Laser ion-acceleration scaling laws seen in multiparametric particle-in-cell simulations

The ion acceleration driven by a laser pulse at intensity I= 10(20)-10(22) W/cm(2) x (microm/lambda)(2) from a double layer target is investigated with multiparametric particle-in-cell simulations. For targets with a wide range of thickness l and density n(e), at a given intensity, the highest ion energy gain occurs at certain electron areal density of the target sigma = n(e)l, which is proportional to the square root of intensity. In the case of thin targets and optimal laser pulse duration, the ion maximum energy scales as the square root of the laser pulse power. When the radiation pressure of the laser field becomes dominant, the ion maximum energy becomes proportional to the laser pulse energy.     

Theory of laser ion acceleration from a foil target of nanometer thickness

A theory for ion acceleration by ultrashort laser pulses is presented to evaluate the maximum ion energy in the interaction of ultrahigh contrast (UHC) intense laser pulses with a nanometer-scale foil. In this regime, the ion energy may be directly related to the laser intensity and subsequent electron dynamics. This leads to a simple analytical expression for the ion energy gain under the laser irradiation of thin targets. Significantly higher energies for thin targets than for thicker targets are predicted. The theory is concretized with a view to compare with the results and their details of recent experiments.     

Dynamics of femtosecond laser-produced plasma ions

We investigated the ion laser-produced plasma plume generated during ultrafast laser ablation of copper and silicon targets in high vacuum. The ablation plasma was induced by ≈50 fs, 800 nm Ti:Sa laser pulses irradiating the target surface at an angle of 45°. An ion probe was used to investigate the time-of-flight profiles of the emitted ions in a laser fluence range from the ablation threshold up to ≈10 J/cm². The angular distribution of the ion flux and average velocity of the produced ions were studied by moving the ion probe on a circle around the ablation spot. The angular distribution of the ion flux is well described by an adiabatic and isentropic model of expansion of a plume produced by laser ablation of solid targets. The angular distribution of the ion flux narrows as the laser pulse fluence increases. Moreover, the ion average velocity reaches values of several tens of km/s, evidencing the presence of ions with kinetic energy of several hundred eV. Finally, the ion flux energy is confined in a narrow angular region around the target normal.     

Laser‐Triggered Proton Acceleration From Micro‐Structured thin Targets

By using relativistic massively parallel PIC code MANDOR, which features arbitrary target design including 3D micro‐structuring, a study of ion acceleration in short laser pulse interaction with different thin targets has been performed. Based on 3D simulation results it has been shown that micro‐structures on the front surface of thin plane targets increase a number and energy of hot electrons in comparison with that for the case of pure plain foils of optimal thickness. As a result, the energy of accelerated ions also increases up to 50%. However, the efficiency of ion acceleration from structured target reduces with laser pulse intensity increase, so that for laser pulses of ultra‐relativistic intensity a positive role of surface micro‐structuring diminishes. We have also studied to which extent a sub‐ps imperfection of the laser pulse shape, which smoothes the surface micro‐structures suppresses high‐energy ion generation. (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Transverse energy distributions in participant number model for ultra-relativistic heavy-ion collisions

The transverse energy distribution in ultra-relativistic heavy-ion collisions has been obtained as a convolution over the number of projectile and target participants. The latter is computed using the geometrical overlap model as a function of impact parameter. The data from 10 A GeV to 200 A GeV heavy ion beams on various targets in different pseudo-rapidity domains have been successfully described.     

Generation of a fast-ion beam upon the interaction of a multiterawatt picosecond laser pulse with a solid target

The parameters of fast particles generated upon the interaction of 10¹⁹ W/cm² laser pulses with solid targets are studied. The spatial and energy parameters of fast ions are investigated. It is found that approximately 1–3% of the laser energy is transformed to the energy of mega-and submegaelectronvolt ions at laser pulse intensities ≥10¹⁸ W/cm². It is shown experimentally that an ion beam is directed perpendicular to the target surface. The analytic and numerical simulations agree with experimental results and predict the propagation of fast electrons in the mirror direction with respect to the incident laser beam and of ions perpendicular to the target. The theoretical calculations are compared with the experimental output and spectra of fast electrons and ions.     

Near‐3‐MeV protons from target‐normal‐sheath‐acceleration femtosecond laser irradiating advanced targets

Advanced targets based on graphene oxide and gold thin film were irradiated at high laser intensity (10¹⁸–10¹⁹ W/cm²) with 50‐fs laser pulses and high contrast (10⁸) to investigate ion acceleration in the target‐normal‐sheath‐acceleration regime. Time‐of‐flight technique was employed with SiC semiconductor detectors and ion collectors in order to measure the ion kinetic energy and to control the properties of the generated plasma. It was found that, at the optimized laser focus position with respect to the target, maximum proton acceleration up to about 3 MeV energy and low angular divergence could be generated. The high proton energy is explained as due to the high electrical and thermal conductivity of the reduced graphene oxide structure. Dependence of the maximum proton energy on the target focal position and thickness is presented and discussed.     

Dynamics of ultrathin laser targets with optimal parameters

The set of equations describing the motion of a thin (compared to the wavelength) target in the field of a laser pulse that takes into consideration separate motion of the electron and ion layers is derived. In the case of strong Coulomb coupling between the layers, the set of equation of motions of the layers is reduced to the well-known light-sail equation containing a self-consistent coefficient of nonlinear reflection of laser radiation by a moving target. The optimal thickness of the laser target at which the target acquires maximum energy for given laser-pulse parameters is determined. It is shown that this thickness depends not only on laser intensity, but also on laser-pulse duration and the ratio of electron and ion masses. The growth rates of transverse instability of optimal targets under their intense acceleration are analyzed. It is demonstrated that instability does not develop in the currently experimentally accessible range of laser intensities and pulse durations between 100 and 200 fs.     

Dynamics of ions produced by laser ablation of ceramic Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and Al at 193 nm

We study the dynamics of ions produced upon ablation of Al and ceramic Al₂O₃ targets using nanosecond laser pulses at 193 nm (6.4 eV) as a function of the laser fluence from threshold up to 12 J cm⁻². An electrical (Langmuir) probe located at 40 mm from the target surface has been used for determining the ion yield and calculating the kinetic energy distributions. The results for both targets show the existence of a significant amount of ions having kinetic energies >200 eV (≈20% around threshold fluence), and kinetic energies are up to >1.5 keV. The results are related with the existence of direct photonionization processes caused by the photon energy of the laser being higher than the ionization potential of Al (5.98 eV). Comparison of the ion yield when ablating the two types of targets for fluences above threshold to data reported in the literature suggests that the magnitude of the yield and its threshold are parameters depending on the thermal properties of the target rather than on the laser wavelength. Around threshold, the different behavior of ion yield when ablating Al and Al₂O₃ targets suggests that the threshold for neutral aluminium and ion species in the case of ablation of the Al₂O₃ target must be similar.     

Advanced targets,diagnostics and applications of laser-generated plasmas

High-intensity sub-nanosecond-pulsed lasers irradiating thin targets in vacuum permit generation of electrons and ion acceleration and high photon yield emission in non-equilibrium plasmas. At intensities higher than 10¹⁵?W/cm² thin foils can be irradiated in the target-normal sheath acceleration regime driving ion acceleration in the forward direction above 1?MeV per charge state. The distributions of emitted ions in terms of energy, charge state and angular emission are controlled by laser parameters, irradiation conditions, target geometry and composition. Advanced targets can be employed to increase the laser absorption in thin foils and to enhance the energy and the yield of the ion acceleration process. Semiconductor detectors, Thomson parabola spectrometer and streak camera can be employed as online plasma diagnostics to monitor the plasma parameters, shot by shot. Some applications in the field of the multiple ion implantation, hadrontherapy and nuclear physics are reported.     

Interaction of intense ultrashort laser pulse with shell target

Based on numerical PIC modeling and an analytical model, we analyze the interaction of a short high-intensity laser pulse with homo- and heterogeneous (two-layer) shell targets. We show that the shell target is capable of focusing ions in a narrow region. In this case, the ion energy exceeds the ion energy for a flat infinite target of the same thickness. We propose to use the effect of focusing and cumulation of ions to implement the collision of ionic beams that counterpropagate from opposite sides of the sphere and to increase the yield of ion-ion reactions. The constructed model makes it possible to calculate the energy of the ion and the number of ions in the region of focusing.     

Energy Spectrum and Charge Composition of Ions of Laser-Produced Gd and Al Plasmas

The energy spectrum and the distribution of the total charge over the ion energy are studied for plasma produced by partially coherent radiation of the neodymium glass laser with a power density of ~10¹³ W/cm² in the focusing spot incident on continuous gadolinium (Gd) and aluminum(Al) plates. The spectra of plasma ions for gadolinium and aluminumtargets are presented at laser radiation energies of 2, 7, 20 J and 1 J, respectively. For the gadolinium target, an increase in the peak amplitudes in ion spectra with increasing influencing radiation energy and manifestations of higher-energy ions are observed. The difference in the ion emission for gadolinium and aluminum targets is also recorded at close radiation energies of 2 and 1 J, respectively.     

Lateral electron transport in high-intensity laser-irradiated foils diagnosed by ion emission

An experimental investigation of lateral electron transport in thin metallic foil targets irradiated by ultraintense (>or=10(19) W/cm2) laser pulses is reported. Two-dimensional spatially resolved ion emission measurements are used to quantify electric-field generation resulting from electron transport. The measurement of large electric fields ( approximately 0.1 TV/m) millimeters from the laser focus reveals that lateral energy transport continues long after the laser pulse has decayed. Numerical simulations confirm a very strong enhancement of electron density and electric field at the edges of the target.     

Laser-foil acceleration of high-energy protons in small-scale plasma gradients

Proton beams laser accelerated from thin foils are studied for various plasma gradients on the foil rear surface. The beam maximum energy and spectral slope reduce with the gradient scale length, in good agreement with numerical simulations. The results also show that the jxB mechanism determines the temperature of the electrons driving the ion expansion. Future ion-driven fast ignition of fusion targets will use multikilojoule petawatt laser pulses, the leading part of which will induce target preheat. Estimates based on the data show that this modifies by less than 10% the ion beam parameters.     

Eight MeV per charge state from 300 ps laser ion acceleration by using micrometric foils

Proton acceleration using high-intensity laser pulses, at 10¹⁶ W/cm² was studied irradiating different types of thin metal and plastic targets having 1-micron thickness. The maximization of the proton energy process was investigated optimizing the laser parameters, the irradiation conditions and the target properties. Employing 600–700 J laser pulse energy, a focalization inducing self-focusing effects and using targets with optimized thickness, it was possible to accelerate protons up to energies of above 8 MeV. The time-of-flight diagnostics has allowed to monitor the plasma properties and to control the ion acceleration process.     

Fractional ionization in plasmas produced by pulsed laser ablation

A pulsed infrared laser (Q-switched Nd:Yag) is employed to irradiate different metal targets having atomic number from Z =13 up to Z =82. The high laser fluence deposited on the metals, of the order of 100 v J/cm, produces high ablation yield and a plasma generation at the target surface. The emitted species are neutral and ionized atoms. Both components have been investigated in terms of yield emission, time-of-flight measurements and angular distribution. Results indicate that the main emission occurs mainly along the normal to the target surface, that the etching, at high fluence, is of the order of 10 v atoms/ pulse, that the atoms velocities are of the order of 10 v m/s, that the maximum ion energies are of the order of keV. During the laser irradiation, expanding and non-equilibrium plasma is produced in front of the target. The plasma has a fraction ionization depending by the metal species and generally within 10% and 80%. The plasma'temperature, at high fluence, can be theoretically calculated and reaches about 10 v K. The fractional ionization of the plasma, experimentally measured, has been investigated as a function of the laser fluence and of the energy binding of the target molecules. The ion emission yield is presented and discussed in view of the possibility to realize a laser ion source for ion accelerators.     

强激光斜入射半腔靶能量注入率测量

 在星光II单束激光条件下,通过新的方法、用热释电能量卡计和scientech378能量卡计测量了1.053 μm激光45°斜入射半腔靶及孔靶激光能量注入率,并估计了斜入射条件下的等离子体堵口速度。实验结果表明：相同参数条件下半腔靶与孔靶相比,激光能量注入率减少约10%。     

��B2.5-EIRENE�Ż�ƫ�����а����һ���ȸ���

运用数值模拟程序B2.5-EIRENE对偏滤器进行了概念设计和优化,通过优化偏滤器靶板的几何结构影响中性粒子的再循环和热沉积面积,继而影响偏滤器靶板上沉积的热负载。通过对两种偏滤器靶板的几何结构的模拟,重点分析了偏滤器靶板上沉积的热负载,靶板上沉积的总热通量和电子、离子热沉积分布,以及真空室第一壁上电子、离子和总热沉积分布等参数。     

Analytical model for ion acceleration by high-intensity laser pulses

We present a general expression for the maximum ion energy observed in experiments with thin foils irradiated by high-intensity laser pulses. The analytical model is based on a radially confined surface charge set up by laser accelerated electrons on the target rear side. The only input parameters are the properties of the laser pulse and the target thickness. The predicted maximum ion energy and the optimal laser pulse duration are supported by dedicated experiments for a broad range of different ions.