NaHSO4·H2O催化合成苯甲酸甲酯

以NaHSO4*H2O催化苯甲酸与甲醇的酯化反应,合成了苯甲酸甲酯.研究结果表明,NaHSO4*H2O具有较高的催化活性.考察了苯甲酸/甲醇摩尔比、催化剂用量及反应时间对酯产率的影响.在优化反应条件[n(苯甲酸)∶n(甲醇)∶n(NaHSO4*H2O)=1∶2∶0.29,回流8h]下,苯甲酸甲酯产率达85.3%.     

GoAggⅡ体系催化氧化环己烷为环己酮

研究了Gif体系成员之一GoAggⅡ体系催化氧化环己烷为环己酮的反应.考察了催化剂用量、氧化剂用量、溶剂配比、反应温度和反应时间等对产率的影响.最佳反应条件为:1 40 mmol,催化剂[NH4Fe(SO4)2]1mmol,氧化剂[30%H2O2]80 mmol,溶剂[y(吡啶):V(乙酸)=5.6:1.0]33 mL,于40℃反应16 h.在此条件下,收率达10.33%,n(环己酮):n(环己醇)=5.61.     

NaHSO4·H2O催化合成苯甲酸甲酯

以 Na HSO4 · H2 O催化苯甲酸与甲醇的酯化反应 ,合成了苯甲酸甲酯。研究结果表明 ,Na HSO4 · H2 O具有较高的催化活性。考察了苯甲酸 /甲醇摩尔比、催化剂用量及反应时间对酯产率的影响。在优化反应条件 [n(苯甲酸 )∶n(甲醇 )∶n( Na HSO4 ·H2 O) =1∶ 2∶ 0 .2 9,回流8h]下 ,苯甲酸甲酯产率达 85.3 %。     

(NH4)15[La(PMo9V2O39)2].6H2O 杂多配合物对苯酚羟化的催化作用

合成了(NH4)15[La(PMo9V2O39)2].6H2O杂多配合物, 并考察其对苯酚过氧化氢羟化反应的催化活性. 探讨了温度、催化剂用量、反应时间、 n(PhOH)/n(H2O2)摩尔比以及反应介质的pH值对反应的影响. 实验结果表明, 以甲醇为溶剂、 n(PhOH)/n(H2O2)=1∶2、反应体系的pH值为5左右、反应温度343 K、反应时间约4 h的条件下, 苯酚转化率可达44.30%, 对苯二酚产率达43.35%. 并采用ICP、 IR、 UV和XRD等技术, 对(NH4)15[La(PMo9V2O39)2].6H2O进行表征, 初步证实了(NH4)15[La(PMo9V2O39)2].6H2O具有Keggin结构.     

4-炔丙氧基苯甲酸的水相合成

以聚乙烯醇(PEG 600)为相转移催化剂,对羟基苯甲酸(2)与3-溴丙炔(3)反应,成功地完成了4-炔丙氧基苯甲酸(其结构经1H NMR和IR表征)的水相合成.最佳反应条件为: 2 0.5 mmol, n(2) ∶ n(3) ∶ n(NaOH)=1.0 ∶ 1.1 ∶ 4.0, w(PEG)=5%,水200 mL,于75 ℃反应72 h,产率85%.     

Hβ分子筛催化剂的制备及其在合成2-乙基蒽醌中的应用

制备了系列Hβ分子筛催化剂Cat T(T为焙烧温度)和系列负载型催化剂CatR550[R=H2SO4(a),(NH4)2S2O8(b)和(NH4)2SO4(c)]。以邻苯二甲酸酐(2)和乙苯(3)经Friedel-Crafts酰基化反应合成2-乙基葸醌(1)为探针反应,考察了T和R对其催化活性的影响。结果表明:最佳焙烧温度为550℃;最佳R为c。以Cat550为催化剂对合成1的反应条件进行了优化,考察了反应温度,反应时间,Cat550用量及r[n(2)∶n(3)]对酰化反应的影响。在最佳反应条件[2 40 mmol,n(2)∶n(3)=1∶25,Cat550用量2.0 g,于250℃反应5 h]下,2的转化率为30.6%,1的选择性为33.8%,1的收率为10.3%。以Catc550为催化剂,在c(c)为1.75 mol·L-1时,在相同的最佳反应条件下,2的转化率为39.0%,1的选择性为43.4%,1的收率为16.9%。     

离子液体[bmim]Cl/AlCl_3催化5-氰基吲哚酰化反应

5-氰基吲哚与4-氯丁酰氯之间的傅-克酰化反应使用路易斯酸之类的催化剂(如AlCl3、FeCl3),反应产物复杂,无法分离出期望的产物5-氰基-3-(4-氯丁酰基)吲哚。在离子液体[bmim]Cl/AlCl3中,进行5-氰基吲哚与4-氯丁酰氯间的傅-克酰化反应,则反应的主产物是5-氰基-3-(4-氯丁酰基)吲哚,产物结构通过质谱与核磁共振氢谱表征。考察了[bmim]Cl/AlCl3中AlCl3与[bmim]Cl间的摩尔比以及[bmim]Cl/AlCl3与5-氰基吲哚的摩尔比对该酰化反应的影响。结果表明,当n(AlCl3)∶n([bmim]Cl)=2.5∶1,n([bmim]Cl/AlCl3)∶n(5-氰基吲哚)=2∶1,室温下反应24 h,最大产率71.7%。     

Brφnsted酸性离子液体催化合成阿司匹林

用Brφnsted酸性离子液体[Hmim]BF4、[bmim]HSO4和[bmim]H2PO4代替浓H2SO4为催化剂催化乙酸酐对水杨酸的乙酰化,合成阿司匹林。考察了反应温度、反应时间、催化剂用量、酐/醇摩尔比对水杨酸酰化反应产率的影响和离子液体的重复使用性能。选择了最佳反应条件,以[bmim]H2PO4作为催化剂,催化剂用量为0.28g(1.18×10-3mol),水杨酸2.762g(0.02mol),乙酸酐4.083g(0.04mol),n(酐)∶n(醇)=2∶1,反应时间30min,反应温度70℃,产率最高达63.43%,并且[bmim]H2PO4溶于水后通过过滤和旋蒸脱水,重复使用3次,产率无明显变化。     

2,7-二溴-4-氨基芴的合成及其光学性质

以芴(1)为原料,通过溴代、硝化、还原反应合成了2,7-二溴-4-氨基芴(4),其结构经1H NMR,13C NMR,IR和ESI-MS确证。分别对溴化、硝化和还原反应条件进行优化。结果表明:在最佳溴化反应条件[CHCl3为溶剂,Cu Br2为催化剂,1 90 mmol,n(1)∶n(Cu Br2)∶n(Br2)=1.0∶0.025∶2.89,于0℃反应24 h]下,溴化产物2,7-二溴芴(2)的产率93.8%;在最佳硝化反应条件[2 30 mmol,混合酸(85%硝酸+96%硫酸)为硝化试剂,n(2)∶n(HNO3)=1.0∶4.6,于70℃反应1 h]下,硝化产物2,7-二溴-4-硝基芴(3)的产率94.7%;在最佳还原反应条件(3 30 mmol,Zn/Ca Cl2为还原剂,回流反应4 h)下,4的产率89.5%。运用UV-Vis和荧光光谱初步研究了4的光学性质。结果表明:4的λmax为352.4 nm;在352.4 nm波长激发下,4的λem位于388.4 nm和412.2 nm,光带隙低至2.66 e V。     

SnO_2-Al_2O_3固体酸催化剂的制备及其对苯液相硝化反应的催化活性

采用混合研磨法制备了一系列锡基混合氧化物催化剂(Sn-M,M=La,V,Ce,Fe,Nb,Sb,Al,Mn,Ti)。以65%～68%HNO3为硝化剂,研究了Sn-M催化苯液相硝化合成硝基苯的反应,结果表明Sn-Al具有最好的催化活性。采用NH3-TPD和Py-IR法测量了不同锡铝比[r=n(Sn)∶n(Al)]的Sn-Al催化剂的表面酸性质,结果表明适量的铝可提高Sn-Al催化剂的催化活性,最佳r=1∶8。在最佳反应条件[苯18 mL,V(硝酸)∶V(苯)=2,于75℃反应7 h]下,硝基苯产率85.5%,选择性100%。Sn-Al(r=1∶8)催化剂重复使用5次,活性基本无变化。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.