Formation of mono-, bi-, and polyradicals upon reduction of poly(arylenesulfophthalides) by metallic lithium

The reduction of poly(biphenylenesulfophthalide) (1), poly(fluorenylenesulfophthalide) (2), and poly(terphenylenesulfophthalide) (3) by metallic lithium in DMSO was studied using UV-visible and ESR spectroscopies. The reduction of compounds 1 and 2 affords blue diamagnetic color centers with absorption bands at 568 and 350 nm (shoulder) for 1 and at 576 and 360 nm (shoulder) for 2. The color centers were attributed to quinoid structures of the Chichibabin"s hydrocarbon type, being biradicals in the ground singlet state. The spectra of compounds 1 and 2 also exhibit weak absorption bands at 420 nm, which are assigned to monoradicals of the triarylmethyl type. The reduction of compound 3, for which the formation of quinoid structures is energetically unfavorable, leads to polyradicals of the triarylmethyl type with a high content (100%) of unpaired electrons in the main polymer chain. These radicals are characterized by absorption bands at 430 nm (allowed transition) and 638 nm (forbidden transition). The paramagnetic centers in all polymers under study give singlet lines with g = 2.0028 and H 10 Oe in the ESR spectra. The color centers and radicals of the triarylmethyl type observed for the poly(arylenesulfophthalides) under study are assumed to be formed upon the dissociative electron transfer from lithium to the sulfophthalide cycles of the polymeric molecules. The PM3 calculations show a high electron affinity of the sulfophthalide cycle and a higher propensity of the fluorenyl bridge to form quinoid structures than that of the biphenyl bridge.     

Some chemical reactions in the polydiphenylenesulfophthalide—aniline—cyclohexanone system

Two main reactions were observed in the polydiphenylenesulfophthalide—aniline—cyclohexanone ternary system by¹³C NMR and IR spectroscopy: (1) condensation of aniline and cyclohexanone to give the corresponding anil; (2) opening of the sulfophthalide ring in the polymer under the action of aniline. Both reactions also take place in the corresponding binary mixtures, and they should be taken into account in studies of the color and paramagnetic centers in this ternary system. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 546–547, March, 1998.     

Color reactions of polyarylenesulfophthalides in aniline-cyclohexanone mixtures in air

Slow color reactions occur when some polyarylenesulfophthalides are dissolved in an aniline—cyclohexanone mixture; these reactions involve generation of triarylmethyl type radicals that were characterized by ESR and UV spectroscopy. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 389–391, February, 1997.     

Optical properties of a novel fluorene‐based thermally stable conjugated polymer containing pyridine and unsymmetric carbazole groups

A new diiodo monomer containing heterocyclic pyridine and carbazole groups was synthesized via Chichibabin reaction and used in the preparation of a conjugated polymer via Suzuki coupling approach. The conjugated polymer was highly soluble in common organic solvents such as NMP, THF, dichloromethane, chloroform, toluene, xylene, and benzene at room temperature. The polymer had high glass transition temperature at 191 °C and T_d10 at 434 °C in nitrogen atmosphere. The pristine polymer exhibited the UV–vis maximum absorption at 355 nm and shifted to 420 nm after protonation. The emission of the polymer in THF solution changed from the blue region with maximum peak at 400 nm to the yellow region with maximum peak at 540 nm after protonated by HCl, and the intensity of emission depended on the concentration of acid. The polymer also showed electrochromic behavior under applied voltage. The emission color of the polymer film changed from blue (435 nm) to yellow (570 nm) when 2.5 V bias voltage was applied. The polymer also exhibited write‐once and read‐many‐times (WORM) polymer memory effect with tristable states. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 991–1002, 2009     

The equivalence of bond-energy schemes and the determination of resonance energies

 It is argued that the preservation of algebraic equivalence between the Allen and Laidler bond-energy schemes for nonconjugated alkenes logically determines that the Allen scheme should apply to a classical structure of a conjugated hydrocarbon exactly as it stands, i.e. no additional parameters are needed. Extending the requirement of equivalence to conjugated alkenes implies that, in the Laidler scheme, the bond energy of the pure single CC bond in a conjugated system is a combination of the bond-energies of the semiconjugated and normal CC single bonds: E(C_d—C_d)=2E(C_d—C)−E(C—C). This result is a deduction and is not an independent hypothesis. The equivalence of the two schemes for conjugated hydrocarbons is demonstrated numerically, by calculating the resonance energies of some selected molecules by both methods. Received: 5 December 1999 / Accepted: 5 March 2000 / Published online: 5 June 2000     

Immobilization of porphyrins in poly(hydroxymethylsiloxane)

Three tetracationic porphyrins differing in the position of charged nitrogen atoms on the peripheral substituents — 5,10,15,20-tetrakis(N-methylpyridinium-4-yl)porphyrin (TMPyP4), 5,10,15,20-tetrakis(N-methylpyridinium-2-yl)porphyrin (TMPyP2), 5,10,15,20-tetrakis(4-trimethylammoniophenyl) porphyrin (TMAPP), and hydrophobic 5,10,15,20-tetraphenylporphyrin (TPP), were immobilized by adsorption and encapsulation in poly(hydroxymethylsiloxane) (PHOMS). The so prepared porphyrin-PHOMS composites were characterized by porosimetry, scanning electron microscopy, fluorescence and diffuse reflectance UV-VIS spectroscopy. It was found that porphyrins are immobilized in the PHOMS matrix in the free base monomer form Their irradiation produced singlet oxygen O₂(¹Δ_g) with the lifetime of 10–30 μs.     

Novel poly(pyridine imide) with pendent naphthalene groups: Synthesis and thermal,optical, electrochemical,electrochromic, and protonation characterization

A new diamine containing a pyridine heterocyclic group and a naphthalene substituent, 4-(2-naphthyl)-2,6-bis(4-aminophenyl) pyridine (NBAPP), was synthesized with the Chichibabin reaction and used in the preparation of poly(pyridine imide) by direct polycondensation with 4,4′-hexafluoroisopropylidenediphathalic anhydride in N-methyl-2-pyrrolidinone (NMP). The poly(pyridine imide) derived from diamine NBAPP with naphthalene substituents was highly organosoluble: it was soluble in tetrahydrofuran, NMP, N,N-dimethylacetamide (DMAc), N,N-dimethylformamide, and γ-butyrolactone at room temperature and in pyridine, dimethyl sulfoxide, and cyclohexanone upon heating at 70 °C. The poly(pyridine imide) was converted into lightly colored, optically transparent, flexible, and tough polyimide films via casting onto glass from a DMAc solution. This polymer exhibited good thermal stability (temperature of 10% weight loss = 527 °C) in air and high dielectric constants (as high as 4.20 at 1 kHz). The polyimide films had a tensile strength of 102 MPa and a tensile modulus of 1.8 GPa. As for the optical properties, the polymer exhibited UV–vis absorption bands in the region of 223–450 nm and possessed strong green-yellow fluorescence (500 nm) after being protonated with acid. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2367–2374, 2007     

Production of color centers in PMMA by ultrashort laser pulses

We report here the creation of color centers in commercial, transparent PMMA samples by ultrashort pulses from a Ti:Sapphire laser emitting at 800 nm, with spatial control. Although the 800 nm photon energy is not sufficient to ionize the polymer, the centers are created following a multiphotonic absorption that causes the ionization. We propose that the free electrons quivering motion on the pulse electric field displaces atoms from its equilibrium positions, creating free radicals and double bonds that coalesce into color centers. The absorption and emission spectra of the centers were measured, but a dose-like curve could not be built due to the presence of damages created along with the centers that scatter the excitation and emission lights due to the commercial sample's poor optical quality.     

Absolute rate constants of decay of aryl-substituted carbonyl oxides

The decay kinetics of a series of carbonyl oxides (CbO)—4-methylbenzophenone oxide, 2,5-dimethylbenzophenone oxide, 4-chlorobenzophenone oxide, 2-bromobenzophenone oxide, and acetophenone oxide—were studied by the pulse photolysis technique in acetonitrile, benzene,n-decane, andn-pentane. The absorption spectra were studied, and the absorption coefficients and absolute rate constants of CbO decay were determined. The absorption maxima observed in the spectra of carbonyl oxides range within 405±25 nm. The decay rate constant was found to depend on both the CbO structure and the medium. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 4, pp. 677–681, April, 1999.     

Photoreactive Polynorbornene Bearing 4-(Diphenylamino)benzoate Groups: Synthesis and Application in Electroluminescent Devices

Summary. A new fluorescent and photoreactive polymer, poly-(endo,exo-bis(4-(4-(diphenylamino)benzoyloxy)benzyl)bicyclo[2.2.1]hept-5-ene-2,3-dicarboxylate), was prepared by ring opening metathesis polymerization. This polymer combines the photoreactivity of aryl esters with the fluorescence properties of derivatives of 4-(diphenylamino)benzoic acid. The polymer exhibits blue photo- and electroluminescence and can be used as active layer in organic light emitting devices (OLED). Upon irradiation with UV light (254 nm) the aromatic ester groups undergo decarboxylation, which is accompanied by the loss of photoluminescence. Photolithographic patterning of the polymer surface was used to obtain structured fluorescent surfaces and patterned OLEDs.     

Photoreactive Polynorbornene Bearing 4-(Diphenylamino)benzoate Groups: Synthesis and Application in Electroluminescent Devices

A new fluorescent and photoreactive polymer, poly-(endo,exo-bis(4-(4-(diphenylamino)benzoyloxy)benzyl)bicyclo[2.2.1]hept-5-ene-2,3-dicarboxylate), was prepared by ring opening metathesis polymerization. This polymer combines the photoreactivity of aryl esters with the fluorescence properties of derivatives of 4-(diphenylamino)benzoic acid. The polymer exhibits blue photo- and electroluminescence and can be used as active layer in organic light emitting devices (OLED). Upon irradiation with UV light (254 nm) the aromatic ester groups undergo decarboxylation, which is accompanied by the loss of photoluminescence. Photolithographic patterning of the polymer surface was used to obtain structured fluorescent surfaces and patterned OLEDs.     

Template synthesis of N—F-codoped TiO<Subscript>2</Subscript> nanotubes with high visible light activity

A series of highly ordered N—F-codoped TiO₂ nanotubes were synthesized with a simple template technique and the obtained samples were detected by FE-SEM and XPS. The UV-Vis absorption spectrum showed that after N—F-codoping, TiO₂ nanotubes had a new absorption band at 425 nm, leading to a photoresponse in the visible region. These modified nanotubes showed a significant visible-induced photocatalytic activity for the degradation of methylene blue in aqueous solution.     

Solvent‐induced reversible color changes in block copolymer films and new locking method of structural colors

The well‐defined polystyrene‐block‐poly(4‐vinylpyridine) [PS‐block‐P4VP (SV1); lamellar morphology] and polyisoprene‐block‐poly(α‐methyl styrene) [PI‐block‐PMS (IMS1); PI spherical morphology] diblock copolymers were prepared by sequential anionic polymerization techniques. The segregated chains in the P4VP lamellar layers of the SV1 film (PS lamellae: 41 nm; P4VP lamellae: 51 nm) were crosslinked with 1,4‐dibromobutane. This crosslinked film was insoluble in organic solvents such as benzene and chloroform (CHCl₃) and exhibited various structural colors under the swollen state. The IMS1 film (body‐centered cubic lattice, diameter of PI spheres: 53 nm) was soaked in the mixture of CHCl₃/hexane (1 : 10, v/v). This solvent system resulted in the swelling of PI spherical domains. The transmitted and reflected light color through the swollen film changed to a deep blue. Such color changes were reversible upon swelling in solvent and evaporation of the solvent. Subsequently, photofunctional diethyldithiocarbamate (DC) groups were introduced into the PS block of the parent block copolymer IMS1 by means of polymer reactions. The locking of the cubic lattice was performed with living radical graft copolymerization from DC groups of swollen as‐cast film in methyl methacrylate (MMA) under UV irradiation. The locking of structural colors such as blue and green was also achieved, varying the content of poly(methyl methacrylate) (PMMA) grafted chains. Copyright © 2005 John Wiley & Sons, Ltd.     

Dimerization and Coordination Properties of Zinc(II)tetra-4-alkoxybenzoyloxiphthalocyanine in Relation to DABCO in <Emphasis Type="Italic">o</Emphasis>-Xylene and Chloroform

For the first time the interactions between zinc(II)tetra-4-alkoxybenzoyloxiphthalocyanine (Zn(4—O—CO—C₆H₄—OC₁₁H₂₃)Pc) and 1,4-diazabicyclo[2.2.2]octane (DABCO) in o-xylene and chloroform have been studied by calorimetric titration and NMR and electron absorption spectroscopic methods. It has been found that in o-xylene at concentrations of Zn(4—O—CO—C₆H₄—OC₁₁H₂₃)Pc higher than 6×10⁻⁴ mol⋅L⁻¹ π–π dimers species are formed (λ _max= 685 nm). Additions of DABCO to the solution up to mole ratio 1 : 8 (Zn(4—O—CO—C₆H₄—OC₁₁H₂₃)Pc : DABCO) lead to a shift of the aggregation equilibrium towards monomer species due to formation of monoligand axial complexes. Further increasing the DABCO concentration results in formation of Zn(4—O—CO—C₆H₄—OC₁₁H₂₃)Pc—DABCO—Zn(4—O—CO—C₆H₄—OC₁₁H₂₃)Pc sandwich dimers (λ _max= 675 nm).     

Spectral study of the complexation of Nd(III) with glutathione reduced (GSH) in the presence and absence of Zn(II) in aquated organic solvents

Studies on the difference in energy parameters and comparative absorption spectrophotometry involving 4f-4f transitions on Nd(III) and glutathione reduced (GSH) in the absence and presence of Zn(II) have been carried out in aquated organic solvents (50 : 50) like methanol, dioxane, acetonitrile and dimethylformamide. Variations in the spectral energy parameters — Slater-Condon (F _k ) factor, Lande spin-orbit coupling constant (ξ4f), nephelauxetic ratio (β), bonding parameter (b ^1/2 ) and percent covalency (δ) — are calculated and correlated with binding of Nd(III) with GSH in presence and absence of Zn(II).     

Visible light absorption by various titanium dioxide specimens

A set of heat-induced and photoinduced absorption spectra of various compositions of Degussa P25 TiO2 and different polymers has been examined. The spectra are described as the sum of overlapping absorption bands (ABs) with maxima at 2.90 eV (427 nm, AB1), 2.55 eV (486 nm, AB2), and 2.05 eV (604 nm, AB3); the spectra correlate entirely with the experimentally observed absorption spectra after the reduction of TiO2. Absorption spectra of visible-light-active TiO2 photocatalysts reported recently in the literature have also been analyzed. Relatively narrow absorption spectra are very similar and independent of the method of photocatalyst preparation. The average absorption spectrum can be described reasonably well by the sum of the two absorption bands AB1 and AB2. It is argued that visible light activation of TiO2 specimens (anion-doped or otherwise) implicates defects associated with oxygen vacancies that give rise to color centers displaying these absorption bands and not to a narrowing of the original band gap of TiO2 (EBG approximately 3.2 eV, anatase) through mixing of dopant and oxygen states, as has been suggested recently in the literature.     

Electronic Structure of Cu(II) Complexes with N,N′-Disalicylidene-1,2-cyclohexanediamine and N,N′-Disalicylidenetrimethylenediamine

Summary.  The electronic absorption and X-ray photoelectron spectra of N,N′-disalicylidenetrimethylenediaminatocopper(II) ([Cu(saltn)]) and N,N′-disalicylidene-trans-1,2-cyclohexanediaminatocopper(II) ([Cu(salchx)]) were measured. From these results and from informations derived from MO calculations the electronic structure of the complexes was clarified. Each electronic absorption band which can be assigned to the ππ^ast; or ML/LMCT transition of [Cu(saltn)] or [Cu(salchx)] observed in the wavelength region of 450–200 nm appears at the almost same frequency as the corresponding band of N,N′-disalicylideneethylenediaminatocopper(II) ([Cu(salen)]) in solution. The LLCT bands (the intramolecular CT band between two π-electronic systems separated by saturated hydrocarbon chains such as ) also appear at nearly the same positions (ca. 245 nm) for [Cu(salchx)], [Cu(saltn)], and [Cu(salen)]. The locations of the dd transition and the intensity of the ML/LMCT transition of [Cu(saltn)] are significantly different from those of [Cu(salen)] and [Cu(salchx)]. These differences may arise from the strengths of the interaction between metal and ligand. Received August 21, 2001. Accepted (revised) October 20, 2001     

Reversible isomerization of chromogenic dimers and the nature of azulene chromaticity

The spectra of azulene solutions in siloxane and heptadecane were studied. The VIS band (435–714 nm) associated with the color blue was shown to transform reversibly as a result of a temperature increase and to assume a likeness to the less intensive VIS band typical for solutions in polar ethanol and dibutyl phthalate. It was concluded that supramolecular dimers rather than individual molecules are the chromogens of azulene, just as in the case of phthalocyanine, triphenylmethane, xanthene, and thiazine dyes. Clar’s conclusions regarding the nature of the visible band of azulene absorption and the mechanism of reversible thermal discoloration of azulene solutions in high-boiling-point hydrocarbons are consequently wrong. It was established that the thermochromism of azulene solutions is actually not associated with the isomerization of azulene molecules into nonplanar nonaromatic molecules but with the reversible isomerization of dimeric structures, accompanied by a change in the positions of the aromatic molecules relative to one another. The corresponding equilibrium is somewhat endothermic: ΔH = 6.6 kJ/mol, ΔG ^o ≈ − 1.45 kJ/mol. Based on these results, it was concluded that light absorption changes the energetic state of the dimeric structures (transition S _D→ S _D^*) without leading to electron transfer in single molecules according to the scheme S ₀ →S ₁. That is, the traditional idea that Kasha’s law is violated when azulene fluoresces is incorrect, since the radiation comes from the S ₁ level and not from the S ₂ level, as is stated in the literature.     

Morphology and photoluminescence study of titania nanoparticles

Titania nanoparticles are prepared by sol–gel chemistry with a poly(ethylene oxide) methyl ether methacrylate-block-poly(dimethylsiloxane)-block-poly(ethylene oxide) methyl ether methacrylate triblock copolymer acting as the templating agent. The sol–gel components—hydrochloric acid, titanium tetraisopropoxide, and triblock copolymer—are varied to investigate their effect on the resulting titania morphology. An increased titania precursor or polymer content yields smaller primary titania structures. Microbeam grazing incidence small-angle X-ray scattering measurements, which are analyzed with a unified fit model, reveal information about the titania structure sizes. These small structures could not be observed via the used microscopy techniques. The interplay among the sol–gel components via our triblock copolymer results in different sized titania nanoparticles with higher packing densities. Smaller sized titania particles, (∼13–20 nm in diameter) in the range of exciton diffusion length, are formed by 2% by weight polymer and show good crystallinity with less surface defects and high oxygen vacancies.