Aggregate formation of binary nonionic surfactant mixtures on hydrophilic surfaces

Adsorption of surfactant mixtures on hydrophilic solid surfaces is of considerable theoretical and practical importance. Cooperative adsorption of nonionic surfactant mixtures of nonyl phenol ethoxylated decyl ether (NP-10) and n-dodecyl-beta-d-maltoside (DM) on silica and alumina was investigated in this study with a view to elucidate the nanostructures of their aggregates. In the mixed system, DM is identified to be the "active" component and NP-10 is the "passive" one for the process of adsorption on alumina, while their roles are reversed for silica. The difference in the adsorptive interactions of the surfactants with the above minerals is attributed to the differences in the molecular structures of the surfactants. To better understand the interaction between surfactants at solid/solution interface from a molecular structure point of view, the nanostructures of mixed surface aggregates have been quantitatively predicted for the first time using a modified packing parameter: the structures are spherical or cylindrical on silica and those on alumina undergo a spherical-to-cylindrical-to-bilayer transition with the addition of the active component. This work offers a new way for developing of structure-performance relationships.     

A model for the cooperative adsorption of surfactant mixtures on solid surfaces

Adsorption of surfactant mixtures on solids is of considerable theoretical and practical importance. In this study, cooperative adsorption of surfactant mixtures of nonyl phenol ethoxylated decyl ether (NP-10) and n-dodecyl-beta-D-maltoside (DM) on silica and alumina has been investigated as a function of the distribution of individual surfactants between solution and solid surface. In the mixed adsorption process, DM is identified to be the "active" adsorbing component and NP is the "passive" co-adsorbing one in the process of adsorption on alumina, while their roles are reversed on silica. A modified model has been proposed to quantify the adsorption behavior of surfactant mixtures and to obtain information in terms of aggregation number and standard free energy for surface aggregation. This model is the first model applied to the aggregation of the surfactant mixture at the solid/solution interfaces.     

Study of mixtures of n-dodecyl-beta-D-maltoside with anionic, cationic, and nonionic surfactant in aqueous solutions using surface tension and fluorescence techniques

Surfactants of practical interest are invariably mixtures of different types. In this study, mixtures of sugar-based n-dodecyl-beta-D-maltoside with cationic dodecyltrimethylammonium bromide, anionic sodium dodecylsulfate, and nonionic pentaethyleneglycol monododecyl ether in solution, with and without supporting electrolyte, have been studied using surface tension and fluorescence spectroscopic techniques. Interaction parameters and mole fraction of components in mixed micelles were calculated using regular solution theory. The magnitude of interactions between n-dodecyl-beta-D-maltoside and other surfactants followed the order anionic/nonionic > cationic/nonionic > nonionic/nonionic mixtures. Since all surfactants have the same hydrophobic groups, strengths of interactions are attributed to the structures of hydrophilic headgroups. Electrolyte reduced synergism between n-dodecyl-beta-D-maltoside and ionic surfactant due to charge neutralization. Industrial sugar-based surfactant, dodecyl polyglucoside, yielded results similar to that with dodecyl maltoside, implying that tested commercial alkyl polyglucosides are similar to the pure laboratory samples in synergistic interactions with other surfactants. Fluorescence study not only supported the cmc results using tensiometry, but showed that interfaces of all the above mixed micelle/solution interfaces are mildly hydrophobic. Based on these results, an attempt is made to discover the nature of interactions to be a combination of intermolecular potential energies and free energy due to packing of surfactant molecules in micelles.     

Abnormal micellar growth in sugar-based and ethoxylated nonionic surfactants and their mixtures in dilute regimes using analytical ultracentrifugation

To develop structure-property relationships for surfactants that control their adsorption, solubilization, and micellization behavior in mixed systems and to develop predictive models based on such relationships, it is necessary to acquire quantitative information on various species present in these complex systems. The analytical ultracentrifugation technique is selected for the first time to characterize the species present in mixed micellar solutions due to its powerful ability to separate particles on the basis of their size and shape. Two nonionic surfactants, n-dodecyl-beta-D-maltoside (DM) and nonyl phenol ethoxylated decyl ether (NP-10), and their 1:1 molar ratio mixture were investigated in this study. Micelles of the nonionic surfactants and their mixture are asymmetrical in shape at the critical micelle concentration (cmc). Interestingly, unlike ionic surfactants, the micellar growths of the nonionic surfactants were found to occur at concentrations immediately above the cmc. The results from both sedimentation velocity and sedimentation equilibrium experiments suggest coexistence of two types of micelles in nonyl phenol ethoxylated decyl ether solutions and in its mixture with n-dodecyl-beta-D-maltoside, while only one micellar species is present in n-dodecyl-beta-D-maltoside solutions. Type 1 micelles were primary micelles at the cmc, while type 2 micelles were elongated micelles. The differences in the micellar shapes of n-dodecyl-beta-D-maltoside and nonyl phenol ethoxylated decyl ether are attributed to packing parameters detected by their molecular structures.     

Adsorption of mixtures of nonionic sugar-based surfactants with other surfactants at solid/liquid interfaces I. Adsorption of n-dodecyl-beta-D-maltoside with anionic sodium dodecyl sulfate on alumina

Sugar-based surfactants can be synthesized from renewable materials and are environmentally benign. They have some unique solution and interfacial properties and have potential applications in a wide variety of processes, and there is a need for corresponding information on their behavior at various interfaces. In this study, co-adsorption of nonionic sugar-based n-dodecyl-beta-D-maltoside (DM) and anionic sodium dodecyl sulfate (SDS) on alumina was studied as a function of mixing ratios and solution pHs. It is found that at solid-liquid interface, depending on the solid type and the solution conditions, there are various interactions that dictate synergy or antagonism. At pH 6 where alumina is positively charged, marked synergistic effects between DM and SDS were observed, while at pH 11 where alumina is negatively charged, SDS shows antagonistic adsorption effects with DM. The ratios of surfactant components on solids change as a function of surfactant structure and concentrations as well, indicating various interactions at solid/liquid interface under different conditions that can be utilized for many industrial processes.     

Surface properties of mixtures of surface-active sugar derivatives with ionic surfactants: theoretical and experimental investigations

Surface properties of systems that are mixtures of ionic surfactants and sugar derivatives-anionic surfactant sodium dodecyl sulfate and n-dodecyl-beta-D-maltoside (SDS/DM) and cationic surfactant dodecyltrimethylammonium bromide and n-dodecyl-beta-D-glucoside (DTABr/DG)-were investigated. The experimental results obtained from measurements of surface tension of mixtures with various ratio of ionic to nonionic components were analyzed by two independent theories. First is Motomura theory, derived from the Gibbs-Duhem equation, allowing for indirect evaluation of the composition of mixed monolayers and the Gibbs energies of adsorption, corresponding to mutual interaction between surfactants in mixed adsorbed film. As second theory we used our newly developed theoretical model of adsorption of ionic-nonionic surfactant mixtures. Using this approach, we were able to describe the experimental surface tension isotherms for mixtures of surface-active sugar derivatives and ionic surfactants. We obtained a good agreement with experimental data using the same set of model parameters for a whole range of studied compositions of a given surfactant mixture. The values of surface excess calculated from both theories agreed with each other with a reasonable accuracy. However, the newly developed model of adsorption of ionic-nonionic surfactant mixtures has the advantage of straightforward determination of surface layer composition. By the solution of equations of adsorption, one can obtain directly the values of surface excess of all components (surfactant ions, counterions, and nonionic surfactants molecules), which are present in the investigated system.     

Use of surfactants to remove water-based inks from plastic film: effect of calcium ion concentration and length of surfactant hydrophobe

Effective plastic film deinking could permit the reuse of recycled polymer to produce clear film, reduce solid waste for landfills, reduce raw material demand for polymer production, and aid process economics. In this study, the deinking of a commercial polyethylene film printed with water-based ink was studied using surfactants in the presence of hardness ions (calcium ions) at various pH levels. The electrostatic properties of ink particles in a washing bath were also investigated. Synthetic anionic surfactant or fatty acid soap in the presence of calcium ions at alkaline pH levels was found to be nearly as effective at deinking as cationic, nonionic, or amphoteric surfactants alone. However, adding calcium ions decreases the deinking effectiveness of cationic, nonionic, and amphoteric surfactants. Increasing the length of the ionic surfactant hydrophobe enhances deinking. Zeta potential measurements showed that water-based ink particles in water reach the point of zero charge (PZC) at a pH of about 3.6, above which ink particles are negatively charged, so cationic surfactant tends to adsorb better on the ink than anionic surfactant above the PZC in the absence of calcium. As the cationic surfactant concentration is varied between 0.005 and 25 mM, the zeta potential of the ink particles reverses from negative to positive owing to adsorption of cationic surfactant. For anionic surfactants, added calcium probably forms a bridge between the negatively charged ink and the negatively charged surfactant head groups, which synergizes adsorption of the surfactant and aids deinking. In contrast, calcium competes for adsorption sites with cationic and nonionic surfactants, which inhibits deinking. All the surfactants studied here disperse ink particles effectively in the washing bath above pH 3 except for the ethoxylated amine surfactant.     

Competitive adsorption of nonionic surfactant and nonionic polymer on silica

Competitive adsorption of the nonionic polymer poly(ethylene oxide) (PEO) and the nonionic surfactant of the type poly(ethylene oxide) alkyl ether from aqueous solutions on a silica surface is examined. From one-component solutions, both species readily adsorb onto silica and, in the bulk of mixed (two-component) solutions, polymer-surfactant complexes are not observed. Because both species bind by the same mechanism to silica, subtle differences in layer structure, or other species-specific parameters, determine whether one or both of the species will adsorb. It was found that various surfactants can displace PEO up to a certain critical molecular weight. Surfactants with a high aggregation number, in bulk and on the surface, can displace PEO with a higher molar mass than surfactants with a low aggregation number. As the molar mass of the polymer increases, the time a surfactant needs to completely displace the polymer increases. We can explain both the existence of the critical molar mass and the decrease in adsorption kinetics with a shift in the critical surface association concentration (CSAC).     

Forces between silica surfaces with adsorbed cationic surfactants: influence of salt and added nonionic surfactants

Forces have been measured between silica surfaces with adsorbed surfactants by means of a bimorph surface force apparatus. The surfactants used are the cationic surfactant tetradecyltrimethylammonium bromide (TTAB) and the nonionic surfactant hexakis(ethylene glycol) mono-n-tetradecyl ether (C(14)E(6)) as well as mixtures of these two surfactants. The measurements were made at elevated pH, and the effect of salt was studied. At high pH the glass surface is highly charged, which increases the adsorption of TTAB. Despite the low adsorption generally seen for nonionic surfactants on silica at high pH, addition of C(14)E(6) has a considerable effect on the surface forces between two glass surfaces in a TTAB solution. The barrier force is hardly affected, but the adhesion is reduced remarkably. Also, addition of salt decreases the adhesion, but increases the barrier force. In the presence of salt, addition of C(14)E(6) also increases the thickness of the adsorbed layer. The force barrier height is also shown to be related to literature values for surface pressure data in these systems.     

Simultaneous potentiometric determination of cationic and ethoxylated nonionic surfactants in liquid cleaners and disinfectants

A sensitive potentiometric surfactant sensor based on a highly lipophilic 1,3-didecyl-2-methyl-imidazolium cation and a tetraphenylborate (TPB) antagonist ion was used as the end-point detector in ion-pair potentiometric surfactant titrations using sodium TPB as a titrant. Several analytical and technical grade cationic and ethoxylated nonionic surfactants (EONS) and mixtures of both were potentiometrically titrated.The sensor showed satisfactory analytical performances within a pH range of 3-10 and exhibited satisfactory selectivity for all CS and EONS investigated. Ionic strength did not influence the titration except at 0.1 M NaCl, in which a slight distortion of the second inflexion corresponded with the nonionic surfactant.Two-component combinations of four CS and three EONS were potentiometrically titrated using the sensor previously mentioned as the end-point detector. The quantities of the surfactants varied between 2 and 6 μmol for CS and 2.50 and 7.50 μmol for EONS. The known addition methodology was used for determination of the surfactant with considerably lower concentration in the mixture.Three commercial products containing cationic surfactants as disinfectants and nonionic surfactants were potentiometrically titrated, and the results for both type of surfactants were compared with those obtained with standard conventional methods.     

Adsorption isotherms of nonionic surfactants in SBA-15 measured by micro-column chromatography

In this work, micro-column liquid chromatography has been employed for the study of the adsorption of ethylene glucol monoether (C8E4) and pentaethylene glucol monoether (C10E5) nonionic surfactants into the nanopores of SBA-15 silica at two temperatures. The adsorption process for both the surfactants has been investigated in the range of concentration from very dilute solution to "just above" critical micelle concentration (CMC). The adsorption data for both the surfactants are characterized as typical LC-shaped isotherms with plateau near the CMC. A simple two-step adsorption model has been applied to represent an experimental data. An attempt to estimate the thickness of the surfactant layer in the pores, from the experimental data, has been made.     

Adsorption behavior of hydrophobin and hydrophobin/surfactant mixtures at the solid-solution interface

The adsorption of surface-active protein hydrophobin, HFBII, and HFBII/surfactant mixtures at the solid-solution interface has been studied by neutron reflectivity, NR. At the hydrophilic silicon surface, HFBII adsorbs reversibly in the form of a bilayer at the interface. HFBII adsorption dominates the coadsorption of HFBII with cationic and anionic surfactants hexadecyltrimethyl ammonium bromide, CTAB, and sodium dodecyl sulfate, SDS, at concentrations below the critical micellar concentration, cmc, of conventional cosurfactants. For surfactant concentrations above the cmc, HFBII/surfactant solution complex formation dominates and there is little HFBII adsorption. Above the cmc, CTAB replaces HFBII at the interface, but for SDS, there is no affinity for the anionic silicon surface hence there is no resultant adsorption. HFBII adsorbs onto a hydrophobic surface (established by an octadecyl trimethyl silane, OTS, layer on silicon) irreversibly as a monolayer, similar to what is observed at the air-water interface but with a different orientation at the interface. Below the cmc, SDS and CTAB have little impact upon the adsorbed layer of HFBII. For concentrations above the cmc, conventional surfactants (CTAB and SDS) displace most of the HFBII at the interface. For nonionic surfactant C(12)E(6), the pattern of adsorption is slightly different, and although some coadsorption at the interface takes place, C(12)E(6) has little impact on the HFBII adsorption.     

Colloidal properties of binary mixtures of a nonionic surfactant and monomeric or gemini cationic surfactants

The behavior of binary mixtures composed of a nonionic surfactant Triton X-100 (TX-100) and monomeric dodecyltrimethylammonium bromide (DTAB) or gemini N,N’-bis(N-dodecyl-N,N-dimethyl)-1,2-diammonium ethane dibromide (DDAB) cationic surfactants is studied upon micellization, wetting of Teflon and adsorption at the solution-air and solution-Teflon interfaces. The compositions of mixed micelles and adsorption layers, as well as the parameters of interaction between the surfactants (mixture components), were calculated using the Rubingh-Rosen model. For both mixtures, the interaction parameters are negative, and their absolute values increase in the following order: mixed micelles ≈ adsorption layers at the solution-air interface < adsorption layers at the solution-Teflon interface. The absolute values of the interaction parameters for TX-100-DDAB mixtures are larger than those for TX-100-DTAB mixtures. The adsorption of both mixtures on Teflon demonstrates synergistic effects. In case of TX-100-DDAB mixtures, the synergistic effects are also observed upon micellization, reduction of the surface tension, and wetting of Teflon. Original Russian Text ? O.A. Soboleva, G.A. Badun, B.D. Summ, 2006, published in Kolloidnyi Zhurnal, 2006, Vol. 68, No. 2, pp. 255–263. Deceased.     

Adsorption of ethoxylated cationic surfactants on self-assembled monolayers of alkanethiols on gold using surface plasmon resonance detection

Adsorption of a series of ethoxylated cationic surfactants at model surfaces of alkanethiol self-assembled monolayers was studied by the surface plasmon resonance technique. Model surfaces were tailor-made by choosing alkanethiols or mixtures of alkanethiols with methyl, hydroxyl, carboxyl, and trimethylammonium groups in terminal position. The ethoxylated and quaternized cationic surfactants having from 2 to 18 oxyethylene units, showed a decrease in adsorbed amount with increasing oxyethylene chain length for both hydrophobic and hydrophilic surfaces. On a negatively charged surface, containing carboxylate groups, the surfactant with only two oxyethylene groups adsorbed strongly due to electrostatic attraction and the adsorption increased with increasing amount of surface carboxylate groups. This work shows the usefulness of self-assembled alkanethiols on gold as a tool for performing surfactant adsorption studies on surfaces with variable hydrophobicity and charge.     

Adsorption of organic molecules on silica surface

The adsorption behaviour of various organic adsorbates on silica surface is reviewed. Most of the structural information on silica is obtained from IR spectral data and from the characteristics of water present at the silica surface. Silica surface is generally embedded with hydroxy groups and ethereal linkages, and hence considered to have a negative charged surface prone to adsorption of electron deficient species. Adsorption isotherms of the adsorbates delineate the nature of binding of the adsorbate with silica. Aromatic compounds are found to involve the pi-cloud in hydrogen bonding with silanol OH group during adsorption. Cationic and nonionic surfactants adsorb on silica surface involving hydrogen bonding. Sometimes, a polar part of the surfactants also contributes to the adsorption process. Styryl pyridinium dyes are found to anchor on silica surface in flat-on position. On modification of the silica by treating with alkali, the adsorption behaviour of cationic surfactant or polyethylene glycol changes due to change in the characteristics of silica or modified silica surface. In case of PEG-modified silica, adsolubilization of the adsorbate is observed. By using a modified adsorption equation, hemimicellization is proposed for these dyes. Adsorptions of some natural macromolecules like proteins and nucleic acids are investigated to study the hydrophobic and hydrophilic binding sites of silica. Artificial macromolecules like synthetic polymers are found to be adsorbed on silica surface due to the interaction of the multifunctional groups of the polymers with silanols. Preferential adsorption of polar adsorbates is observed in case of adsorbate mixtures. When surfactant mixtures are considered to study competitive adsorption on silica surface, critical micelle concentration of individual surfactant also contributes to the adsorption isotherm. The structural study of adsorbed surface and the thermodynamics of adsorption are given some importance in this review.     

Ethoxylated nonionic surfactants in hydrophobic solvent: interaction with aqueous and membrane-immobilized poly(acrylic acid)

Interaction between ethoxylated nonionic surfactants and poly(acrylic acid) (PAA) in aqueous solutions is well-documented in the literature. In the present study, pure ethoxylated surfactant solution in a hydrophobic solvent was permeated through a partially cross-linked PAA composite membrane to quantify the surfactant-PAA interaction in the heterogeneous system. Partitioning of the mixture of the surfactants (15-S-5) between the hydrophobic solvent and aqueous solution of PAA was also studied. The role of ethylene oxide group variation in the surfactant-PAA interaction for the heterogeneous system was established by performing experiments with pure surfactants having the same alkyl chain length but varying ethoxylate chain lengths. It was observed that the surfactants with a higher number of ethylene oxide groups per molecule exhibit stronger interaction with PAA. The literature data for adsorption of pure ethoxylated surfactants (C12E(n)) on a hydrophobic solid-water interface was correlated and compared with the data obtained in our study. It was calculated that resistance in terms of transfer of surfactant molecules from a hydrophobic solvent domain to PAA domain lowers the extent of PAA-surfactant interaction by an order of magnitude. Only 40% of available carboxyl groups were accessible for interaction with the ethoxylated nonionic surfactants due to diffusion limitations. Finally the pH sensitivity of the PAA-surfactant complex was verified by successful regeneration of the membrane on permeation of slightly alkaline water. The regeneration and reuse of membrane is especially attractive in terms of process development for nonionic surfactant separation from hydrophobic solvents.     

Adsorption of cationic and nonionic surfactants on a SiO<Subscript>2</Subscript> surface from aqueous solutions: 1. Adsorption of dodecylpyridinium bromide and Triton X-100 from individual solutions

Adsorption of cationic surfactant dodecylpyridinium bromide and nonionic surfactant Triton X-100 from aqueous solutions on the surface of SiO₂ particles is studied at various pH values (3.6, 6.5, and 10). The data on the adsorption are compared with the data on the wetting of quartz plates by solutions of these surfactants. Adsorption of both studied surfactants on the SiO₂ surface is greatly dependent on solution pH. The mechanism of adsorption of the cationic surfactant is shown to be changed when passing to the alkaline pH region. Triton X-100 does not demonstrate a substantial change in the adsorption mechanism in the pH range from 3.6 to 10.__________Translated from Kolloidnyi Zhurnal, Vol. 67, No. 2, 2005, pp. 274–280.Original Russian Text Copyright © 2005 by Kharitonova, Ivanova, Summ.     

Adsorption and heterocoagulation of nonionic surfactants and latex particles on cement hydrates

The adsorption of nonionic surfactants of the alkyl-phenol-poly(ethylene oxide) family and of acrylic latex particles on several anhydrous (but hydrating) or fully hydrated mineral phases of Portland cement was studied. No or negligible adsorption of the surfactant was observed. This was assigned to the ionized character of the surface silanol groups in calcium-silicate-hydrates and to the strongly ionic character of the OH groups in calcium hydroxide and in the calcium-sulfoaluminate-hydrates, which prevents the formation of surface-ethoxy hydrogen bonds. In contrast, provided they are properly stabilized by the surfactant, the latex particles form a loose monolayer on the surface of hydrating tricalcium silicate particles. The attractive interaction between the positive mineral surface and the negative latex surface appears to be the driving force for adsorption. In line with this, adsorption is reduced by sulfate anions, which adsorb specifically onto the silicate surface. Compared to tricalcium silicate, portlandite and gypsum interact only marginally with the latex particles. Our results show that the stability of the nonionic surfactant/latex/cement systems is essentially controlled by the latex colloidal stability and the latex-cement interactions, the surfactant having little direct interaction, if any, with the mineral surfaces.     

阴、阳离子表面活性剂混合体系在硅胶/水及硅胶/矿化水界面上的吸附

研究阴、阳离子表面活性剂混合体系(十二烷基氯代吡啶,辛基磺酸钠,辛基三乙基溴化铵/十二烷基苯磺酸钠)在硅胶,纯水和硅胶,矿化水界面上的吸附作用,探讨阴(阳)离子表面活性剂的存在对阳(阴)离子表面活性剂吸附作用的影响．结果表明,阴离子表面活性剂的存在基本不影响阳离子表面活性剂在带负电固体表面的吸附;而阳离子表面活性剂的存在却使本来吸附量就不大的阴离子表面活性剂在带负电的固体表面上不再吸附．在矿化水中阳离子表面活性剂的吸附量比在纯水中明显降低．从硅胶表面吸附机制解释了所得结果．     

Spectrophotometric studies of anionic dye-cationic surfactant interactions in mixture of cationic and nonionic surfactants

The interaction between an anionic dye C.I. Reactive Orange 16 (RO16) and a cationic surfactant dodecylpyridinium chloride (DPC) in mixtures of DPC and nonionic surfactants poly(oxyethylene)ethers (C(m)POE(n); m = 12, 16 and 18, n = 4, 10 and 23) are investigated spectrophotometrically in a certain micellar concentration range. The spectrophotometric measurements of dye-surfactant systems are carried out as function of mole fraction of surfactant at four different temperatures. For this reason, a typical system was occurred at 1.0 x 10(-2) mol l(-1) for surfactants and at 1.0 x 10(-4) mol l(-1) for dye concentrations. The formation of DPC-RO16 complex in the C(m)POE(n) solutions of different mole fractions in its micellar concentration range have been determined and compared to those obtained in the binary mixtures. From the spectrophotometric measurements has been observed that the addition of nonionic surfactant in to the mixture of DPC-RO16, causes a significant increase of the value of absorbance. This increase explains that the stability of DPC-RO16 complex is reduced in the presence of nonionic surfactant micelles. It can be seen from results; in mixed surfactant solutions, there are DPC-C(m)POE(n) and RO16-C(m)POE(n) interactions in addition to DPC-RO16 interaction. Since the solubilizaton of the DPC-RO16 complex has been appeared in the C(m)POE(n) solution, our results support the conclusion that adding C(m)POE(n) influences the hydrophobic-hydrophilic balance of the studied complex. Furthermore effect of the alkyl chain length and the number of poly(oxyethylene) in nonionic surfactant on values of absorbance have been investigated.