Characterization of ion-implanted 4H-SiC Schottky barrier diodes

Ion-implantation layers are fabricated by multiple nitrogen ion-implantations (3 times for sample A and 4 times for sample B) into a p-type 4H-SiC epitaxial layer. The implantation depth profiles are calculated by using the Monte Carlo simulator TRIM. The fabrication process and the I--V and C--V characteristics of the lateral Ti/4H-SiC Schottky barrier diodes (SBDs) fabricated on these multiple box-like ion-implantation layers are presented in detail. Measurements of the reverse I--V characteristics demonstrate a low reverse current, which is good enough for many SiC-based devices such as SiC metal--semiconductor field-effect transistors (MESFETs), and SiC static induction transistors (SITs). The parameters of the diodes are extracted from the forward I--V and C--V characteristics. The values of ideality factor n of SBDs for samples A and B are 3.0 and 3.5 respectively, and the values of series resistance R_\rm s are 11.9 and 1.0~kΩ respectively. The values of barrier height φ _\rm B of Ti/4H-SiC are 0.95 and 0.72 eV obtained by the I--V method and 1.14 and 0.93 eV obtained by the C--V method for samples A and B respectively. The activation rates for the implanted nitrogen ions of samples A and B are 2\% and 4\% respectively extracted from C--V testing results.     

Parameter extraction for a Ti/4H-SiC Schottky diode

Based on the MIS model, a simple method to extract parameters of SiC Schottky diodes is presented using the $I$-$V$ characteristics. The interface oxide capacitance $C_\i$ is extracted for the first time, as far as we know. Parameters of 4H-SiC Schottky diodes fabricated for testing in this paper are: the ideality factor $n$, the series resistance $R_{\rm s}$, the zero-field barrier height $\phi_{\rm B0}$, the interface state density $D_{\rm it}$, the interface oxide capacitance $C_\i$ and the neutral level of interface states $\phi_0$.     

A1/Ti/4H-SiC Schottky barrier diodes with inhomogeneous barrier heights

This paper investigates the current-voltage （I-V） characteristics of Al/Ti/4H-SiC Schottky barrier diodes （SBDs） in the temperature range of 77 K-500 K, which shows that Al/Ti/4H SiC SBDs have good rectifying behaviour. An abnormal behaviour, in which the zero bias barrier height decreases while the ideality factor increases with decreasing temperature （T）, has been successfully interpreted by using thermionic emission theory with Gaussian distribution of the barrier heights due to the inhomogeneous barrier height at the A1/Ti/4H-SiC interface. The effective Richardson constant A＊ = 154 A/cm2 . K2 is determined by means of a modified Richardson plot In（I0/T2） - （qσ）2/2（κT）2 versus q/kT, which is very close to the theoretical value 146 A/cm2 · K2.     

Al/Ti/4H-SiC Schottky barrier diodes with inhomogeneous barrier heights

This paper investigates the current-voltage (I-V) characteristics of Al/Ti/4H-SiC Schottky barrier diodes (SBDs) in the temperature range of 77 K-500 K,which shows that Al/Ti/4H-SiC SBDs have good rectifying behaviour.An abnormal behaviour,in which the zero bias barrier height decreases while the ideality factor increases with decreasing temperature (T),has been successfully interpreted by using thermionic emission theory with Gaussian distribution of the barrier heights due to the inhomogeneous barrier height at the Al/Ti/4H-SiC interface.The effective Richardson constant A =154 A/cm 2 · K 2 is determined by means of a modified Richardson plot ln(I 0 /T 2)-(qσ) 2 /2(kT) 2 versus q/kT,which is very close to the theoretical value 146 A/cm 2 · K 2.     

6H-SiC肖特基源漏MOSFET的模拟仿真研究

给出了一种新型SiC MOSFET——6H-SiC肖特基源漏MOSFET.这种器件结构制备工艺简单，避 免了长期困扰常规SiC MOSFET的离子注入工艺难度大、退火温度高、晶格损伤大，注入激活 率低等问题.分析了该器件的电流输运机理，并通过MEDICI模拟，给出了SiC肖特基源漏MOSF ET伏安特性以及其和金属功函数、栅氧化层厚度和栅长关系. 关键词： 碳化硅 肖特基接触 MOSFET 势垒高度     

Ohmic contacts of 4H-SiC on ion-implantation layers

The ohmic contacts of 4H-SiC are fabricated on nitrogen ion implanted layers made by performing box-like-profile implantation three and four times. Implantation parameters such as the standard deviation σ and the projection range R_p are calculated by the Monte Carlo simulator TRIM. Ni/Cr ohmic contacts on Si-face 4H-SiC implantation layers are measured by transfer length methods (TLMs). The results show that the values of sheet resistance R_sh are 30~kΩ /□ and 4.9~kΩ/□ and the values of specific contact resistance ρ_c of ohmic contacts are 7.1× 10^-4Ω.cm² and 9.5× 10^-5Ω.cm² for the implanted layers with implantation performed three and four times respectively.     

Temperature-dependent characteristics of 4H-SiC junction barrier Schottky diodes

The current-voltage characteristics of 4H-SiC junction barrier Schottky(JBS) diodes terminated by an offset field plate have been measured in the temperature range of 25-300 C.An experimental barrier height value of about 0.5 eV is obtained for the Ti/4H-SiC JBS diodes at room temperature.A decrease in the experimental barrier height and an increase in the ideality factor with decreasing temperature are shown.Reverse recovery testing also shows the temperature dependence of the peak recovery current density and the reverse recovery time.Finally,a discussion of reducing the reverse recovery time is presented.     

Breakdown characteristics of AIGaN/GaN Schottky barrier diodes fabricated on a silicon substrate

In this work, the breakdown characteristics of AlGaN/GaN planar Schottky barrier diodes （SBDs） fabricated on the silicon substrate are investigated. The breakdown voltage （BV） of the SBDs first increases as a function of the anodeto-cathode distance and then tends to saturate at larger inter-electrode spacing. The saturation behavior of the BV is likely caused by the vertical breakdown through the intrinsic GaN buffer layer on silicon, which is supported by the post-breakdown primary leakage path analysis with the emission microscopy. Surface passivation and field plate termination are found effective to suppress the leakage current and enhance the BV of the SBDs. A high BV of 601 V is obtained with a low on-resistance of 3.15 mΩ·cm^2.     

Breakdown characteristics of AlGaN/GaN Schottky barrier diodes fabricated on a silicon substrate

In this work, the breakdown characteristics of AlGaN/GaN planar Schottky barrier diodes(SBDs) fabricated on the silicon substrate are investigated. The breakdown voltage(BV) of the SBDs first increases as a function of the anodeto-cathode distance and then tends to saturate at larger inter-electrode spacing. The saturation behavior of the BV is likely caused by the vertical breakdown through the intrinsic GaN buffer layer on silicon, which is supported by the postbreakdown primary leakage path analysis with the emission microscopy. Surface passivation and field plate termination are found effective to suppress the leakage current and enhance the BV of the SBDs. A high BV of 601 V is obtained with a low on-resistance of 3.15 mΩ·cm2.     

Prediction of lateral barrier height in identically prepared Ni/n-type GaAs Schottky barrier diodes

We have identically prepared Ni/n-GaAs/In Schottky barrier diodes (SBDs) with doping density of 7.3 × 10¹⁵ cm⁻³. The barrier height for the Ni/n-GaAs/In SBDs from the current-voltage characteristics have varied from 0.835 to 0.856 eV, and ideality factor n from 1.02 to 1.08. We have determined a lateral homogeneous barrier height value of 0.862 eV for the Ni/n-GaAs/In SBD from the experimental linear relationship between barrier heights and ideality factors.     

Modeling of 4H--SiC multi-floating-junction Schottky barrier diode

This paper develops a new and easy to implement analytical model for the specific on-resistance and electric field distribution along the critical path for 4H-SiC multi-floating junction Schottky barrier diode. Considering the charge compensation effects by the multilayer of buried opposite doped regions, it improves the breakdown voltage a lot in comparison with conventional one with the same on-resistance. The forward resistance of the floating junction Schottky barrier diode consists of several components and the electric field can be understood with superposition concept, both are consistent with MEDICI simulation results. Moreover, device parameters are optimized and the analyses show that in comparison with one layer floating junction, multilayer of floating junction layer is an effective way to increase the device performance when specific resistance and the breakdown voltage are traded off. The results show that the specific resistance increases 3.2 mΩ·cm 2 and breakdown voltage increases 422 V with an additional floating junction for the given structure.     

High-temperature current conduction through three kinds of Schottky diodes

Fundamentals of the Schottky contacts and the high-temperature current conduction through three kinds of Schottky diodes are studied. N-Si Schottky diodes, GaN Schottky diodes and AlGaN/GaN Schottky diodes are investigated by I--V--T measurements ranging from 300 to 523~K. For these Schottky diodes, a rise in temperature is accompanied with an increase in barrier height and a reduction in ideality factor. Mechanisms are suggested, including thermionic emission, field emission, trap-assisted tunnelling and so on. The most remarkable finding in the present paper is that these three kinds of Schottky diodes are revealed to have different behaviours of high-temperature reverse currents. For the n-Si Schottky diode, a rise in temperature is accompanied by an increase in reverse current. The reverse current of the GaN Schottky diode decreases first and then increases with rising temperature. The AlGaN/GaN Schottky diode has a trend opposite to that of the GaN Schottky diode, and the dominant mechanisms are the effects of the piezoelectric polarization field and variation of two-dimensional electron gas charge density.     

4H-SiC Schottky barrier diodes with semi-insulating polycrystalline silicon field plate termination

Based on the theoretical analysis of the 4H-SiC Schottky-barrier diodes(SBDs) with field plate termination, 4H-SiC SBD with semi-insulating polycrystalline silicon(SIPOS) FP termination has been fabricated. The relative dielectric constant of the SIPOS dielectric first used in 4H-SiC devices is 10.4, which is much higher than that of the SiO2dielectric,leading to benefitting the performance of devices. The breakdown voltage of the fabricated SBD could reach 1200 V at leakage current 20 μA, about 70% of the theoretical breakdown voltage. Meanwhile, both of the simulation and experimental results show that the length of the SIPOS FP termination is an important factor for structure design.     

Ti/4H-SiC肖特基势垒二极管抗辐射特性的研究

本文采用γ射线、高能电子和中子对Ti/4H-SiC肖特基势垒二极管(SBD)的抗辐射特性进行了研究.研究发现对于γ射线和1 MeV电子辐照,-30 V辐照偏压对器件的辐照效应没有明显的影响.经过1 Mrad(Si)的γ射线或者1×l0¹³ n/cm²的中子辐照后,Ti/4H-SiC肖特基接触都没有明显退化;经过3.43×10¹⁴ e/cm²的1 MeV电子辐照后Ti/4H-SiC的势垒高度比辐照前轻微下降,这是由于高能 关键词： 碳化硅 肖特基 辐照 偏压     

Barrier height homogeneity for 4.5 kV 4H-SiC Schottky diodes

4.5 kV SiC Schottky diodes have been fabricated using Ni as the Schottky contact. A manufacturing yield of 40% is reached for the bigger area diodes (1.6×1.6 mm²) and of 70% for the smaller ones (0.4×0.4 mm²). The measured variations of barrier height and ideality factor with temperature do not agree with the thermionic model. This has been interpreted in terms of barrier height inhomogeneities using the Werner model. We extracted an average barrier height and its standard deviation . These two parameters are almost independent of the diode size. The variation of the barrier height distribution with field has also been investigated and shows a dependence similar to that of Schottky diodes realized from other semiconductor materials.     

Effect of diode size and series resistance on barrier height and ideality factor in nearly ideal Au/n type-GaAs micro Schottky contact diodes

Small high-quality Au/n type-GaAs Schottky barrier diodes (SBDs) with low reverse leakage current are produced using lithography. Their effective barrier heights (BHs) and ideality factors from current-voltage (I-V) characteristics are measured by a Pico ampere meter and home-built I-V instrument. In spite of the identical preparation of the diodes there is a diode-to-diode variation in ideality factor and barrier height parameters. Measurement of topology of a surface of a thin metal film with atomic force microscope (AFM) shows that Au-n type-GaAS SD consists of a set of parallel-connected micro and nanocontacts diodes with sizes approximately in a range of 100-200 nm. Between barrier height and ideality factor there is an inversely proportional dependency. With the diameter of contact increasing from 5 μm up to 200 μm, the barrier height increases from 0.833 up to 0.933 eV and its ideality factor decreases from 1.11 down to 1.006. These dependencies show the reduction of the contribution of the peripheral current with the diameter of contact increasing. We find the effect of series resistance on barrier height and ideality factor.     

Temperature-dependent characteristics of 4Hben SiC junction barrier Schottky diodes

The current-voltage characteristics of 4H-SiC junction barrier Schottky (JBS) diodes terminated by an offset field plate have been measured in the temperature range of 25-300 ℃. An experimental barrier height value of about 0.5 eV is obtained for the Ti/4H-SiC JBS diodes at room temperature. A decrease in the experimental barrier height and an increase in the ideality factor with decreasing temperature are shown. Reverse recovery testing also shows the temperature dependence of the peak recovery current density and the reverse recovery time. Finally, a discussion of reducing the reverse recovery time is presented.     

The modulation of Schottky barrier height of NiSi/n-Si Schottky diodes by silicide as diffusion source technique

This paper reports that the Schottky barrier height modulation of NiSi/n-Si is experimentally investigated by adopting a novel silicide-as-diffusion-source technique, which avoids the damage to the NiSi/Si interface induced from the conventional dopant segregation method. In addition, the impact of post-BF₂ implantation after silicidation on the surface morphology of Ni silicides is also illustrated. The thermal stability of Ni silicides can be improved by silicide-as-diffusion-source technique. Besides, the electron Schottky barrier height is successfully modulated by 0.11~eV at a boron dose of 10¹⁵~cm^-2 in comparison with the non-implanted samples. The change of barrier height is not attributed to the phase change of silicide films but due to the boron pile-up at the interface of NiSi and Si substrate which causes the upward bending of conducting band. The results demonstrate the feasibility of novel silicide-as-diffusion-source technique for the fabrication of Schottky source/drain Si MOS devices.     

High-performance 4H-SiC junction barrier Schottky diodes with double resistive termination extensions

4H-SiC junction barrier Schottky (JBS) diodes with a high-temperature annealed resistive termination extension (HARTE) are designed, fabricated and characterized in this work. The differential specific on-state resistance of the device is as low as 3.64 m ·cm2 with a total active area of 2.46×10-3 cm2 . Ti is the Schottky contact metal with a Schottky barrier height of 1.08 V and a low onset voltage of 0.7V. The ideality factor is calculated to be 1.06. Al implantation annealing is performed at 1250℃ in Ar, while good reverse characteristics are achieved. The maximum breakdown voltage is 1000 V with a leakage current of 9×10-5 A on chip level. These experimental results show good consistence with the simulation results and demonstrate that high-performance 4H-SiC JBS diodes can be obtained based on the double HARTE structure.     

Determination of the series resistance under the Schottky contacts of AlGaN/AlN/GaN Schottky barrier diodes

Rectangular AlGaN/AlN/GaN heterostructure field-effect transistors (HFETs) were fabricated,and the gate and the source of the HFETs consisted of AlGaN/AlN/GaN Schottky barrier diodes (SBDs).Based on the measured forward current-voltage and the capacitance-voltage characteristics of the AlGaN/AlN/GaN SBDs,the series resistance under the Schottky contacts (RS) was calculated using the method of power consumption,which has been proved to be valid.Finally,the method of power consumption for calculating R S was successfully used to study the two-dimensional electron gas electron mobility for a series of circular AlGaN/AlN/GaN SBDs.It is shown that the series resistance under the Schottky contacts cannot be neglected and is important for analysing and characterizing the AlGaN/AlN/GaN SBDs and the AlGaN/AlN/GaN HFETs.