Formation of gold nanoparticles in aqueous solutions of cellulose derivatives and a study of the properties of these nanoparticles

It was demonstrated that gold nanoparticles can be obtained by using cellulose ethers, methyl hydroxyethyl cellulose and carboxymethylcellulose as reducing agents and also as nanoparticle stabilizers. IR spectral studies revealed a difference between the mechanisms of reduction and nanoparticle stabilization by these cellulose derivatives. A scanning tunnel microscope was used to examine composite films formed from nanoparticle dispersions on the surface of polycrystalline gold films. It was demonstrated that, in the case of gold nanoparticles, densely packed globular structures are formed in a carboxymethyl cellulose solution. A fibril-like structure of layers is formed in the Au+(methyl hydroxyethyl cellulose) system.     

Production of Gold nanoparticles in aqueous solutions of cellulose derivatives

It is shown that gold nanoparticles can be produced using cellulose ethers, methylhydroxyethyl cellulose, and carboxymethyl cellulose as reducing agents that also play the role of nanoparticle stabilizers. Depending on the synthesis conditions, nanoparticle sizes vary in the range of 20–100 nm. The application of carboxymethyl cellulose as a stabilizer may give rise to the formation of a bimodal ensemble of nanoparticles with sizes of 4–5 and 30–40 nm. The differences in the mechanisms for the reduction and stabilization of gold nanoparticles in the presence of these cellulose derivatives are established by IR spectroscopy. The obtained colloidal dispersions of gold nanoparticles remain stable for a long time.     

Synthesis of cellulose–metal nanoparticle composites: development and comparison of different protocols

Deposition of nanoparticles on the surface of a variety of materials is a subject of great interest due to their potential applications in electronic devices, sensing, catalysis and bio-medical sciences. In this context, we have explored and compared various methodologies to generate gold and silver nanoparticles on the surface of cellulose fibers. It was found that boiling of the cellulose fibers in alkaline solution of gold and silver salts led to the formation and immobilization of gold and silver nanoparticles. However, in case of lecithin treated and thiol-modified cellulose fibers, high temperature was not essentially required for the formation and deposition of nanoparticles on cellulose substrate. In both these cases, fairly uniform metal nanoparticles were obtained in good yields (~43 wt% gold loading in case of thiol modified cellulose fibers) at room temperature. Borohydride-reduction method resulted in relatively lower loading (~22 wt%) with a wide size distribution of gold and silver nanoparticles on cellulose fibers. All these nanoparticle–cellulose composites were thoroughly characterized using scanning electron microscopy, energy dispersive X-ray, Fourier transform infrared spectroscopy, UV–visible spectroscopy, and elemental analyzer. Thiol modified cellulose–gold nanoparticle composites served as active catalysts in the reduction of 4-nitrophenol into 4-aminophenol.     

Reactivity of nanocolloidal particles gamma-Fe2O3 at charged interfaces. Part 2. Electrochemical conversion. Role of the electrode material

In this paper we are interested in the reactivity of magnetic nanoparticles at the electrode involved in the electrochemical synthesis of magnetic and conductive liquids. The reactivity of charged colloidal particles occurs in two steps, first the approach toward the electrode with a possible adsorption phenomenon and secondly the electron transfer. In this paper we focus on the electrochemical behaviour of well-defined gamma-Fe(2)O(3) nanoparticles at a gold and at a mercury electrode. Particles can be electrochemically reduced at the two electrodes and can be dispersed into mercury at a highly negative potential. Here, we probe in particular the properties of nanoreactor of the particles, that is to say, the possible conservation of their size after they have undergone the electrochemical process. By correlating complementary techniques (here atomic force microscopy (AFM) observations, Raman spectroscopy and cyclic voltammetry on gold electrode) and by studying the magnetic properties of the material obtained after reduction of the particles on a mercury electrode, we are able to probe both the chemical nature and the physical state of the particles once transformed. Experimental results show that under specific conditions, the particles are individually converted into iron, which justifies their use for preparing a liquid with both magnetic properties and properties of electron conduction.     

Nucleation and growth of gold nanoparticles on adsorption layers and in ultrathin films of poly(2-vinylpyridine)

Peculiarities of the nucleation and growth of gold nanoparticles on adsorption layers and in ultrathin films of poly(2-vinylpyridine) (PVP) in the chemical reduction of sorbed Au(III) ions and the consequent thermal treatment of systems are studied by X-ray photoelectron spectroscopy and optical spectroscopy. It is shown that nitrogens of PVP pyridine groups coordinate gold atoms. It is revealed that, even at relatively short contact between PVP film saturated with chloroauric acid and the solution of strong reductant NaBH₄, Au(III) ions are reduced to metal. As a result, quasi-metal gold particles are formed. At the same time, when exposing a PVP-Au system to the solution of weak reductant NH₂OH, the process of reduction proceeds in several stages. First, Au(III) ions are reduced to Au(I) followed by the reduction to Au(0) as a result of disproportionation reaction. It is demonstrated for the first time that, upon using NH₂OH, the rate of reduction, as well as the structure of prepared PVP-Au nanocomposite films depends to substantial extent on solution pH. Prolonged annealing of ultrathin nanocomposites at 150 °C, i.e., above the glass transition temperature of polymer matrix, leads to an increase in the sizes of metal particles and the formation of systems characterized by intense absorption within the 500–600-nm range due to the localized plasmon resonance of gold nanoparticles.     

Planar array of 1D gold nanoparticles on ridge-and-valley structured carbon

For fabrication of a planar array of 1D chains of gold nanoparticles prepared by a chemical process, the faceted (110) planes of sodium chloride crystals were used as templates to produce nanoscale ridge-and-valley structured carbon layers by a vacuum process. When these carbon layers loaded on copper grids were dipped in toluene solution of 3.4 nm gold nanoparticles followed by natural dry, a planar array of 1D chains of gold nanoparticles were formed on carbon layers, where the nanoparticles were immobilized predominantly in valleys and partly on ridges of carbon layers.     

Effect of the size of colloidal gold nanoparticles on the physical parameters of nanocomposite microcapsule shells

Polyelectrolyte shells of nanocomposite microcapsules containing colloidal gold nanoparticles of different diameters (5, 10, or 20 nm) are formed by the polyion assembly procedure. Microcapsules with different numbers of layers and structures are studied by transmission electron microscopy, atomic force microscopy, and confocal microscopy. The values of the thickness and roughness of microcapsule shells are determined and the dependence of these parameters on the size of gold nanoparticles constituting shells is investigated. It is established that the concentration of nanoparticles in polyelectrolyte shells of microcapsules decreases with an increase in particle diameter.     

Study of catalytic action of micro-particles and synthesized nanoparticles of CuS on cellulose pyrolysis

The catalytic action of copper sulfide (CuS) micro-particles and as-synthesized nanoparticles was studied on cellulose pyrolysis. The market procured CuS powder was used as micro-particles without any treatment. The CuS nanoparticles were synthesized at ambient temperature by simple wet chemical technique. Before using the micro-particles and nanoparticles for catalytic study, they were comprehensively characterized. The thermal analysis including catalytic properties of both the micro-particles and nanoparticles of CuS on cellulose pyrolysis was studied employing thermogravimetric (TG), differential thermogravimetric, and differential thermal analysis techniques. Prior to the study as catalyst in cellulose pyrolysis, the CuS micro- and nanoparticles were characterized by thermal analysis in inert atmosphere. The TG curves showed two steps and five steps decomposition having total mass loss of 29 and 42 % in case of CuS micro- and as-synthesized nanoparticles, respectively. The catalytic study in cellulose pyrolysis showed that the decomposition commences at temperature 295 °C for pure cellulose, 270 °C for cellulose mixed with 3 % CuS micro-particles and 205 °C for cellulose mixed with 3 % CuS nanoparticles. It clearly showed that the decomposition starting temperature decreased by 65 °C in case of cellulose mixed with CuS nanoparticles compared to cellulose mixed with CuS micro-particles. Thus, CuS nanoparticles act as better catalyst then CuS micro-particles in cellulose pyrolysis. The obtained results are deliberated in details.     

Cationic Spherical Polyelectrolyte Brushes as Nanoreactors for the Generation of Gold Particles

Summary: If long polyelectrolyte chains are attached densely to colloidal latex particles, a spherical polyelectrolyte brush results. These spherical polyelectrolytes are dispersed in water and carry a high charge. We demonstrate that these systems can be used to immobilize ions of heavy metals, such as gold, as counter‐ions. Reduction of these ions leads to metallic nanoparticles. In this way the brush layer attached to the surface of the particles becomes a “nanoreactor” that may be used for chemical conversions of the metal ions. We show that the reduction of AuClequation/tex2gif-stack-1.gif ions within these nanoreactors leads to well‐defined and rather monodisperse gold nanoparticles that are attached to the surface of the core. A stable dispersion of polymeric core particles with attached nanoparticles results. All results reported here suggest that chemical reactions of ions immobilized in spherical polyelectrolyte brushes provide a new route to composite particles of inorganic and organic materials.

Transmission electron micrograph of gold particles on a core‐shell system.     

Size-dependent melting of silica-encapsulated gold nanoparticles

We report on the size dependence of the melting temperature of silica-encapsulated gold nanoparticles. The melting point was determined using differential thermal analysis (DTA) coupled to thermal gravimetric analysis (TGA) techniques. The small gold particles, with sizes ranging from 1.5 to 20 nm, were synthesized using radiolytic and chemical reduction procedures and then coated with porous silica shells to isolate the particles from one another. The resulting silica-encapsulated gold particles show clear melting endotherms in the DTA scan with no accompanying weight loss of the material in the TGA examination. The silica shell acts as a nanocrucible for the melting gold with little effect on the melting temperature itself, even though the analytical procedure destroys the particles once they melt. Phenomenological thermodynamic predictions of the size dependence of the melting point of gold agree with the experimental observation. Implications of these observations to the self-diffusion coefficient of gold in the nanoparticles are discussed, especially as they relate to the spontaneous alloying of core-shell bimetallic particles.     

Formation and Properties of Sol-Gel Films and Glasses with Ultrafine Metal and Semiconductor Particles

A novel method of fabrication of silica-based sol-gel films and glasses containing small semiconductor particles was developed. A series of films and glasses with nanoparticles of copper chalcogenides (CuS, Cu₂Se, CuInS₂) and metal particles (Cu) were fabricated through the chemical transformation of precursors incorporated into a sol-gel derived matrix. The properties of the nanoparticles studied by means of XRD, XPS, TEM and optical spectroscopy are provided both by size effects and the chemical nature of surface states and can be controlled at different steps of chemical treatment.     

Quasi-one-dimensional arrangement of silver nanoparticles templated by cellulose microfibrils

We demonstrate a simple, facile approach to the deposition of silver nanoparticles on the surface of cellulose microfibrils with a quasi-one-dimensional arrangement. The process involves the generation of aldehyde groups by oxidizing the surface of cellulose microfibrils and then the assembly of silver nanoparticles on the surface by means of the silver mirror reaction. The linear nature of the microfibrils and the relatively uniform surface chemical modification result in a uniform linear distribution of silver particles along the microfibrils. The effects of various reaction parameters, such as the reaction time for the reduction process and employed starting materials, have been investigated by transmission electron microscopy (TEM) and ultraviolet-visible spectroscopy. Additionally, the products were examined for their electric current-voltage characteristics, the results showing that these materials had an electric conductivity of approximately 5 S/cm, being different from either the oxidated cellulose or bulk silver materials by many orders of magnitude.     

Equilibrium morphology of face-centered cubic gold nanoparticles >3 nm and the shape changes induced by temperature

Many of the unique properties of metallic nanoparticles are determined not only by their finite size but also by their shape, defined by the crystallographic orientation of the surface facets. These surfaces (and therefore the nanoparticles themselves) may differ in a number of ways, including surface atom densities, electronic structure, bonding, chemical reactivities, and thermodynamic properties. In the case of gold, it is known that the melting temperature of nanoparticles strongly depends on the crystal size and that the shape may alter considerably (and yet somewhat unpredictably) during annealing. In this work we use first principle calculations and a thermodynamic model to investigate the morphology of gold nanoparticles in the range 3-100 nm. The results predict that the equilibrium shape of gold nanoparticles is a modified truncated octahedron and that the (size-dependent) melting of such particles is preceded by a significant change in the nanoparticle's morphology.     

Layered magnetite nanoparticles modification – synthesis,structure, and magnetic characterization

Core-shell and multilayered nanoparticles based on magnetite core with different metallic spacing and over-layers are prepared in one pot synthesis and characterized. The spacer layers were made from Au, Cu or Ag precursors. The nanoparticles were fabricated by a modified chemical seed based method. The obtained nanoparticles were examined by X-ray diffraction, Energy-dispersive X-ray spectroscopy, Transmission Electron Microscopy, Differential Scanning Calorimetry and Infrared spectroscopy. Magnetic properties of the nanoparticles were tested by Mössbauer spectroscopy and Magnetometry. Magnetization and Mössbauer measurements show that the presence of the metallic layers influences the magnetic state of the particles. XRD and EDX confirm layered structures of nanoparticles. Proposed synthesis allows for fabrication of layered particles with controlled morphology and register properties changes which are related to the nature of each subsequent layer.     

Surface enhanced Raman scattering from layered assemblies of close-packed gold nanoparticles

A synthetic method of ordering hydrophilic gold nanoparticles into a close-packed two-dimensional array at a hexane-water interface and subsequent transferring of such structure onto a solid substrate is described. By repeating the transfer process, multilayered gold nanoparticle films are formed without need of linker molecules. Their surface enhanced Raman scattering (SERS) efficiencies are compared as a function of the number of layers. It is shown that both the number of layers and the particle size contribute to SERS phenomenon. Judging from the noticeable dependence of SERS efficiency on the nanometer scale architecture, the close-packed nanoparticle formation at an immiscible interface presents a facile route to the preparation of highly active and relatively clean SERS substrates by controlling both the particle size and the film thickness. Among the investigated samples, the gold nanoparticle film assembled with quintuple layers of 30 nm diameter particles showed the maximum SERS efficiency.     

Stoichiometric functionalization of gold nanoparticles in solution through a free radical polymerization approach

A new simple concept for the stoichiometrical functionalization of nanoparticles based on free radical polymerization of vinyl protected nanoparticles is presented. To demonstrate this concept 2-bis(4-vinylphenyl)disulfane was synthesized and used in the synthesis of gold nanoparticles, leading to 4-vinylthiophenol functionalized nanoparticles. Simple free radical polymerization of these particles initiated by 4,4'-azobis-(4-cyanopentanoic acid) delivered nanoparticles with a single carboxyl group. These monofunctionalized gold nanoparticles were utilized for chemical preparation of gold nanoparticle dimers as well as for construction of gold nanoparticle arrays via binding to polyallylamine.     

Electrochemical Fabrication of Nanostructured Surfaces for Enhanced Response

The objective of this work is to explore approaches to enhance electrochemical signals through sequential deposition and capping of gold particles. Gold nanoparticles are electrodeposited from KAuCl₄ solution under potentiostatic conditions on glassy carbon substrates. The number density of the nanoparticles is increased by multiple deposition steps. To prevent secondary nucleation processes, the nanoparticles are isolated after each potentiostatic deposition step by self‐assembled monolayers (SAMs) of decanethiol or mercaptoethanol. The increasing number of particles during five deposition/protection rounds is monitored by assembling electroactive SAMs using a ferrocene‐labeled alkanethiol. A precise estimation of the surface area of the gold nanoparticles by formation of an oxide layer on gold is difficult due to oxidation of the glassy carbon surface. As an alternative approach, the charge flow of the electroactive SAM is used for surface measurement of the gold surface area. A sixfold increase in the redox signal in comparison to a bulk gold surface is observed, and this increase in redox signal is particularly notable given that the surface area of the deposited nanoparticles is only a fraction of the bulk gold surface. After five rounds of deposition there is a gold loading of 1.94 μg cm^?2 of the deposited nanoparticles as compared to 23.68 μg cm^?2 for the bulk gold surface. Remarkably, however, the surface coverage of the ferrocene alkanethiol on the bulk material is only 10 % of that achieved on the deposited nanoparticles. This enhancement in signal of the nanoparticle‐modified surface in comparison to bulk gold is thus demonstrated not to be attributable to an increase in surface area, but rather to the inherent properties of the surface atoms of the nanoparticles, which are more reactive than the surface atoms of the bulk material.     

A general method for the controlled embedding of nanoparticles in silica colloids

A novel method for the controlled embedding of multiple nanoparticles of various materials, such as gold nanoparticles, quantum dots, and magnetic nanoparticles, in silica colloids is presented. After adsorption of the amphiphilic polymer poly(vinylpyrrolidone) on hydrophobic or hydrophilic stabilized nanoparticles, these are adsorbed on silica spheres and covered by variable-thickness silica shells. This silica coating protects the embedded nanoparticles against chemical transformations, which is of crucial importance for the biocompatibility of particles containing toxic elements. Moreover, it is found that the optical properties of the nanoparticles are retained. Possible applications of multicore particles are briefly discussed.     

Electrochemistry of conductive polymers 39. Contacts between conducting polymers and noble metal nanoparticles studied by current-sensing atomic force microscopy

Electrical properties of contacts formed between conducting polymers and noble metal nanoparticles have been examined using current-sensing atomic force microscopy (CS-AFM). Contacts formed between electrochemically prepared pi-conjugated polymer films such as polypyrrole (PPy), poly(3-methylthiophene) (P3MeT), as well as poly(3,4-ethylenedioxythiophene) (PEDOT) and noble metal nanoparticles including platinum (Pt), gold (Au), and silver (Ag) have been examined. The Pt nanoparticles were electrochemically deposited on a pre-coated PPy film surface by reducing a platinum precursor (PtCl62-) at a constant potential. Both current and scanning electron microscopic images of the film showed the presence of Pt islands. The Au and Ag nanoparticles were dispersed on the P3MeT and PEDOT film surfaces simply by dipping the polymer films into colloid solutions containing Au or Ag particles for specified periods (5 to approximately 10 min). The deposition of Au or Ag particles resulted from either their physical adsorption or chemical bonding between particles and the polymer surface depending on the polymer. When compared with PPy, P3MeT and PEDOT showed a stronger binding to Au or Ag nanoparticles when dipped in their colloidal solutions for the same period. This indicates that Au and Ag particles are predominantly linked with the sulfur atoms via chemical bonding. Of the two, PEDOT was more conductive at the sites where the particles are connected to the polymer. It appears that PEDOT has better aligned sulfur atoms on the surface and is strongly bonded to Au and Ag nanoparticles due to their strong affinity to gold and silver. The current-voltage curves obtained at the metal islands demonstrate that the contacts between these metal islands and polymers are ohmic.     

Metal nanoparticles on polymer surfaces. 7. The growth kinetics of gold nanoparticles embedded into surface layers of glassy polymers

It has been shown that citrate gold nanoparticles can be embedded (partly immersed) into the surface layers of different glassy polymers with subsequent seeded growth of the particles in an aqueous chloroauric acid–hydroxylamine mixed solution. Quantitative data have been obtained on the seeded growth kinetics, and it has been shown that its rate-limiting stage is the diffusion of metal ions from the bulk solution to the surface of gold nanoparticles.