Recent progress in chemical detection with single-walled carbon nanotube networks

Single-walled carbon nanotubes (SWNTs) have had significant impact on the development of gas sensors in the last decade. However, useful applications of SWNTs are limited by the lack of manufacturable routes to device formation. This Highlight article chronicles recent progress in this area and demonstrates the great promise of a new room temperature deposition method for SWNT networks in gas sensing applications. This liquid deposition technique allows the deposition of pre-treated, highly aligned SWNT networks on a wide variety of substrates. A significant advantage of SWNT-network sensors is that fluctuations in the electrical response of individual SWNTs become less important as the size of the network increases. Therefore, device properties can be controlled by the overall density of the network rather than the physical properties of any individual SWNT. At densities where semiconducting pathways dominate, highly sensitive thin-film chemoresistive sensors can be fabricated. Such devices also have higher signal-to-noise ratios and are easier to fabricate than devices based on a single SWNT.     

Large-scale fabrication of aligned single-walled carbon nanotube array and hierarchical single-walled carbon nanotube assembly

Aligned single-walled carbon nanotubes (SWNTs) and hierarchical SWNT assembly were fabricated by electrospinning. The high fiber elongation and high DC electric field applied during the electrospinning process result in the orientation of the SWNTs along the axial direction of the fiber. The alignment of the electropsun composite fiber transfers this local SWNT orientation to macroscopically aligned SWNTs. After removing the polymer component from the aligned composite fiber, we produced large area aligned SWNTs. The results show that the directional control of SWNT alignment and debundling of SWNTs into individual tubes can be simultaneously realized.     

Electrochemical templating of metal nanoparticles and nanowires on single-walled carbon nanotube networks

The use of single-walled carbon nanotube (SWNT) networks as templates for the electrodeposition of metal (Ag and Pt) nanostructures is described. Pristine SWNTs, grown on insulating SiO2 surfaces using catalyzed chemical vapor deposition, served as the working electrode. In the simplest case, electrical contact was made by depositing a gold strip on the SWNT substrate (device 1). Deposition of Ag and Pt over extensive periods (30 s) resulted in a high density of particles on the SWNTs, with almost contiguous nanowire formation from the Au/SWNT boundary moving to isolated nanoparticles at further distances from the contact. For direct electrochemical studies of Ag and Pt nucleation, the assembly was coated in a resist layer and a small window opened up to expose only the electrically connected SWNTs to solution (device 2). In this case, the electrochemical signature in voltammetric and amperometric studies of metal deposition was due solely to processes at the SWNTs. Coupled with high-resolution microscopy measurements (atomic force microscopy and field emission scanning electron microscopy), this approach provided detail on the nucleation and growth mechanisms of Ag and Pt on SWNTs under electrochemical control. In particular, Ag growth was found to be rapid and progressive with an increasing nanoparticle density with time, whereas Pt deposition was characterized by lower nucleation densities and slower growth rates with a tendency for larger particles to be produced over long times.     

Electronic properties of single-walled carbon nanotubes inside cyclic supermolecules

Possible ways for manipulating carbon nanotubes (CNTs) with cyclic supermolecules are studied using density functional theory. Electronic structure calculations with structure optimizations have been performed for the (4,4) and (8,0) single-walled carbon nanotubes (SWNTs) complexed with crown ethers as well as for the (4,0) SWNT with beta-cyclodextrin. A slight polarization of charge in both the nanotube and the supermolecule is observed upon rotaxane complexation, but the interaction is mainly repulsive, and the systems stay 2.8-3.5 A apart. The supermolecule does not affect the electronic band structure of the nanotube significantly within such a configuration. The situation differs noticeably for chemically cross-linked SWNTs and crown ethers, where a peak arises at the Fermi energy in the density of states. As a result, the band gap of semiconducting CNT(8,0) (0.5 eV) vanishes, and a new conduction channel opens for the metallic CNT(4,4).     

Light-controlled single-walled carbon nanotube dispersions in aqueous solution

We have succeeded in dispersing single-walled carbon nanotubes (SWNTs) into an aqueous solution of poly(ethylene glycol)-terminated malachite green derivative (PEG-MG) through simple sonication. It was found that UV exposure caused reaggregation of these predispersed SWNTs in the same aqueous medium, as adsorbed PEG-MG photochromic chains could be effectively photocleavaged from the nanotube surface. The observed light-controlled dispersion and reaggragation of SWNTs in the aqueous solution should facilitate the development of SWNT dispersions with a controllable dispersity for potential applications.     

Constrained iron catalysts for single-walled carbon nanotube growth

The diameter of single walled carbon nanotubes (SWNTs) determines the electronic properties of the nanotube. The diameter of carbon nanotubes is dictated by the diameter of the catalyst particle. Here we describe the use of iron nanoparticles synthesized within the Dps protein cage as catalysts for the growth of single-walled carbon nanotubes. The discrete iron particles synthesized within the Dps protein cages when used as catalyst particles gives rise to single-walled carbon nanotubes with a limited diameter distribution.     

Human fibrinogen adsorption onto single-walled carbon nanotube films

The adsorption behavior of human fibrinogen (Hfg) on single-walled carbon nanotube (SWNT) films was investigated using scanning electron microscopy (SEM) and near edge X-ray absorption fine structure (NEXAFS) spectroscopy. It was shown in the SEM images that fibrinogen was adsorbed strongly on the surface of SWNT when the samples were incubated in the Hfg solutions for 10 min. The dependence of adsorption on the concentration of fibrinogen was also investigated and it was found that adsorption increased with increasing concentration. In order to further explore the adsorption of fibrinogen on SWNT surface, NEXAFS spectra were obtained at the N K-edge and the C K-edge. The results confirmed the conclusion regarding the dependence of adsorption on fibrinogen concentration. It is demonstrated that, due to its high sensitivity to the surface elements, NEXAFS spectroscopy is a powerful tool to investigate the adsorption of fibrinogen on SWNT films.     

Light-induced dielectric transparency in single-walled carbon nanotube films

Light-induced difference THz spectroscopy was used to investigate the dielectric response of free-stand single-walled carbon nanotubes (SWCNTs) films in THz region. We observed an enhanced transmission of the peak-signal of THz wave through SWCNTs films under 800 nm pump. In frequency domain, the transparency came from 0.5 to 2.1 THz and the absorption was in 2.1–3.0 THz region. The pump power dependency of the transmission showed this was a nonlinear effect. The dielectric constant response of the SWCNTs films was analyzed theoretically. The analysis suggests that the nonlinear optical properties stem from two factors, which are Drude and Lorentz term for metallic and semiconducting SWCNTs, respectively.     

Optical properties of ultrashort semiconducting single-walled carbon nanotube capsules down to sub-10 nm

Single-walled carbon nanotubes (SWNTs) are typically long (greater than or approximately equal 100 nm) and have been well established as novel quasi one-dimensional systems with interesting electrical, mechanical, and optical properties. Here, quasi zero-dimensional SWNTs with finite lengths down to the molecular scale (7.5 nm in average) were obtained by length separation using a density gradient ultracentrifugation method. Different sedimentation rates of nanotubes with different lengths in a density gradient were taken advantage of to sort SWNTs according to length. Optical experiments on the SWNT fractions revealed that the UV-vis-NIR absorption and photoluminescence peaks of the ultrashort SWNTs blue-shift up to approximately 30 meV compared to long nanotubes, owing to quantum confinement effects along the length of ultrashort SWNTs. These nanotube capsules essentially correspond to SWNT quantum dots.     

A systematic study of the electrochemical determination of hydrogen peroxide at single-walled carbon nanotube ensemble networks

The electrochemical detection of one of the most sought after analytical targets has been studied at single-walled carbon nanotube ensemble networks, which are electrically wired via an underlying electrode substrate. A range of parameters and their effect on the electro–analytical detection of hydrogen peroxide have been explored which includes heterogeneity, role of the underlying electrode, electrode pre-treatment and analytical performance. This work provides researches with an overall view of the various parameters, which may affect the electro–analytical detection of hydrogen peroxide at native carbon nanotubes before modification with electro–catalytic materials allowing the assignment of the true origin of electro–catalysis to be properly assigned.     

Electrochemical impedance spectroscopy at single-walled carbon nanotube network ultramicroelectrodes

Electrochemical impedance spectroscopy (EIS), coupled with chemical vapour deposition (CVD) grown single-walled carbon nanotube (SWNT) network disk-shaped ultramicroelectrodes (UMEs), gives stable, very well-defined and highly reproducible EIS responses for electrolysis of a simple outer sphere redox couple (FcTMA^+/2+). The resulting EIS data can be fitted accurately using a simple electrical circuit model, enabling information on double-layer capacitance, diffusion coefficient of the electroactive species and the rate constant of ET (k⁰) to be extracted in a single EIS experiment. These values are replicated for a range of mediator concentrations and UME sizes (in the range 25–100 μm diameter) demonstrating the robustness of the method. These initial studies bode well for impedance based electroanalysis using SWNT network UMEs.     

Free-standing highly conductive transparent ultrathin single-walled carbon nanotube films

Transparent and conductive single-walled carbon nanotube (SWNT) films are of great importance to a number of applications such as optical and electronic devices. Here, we describe a simple approach for preparing free-standing highly conductive transparent SWNT films with a 20-150 nm thickness by spray coating from surfactant-dispersed aqueous solutions of SWNTs synthesized by an improved floating-catalyst growth method. After the HNO(3) treatment, dipping the SWNT films supporting on glass substrates in water resulted in a quick and nondestructive self-release to form free-standing ultrathin SWNT films on the water surface. The obtained films have sufficiently high transmittance (i.e., 95%), a very low sheet resistance (i.e., ～120 Ω/sq), and a small average surface roughness (i.e., ～3.5 nm for a displayed 10 × 10 μm area). Furthermore, the floating SWNT films on the water surface were easily transferred to any substrates of interest, without intense mechanical and chemical treatments, to preserve their original sizes and network structures. For example, the transferred SWNT films on poly(ethylene terephthalate) films are mechanically flexible, which is a great advantage over conventional indium-tin oxide (ITO) and therefore strongly promise to be "post ITO" for many applications.     

Charge transfer from metallic single-walled carbon nanotube sensor arrays

This paper explores the possibility of using arrays of metallic carbon nanotubes as sensors. Unlike their semiconducting counterparts, single-walled carbon nanotube arrays or networks that are dominated by metallic conduction pathways have not been investigated for their environmental sensitivity. In this work, we demonstrate transduction of molecular adsorption via charge transfer through predominantly metallic single-walled carbon nanotubes. Raman spectroscopy and electric field dependent transport confirm that signal transduction takes place through primarily large diameter metallic nanotubes. This unique signal transduction mechanism might have implications for novel sensors. The scaling of the signal with array impedance is well described using an irreversible binding model developed previously. The arrays have several advantages including a simple, two-electrode fabrication, rapid regeneration, and a responsivity that scales predictably and linearly with the number of adsorption sites. An array-assisted hydrolysis of reactive analytes is found to regenerate the nanotube surface from hydrolyzable species which include important organophosphate nerve agents.     

Hydrogen-bonded and physisorbed CO in single-walled carbon nanotube bundles

Fourier transform infrared spectroscopy is used to study CO adsorption in single-walled carbon nanotubes. Evidence for adsorption in endohedral and groove/external surface sites is presented through displacement studies involving both CO and CO2. Blue-shifted CO stretching frequencies also indicate that CO hydrogen bonds to hydroxyl functionalities created on the nanotubes by acid purification steps. N2 surface area measurements are used to further understand the porosity of the nanotube samples and to help explain the spectroscopic results.     

Electronic structure of carbon nanotube network

Covalently cross-linked carbon nanotube network has been synthesized using spark plasma sintering followed by nitric acid treatment. EPR investigation of its electronic structure in comparison with pristine carbon nanotubes has revealed that the covalent cross-linking leads to a decrease in the number of paramagnetic centers, while the oxidation results in an increase in their number. The oxidation affects the cross-linked and pristine materials in a different manner     

Hierarchical structure of carbon nanotube networks

The hierarchical structure of semidilute suspensions of single-walled carbon nanotubes in polymeric matrices, studied by the use of ultrasmall and small angle neutron scattering, indicates an aggregate size that is independent on both nanotube concentration and polymer matrix and a mesh within the floc that becomes slightly denser with increasing nanotube concentration. The number of clusters grows linearly with concentration of nanotubes. These structural parameters suggest that the interactions between the flocs dictate the concentration-dependent elastic strength scaling of the network, with the absolute values of the specific elastic strength being inversely related to the percolation threshold.     

Electrophoretic analysis and purification of fluorescent single-walled carbon nanotube fragments

Arc-synthesized single-walled carbon nanotubes have been purified through preparative electrophoresis in agarose gel and glass bead matrixes. Two major impurities were isolated: fluorescent carbon and short tubular carbon. Analysis of these two classes of impurities was done. The methods described may be readily extended to the separation of other water-soluble nanoparticles. The separated fluorescent carbon and short tubule carbon species promise to be interesting nanomaterials in their own right.     

Direct fabrication of single-walled carbon nanotube macro-films on flexible substrates

We employed a floating chemical vapor deposition technique and applied a liquid (solution)-free precursor system for the fabrication of single-walled carbon nanotube macro-films on various flexible substrates from metallic foils to polymer films.     

Spectroscopic investigation of conjugated polymer/single-walled carbon nanotube interactions

Composite materials, based on single-walled carbon nanotubes and a poly(p-phenylene vinylene) derivative, show an interaction between the components capable of solubilising the nanotubes, which has not been otherwise achieved. Here these materials are characterised by electron microscopy, and optical and vibrational spectroscopy. The spectroscopic behaviour of the polymer is seen to be dramatically affected, which is attributed to conformational changes due to the effect of the nanotubes.