions that are produced in collision-induced dissociation. Trimethylammoniumacetyl, dimethyloctylammoniumacetyl, and triphenylphosphoniumethyl derivatives have been cited in the literature for this purpose and many other structures are possible. This work compares the cited derivatives as well as some new structures. The criteria used include the ease of synthesis and purification of the derivatized peptide and the effects of the derivative on the peptide sequence fragment ion yield and ionization efficiency. The trimethylammoniumacetyl derivative is concluded to be the most practical for general use, whereas the dimethyloctylammoniumacetyl derivative is found to be desirable for use with hydrophilic peptides.     

De novo sequencing of proteolytic peptides by a combination of C-terminal derivatization and nano-electrospray/ collision-induced dissociation mass spectrometry

A series of synthetic peptides (3-15 residues), C-terminally derivatized with 4-aminonaphthalenesulfonic acid (ansa), have been analyzed on a hybrid magnetic sector-orthogonal acceleration time-of-flight tandem mass spectrometer, fitted with a nano-electrospray (nano-ES) interface. Deprotonated molecules generated by negative-ion ES were subjected to collision-induced dissociation (CID) using either methane or xenon as the collision gas, at a collision energy of 400 eV (laboratory frame of reference). As a consequence of charge localization on the sulfonate group, only C-terminal fragment ions were formed, presumably by charge-remote fragmentation mechanisms. Interpretable CID spectra were obtained from fmol amounts of the small peptides (up to 6 residues), whereas low pmol amounts were required for the larger peptides. CID spectra were also recorded of derivatized, previously noncharacterised peptides obtained by proteolysis of cytosolic hamster liver aldehyde dehydrogenase. Interpretation of these CID spectra was based on rules established for the fragmentation of the synthetic peptides. This study shows that derivatization with ansa may be useful in the de novo sequencing of peptides.     

Boundary-effect activated dissociation in ion trap tandem mass spectrometry

The potential of boundary-effect activated dissociation (BAD) in ion trap tandem mass spectrometry (MS/MS) is discussed. Several classes of compounds were investigated and the BAD product ion tandem mass spectra were compared with those from collisionally activated dissociation (CAD) where an auxilliary r.f. ‘tickle’ voltage is used. The energy deposition in BAD MS/MS is generally lower than that for optimized CAD, but the experiments are easier to perform. An example of the BAD MS/MS of C₁₀ alkylbenzenes and benzothiophene in diesel fuel using gas chromatographic introduction and predicted r.f. and d.c. voltages is presented.