Effect of Salt and pH on the Hydrophobicity of Some Basic Ion-Pairing Agents

Abstract

The lipophilicity (hydrophobicity) of some alkyl and arylamines was determined with reversed-phase thin-layer chromatography using water:methanol 1:1 v/v eluent with salt and various buffers added to the system. The effect of various structural parameters of amines and that of the chromatographic conditions were assessed with stepwise regression analysis. Both salt concentration and pH influenced the lipophilicity of amines decreasing linearly with increasing salt concentration and pH. The lipophilicity values of alkylamines extrapolated to 0 pH showed a very low dependence on the length of alkyl chain. The PH sensitivity of alkylnmines depended linearly on the length of alkyl chain.     

THE PHOTOREDUCTION OF METHYLENE BLUE BY AMINES—II. AN INVESTIGATION OF THE DECAY OF SEMIREDUCED METHYLENE BLUE

Abstract— The decay of semireduced methylene blue (MB') formed in the photoreduction of the dye by aryl- and alkylamines was examined by flash photolysis. The second order decay of MB in methanol produced using arylamines and 1,4-diazabicyclooctane as photoreducing agents led to complete regeneration of the dye and amine. The rate constants for a series of N.N-dimethylanilines showed a small substituent effect ( p = 0.69 ± 0.16) compatible with recombination of MB' with arylamine derived radical cations. A study of the solvent effect on the recombination process revealed the importance of the stability of the radical cation toward the solvent and also indicated that the reaction approaches the rate of diffusion. The photoreduction of the dye by most alkylamines examined resulted in permanent bleaching of methylene blue. The second order decay of MB' produced using tertiary aliphatic amines led exclusively to formation of the leuco-dye with no apparent regeneration of methylene blue; this process was tentatively assigned to a reaction of MB' with α-amino radicals formed from the amine radical cation. It was concluded that the methylene blue-sensitized photooxidation of amines involves a Type I process and possible mechanisms are discussed.     

Facile size-regulated synthesis of silver nanoparticles by controlled thermolysis of silver alkylcarboxylates in the presence of alkylamines with different chain lengths

Controlled thermolysis of silver alkylcarboxylates with primary alkylamines was investigated as a facile synthetic method of silver nanoparticles. A series of silver alkylcarboxylates, C(7)H(15)COOAg, C(13)H(27)COOAg, and C(17)H(35)COOAg, have been prepared and the thermolysis of those silver alkylcarboxylates in the presence of various alkylamines, C(8)H(17)NH(2), C(12)H(25)NH(2), and C(18)H(37)NH(2), with no use of solvent was conducted at 120 or 180 degrees C for 5 h, providing spherical silver nanoparticles stabilized by alkylcarboxylates and alkylamines. The size and dispersibility of nanoparticles depend on the alkyl chain length of the precursors, alkylcarboxylates and alkylamines.     

Lipophilicity determination of some monoamine oxidase inhibitors: the effect of methanol and ammonium chloride.

The lipophilicity (RM value) of seventeen monoamine oxidase inhibitory drugs was determined by reversed-phase thin-layer chromatography, and the effect of salt concentration on the reversed-phase retention was studied by adding ammonium chloride to the eluent. Each drug exhibited regular retention behaviour, its RM value linearly decreasing with increasing concentration of methanol in the eluent. Ammonium chloride decreased the retention: the effect was higher at lower salt concentrations, which indicates that the phenomenon is of saturation character. The influence of ammonium chloride depended on the concentration of methanol (on the dielectric constant of the eluent) suggesting that methanol suppresses the dissociation of ammonium chloride resulting in a modified salting-in effect.     

Reaction of magnesium carbenoids with N-lithio arylamines: a novel method for generation of non-stabilized α-amino-substituted carbanions and a new synthesis of α-amino acid derivatives

Treatment of 1-chloroalkyl phenyl sulfoxides with a Grignard reagent at low temperature afforded magnesium carbenoids in quantitative yields. The magnesium carbenoids were found to be reactive with N-lithio alkylamines and N-lithio arylamines. The reaction with N-lithio alkylamines afforded an olefin, which was derived from dimerization of the magnesium carbenoid, in moderate yield. The reaction with N-lithio arylamines gave the adducts, α-amino-substituted carbanions, in good yields. From these intermediates, a novel synthesis of α-amino acid derivatives and N,N-dialkyl arylamines having a deuterium at the α-position was realized.     

Electrochemical oxidation of N-p-toluenesulfinamides

[reaction: see text] Contrasting and interesting electrochemical behavior is observed in anodic oxidation of N-substituted p-toluenesulfinamides under controlled current conditions. For sulfinamides derived from secondary alkylamines and primary arylamines, the N-sulfinyl group is removed and the corresponding amines are formed; for sulfinamides derived from primary alkylamines, sulfur oxidation yields the corresponding sulfonamides in good yields.     

The conformational stability of tactic poly(2-hydroxyethyl methacrylate) in aqueous salt solutions

The conformational stability of tactic poly(2-hydroxyethyl methacrylate) (PHEMA) in aqueous salt solutions was investigated by measurements of swelling, surface-free energy, and differential scanning calorimetry, as this polymer in water is sensitive in various electrolytes. In the case of inorganic salts, the major role for the salt effect is played by the anions, and the exposure of hydrophobic components at the PHEMA surface can be correlated with the increase of the degree of swelling. The influence of cations is considerably weaker. In the case of organic salts, tetraalkylammonium halides cause the chain extension more effectively with the increase of alkyl chain length in the cations. This result indicates that the breakdown of the hydrophobic parts in PHEMA provides an important clue on conformational stability. The amount of water molecules bound with the hydrophilic sites of tactic-PHEMA mainly depends on the chain extension and the hydration of cations. Since the sites in tactic-PHEMA influenced by the cation and the anion are different, their effects cause the conformational transition at a specific range of salt concentration. © 1993 John Wiley & Sons, Inc.     

Buchwald–Hartwig Amination of Nitroarenes

The Buchwald–Hartwig amination of nitroarenes was achieved for the first time by using palladium catalysts bearing dialkyl(biaryl)phosphine ligands. These cross‐coupling reactions of nitroarenes with diarylamines, arylamines, and alkylamines afforded the corresponding substituted arylamines. A catalytic cycle involving the oxidative addition of the Ar−NO₂ bond to palladium(0) followed by nitrite/amine exchange is proposed based on a stoichiometric reaction.     

Studies on Solid-Liquid Phase Transfer Equilibrium of Onium Salts(Ⅱ)

The present paper contains the effects of the ammonium ion, counter ion, solvent and anion being transferred on the solid-liquid phase transfer equilibrium constant of quaternary ammonium salts. The most striking difference between solid-liquid and liquid-liquid phase transfer equilibriums is that the length of alkyl chain shows a large effect on the latter but little on the former This means that the chain length affects only the hydrophobicity, rather than the lipophilicity.Keywords Quaternary ammonium salt, Phase transfer catalysis, Equilibrium constant, Hydrophobicity, Lipophilicity     

Geometry of chemically modified silica

The effect of alkyl chain length on adsorbent pore volume and void volume of HPLC columns is described. The results provide evidence that alkyl chains attached on silica surface are densely packed. A correlation of a decrease of pore volume with an increase of the alkyl modifier chain length was found. Effective molecular volume of bonded chains was found to be similar to the molecular volume of corresponding liquid alkanes. An absence of noticeable penetration of acetonitrile, methanol, or tetrahydrofuran molecules between bonded chains at any water-organic eluent composition was found.     

Conversion of propargyl alcohols to chloroallenes and arylalkynes using the TiCl4/R3N reagent system

Whereas the reaction of certain propargyl alcohols with TiCl4 in the presence of tertiary alkylamines gives the corresponding chloroallenes in 37-58% yields, reaction with the tertiary arylamines gives the corresponding arylalkynes in 68-77% yields.     

Lipophilicity determination of some fully protected peptides and amino acids

Summary The lipophilicity of 21 fully protected peptides and amino acids was determined by reversed-phase thin-layer chromatography. The R_M values decreased linearly with growing methanol concentration of the eluent. The sequence and conformation of molecular substructures did not significantly influence the lipophilicity. The presence of salt and ammonia in the eluent had a negligible impact on retention; the effect of the pH value was also low. In the presence of 1M and 2M acetic acid the retention of each compound considerably decreased. Acetic acid also changed markedly the selectivity. Our data suggest that the acetic acid has a preponderant role in changing the retention and selectivity of fully protected peptides and amino acids in reversedphase thin-layer chromatography.     

Salt effect on polymer solutions

The salt effect was investigated by measurements of viscosity, cloud point, and solubility of aqueous solutions of poly(vinyl alcohol—acetate) copolymers, as these copolymers in water are sensitive in various ways to addition of various electrolytes. The major role in the salt effect is played by the anions, and water-structure breaking anions produce salting-in of the copolymers. Tetraalkylammonium halides (bromides and iodides) cause salting-in of the copolymers more effectively with increase of size of the hydrophobic cations. The Setschenow equation does not hold for the polymers except for very dilute polymer concentration. In salts of monoalkyl-substituted anions (R? COONa and R? SO₄Na) and cations (R? NH₃Cl and Br), so long as the alkyl chain is short, the salt effect is also dominated by the anions. With increase of the alkyl chain length, sodium salts of the monoalkyl-substituted anions exert a stronger salting-in effect upon the polymers than chlorides of similar long-chain cations. The significance of the counteranions is suggested for the interaction of nonionic polymers and the long-chain cations. The action of the salts on the copolymers is discussed in terms of medium effects (change of the water structure) and of the binding effect of the single ions to the polymers.     

Orientation of tungsten trioxide thin films fabricated by sol–gel method using aqueous sols of colloidal layered tungstates

Oriented monoclinic WO₃ thin films were fabricated by sol–gel method using aqueous sols of colloidal layered tungstates. The colloidal tungstate sols were prepared by reacting different alkylamines with layered tungstic acid H₂WO₄ in water. With decreasing the alkyl chain length of the alkylamines, the colloidal layered tungstate became smaller. Alkylamines with a short alkyl chain provided transparent aqueous sols. Furthermore, the WO₃ thin films fabricated from the obtained aqueous sols had a high (100)-orientation. However, upon annealing H₂WO₄ crystals applied on a glass substrate with the tungstate layers parallel to the substrate, highly (001)-oriented WO₃ layers were obtained. Since both of the A- and C-planes of WO₃ have a similar structure to the layers of H₂WO₄, the orientation of the WO₃ thin films and layers probably resulted from the topotactic structural conversion of the tungstates. Interestingly, the preferential orientation of the thin films was dependent on the presence or absence of interlayer alkylamines in the tungstates.     

Palladium-catalyzed amination of aryl and heteroaryl tosylates at room temperature

Mild palladium-catalyzed aminations of aryl tosylates and the first aminations of heteroaryl tosylates are described. In the presence of the combination of L2Pd(0) (L = P(o-tol)3) and the hindered Josiphos ligand CyPF-t-Bu, a variety of primary alkylamines and arylamines react with both aryl and heteroaryl tosylates at room temperature to form the corresponding secondary arylamines in high yields with complete selectivity for the monoarylamine. These reactions at room temperature occur in many cases with catalyst loadings of 0.1 mol % and 0.01 mol % in one case, constituting the most efficient aminations of aryl tosylates by nearly 2 orders of magnitude. This catalyst is made practical by the development of a convenient method to synthesize the L2Pd(0) precursor. This complex is stable to air as a solid. In contrast to conventional relative rates for reactions of aryl sulfonates, the reactions of aryl tosylates are faster than parallel reactions of aryl triflates, and the reactions of aryl tosylates are faster than parallel or competitive reactions of aryl chlorides.     

Low-energy,low-temperature mass spectra: 4—Saturated alkylamines

Electron impact mass spectra obtained with 12.0 eV ionizing electrons at a source temperature of 350 K are reported for 32 saturated alkylamines. The abundances of molecular ions and primary daughter ions are discussed in energetic terms, and the effects of extending the alkyl chain or methylation of the nitrogen atom are considered. A contrast is found between the spectra of amines and those of the analogous alcohols and ethers.     

Aggregation of Sodium 2,4,5-(tri-n-Alkyl)-benzene Sulfonates in Aqueous Solution: Micellization and Microenvironment Characteristics Studied by Electron Paramagnetic Resonance and Steady-State Fluorescence Quenching

The aggregation behaviors and microenvironmental characteristics of five sodium tri-n-alkylbenzene sulfonates (STABS) micelles have been investigated by electron paramagnetic resonance (EPR) and steady-state fluorescence quenching (SSFQ) techniques. The results indicated that the micropolarity of STABS micelles was less sensitive to the increase of the alkyl chain length, and showed slight decrease with the increasing solution concentration. The microviscosity of STABS micelles increased with the increase of the long alkyl chain length, decreased with the increase of the short alkyl chain length, and exhibited little increase when increase the solution concentration. The salinity of added inorganic salt exhibited obvious effect on the decrease of micropolarity and increase of microviscosity of STABS. These results suggested that these different alkyl chains showed different effects on the micellization of STABS and the salinity's effect was even bigger.     

Lipophilicity determination of some nitrostyrene derivatives on RP-2, PR-8 and RP-18 layers

Summary The lipophilicity of 33 nitrostyrene derivatives was determined by reversed-phase thin-layer chromatography on RP-2, RP-8 and RP-18 layers using methanol as the organic phase. The R_M value of each compound linearly decreased with increasing concentration of the organic solvent. The retention strength of RP-2 layer was lower than that of RP-8 and RP-18 layers. Between the retention strength of RP-8 and RP-18 layers no significant difference was detected. Minor differences among the selectivities of the layers were also observed. The impact of the change of methanol concentration on the retention was higher on RP-2 than on RP-18 layers probably due to the sterically favourable interaction of methanol with the shorter alkyl groups on the silica surface.     

Degradation of crosslinked unsaturated polyesters in sub-critical water

The degradation of unsaturated polyesters crosslinked with styrene was performed in sub-critical water (SCW) in the absence and presence of organic additives. The unsaturated polyesters were de-crosslinked by hydrolysis of ester chains to form polystyrene derivatives on SCW treatment at 300 °C. With an increase in treating time, carboxylic acid groups in the polystyrene derivatives were turned into carboxylic anhydride groups in SCW. The de-crosslinking rate was much enhanced on SCW treatment in the presence of hydroxy compounds with a long alkyl chain and alkylamines, while carboxylic acids, benzenesulfonate salts, and quaternary ammonium salts were ineffective even though they had a long alkyl chain. The degree of de-crosslinking was reduced in the presence of diamines and amino acids because re-crosslinking at both ends of the additive molecules proceeded.     

AFM and electron microscopy study of the unusual aggregation behavior of metallosurfactants based on iron(II) complexes with bipyridine ligands

The aggregation behavior in water-rich solutions of five iron(II) complexes with alkylated derivatives of 2,2'-bipyridine was studied by electron microscopy (cryo-SEM, SEM, and TEM) and AFM. The results obtained by cryo-SEM on frozen colloidal solutions show that the morphology of the aggregates strongly depends on the length of the alkyl chains in the bipyridine ligands, with shorter alkyl chains forming rod-like structures, whereas for compounds with longer alkyl chains, only spherical structures were detected. The self-aggregates were further characterized by SEM and TEM. The results show that their overall morphology depends only on the length of the alkyl chain of the bipyridine ligands and that the samples show a broad size distribution. In addition, TEM and SEM were used to study the stability of the self-aggregates in solution, the effect of addition of methanol, and the temperature used in the preparation of the colloidal solutions. AFM studies of the aggregates either dried in ambient conditions or dehydrated by long drying under vacuum showed partially collapsed self-aggregates in the latter case, showing that the aggregates contain water in their core, indicating that the self-aggregation leads to vesicle-type structures.